Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
|
|
- Sheena Lewis
- 6 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Institut für Materialprüfung und Werkstofftechnik Dr. Neubert GmbH Freiberger Straße 1, Clausthal-Zellerfeld Tests in the fields: corrosion tests, metallographic tests and mechanical-technological tests at metallic materials and parts Abbreviations used: see last page 1 Corrosion tests ISO ISO DIN EN ISO DIN EN ISO DIN EN ISO Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/6
2 DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO Amendment DIN EN ISO 196 DIN EN ISO DIN DIN DIN DIN DIN DIN Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing Wrought copper and copper alloys - Detection of residual stress - Mercury(I)nitrate test Nickel-based alloys - Determination of resistance to intergranular corrosion Corrosion of metals - Corrosion testing - Part 1: General guidance Corrosion of metals - Corrosion testing - Corrosion characteristics under uniform corrosion attack Corrosion of metals - Corrosion testing - Corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress Corrosion of metals - Corrosion testing - Corrosion testing in liquids under laboratory conditions without mechanical stress Testing the resistance of unalloyed and low alloy steels to intergranular stress corrosion cracking by attack of nitrate medium - Welded and unwelded materials Testing of copper alloys - Stress corrosion cracking test in ammonia, testing of tubes, rods and profiles Period of validity: to Translation - 2/6
3 DIN DIN DIN DIN EN ISO ASTM A ASTM A ASTM B ASTM G1-03() 2003 ASTM G3-89(2010) 1989 ASTM G5-94()e ASTM G28-02(2008) 2002 ASTM G30-97(2009) 1997 ASTM G36-94(2006) 1994 ASTM G38-01(2007) 2001 ASTM G39-99() 1999 Testing of copper alloys - Stress corrosion cracking test using ammonia - Testing of components Corrosion of metal - Investigations of galvanic corrosion in electrolytic solutions Measurement of coating thickness - General working principles (withdrawn standard, replaced by DIN EN ISO 3882) Metallic and other inorganic coatings - Review of methods of measurement of thickness Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels Standard Test Method for Electrolytic Corrosion Testing (EC-Test) (withdrawn document) Standard Practice for Preparing, Cleaning, and Evaluating -Corrosion Test Specimens Standard Practice Applicable to Electrochemical Measurements in Corrosion Testing Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements Standard Test Method of Detecting Susceptibility to Intergranular Attack in Wrought, Nickel-Rich, Chromium-Bearing Alloys Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution Standard Practice for Making and Using C - Ring Stress Corrosion Test Specimens Standard Practice for Preparation and Use of Bent-Beam Stress Corrosion Test Specimens Period of validity: to Translation - 3/6
4 ASTM G46-94(2005) 2005 ASTM G48-11 ASTM G 49-85() 1985 ASTM G78-01(2012) 2001 ASTM G102-89(2010) 1989 ASTM G150-99(2010) 1999 NACE TM0169 / ASTM G31-12a 2012 NACE TM NACE TM0284- SEP SEP DN AV SCC Standard Practice for Examination and Evaluation of Pitting Corrosion Standard Test Method for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by the Use of Ferric Chloride Solution Standard Practice for Preparation and Use of Direct Tension Stress - Corrosion Test Specimens Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel- Base Stainless Alloys in Seawater and Other Chloride Containing Aqueous Environments Standard Practice of Calculation of Corrosion Rates and Related Information from Electrochemical Measurements Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels Standard Guide for Laboratory Immersion Corrosion Testing of Metals Standard Test Method: Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in H2S Environments Standard Test Method: Evaluation of Pipeline Steels for Resistance to Stepwise Cracking Testing of welded joints at plain and low-alloy steels for their resistance against stress corrosion cracking Test of the resistance of high-alloy, corrosion-proof materials against intercrystalline corrosion Stress corrosion cracking tests in aqueous and non-aqueous liquids using tensile tests, bending tests, C-ring samples or loop samples at temperatures up to 300 C under gas load up to 400 bar Period of validity: to Translation - 4/6
