HST2 Expansion anchor Everyday standard expansion anchor for cracked concrete
|
|
- Jeffrey Herbert Watson
- 6 years ago
- Views:
Transcription
1 HST2 Expansion anchor Everyday standard expansion anchor for cracked Anchor version HST2 HST2-R (M8-M16) Benefits - Optimized expansion cone and wedge design combined with special steel and coatings. - Suitable for non-cracked and cracked - Product and length identification mark facilitates quality control and inspection HST2-BW HST2-R-BW (M8-M16) Base material Load conditions Concrete (non-cracked) Concrete (cracked) Static/ quasi-static Fire resistance Installation conditions Other information Hammer drilled holes Diamond drilled holes Hollow drillbit drilling European Technical Assessment CE conformity PROFIS Anchor design Software FM approved Approvals / certificates Description Authority / Laboratory No. / date of issue European technical assessment a) DIBt, Berlin ETA-15/0435 / Fire test report DIBt, Berlin ETA-15/0435 / a) All data given in this section according to ETA-15/0435, issue Nov-17
2 Static and quasi-static loading (for a single anchor) All data in this section applies to: - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Minimum base material thickness - Concrete C 20/25, fck,cube = 25 N/mm² Effective anchorage depth for static Eff. Anchorage depth hef [mm] Mean ultimate resistance Non-cracked NRu,m VRu,m 11,9 21,2 26,6 46,5 HST2-R/HST2-R-BW 11,9 21,2 26,6 46,5 12,0 22,7 33,0 58,1 HST2-R/HST2-R-BW 16,5 26,6 38,5 66,8 Cracked NRu,m VRu,m 6,6 11,9 15,9 26,6 HST2-R/HST2-R-BW 6,6 11,9 15,9 33,2 12,0 22,7 33,0 58,1 HST2-R/HST2-R-BW 16,5 26,6 38,5 66,8 Characteristic resistance Non-cracked NRk VRk 9,0 16,0 20,0 35,0 HST2-R/HST2-R-BW 9,0 16,0 20,0 35,0 11,4 21,6 31,4 55,3 HST2-R/HST2-R-BW 15,7 25,3 36,7 63,6 Cracked NRk VRk 5,0 9,0 12,0 20,0 HST2-R/HST2-R-BW 5,0 9,0 12,0 25,0 11,4 21,6 31,4 55,3 HST2-R/HST2-R-BW 15,7 25,3 36,7 63,6 Nov-17 2
3 Design resistance Non-cracked NRd VRd 6,0 10,7 13,3 23,3 HST2-R/HST2-R-BW 6,0 10,7 13,3 23,3 9,1 17,3 25,1 44,2 HST2-R/HST2-R-BW 12,6 20,2 29,4 50,9 Cracked NRd VRd 3,3 6,0 8,0 13,3 HST2-R/HST2-R-BW 3,3 6,0 8,0 16,7 9,1 17,3 25,1 44,2 HST2-R/HST2-R-BW 12,6 20,2 29,4 44,6 Recommended loads a) Non-cracked Nrec Vrec 4,3 7,6 9,5 16,7 HST2-R/HST2-R-BW 4,3 7,6 9,5 16,7 6,5 12,3 17,9 31,6 HST2-R/HST2-R-BW 9,0 14,5 21,0 35,7 Cracked Nrec Vrec 2,4 4,3 5,7 9,5 HST2-R/HST2-R-BW 2,4 4,3 5,7 11,9 6,5 12,3 17,9 31,6 HST2-R/HST2-R-BW 9,0 14,5 21,0 31,8 a) With overall partial safety factor for action = 1,4, The partial safety factors for action depend on the type of loading and shall be taken from national regulations, Fire resistance All data in this section applies to: - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Minimum base material thickness - Concrete C 20/25, fck,cube = 25 N/mm² - Hilti technical data for strength class C55/67 to C80/95: for a structural element that fullfills the requirements according to DIN EN the fire resistance of C20/25 could be assumed. - partial safety factor for resistance under fire exposure M,fi=1,0 (in absence of other national regulations) Effective anchorage depth for static Eff. Anchorage depth hef [mm] Nov-17
