Aerocron 2100 Anionic Epoxy Primer
|
|
- Anabel Evans
- 6 years ago
- Views:
Transcription
1 Anionic Epoxy Primer TECHNICAL DATA SHEET Product Description is an anionic epoxy electrocoat primer technology designed to provide optimal corrosion protection over aircraft substrates. It is a chrome-free, water-based technology that is applied via an immersion process which uses electrical current to deposit the coating onto a conductive substrate. The electrocoat process also provides advantages over spray technology with increased productivity, increased transfer efficiency rate on parts, full automation capabilities, lower waste disposal costs, and uniform film thickness which results in an overall weight reduction. >95% Material Usage Total paint coverage on complex parts Easy mil thickness control Lower VOC Water-based technology No chrome or other heavy metals Full line automation (increased productivity) Components Components: Specifications ACRS2100 (resin component) ACPP2120 (pigment paste) ACCP2140 (anticorrosion paste) Note: Please consult the Process Control Document for blend ratio. Anodic epoxy primer is qualified to: AMS 3144 Type I Class N Note: PPG Aerospace recommends you check the most recent specification QPLs for updated information. Page 1
2 Anionic Epoxy Primer Product Compatibility: primer is compatible with the following topcoat specifications: AIMS GC130N BAMS GP110AEF BMS Type II MIL-PRF Type I & Type IV BS2X34B MMS420 DMS2115 Note: If a topcoat is required, has been tested and is compatible with most solvent-borne and waterborne primers and topcoats. Contact PPG Aerospace Coatings Platform regarding surface preparation prior to application of primer or topcoat. Surface Preparation and Pretreatments primer can be applied over clean, properly prepared aluminum surfaces. Aluminum surfaces should be treated with an alkaline degreasing step followed by an acid deoxidization. Additional pretreatment processing steps including materials conforming to MIL-DTL-5541 or equivalent can be utilized. Contact your PPG Aerospace coatings platform regarding procedures for surface preparation and subsequent pretreatment. Instructions for Use Mixing Instructions: Consult the Process Control Document. Induction Time: Not Required Application Guidelines Application: Consult the Process Control Document. Page 2
3 Anionic Epoxy Primer Theoretical Coverage: 12 square meters/liter at 25 microns dry film (504 square feet/gallon at 1 mil dry film) Recommended dry film thickness; 15 to 30 microns (0.6 to 1.2 mils) Dry Film Density: 1.28 grams/cubic centimeter (10.6 pounds/gallon) Dry Film Weight: 32 grams/square meter at 25 microns dry film (0.007 pounds/square foot at 1 mil dry film) Note: Value based on a bath composition of 20% solids and 0.2 p/b ratio. Physical Properties (product) Color: Gray Gloss: Not Applicable Bake Condition: Minimum 30 minutes at 93 C - 98 C (200 F F) metal temperature. After thermal bake parts are fully cured and can be handled without any dry to touch/ tape or fly restrictions. VOC VOC: Mixed, ready for use VOC (EPA method 24) ACRS2100 ACPP2120 ACCP grams/liter 265 grams/liter 150 grams/liter 445 grams/liter Page 3
4 Anionic Epoxy Primer Flash point closed cup: ACRS2100 ACPP2120 ACCP2140 >93 C (>200 F) 64 C (147 F) 68 C (155 F) Shelf Life: 12 months from date of manufacture to most OEM material specifications. Consult the specification to verify shelf life requirements. Note: Shelf life is provided for original, unopened containers. Note: The application and performance property values above are typical for the material, but not intended for use in specifications or for acceptance inspection criteria because of variations in testing methods, conditions and configurations. Storage Recommendations Inspect the condition of the container to ensure compliance. The material should be stored at temperatures between 7 C to 32 C (45 F to 90 F) to ensure shelf life. Note: When procuring to a qualified material specification, follow those storage instructions. Page 4