5 2 Metallographic tests DIN EN ISO DIN DIN SEP SEP ASTM E 3-11 ASTM E 45-11a ASTM E ASTM E ASTM E (2008) 2002 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Metallographic examination - Determination of the ferritic or austenitic grain size of steel and ferrous materials Metallographic examination - Microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions Microscopic test of stainless steels to non-metallic inclusions with images (withdrawn document) Microscopic test of free cutting steels for solid nonmetallic inclusions in metal by means of strip mosaics Standard Methods of Preparation of Metallographic Specimens Standard Practice for Determining the Inclusion Content of Steel - Microscopical Methods Standard Test Method for Determining Average Grain Size Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count Standard Test Methods for Characterizing Duplex Grain Sizes 3 Mechanical-technological tests DIN EN ISO DIN EN ISO Metallic materials - Vickers hardness test - Part 1: Test method Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (here: Scala C) Period of validity: to Translation - 5/6
6 DIN EN ISO DIN DIN DIN EN ISO BS BS DIN EN DIN EN ISO Metallic materials - Bend test Testing of Materials - Continuous Vibration Test, Definitions, Symbols, Procedure, Evaluation Testing of Metallic Materials Compression Test Metallic materials - Determination of plane-strain fracture toughness Fracture mechanics toughness test - Method for determination of KIc, critical CTOD and critical J values of metallic materials Fracture mechanics toughness test - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials Tensile testing - Part 1: Method of testing at ambient temperature (withdrawn standard, replaced by DIN EN ISO ) Metallic materials - Tensile testing - Part 1: Method of test at room temperature (here: Method B) abbreviations used: ASTM BS DN AV NACE SEP American Society for Testing and Materials British Standard In-house method by Institut für Materialprüfung und Werkstofftechnik Dr. Neubert GmbH National Association of Corrosion Engineers Iron-Steel-test sheets from the German Iron and Steel Institute Period of validity: to Translation - 6/6
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11325-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 23.01.2017 to 22.01.2022 Holder of certificate: INDUSTRIE-LABOR
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11278-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 12.05.2016 to 11.05.2021 Holder of certificate: Salzgitter
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18064-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 04.12. to 03.12.2022 Holder of certificate: Buderus
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19890-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.11.2016 to 14.04.2020 Holder of certificate: Aktien-Gesellschaft
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18053-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 02.08.2018 to 26.07.2022 Holder of certificate: F
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18511-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.01.2018 to 29.01.2023 Holder of certificate: TÜV
More informationProfessional Testing Services Pte Ltd Certificate No. : LA G 32 Kian Teck Road Singapore Issue No. : 19 TESTS/ PROPERTIES
Professional Testing Services Pte Ltd Certificate No. : LA-1995-0088-G 32 Kian Teck Road Singapore 628779 Issue No. : 19 FIELD OF TESTING : Mechanical Testing Date : 05 January 2017 Page : 1 of 7 A. METALS
More informationATI 2205 ATI Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Eden House Watling Street Industrial Estate Leadgate Consett County Durham DH8 6TA Contact: Mr R L Hannant Tel: +44 (0)1207 599260 Fax: +44
More informationAccurate Laboratory Services, Plot No. 71/1-B7, General Block, MIDC Bhosari, Bhosari-Pimpri Road, Pune, Maharashtra
Last Amended on 21.07.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Ferrous & Non and Alloys Brinell Hardness IS 1500: 2013 ISO 6506-1: 2014 ASTM E 10: 2014 Rockwell Hardness IS 1586 Part 1:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Hareness Circle Industrial Estate Aberdeen Scotland AB12 3LY Contact: Mrs D McAdam Tel: +44 (0)1224-890020 Fax: +44 (0)1224-890220 E-Mail:
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION Exova Canada Inc.