4 Characteristic resistance Fire Exposure R30 NRk,fi VRk,fi 0,9 2,3 3,0 5,0 HST2-R/HST2-R-BW 0,9 2,3 3,0 5,0 0,9 2,5 5,0 9,0 HST2-R/HST2-R-BW 0,9 2,5 5,0 9,0 Fire Exposure R120 NRk,fi VRk,fi 0,5 0,7 1,0 2,0 HST2-R/HST2-R-BW 0,5 0,7 1,0 2,0 0,5 0,7 1,0 2,0 HST2-R/HST2-R-BW 0,5 0,7 1,0 2,0 Design resistance Fire Exposure R30 NRd,fi VRd,fi 0,9 2,3 3,0 5,0 HST2-R/HST2-R-BW 0,9 2,3 3,0 5,0 0,9 2,5 5,0 9,0 HST2-R/HST2-R-BW 0,9 2,5 5,0 9,0 Fire Exposure R120 NRd,fi VRd,fi 0,5 0,7 1,0 2,0 HST2-R/HST2-R-BW 0,5 0,7 1,0 2,0 0,5 0,7 1,0 2,0 HST2-R/HST2-R-BW 0,5 0,7 1,0 2,0 Materials Mechanical properties Nominal tensile strength fuk,thread Yield strength fyk,thread [N/mm²] HST2-R/HST2-R-BW [N/mm²] HST2-R/HST2-R-BW Stressed cross-section As [mm²] 36,6 58,0 84,3 157 Moment of resistance W [mm³] 31,2 62, Char, bending resistance M 0 Rk,s [Nm] HST2-R/HST2-R-BW Nov-17 4
5 Material quality Part Bolt HST2-R/HST2-R-BW Material Carbon steel, galvanized Stainless steel Anchor dimensions Minimum thickness of fixture tfix,min [mm] Maximum thickness of fixture tfix,max [mm] Shaft diameter at the cone dr [mm] 5,5 7,2 8,5 11,6 Maximum length of anchor l1,max [mm] Minimum length of anchor l1,min [mm] Length of expansion sleeve l2 [mm] 14,8 18,2 22,7 24,3 Setting information Setting details Nominal diameter of drill bit do [mm] Cutting diameter of drill bit dcut [mm] 8,45 10,45 12,50 16,50 Drill hole depth 1) h1,1 [mm] h1,2 [mm] Diameter of clearance hole in the fixture df [mm] Torque moment Tinst [Nm] Width across SW [mm] ) h1,1 valid for hammer drilled holes and h1,2 valid for diamond drilled holes. 5 Nov-17
6 Installation equipment Rotary hammer TE2 TE16 Diamond coring tool DD 30W, DD EC1 Hollow drill bit - - TE CD, TE YD Other tools hammer, torque wrench, blow ut pump Setting parameters Anchor Size M8 M10 M12 M16 Effective anchorage depth hef [mm] Minimum base material thickness hmin [mm] Minimum smin [mm] spacing in for c [mm] noncracked smin [mm] for c [mm] Minimum spacing in cracked smin [mm] for c [mm] smin [mm] for c [mm] Minimum cmin [mm] edge for s [mm] distance in cmin [mm] non-cracked for c [mm] Minimum cmin [mm] edge for s [mm] distance in cmin [mm] cracked for c [mm] Critical spacing for splitting failure and scr,sp [mm] cone failure scr,n [mm] Critical spacing for splitting failure and ccr,sp [mm] cone failure ccr,n [mm] For spacing (edge distance) smaller than critical spacing (critical edge distance) the design loads have to be reduced. Nov-17 6
7 Setting instructions *For detailed information on installation see instruction for use given with the package of the product Setting instruction Hammer drilling 1. Drill the hole 2. Clean the hole 3. Insert the anchor 4. Use a setting tool HS-SC 5. Checking 6. Attach the belonging washer Hollow Drill Bit, no cleaning required 1. Drill the hole with the Hollow drill bit 2. Insert the anchor 3. Use a setting tool HS-SC 4. Checking 5. Attach the belonging washer 7 Nov-17
8 Diamond coring 1. Core the hole 2. Flushing 3. Clean the hole 4. Insert the anchor 5. Use a setting tool HS-SC 6. Checking 7. Attach the belonging washer Nov-17 8
HUS-HR / HUS-CR Screw anchor
HUS-HR / HUS-CR Screw anchor Anchor version Benefits HUS-HR (M8-M14) HUS-CR (M8-M14) - High productivity- less drilling and fewer operations than with conventional anchors - ETA approval for cracked and
More informationHilti HIT-HY 200 A (R) mortar with HIT-V rods
Hilti HIT-HY 200 A (R) mortar with HIT-V rods Injection mortar system Hilti HIT- HY 200-A 500 ml foil pack (also available as 330 ml foil pack) Hilti HIT- HY 200-R 500 ml foil pack (also available as 330
More informationHilti HST3 Metal Expansion Anchor
Hilti Metal Expansion Anchor Product Information 2-4 Letter for Phase-in of 5-6 Technical Data (Anchor Fastening Technology Manual) 7-14 Test Reports as per BS5080 15-38 Country of Origin 39 Hilti Engineering
More informationHilti HIT-RE 500 V3 mortar with HIT-V rod