5 Anionic Epoxy Primer Health Precautions This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. An SDS is available on request. Avoid overexposure. Obtain medical care in case of extreme overexposure. For industrial use only. Keep away from children. Additional information can be found at: For sales and ordering information call the local PPG office at the numbers listed below: Asia Pacific ASC Australia Tel 61 (3) Fax 61 (3) ASC Japan Tel Fax ASC South East Asia Tel Fax ASC Suzhou Tel (86-512) Fax (86-512) Europe and Middle East ASC Central Europe Tel 49 (40) Fax 49 (40) ASC Middle East & India Tel (971) Fax (971) ASC North Europe Tel 44 (0) Fax 44 (0) ASC South Europe Tel 33 (0) Fax 33 (0) ASC Tianjin Tel (86-022) Fax (86-022) Americas 1 (818) or AEROMIX Aerocron is a trademark of PRC-DeSoto International, Inc. All recommendations, statements, and technical data contained herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. User shall rely on his own information and tests to determine suitability of the product for the intended use and assumes all risks and liability resulting from his use of the product. Seller s and manufacturer s sole responsibility shall be to replace that portion of the product of this manufacturer which proves to be defective. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss, or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding upon the manufacturer or seller. PRC-DeSoto International, Inc San Fernando Road Sylmar, CA Issue Date: 8/15 Lit: 4173 Page 5
Excellent adhesion Superior gloss retention Excellent fluid resistance Improves clean ability Service temperature -54 C to 177 C (-65 F to 350 F)
Desothane HS Gloss Military Topcoat TECHNICAL DATA SHEET Product Description Desothane HS gloss military topcoat is a high solids coating used to protect the exterior of aircraft. It is used over pigmented
Desofill HS CA8620TG Sanding Surfacer
TECHNICAL DATA SHEET Product Description Desofill HS,, sanding surfacer is a trowelable grade, chromate-free, high solids coating. It is used to cover rivets and seams, and fill in the irregularities and
Mix ratio (by volume): (base component) (activator component)
Super Koropon Fluid Resistant Interior Primer TECHNICAL DATA SHEET Product Description Super Koropon fluid resistant conventional solids epoxy coating. This high performance primer is used to protect the
Water-borne 0 VOC May be applied direct to aluminum Strips easily with BMS Type II alkaline cleaner and water rinse
Low VOC Alkali Strippable Coating TECHNICAL DATA SHEET Product Description alkali strippable coating is a water-borne, single component temporary protective coating for use on aircraft and ground support
Mix ratio (by volume): (base component) (activator component) (thinner component)
TECHNICAL DATA SHEET Product Description DeSoto High Temperature urethane primer is a heat resistant coating that can withstand an operating temperature of 232 C (450 F). is used over aluminum and composite
Compatible with epoxy primers Excellent fluid resistance Service temperature -54 C to 177 C (-65 F to 350 F)
DeSoto Epoxy Topcoat Untinted White TECHNICAL DATA SHEET Product Description Components DeSoto epoxy topcoat untinted white is a chemically cured hydraulic fluid resistant coating. was designed for use
Mix ratio (by volume): CA8020 (base component) CA8020DX (activator component)
Desothane HS Semi-Gloss Topcoat TECHNICAL DATA SHEET Product Description Desothane HS semi-gloss topcoat is a high solids polyurethane used to protect the exterior of aircraft. is designed to be applied
Mix ratio (by volume): 529K002 (base component) 910K021 (activator component)
TECHNICAL DATA SHEET Product Description DeSoto high temperature epoxy topcoat can withstand an operating temperature of up to 204 C (400 F). It is used over high temperature coatings such as 519X303 and
Mix ratio (by volume): CA8000/B900A (base component) CA8000B (activator component) Grade D BMS Type II Class B.