More informationSchedule. This laboratory has demonstrated its technical competence to operate in accordance with MS ISO/IEC 17025:2005 (ISO/IEC 17025:2005).
LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 11 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG 79200 ISKANDAR PUTERI, JOHOR MALAYSIA FIELD OF TESTING:
More informationCompany Profile. Metallurgical Consultancy and Services Sdn. Bhd. Contact Person : Dr. Lim Ching Liang, Director
Company Profile Metallurgical Consultancy and Services Sdn. Bhd. MS ISO/IEC 17025 TESTING SAMM No. 442 Contact Person : Dr. Lim Ching Liang, Director Contact Details: 20, Seksyen U5/17 (PS), Seksyen U5
More informationSchedule. Type of Test/ Properties Measured/ Range of Measurement
LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 9 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG 81550 GELANG PATAH, JOHOR MALAYSIA This laboratory accredited
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY HOUSTON REGAL ROW 1 9925 Regal Row Houston, TX 77040 Richard Green Phone: 281 848 0270 MECHANICAL Valid To: January 31, 2020 Certificate
More informationATI ATI 2205 Alloy (UNS S31803 and S32205) Duplex Stainless Steel. Technical Data Sheet
Alloy (UNS S31803 and S32205) Duplex Stainless Steel GENERAL PROPERTIES alloy (UNS S31803 and/or S32205) is a nitrogenenhanced duplex stainless steel alloy. The nitrogen serves to significantly improve
More informationATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Voorerf 18 4824 GN Breda Location Abbreviation/ location code Voorerf 18 4824 GN Breda Schutterstraat 27B 6191 RZ Beek Zekeringstraat
More informationATI 904L ATI 904L. Technical Data Sheet. Stainless Steel: Superaustenitic INTRODUCTION COMPOSITION CORROSION RESISTANCE (UNS N08904)
ATI 904L Stainless Steel: Superaustenitic (UNS N08904) INTRODUCTION ATI 904L alloy (UNS N08904) is an austenitic stainless steel designed for a middle to high level of corrosion resistance. The alloy contains
More informationLista standard utilizzati per l'esecuzione dei test RTM Breda
ASTM E415-08 ASTM E415-14 Chemical analysis of carbon steels ASTM E415-99a RCCM MC 1350 ASTM E1086-08 Chemical analysis of stainless steels ASTM E1086-14 Quantometric chemical analysis of laminated or
More informationOutokumpu 2507 UNS S32750
UNS S32750 North American Version Imperial Units Design Features Very high strength High resistance to pitting, crevice, and general corrosion Very high resistance to chloride stress corrosion cracking
More informationLaboratory Experiments in Corrosion Engineering II
Lecture - 40 Laboratory Experiments in Corrosion Engineering II Keywords: Polarization Experiments, Pitting Potentials, Microbial Corrosion. A. Electrochemical tests in a given environment Polarization
More informationHeat Treatment of Tubes for Condenser, Feedwater Heater, and Shell & Tube Heat Exchangers
Heat Treatment of Tubes for Condenser, Feedwater Heater, and Shell & Tube Heat Exchangers 1. SCOPE 1.1 The purpose of this document is to provide an overview of the different types of heat treatment processes
More informationSTAINLESS STEEL. General Information
General Information General Information GROUPS AND GRADES OF STAINLESS S In ISO 3506, reference is made to steel grades A1 to A5, C1 to C4 and F1, covering steels of the following groups: - Austenitic
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Locations where activities are performed under accreditation Location Abbreviation/ location code Element eda - Headfice Voorerf 18 4824 GN eda Netherlands Element Beek Schuttersstraat 27 B 6191 RZ Beek
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationA Study on the Corrosion Characteristics of Welded Stainless Steels Used in the Fabrication of Brine Circulating Pumps
A Study on the Corrosion Characteristics of Welded Stainless Steels Used in the Fabrication of Brine Circulating Pumps A. I. AlGobouri 1, O. A. Abuzeid 2, M. Abou Zour 3, Basel Alsayyed 4 1 Intertek, P.O.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationAnnex to the Accreditation Certificate D-PL
c GmbH Annex to the Accreditation Certificate D-PL-11086-01-00 according to DIN EN ISO/IEC 17025:2005 period ofvalidity: 05.08.2015 to 04.08.2020 Dateofissue: 05.08.2015 Certificate Holder: IFO - Institut
More informationSandvik SAF 2205 (Billets)
Datasheet updated 2013 11 28 14:13:21 (supersedes all previous editions) Sandvik SAF 2205 (Billets) Sandvik SAF 2205 is a duplex (austenitic ferritic) stainless steel characterized by: High resistance
More informationAL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735)
AL 29-4C Stainless Steel: Superferritic (UNS S44735) INTRODUCTION AL 29-4C alloy, is a superferritic stainless steel developed by ATI in the early 1980s specifically for power plant surface condenser tubing.
More informationPrevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17781 First edition 2017-07 Petroleum, petrochemical and natural gas industries Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels
More informationISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 1: Wrought stainless steel
INTERNATIONAL STANDARD ISO 5832-1 Fourth edition 2007-06-15 Implants for surgery Metallic materials Part 1: Wrought stainless steel Implants chirurgicaux Matériaux métalliques Partie 1: Acier inoxydable
More informationOn the Long-Term Stability of 6013-T6 Aluminium Alloy Sheet
Proceedings of the 9 th International Conference on Aluminium Alloys (2004) 986 Edited by J.F. Nie, A.J. Morton and B.C. Muddle Institute of Materials Engineering Australasia Ltd On the Long-Term Stability
More informationSANDVIK 3R60 TUBE AND PIPE, SEAMLESS
SANDVIK 3R60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R60 is an austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content. Sandvik 3R60 is also available in a variant for
More informationPRESSURFECT CNG TUBE AND PIPE, SEAMLESS
PRESSURFECT CNG TUBE AND PIPE, SEAMLESS DATASHEET Pressurfect CNG is a dual grade certified (ASTM 316/316L) austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content used for
More informationSANDVIK 3R65 TUBE AND PIPE, SEAMLESS
SANDVIK 3R65 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R65 is a molybdenum-alloyed austenitic stainless chromium-nickel steel with a low carbon content. STANDARDS ASTM: TP316L, TP316 UNS: S31603, S31600
More informationWHAT IS THE ACTUAL COST OF YOUR COMMERCIAL WATER HEATER? LOOKING BEYOND EFFICIENCY INCREASING ROI THROUGH WATER HEATER MATERIAL SELECTION
Engineered Water Heating Solutions WHAT IS THE ACTUAL COST OF YOUR COMMERCIAL WATER HEATER? LOOKING BEYOND EFFICIENCY INCREASING ROI THROUGH WATER HEATER MATERIAL SELECTION Water Heater Efficiency Water
More informationIdentification. Type Analysis
Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur
More informationSANDVIK 3RE60 TUBE AND PIPE, SEAMLESS
SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3RE60 is a duplex (austenitic-ferritic) stainless steel characterized by the following properties: High resistance to stress corrosion cracking (SCC)
More informationISO INTERNATIONAL STANDARD
- INTERNATIONAL STANDARD ISO 9327-1 First edition 1999-04-15 Steel forgings and rolled or forged bars for pressure purposes Technical delivery conditions Part 1: General requirements Pièces forgées et
More informationIndex. Key to Abbreviations Used in Index T = table D = definition F = figure [ ] = see this subject under this listing
STP610-EB/NOV. 1976 Index Key to Abbreviations Used in Index T = table D = definition F = figure [ ] = see this subject under this listing Activation energy, 157, 319 Aerospace alloys (steels), 250 Air
More informationSandvik SAF 2205 (Tube and pipe, seamless)
Datasheet updated 2012 10 14 10:38:02 (supersedes all previous editions) Sandvik SAF 2205 (Tube and pipe, seamless) Sandvik SAF 2205 is a duplex (austenitic ferritic) stainless steel characterized by:
More informationSANDVIK SPRINGFLEX SF SPRING WIRE WIRE
SANDVIK SPRINGFLEX SF SPRING WIRE WIRE DATASHEET Sandvik Springflex SF is a duplex (austenitic-ferritic) stainless steel especially designed for spring applications with extremely high fatigue requirements.