Hilti HIT-RE 500 V3 Injection mortar system Hilti HIT-RE 500 V3 330 ml, 500 ml and 1400 ml foil pack Static mixer HIT-V rod Benefits - SafeSet technology: Simplified method of borehole preparation leaving
More informationAnchor HSA Fastening. Technology Manual HSA. Stud anchor. Version /
Anchor HSA Fastening Stud anchor Technology Manual HSA Stud anchor Version 2015-09 09 / 2015 1 HSA Stud anchor Anchor version HSA Carbon steel with DIN 125 washe HSA-R Stainless steel A4 HSA-R2 Stainless
More informationAnchor Fastening Technology Manual. HIT-HY 170 mortar with rebar (as anchor) Hilti HIT-HY 170 mortar with rebar (as anchor) Version
Anchor Fastening Technology Manual Hilti HIT-HY 170 mortar with HIT-HY 170 mortar with rebar (as anchor) Version 2016-10 1 November 3, 2016 Hilti HIT-HY 170 mortar with Injection mortar system Benefits
More informationHST Carbon steel. HST-R Stainless steel HST-HCR High corrosion resistance steel. Fire resistance
Stud anchor Anchor version Carbon steel -R Stainless steel -HCR High corrosion resistance steel Benefits - suitable for non-cracked and cracked concrete C 20/25 to C 50/60 - highly reliable and safe anchor
More informationHKD Push-in anchor, Single anchor application
Push-in anchor, Anchor version Carbon steel with lip -S(R) Carbon steel, stainless steel with lip -E(R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved, tested and
More informationHVU with HAS/HAS-E rod adhesive anchor system
HVU with HAS/HAS-E rod HVU with HAS/HAS-E rod Mortar system Benefits Hilti HVU foil capsule HAS HAS-R HAS-HCR rod - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity - suitable
More informationEnglish translation prepared by CSTB - Original version in French language. Throughbolt PTB-ETA7-PRO
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment
More informationHUS3-H 8 / 10 / 14 Carbon steel concrete screw with hexagonal head. HUS3-C 8 / 10 Carbon steel concrete screw with countersunk head
HUS3 Screw anchor Anchor version HUS3-H 8 / 10 / 14 Carbon steel concrete screw with hexagonal head HUS3-C 8 / 10 Carbon steel concrete screw with countersunk head HUS3-HF 10 / 14 Carbon steel concrete
More informationAnchor Fastening. Technology Manual HUS3. Screw Anchor HUS3-H 6/8/10/14 HUS3-C 6/8/10 HUS3-HF 8/10/14 HUS3-A 6 HUS3-I 6 HUS3-P 6 HUS3-PS 6 HUS3
Anchor Fastening Technology Manual HUS3 Screw Anchor HUS3-H 6/8/10/14 HUS3-C 6/8/10 HUS3-HF 8/10/14 HUS3-A 6 HUS3-I 6 HUS3-P 6 HUS3-PS 6 Version 2015-09 09 / 2015 1 HUS3 Anchor version HUS3-H 6 / 8 / 10
More information(English language translation, the original version is in French language) DeWalt PB-SS-PRO 01/02/ /06/2017. Plant 1 & 2
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationHilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1. Rebar BSt 500 S
Hilti HIT-HY 110 Injection Mortar System Benefits Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1 suitable for non-cracked concrete C 20/25 to C 50/60 suitable for dry and water
More informationEnglish translation prepared by CSTB - Original version in French language. Injection system Hilti HIT-RE 500 V3
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment Member
More informationHilti HVU-TZ foil capsule. HAS-TZ HAS-R-TZ HAS-HCR-TZ rod. Shock
Adhesive anchor Mortar system Benefits Hilti HVU-TZ foil capsule HAS-TZ HAS-R-TZ HAS-HCR-TZ rod - suitable for cracked and noncracked concrete C 20/25 to C 50/60 - high loading capacity - suitable for
More informationEuropean Technical Assessment ETA-15/0288 of 17/06/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationHRD-U 10 / - S 10 / -U 14 Frame anchor