Desothane HS Clear Topcoat TECHNICAL DATA SHEET Product Description Desothane HS clear topcoat is a high solids polyurethane used to protect the exterior of aircraft. It is designed to be applied over
Mix ratio (by volume): CA9000/XXXXX (base component) CA9000B (activator component) CA9000C (thinner component) Kit yield
Desothane HD Basecoat TECHNICAL DATA SHEET Product Description Desothane HD polyurethane basecoat is designed to give improved hide and reduced process flow time in combination with long pot life and longer
SC-1090 Water-Borne Preservation Topcoat. SC-1090 meets the following specification: MIL-PRF-6799 Type II Class 5
Water-Borne Preservation Topcoat TECHNICAL DATA SHEET Product Description is a preservation topcoat designed to be used in conjunction with SC-1074A-2, SC-1074B-1 or SC-1074B-2 peelable preservation basecoats
TECHNICAL DATA SHEET SC SC White Peelable Preservation Topcoat. Product Description. Components. Surface Preparation and Pretreatments
White Peelable Preservation Topcoat TECHNICAL DATA SHEET Product Description is preservation topcoat designed to be used in conjunction with SC-1074A- 2, SC-1074B-1 or SC-1074B-2 peelable preservation
TECHNICAL DATA SHEET CA8800 SR. Desothane CA8800 SR Solar Reflective Topcoats. Product Description. Components
Desothane Solar Reflective Topcoats TECHNICAL DATA SHEET Product Description Desothane Solar Reflective Topcoats are buffable polyurethane coatings used to protect the exterior of aircraft and reduce solar
TECHNICAL DATA SHEET SC SC-1071 Clear Peelable Temporary Protective Coating. Product Description. Components
Clear Peelable Temporary Protective Coating TECHNICAL DATA SHEET Product Description is a clear, peelable, water dispersion coating formulated for protection and masking of plastic, glass and painted surfaces.
CA7041 HS Polyurethane Primer. Mix Ratio (by volume) CA7041 (Base) 4 parts CA7041B (Activator) 1 part
HS Polyurethane Primer TECHNICAL DATA SHEET Product Description is a two pack, low VOC polyurethane primer, suitable for application on pretreated aluminium. is designed for use on military vehicles and
Celoflex 95 Erosion Resistant Polyurethane Topcoat. Excellent fluid and erosion resistance Conventional solids Excellent UV resistance
Erosion Resistant Polyurethane Topcoat TECHNICAL DATA SHEET Product Description Celoflex 95 is a polyurethane topcoat designed to provide erosion resistance on radomes and leading edges. is intended for
5441 PU66 4H PU Topcoat Gloss. 0730/9000 (Activator)
PU66 4H PU Topcoat Gloss TECHNICAL DATA SHEET Product Description polyurethane gloss topcoat of the PU66 range, designed to be applied as a decorative colour or touch-up for exterior aircraft over recently
5461 PU66 8H NL Topcoat Semi Gloss
TECHNICAL DATA SHEET Product Description is a two-component flexible polyurethane topcoat of the PU66 range, designed for internal / external protection and decoration of aircraft structures. Conventional
Water-based Non-flammable Non-toxic Excellent tensile strength and elasticity Easy to remove. PPG A Blue is a 1-component, ready to use product.