More informationThe ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
More informationSANDVIK SAF 2304 TUBE AND PIPE, SEAMLESS
SANDVIK SAF 2304 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik SAF 2304 is a lean duplex (austenitic-ferritic) stainless steel characterized by the following properties: Very good resistance to stress corrosion
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationMetallurgical Properties Influencing Corrosion
Lecture 38 Metallurgical Properties Influencing Corrosion Keywords: Metallurgical Properties, Intergranular Corrosion, Hydrogen Embrittlement, Iron Pillar Metallurgical properties and structure influence
More informationFactors Influencing Materials Selection in Condensing Economizers
Materials Selection for Condensing Economizers Gary M. Carinci, Ph.D. Outokumpu Stainless Outokumpu Stainless Factors Influencing Materials Selection in Condensing Economizers Temperature ph control Sulfur
More informationSANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS
SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R12 is an austenitic stainless chromium-nickel steel with a low carbon content used for medical and dental instruments.
More informationATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601)
Nickel-base Alloy (UNS N06601) INTRODUCTION alloy (UNS Designation N06601) is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to ATI 600 alloy (UNS
More informationAppendix I: Other Standards on Metallography/ Materialography
686 METALLOGRAPHIC AND MATERIALOGRAPHIC SPECIMEN Vander Voort, G. V., Metallography Principles and Practice, ASM International, Materials Park, Ohio, USA, 1999. Waschull, H., Präparative Metallographie,
More informationHASTELLOY G-35 alloy. Nominal Composition. Weight % O 5
HASTELLOY G-35 alloy Principal Features A nickel alloy with exceptional resistance to wet process phosphoric acid HASTELLOY G-35 alloy (UNS N06035) was designed to resist wet process phosphoric acid (P
More informationATI 201 HP /ATI 201L HP
Stainless Steel: Austenitic (UNS S20100 and S20103) GENERAL PROPERTIES and L austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, which are similar to the 300 series of Cr-Ni
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACUREN INC. 2190 Speers Road Oakville, Ontario, Canada L6L 2X8 Erhan Ulvan Email: eulvan@acuren.com Phone: 905-673-9899 MECHANICAL Valid To: December 31, 2019
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-21039-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 27.02.2018 to 28.08.2019 Holder of certificate: Framatome
More informationMATERIALS AND WELDING FOR STAINLESS STEELS
Guide for Materials and Welding for Stainless Steels GUIDE FOR MATERIALS AND WELDING FOR STAINLESS STEELS APRIL 2019 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York
More informationTesting and Analysis Laboratory
Testing and Analysis Laboratory Mechanical Chemical Metallographic Corrosion The Company Established in Quinzano di Sumirago (Varese), the company was founded in 2013; dynamism and reliability make it
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom Contact:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 1 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com MECHANICAL
More informationATI 332Mo. ATI 332Mo. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES COMPOSITION PHYSICAL PROPERTIES (UNS S35125)
ATI 332Mo Stainless Steel: Austenitic (UNS S35125) GENERAL PROPERTIES ATI s ATI 332Mo alloy is an austenitic stainless steel intended primarily as an economical material for automotive flexible connectors.