HRDU 10 / S 10 / U 14 Frame anchor HRDU 10 / S 10 / U 14 Frame anchor Anchor version HRDU 10 Carbon steel Stainless steel HRDS 10 Carbon steel Stainless steel Benefits universal frame anchor for façade,
More informationEuropean Technical Approval ETA-08/0058
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationEuropean Technical Assessment. ETA-17/0237 of 15/05/2017. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011
More informationHigh-performance anchoring adhesive. n Styrene-free n Low odour n Low wastage n No transportation restrictions
Product Data Sheet Edition 23/12/2008 Identification no: 02 04 02 06 001 0 000020 Sika AnchorFix -2 Sika AnchorFix -2 High-performance anchoring adhesive Construction Description Uses Characteristics /
More informationInjection Adhesive VM-PY
Cartridge VM-PY 410 Coaxial cartridge Content: 410ml Range of loading: 0,3 kn - 39,4 kn Concrete quality: C20/25 - C50/60 Masonry: Solid brick, Hollow block Description The Injection Adhesive is a polyester-resin
More informationConcrete screw BSZ Steel/steel zinc flake coated
Concrete screw BSZ Steel/steel zinc flake coated Concrete screw BSZ-SU Concrete screw BSZ-SUH Concrete screw BSZ-SK Concrete screw BSZ-K Concrete screw BSZ-GK Approvals and Certificates Concrete screw
More informationEuropean Technical Assessment ETA-14/0454 of 11/12/2014
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationHilti HDA Submission Folder
Submission folder Hilti HDA Submission Folder Sample Submission and Approval Form 2-3 Product Information 4-8 Technical Data 9-14 Method Statement 15-16 Test Reports according to BS5080 HDA-T 17-57 HDA-TR
More informationPage 9 of European Technical Approval ETA-10/0280 Marking: Marking: Identifying Identifying mark: mark: Anchor Anchor identity: identity: Category Category: : S KA H (stainless steel) K (hot dip galvanized)
More informationEnglish translation prepared by CSTB - Original version in French language. MULTIEXPANSION Nylon Frame Anchor
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical
More informationGeneral Information. Installation Information Design Information Material Information Ordering Information
General Information General Information Drop-In Anchor ProDUCT DESCRIPTION The is a drop-in anchor which shows good performance for competitive price for typical mass applications. It can be used in a
More informationVF22PRO Chemical Injection System STYRENE-FREE INJECTION SYSTEM - VINYLESTER
CHEMICAL ANCHORING SYSTEMS TECHNICAL DATA SHEET VF22PRO Chemical Injection System STYRENE-FREE INJECTION SYSTEM - VINYLESTER STYRENE FREE - STYRENE FREE - LOW VOC VF22PRO is a versatile high-strength two-part
More information(English language translation, the original version is in French language) FM 753 A4
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEuropean Technical Approval ETA-98/0001
European Technical Approval ETA-98/0001 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEnglish translation prepared by CSTB - Original version in French language POWERS PB-PRO-S
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical
More informationEuropean Technical Assessment. ETA-12/0398 of 29/12/2017. General Part. Instytut Techniki Budowlanej. Technical Assessment Body issuing the
European Technical Assessment General Part of 29/12/2017 (English language translation the original version is in Polish language) Body issuing the European Trade name of the construction product Product
More informationR-RBP Rawlbolt - Bolt Projecting for use in cracked and non-cracked concrete.