Peelable Temporary Protective Coating TECHNICAL DATA SHEET Product Description is a sprayable, peelable, water dispersion coating formulated for protection of acrylic both flat and formed, from damage
TECHNICAL DATA SHEET EC75. EC75 Epoxy Topcoat. Product Description. Components. Specifications
Epoxy Topcoat TECHNICAL DATA SHEET Product Description Components is a two pack, epoxy topcoat designed to provide protection of internal structures of aircraft and land based equipment. Excellent adhesion
CA8050 Quick Dry Erosion Resisting PU Coating
Quick Dry Erosion Resisting PU Coating TECHNICAL DATA SHEET Product Description Components is a two pack, polyurethane erosion resisting coating developed for the protection of strike areas and leading
TECHNICAL DATA SHEET TR TR-4995 Temporary Sprayable Masking. Product Description. Components. Surface Preparation and Pretreatments
Temporary Sprayable Masking TECHNICAL DATA SHEET Product Description Components temporary sprayable masking is a water-based masking compound that forms a tough, clear plastic film with controlled adhesion
5544/9000 Flame Retardant UV Resistant Varnish Matt. Excellent UV resistance Increased flame resistance Suitable for use on interior wooden components
Flame Retardant UV Resistant Varnish Matt TECHNICAL DATA SHEET Product Description is a two component, transparent, matt acrylic urethane varnish. Designed to provide UV protection to external aircraft
N58479/T508 Polyester Filler. High viscosity Excellent sandability Ambient curing Long pot life enables filling of large areas using a single mix
TECHNICAL DATA SHEET Product Description is a two component polyester based filler for direct application to metal and composite substrates, for filling of holes and surface imperfections. High viscosity
ERC5 Erosion Resisting Polyurethane Coating
TECHNICAL DATA SHEET Product Description Components is a two pack, polyurethane erosion resisting coating developed for the protection of strike areas and leading edges of aircraft. When applied over the
CA8300B (Activator) CA8300C1 or C2 (Reducer) CA8300 meets the performance requirements of: MIL-PRF-85285
Desothane HS Polyurethane Topcoat Gloss TECHNICAL DATA SHEET Product Description is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components
5015 PU Surfacer Grey
TECHNICAL DATA SHEET Product Description 5455/1235 is a two component, polyurethane filler, designed to improve the appearance of pretreated aluminium pressings and composites. Excellent flexibility Water
CA8310B (Activator) CA8321 meets the performance requirements of: Mil-PRF BS2X34 A+B
Desothane HS Polyurethane Topcoat Semi Gloss TECHNICAL DATA SHEET Product Description is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components
CA8310B (Activator) CA8360 meets the performance requirements of: Mil-PRF FS BS2X34B
Desothane HS Polyurethane Topcoat Near Matt TECHNICAL DATA SHEET Product Description is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components
technical data Super Koropon fluid resistant interior primers C lick here to view Application Guide
C lick here to view Application Guide technical data Super Koropon fluid resistant interior primers Super Koropon fluid resistant interior primers Description conventional solids, chemically cured, lead
PR-1770A is a manganese dioxide cured sealant based on Permapol P-5 liquid polymers, a
PR1770 PR1770 High Strength Fuel Tank Sealant PR-1770 is a two-part, high strength / temperature resistant, brushing sealant for use over a temperature range of -55 C to +180 C, with outstanding resistance
10P20-14 High Solids Low IR Primer
Technical Data Sheet Product Group Epoxy Primer Characteristics Product Information - A high solids primer for aircraft exteriors meeting the low infrared reflectance requirements of the referenced specification.
58 Series Polyurethane topcoat
Product Group Polyurethane topcoat Characteristics Product Information - This two component high solids polyurethane finish is formulated for application to military aircraft, and is designed to provide
58 Series Polyurethane Topcoat
Product Group Polyurethane topcoat Characteristics - This two component high solids polyurethane finish is formulated for Product application to military aircraft, and is designed to provide maximum Information
Alumigrip 10P8-11 VOC Compliant Epoxy Primer
Technical Data Sheet Product Group Epoxy primer Characteristics - This two component, VOC compliant epoxy primer will provide a very Product smooth finish optimizing the appearance of the subsequent topcoat.
Aerodur HS Primer 37092
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Epoxy Primers Characteristics Product Information is a 2 component amine cured epoxy primer with improved adhesion properties for interior
Glosss. AkzoNobel Aerospace Coatings. Product Group. Alumigrip Base Coat on. base. Characteristics. Coat clear. coat system.