More informationSandvik 316 (Plate and sheet)
Datasheet updated 2014 01 29 12:21:53 (supersedes all previous editions) Sandvik 316 (Plate and sheet) Sandvik 316 is a molybdenum alloyed austenitic chromium nickel steel. STANDARDS ASTM 316 UNS S31600
More informationHastelloy C-2000 (UNS N06200)
Hastelloy C-2000 (UNS N06200) Hastelloy C-2000 is a versatile alloy that provides high resistance to variety of chemicals including sulfuric acid, hydrochloric acid and other strong acidic media. It offers
More informationCrack Initiation and Crack Propagation of Pre-corroded Ni-16Cr Alloy in 4.5%NaCl Aqueous Solution
IOSR Journal of Engineering (IOSRJEN) e-issn: 2250-3021, p-issn: 2278-8719 Vol. 3, Issue 8 (August. 2013), V2 PP 11-15 Crack Initiation and Crack Propagation of Pre-corroded Ni-16Cr Alloy in 4.5%NaCl Aqueous
More informationNominal Composition. Weight %
HASTELLOY HYBRID-BC1 Principal Features High Resistance to Hydrochloric Acid, Sulfuric Acid, Pitting, and Crevice Corrosion HASTELLOY HYBRID-BC1 (UNS N10362) alloy possesses much higher resistance to hydrochloric
More informationHASTELLOY G-30 alloy Principal Features
HASTELLOY G-30 alloy Principal Features 30 years of proven performance in wet process phosphoric acid HASTELLOY G-30 alloy (UNS # N06030) is a nickel-chromium-iron material highly resistant to wet process
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3651-1 Second edition 1998-05-15 Determination of resistance to intergranular corrosion of stainless steels Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels
More informationBrochure & Price List. January 2019
Brochure & Price List January 2019 60 BLUE HEN DRIVE, NEWARK, DE 19713 TELEPHONE: 302-454-8200 FAX: 302-454-8204 ON THE WEB @ http://www.corrosionlab.com Email: brad@corrosionlab.com Corrosion Testing
More information430 ULTRA FORM 430 STAINLESS STEEL
43 ULTRA FORM 43 STAINLESS STEEL Appliances Food Equipment General Construction Interior Architectural Trim Restaurant Equipment AK STEEL 43 ULTRA FORM STAINLESS STEEL was developed as a more formable
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17945 First edition 2015-04-15 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
More informationSANDVIK SPRINGFLEX STRIP STEEL
SANDVIK SPRINGFLEX STRIP STEEL DATASHEET Sandvik Springflex is a duplex (austenitic-ferritic) stainless spring steel with very good spring properties and excellent corrosion resistance. Sandvik Springflex
More informationATI 321 /ATI 347 /ATI 348
ATI 321 /ATI 347 /ATI 348 Stainless Steel: Austenitic (UNS S32100, S34700, S34800) GENERAL INFORMATION ATI 321 (UNS S32100), ATI 347 (UNS S34700), and ATI 348 (UNS S34800) alloys are stabilized stainless
More informationSensitization & Corrosion Behaviour of Austenitic Stainless Steel 304 & 316
Sensitization & Corrosion Behaviour of Austenitic Stainless Steel 304 & 316 Manish Kumar Verma Mechanical, Columbia Institute of Engineering & Technology, Raipur (India) ABSTRACT Austenitic Stainless steels
More informationSANDVIK 6R44 TUBE AND PIPE, SEAMLESS
SANDVIK 6R44 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 6R44 is an austenitic, niobium-stabilized stainless chromium-nickel steel for use at temperatures up to 850 C (1560 F). STANDARDS ASTM: TP347, TP347H
More informationSeamless tube. Sandvik SAF S-1874-ENG May 2000 Cancels all previous editions
Seamless tube Sandvik S-1874-ENG May 2 Cancels all previous editions Sandvik is a duplex stainless steel (austenitic-ferritic). It is characterised by: high resistance to stress corrosion cracking in chloride-bearing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4520 Willow Parkway Cleveland, OH 44125 Alexander Manuk Phone: 216 641 3290 CHEMICAL Valid To: May 31, 2019 Certificate Number: 0161.01 In recognition of the