Base Coat Product Group Characteristics Components Product Information Base Curing Solution Activator Options High Solids Polyurethane Topcoat - Base Coat is a 3-component, high solids, durable, polyurethane
Integral Fuel Tank Coating
Technical Data Sheet Product Group Fuel tank coating Characteristics Product Information - A two-component coating developed as a secondary fuel vapor barrier coating for integral fuel tanks. May be applied
Alumigrip 4400 Base Coat Solid and Effect Colors
Technical Data Sheet Product Group High Solids Polyurethane Topcoat Characteristics - Alumigrip Base Coat is a 3-component, high solids, durable, Product polyurethane base coat, formulated to exceed the
of the relevant primer. - Apply
Product Group Polyurethane topcoat Characteristics Product Information 4200 is a 3-component high solid durable polyurethane topcoat that provides premium gloss and distinctness of image (DOI) designed
Alumigrip Technical Data Sheet. Polyurethane Topcoat. Product Group. Characteristics
Technical Data Sheet Product Group Polyurethane Topcoat Characteristics Product Information is a 3-component high solid durable polyurethane topcoat that provides premium gloss and distinctness of image
10P2-3 Anti-static Conductive Flat Black Epoxy Coating
Technical Data Sheet Product Group Conductive epoxy coating Characteristics Product Information This epoxy coating is designed to produce an anti-static conductive film on fiberglass components. It can
Aviox CF Primer 37124
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Epoxy Primers Characteristics Product Information is a 2-component amine cured epoxy primer for exterior use. - Developed as a refresh primer,
Aerowave Technical Data Sheet. Product Group. Epoxy topcoats. Characteristics
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Epoxy topcoats Characteristics Product Information is a water-based, 2-component, amine cured epoxy finish. - Water based technology - Compatible
Aerodur CF Primer 37047
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Polyurethane Primers Characteristics Product Information is a 3-component chromate free isocyanate cured modified polyurethane primer for
1.4 kg/l (11.4 lb/us gal) Maximum 295 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) 50 to 63 μm (2.0 to 2.
DESCRIPTION One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer. PRINCIPAL CHARACTERISTICS Heat-resistant silicone acrylic topcoat
Aerodur HS 2118 Chrome Free Primer
AkzoNobel Aerospace Coatings Aerodur HS 2118 Technical Data Sheet Product Group Corrosion inhibiting epoxy primer. Characteristics Product Information A high solid, polyurethane compatible, hydraulic fluid
Aerodur Barrier Primer 37045
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Epoxy Primers Characteristics Product Information is a chromate free 3-component isocyanate cured epoxy primer for composites and plastics.
One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer
DESCRIPTION One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer PRINCIPAL CHARACTERISTICS Heat-resistant silicone acrylic topcoat
Carboxane 950 Metallic
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Fluorourethane Premium, ultra-durable ambient cured finish meeting performance requirements. 950
PPG HI-TEMP 1000 V (AMERCOAT 873) PRODUCT DATA SHEET December 10, 2014 (Revision of June 30, 2014) DESCRIPTION
DESCRIPTION One-component, heat-resistant silicone topcoat for use in an elevated temperature coating system PRINCIPAL CHARACTERISTICS Heat-resistant topcoat with highly engineered silicone resin; able
1.4 kg/l (11.4 lb/us gal) Maximum 272 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) To 650 C (1200 F) To 538 C (1000 F)
DESCRIPTION One component heat resistant silicone topcoat for use in an elevated temperature coating system, primarily for application over PPG HI-TEMP 1027 primer PRINCIPAL CHARACTERISTICS Heat resistant
24T3 Series Abrasion Resistant Fast Dry Polyurethane Coating
Technical Data Sheet Product Group Abrasion resistant coating Characteristics Product Information This two-component, fluoropolymers filled polyurethane coating is inherently light stable with excellent
4002A21M Aluminum Lipskin Coating
Technical Data Sheet Product Group High heat coating Characteristics Product Information This specialty coating is designed for use on the leading edges of aluminum alloy nose cowl inlets. It is formulated
DIMETCOTE 9 / SIGMAZINC 9
DESCRIPTION Two-component, moisture-curing zinc (ethyl) silicate coating PRINCIPAL CHARACTERISTICS Anticorrosive primer for structural steel High zinc content resulting in excellent corrosion protection
Polyurethane Topcoats
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information is a 3-component durable high gloss polyurethane clear-coat for application on
Application. Fuselage Fuselage Fuselage. Decoration Decoration
Product Group Polyurethane Topcoats Characteristics Product Information is a 3 component durable high gloss finish for exterior use. - Extended durability / UV resistance - High solids - Resistance to
PPG HI-TEMP 1000 VS. PRODUCT DATA SHEET December 10, 2014 (Revision of June 30, 2014) DESCRIPTION
DESCRIPTION One-component, heat-resistant silicone topcoat for use in an elevated temperature coating system, primarily for application over PPG HI-TEMP 1027 primer PRINCIPAL CHARACTERISTICS Heat-resistant
Polyurethane Topcoats. Base material
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information is a 3-component basecoat for use in the base coat clear coat decoration system
Measured in accordance with ASTM D 2697.
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Service Temperature Solvent Based Inorganic Zinc Ultra-low VOC member of the Carbozinc family with extraordinary corrosion
Aerodur Clearcoat UVR
AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information is a universal 3-component, UV Resistant, high gloss polyurethane topcoat for application
Application. Fuselage Fuselage Fuselage. Decoration Decoration
Product Group Polyurethane Topcoats Characteristics Product Information is a 3 component durable high gloss finish for exterior use. - Extended durability / UV resistance - High solids - Resistance to
Solventless two-component crosslinked epoxy
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Solventless two-component crosslinked epoxy Solventless, clear, epoxy lining that can be applied
SIGMAZINC 158. PRODUCT DATA SHEET January 7, 2015 (Revision of December 15, 2014) DESCRIPTION
DESCRIPTION Two-component, moisture-curing zinc (ethyl) silicate primer PRINCIPAL CHARACTERISTICS Certificate for ASTM A-490 class 'B' for slip coefficient Complies with the compositional requirements
Eclipse. Technical Data Sheet. Product Group. Polyurethane topcoat
Technical Data Sheet Product Group Polyurethane topcoat Characteristics Product Information A chemically cured, low VOC topcoat designed to provide premium gloss and distinctness of image (DOI). This coating
Polyurethane topcoats
AkzoNobel Aerospace Coatings Aerowave 5001 Technical Data Sheet Product Group Polyurethane topcoats Characteristics Product Information Aerowave 5001 is a water-based, 3-component, isocyanate cured polyurethane
Measured in accordance with ASTM D 2697.
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Service Temperature Solvent Based Inorganic Zinc Ultra-low VOC member of the Carbozinc family with extraordinary corrosion
Solventless, two-component, cross-linked epoxy. Epoxies lose gloss, discolour and eventually chalk in sunlight exposure.