More informationSTAINLESS STEEL DATASHEETS
STAINLESS STEEL DATASHEETS Alloys: 304 304L 310 316 316L 316LN 316Ti 316LVM 6Mo 21-6-9 22-13-5 904L Alloys 304 / 304L Alloys 304 / 304L (UNS S30400 / S30403) Alloys 304 (S30400) and 304L (S30403) stainless
More informationCorrosion Properties of Enhanced Duplex Steel UNS S32304
A CORROSION MANAGEMENT AND APPLICATIONS ENGINEERING MAGAZINE FROM OUTOKUMPU Corrosion Properties of Enhanced Duplex Steel UNS S3234 2/215 2/215 2 Corrosion Properties of Enhanced Duplex Steel UNS S3234
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationSTRESS CORROSION CRACKING OF STAINLESS STEELS IN HIGH PRESSURE ALKALINE ELECTROLYSERS
STRESS CORROSION CRACKING OF STAINLESS STEELS IN HIGH PRESSURE ALKALINE ELECTROLYSERS Haraldsen, K. 1 and Leth-Olsen, H. 1 1 Corporate Research Centre, Norsk Hydro ASA, P.O.Box 2560, 3908 Porsgrunn, Norway
More informationCross-index of Related Corrosion Standards (Only titles and designations)
Cross-index of Related Corrosion Standards (Only titles and designations) DESIGNATION NACE TITLE PROD # NACE TM0169/ASTM G31 Standard Guide for Laboratory Immersion Corrosion Testing of Metals 21200 NACE/ASTM
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS corrosion resistant alloys ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationATI 20 ATI 20. Technical Data Sheet. Stainless Steel: Superaustenitic INTRODUCTION TYPICAL COMPOSITION (UNS N08020)
ATI 20 Stainless Steel: Superaustenitic (UNS N08020) INTRODUCTION ATI 20 alloy (UNS N08020) has been available for many years and has found applications in many environments, such as in chlorides and in
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Locations where activities are performed under accreditation Location bbreviation/ location code Element Materials Technology
More informationGlossary of Steel Terms
Glossary of Steel Terms Steel Terms Explained. Below we list some of the most common steel terms and explain what they mean. AISI Alloy Alloy Steel Annealing ASTM Austenitic Bar Brinell (HB) Bright Drawn
More informationHASTELLOY C-2000 alloy
HASTELLOY C-2000 alloy Principal Features A copper-bearing Ni-Cr-Mo material with exceptional resistance to sulfuric acid HASTELLOY C-2000 alloy (UNS N06200) is unique among the versatile nickel-chromium-molybdenum
More informationCOMPARISON OF TWO TESTING METHODS FOR DETERMINATION OF RESISTANCE OF GRADE X65 STEEL TO HYDROGEN INDUCED CRACKING
COMPARISON OF TWO TESTING METHODS FOR DETERMINATION OF RESISTANCE OF GRADE X65 STEEL TO HYDROGEN INDUCED CRACKING Petr JONŠTA a, Karel MATOCHA b a VSB-TU Ostrava, Faculty of Metallurgy and Materials Engineering,
More informationSANDVIK SPRINGFLEX STRIP STEEL
SANDVIK SPRINGFLEX STRIP STEEL DATASHEET Sandvik Springflex is a duplex (austenitic-ferritic) stainless spring steel with very good spring properties and excellent corrosion resistance. Sandvik Springflex
More informationCorrosion. Cause of Corrosion: Electrochemical Mechanism of Corrosion (Rusting of Iron)
Corrosion Any process of deterioration (or destruction) and consequent loss of a solid metallic material, through an unwanted (or unintentional) chemical or electrochemical attack by its environment, starting
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com CHEMICAL
More informationChemical characteristics The chemical composition is shown in Table 1. Outokumpu EN ASTM
for Bar Applications has a unique combination of characteristics (good corrosion properties, high strength and good machinability), which together with its relative price stability, makes it the material
More information