SELECTION & SPECIFICATION DATA Generic Type Description Features Colour Finish Primer Solventless, two-component, cross-linked epoxy. is a solventless epoxy lining for a variety of cargos including water,
One component, heat-resistant, universal silicone topcoat for use in elevated temperature systems. Replaces HI-TEMP 1000 V / VS / VHA
DESCRIPTION One component, heat-resistant, universal silicone topcoat for use in elevated temperature systems. Replaces HI-TEMP 1000 V / VS / VHA PRINCIPAL CHARACTERISTICS Heat-resistant topcoat with highly
Hardener: at least 24 months when stored cool and dry
DESCRIPTION Two-component, high-build polyamide cured zinc phosphate epoxy primer/coating PRINCIPAL CHARACTERISTICS Good anticorrosive properties under atmospheric conditions Forms durable coating systems
Understanding the Basics of Electrocoat. Kelly Moore Development Chemist
Understanding the Basics of Electrocoat Kelly Moore Development Chemist Overview Why and When to Use Electrocoat How Does Electrocoat Work? Selecting the Right Electrocoat Technology The Future of Electrocoat
Aviox Advanced Mica Series
Product Group Polyurethane topcoats Characteristics Product Information Micas are fast becoming a favorite in creating a unique appearance on aircraft liveries. This repairable high solid formulation is
BR 252 Water Based Bonding Primer
TECHNICAL DATA SHEET AEROSPACE MATERIALS BR 252 Water Based Bonding Primer DESCRIPTION BR 252 corrosion inhibiting primer is a non chromated, one part, modified epoxy bonding primer. It is designed to
Eclipse ECL-G-2 Clear High Solids Polyurethane Topcoat
Technical Data Sheet Product Group Polyurethane topcoat Characteristics Product Information ECL-G-2 is a high solids, long life clear coat formulated for use with Eclipse base coat and special effect colors
3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009
3 Scotch-Weld TM Technical Data December, 2009 Product Description 3M Scotch-Weld is a gray, two-part, high strength adhesive that chemically cures at room temperature. It has good adhesion to a variety
64C1-2-A High Temperature Resistant Insulative Coating
Product Group Characteristics Product Information High temperature coating is formulated for use as a high temperature insulation coating for environments with continuous exposure to temperatures up to
Hardener: at least 24 months when stored cool and dry
DESCRIPTION Two-component, engineered siloxane coating PRINCIPAL CHARACTERISTICS Unique, high gloss, engineered siloxane Virtually HAPs free, ultra-low VOC High durability in challenging environments Tough
max g/l (approx. 1.9 lb/gal) (aluminum) 31.2 m²/l for 25 µm (1251 ft²/us gal for 1.0 mils)
DESCRIPTION Two-component, engineered polysiloxane clearcoat PRINCIPAL CHARACTERISTICS Universal clear finish compatible with primed steel, clean metals and concrete High durability in challenging environments
Refer to Substrates & Surface Preparation.
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Aliphatic Acrylic Polyurethane Thin film, high gloss finish with exceptional weathering performance
Refer to Substrates & Surface Preparation.
SELECTION & SPECIFICATION DATA Generic Type Description Features Aliphatic Acrylic Polyurethane High gloss finish with exceptional weathering performance characteristics. Used extensively in virtually
Color Clear Black Black Clear Black. Viscosity seconds seconds Water Thin (DIN Cup) (Ford Cup) Water Thin 50 MPa*s
3 Cleaner/Primer 3M Cleaner C596 3M Fritted Glass Primer P590 3M Plastic Primer P591 3M Metal Primer P592 3M Teak & Glass Primer P595 Technical Data April, 2009 Product Description 3M Cleaner C596 and
Heresite P-413 TECHNICAL DATA SHEET. P-413 Typical Properties 1 mil DFT) Our 50 years of coating history speaks for itself.
Heresite P-413 Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became
3M Plastic Primer P591. Color Clear Black Black Clear Black Clear. (Ford Cup) Solids (%) VOC (g/l)
Cleaner/ 3M Cleaner C596 3M Fritted P590 3M Plastic P591 3M Metal P592 3M Teak & P595 3M Teak & P597, Clear Technical Data August, 2010 Product Description 3M Cleaner C596 and 3M s P590, P591, P592, P595
AMERLOCK 2 AL. PRODUCT DATA SHEET September 12, 2018 (Revision of May 2, 2018) DESCRIPTION. Fast Dry Aluminum Epoxy Mastic Coating
DESCRIPTION Fast Dry Aluminum Epoxy Mastic Coating PRINCIPAL CHARACTERISTICS Fast drying properties Good drying properties even at low temperatures Low VOC High performance coating for new or old steel
AMERSHIELD VOC. PRODUCT DATA SHEET April 20, 2015 DESCRIPTION. Low VOC Polyester Acrylic Polyurethane PRINCIPAL CHARACTERISTICS
DESCRIPTION Low VOC Polyester Acrylic Polyurethane PRINCIPAL CHARACTERISTICS Unique, high-solids, high build coating Outstanding weather resistance with excellent color and gloss retention Tough, flexible
Adhesion Promoter/Primer 3M Adhesion Promoter AP596
Adhesion Promoter/ 3M Adhesion Promoter AP596 3M All Purpose P591 3M Metal P592 Technical Data October 2017 Product Description 3M Adhesion Promoter AP596 and 3M s P591, P592, and are low viscosity adhesion
COMMERCIAL ITEM DESCRIPTION ELECTROCOATING PRIMER
[INCH-POUND] March 1, 2010 SUPERSEDING A-A-52474A December 4, 1996 COMMERCIAL ITEM DESCRIPTION ELECTROCOATING PRIMER The General Services Administration has authorized the use of this commercial item description
3 Scotch-Weld TM. Structural Adhesive Primer EC Technical Data August, 2002
3 Scotch-Weld TM Technical Data August, 2002 Introduction 3M Scotch-Weld is a sprayable corrosion inhibiting adhesive primer. It provides a high degree of protection against corrosive environments both
SIGMALINE PRODUCT DATA SHEET January 21, 2015 DESCRIPTION. Two-component, solvent-free, amine-cured phenolic epoxy coating
DESCRIPTION Two-component, solvent-free, amine-cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat system direct to metal for pipe externals Excellent resistance to cathodic protection Excellent
Extreme Sealing Tape
Extreme Sealing Tape Technical Data September, 2014 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.
NAVSEA REVIEWED ASTM F-718. Tenacious One Step Epoxy Flooring
ASTM F-718 International Diverse Flooring Tenacious One Step Epoxy Flooring MIL-PRF-24613 If this product is to be applied as part of a coating system, all components of the system must be as listed on
DPHS521 FL301. Low VOC Primer
Product Information Bulletin Effective 1/99 Low VOC Primer DPHS52 DPHS52 is a 3.5 VOC epoxy primer or primer surfacer designed specifically for use in fleet refinishing operations. The product is lead
Application Guidelines for PPC Coatings Flooring
Application Guidelines for PPC Coatings Flooring PPC Coatings Flooring System General Objective The objective of this specification is to describe the material and workmanship necessary to achieve desired
LV360 Primer EP 2.1 FOR PROFESSIONAL USE ONLY
Description Autocoat BT LV360 EP 2.1 is a two-component high solids corrosion inhibitive epoxy primer. LV360 Epoxy 2.1 is a low VOC, high solids, HAPs-Free epoxy primer that can be applied as a wet on
Rust-Oleum Industrial Brands Specification
Rust-Oleum Industrial Brands Specification Coating Specification for Rust-Oleum Virtual Solutions Coating Solution 2 A solvent based coating system High Performance 9100/9800 System DTM Epoxy Mastic/DTM
3M Scotchkote Liquid Epoxy Coating 323+
Data Sheet August 2017 Product Description 3M Scotchkote Liquid Epoxy Coating 323+ is a two-part system designed to help protect steel pipe and other metal surfaces from the harsh effects of corrosion.
Sanitile 945 SL PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. 100% solids epoxy
SELECTION & SPECIFICATION DATA Generic Type Description Features 100% solids epoxy Sanitile 945 SL is a 100% solids, high performance, epoxy coating designed for concrete. Sanitile 945 SL is a selfleveling
PROCESS SPECIFICATION- SURFACE FINISH
1.0 SCOPE This specification establishes the priming, painting and topcoat color requirements for components in accordance with the customer contract specifications. This procedure shall be used for aluminum
Custom Resin Packaging Solutions. Where Smart Solutions Take Flight
Custom Resin Packaging Solutions Where Smart Solutions Take Flight Get on with running your business not managing your chemicals Think of us as your own materials department. We can provide inventory control,
Metaflex SP 1050 Pretreatment
Technical Data Sheet Product Group Surface preparation Characteristics Product Information Metaflex SP1050 Pretreatment is a water based chrome-free surface pretreatment that gives superior adhesion, improved