Mechanical Anchors R-RBP Rawlbolt - Bolt Projecting for use in cracked and non-cracked concrete. World's most popular all-purpose expanding shield anchor - bolt projecting version Approvals and Reports
More informationSystem Components. Grades. General Information Installation Information
General Information SECTION CONTENTS AC100-PRO General Information Installation Information Vinylester Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The AC100-PRO is a two-component
More informationHSV Carbon steel with DIN 125 washer. HSV-BW Carbon steel with DIN 9021 washer and DIN 127b spring washer
HSV Stud ancor Ancor versions HSV Carbon steel wit DIN 125 waser HSV-BW Carbon steel wit DIN 9021 waser and DIN 127b spring waser Benefits - torque-controlled mecanical expansion allows immediate load
More informationHSV. with DIN 125 washer HSV-BW. Carbon steel. with DIN 9021 washer and DIN 127b spring washer
HSV Stud ancor Ancor versions HSV Carbon steel wit DIN 125 waser HSV-BW Carbon steel wit DIN 9021 waser and DIN 127b spring waser Benefits - torque-controlled mecanical expansion allows immediate load
More information(English language translation, the original version is in French language) 07/05/ /05/2018. Plant 1 & 2
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationAnchor Fastening Technology Manual. HIT-HY 170 mortar with rebar. Hilti HIT-HY 170 mortar with rebar (as post-installed conn.
Anchor Fastening Technology Manual Hilti HIT-HY 170 mortar with HIT-HY 170 mortar with rebar Version 2015-12 1 February 12, 2016 Hilti HIT-HY 170 mortar with rebar (as post-installed connection) Injection
More informationEuropean Technical Approval ETA- 10/0273
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationTrutek TCM380 PRO. Trutek Fasteners Polska Al. Krakowska 55 Sekocin nowy Rasxyn Poland T:
Features and Benefits Version 23/12/2013 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
More informationEnglish translation prepared by CSTB - Original version in French language
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical
More informationEuropean Technical Approval ETA-11/0344
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationGeneral Construction Supervisory Authority Approval
General Construction Supervisory Authority Approval (Translation of the German original text which has not been checked by the DIBt.) Approval no.: Z-21.8-2018 Period of validity: April 1, 2014 until:
More informationMULTI-MONTI Technical Manual
MULTI-MONTI Technical Manual Stand 04/2013 Technical Manual HECO-MULTI-MONTI Contents Instructions for fixing P. 3 Chapter 1 : Admissible loads in concrete as well as P. 4 anchor-characteristics for MMS-6
More information(English language translation, the original version is in French language) SPIT FIX3. Société Spit Route de Lyon F BOURG-LES-VALENCE France
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPSSURMARNE F77447 MarnelaVallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément à l
More informationSormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art.
ITH 165 Pe art. 72900 Application in noncracked concrete ITH 300 Pe art. 72940 ITH 410 Pe art. 72941 Content Page Product description 2 Properties and benefits 2 Sample applications 2 Applications and
More informationEuropean Technical Approval
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-6 WARSZAWA ul. FILTROWA tel.: (48 22) 825-04-7; (48 22) 825-76-55; fax: (48 22) 825-52-86; www.itb.pl Członek EOTA Egzemplarz archiwalny European Technical Approval ETA-3/0584
More informationEuropean Technical Approval
Zavod za gradbeništvo Slovenije Slovenian National Building and Civil Engineering Institute Dimičeva 12, 1000 Ljubljana, Slovenija Tel.: +386 (0)1-280 44 72 Fax: +386 (0)1-436 74 49 e-mail: info.ta@zag.si
More informationAC200+ Acrylic Injection Adhesive Anchoring System
GENERAL INFORMATION GENERAL INFORMATION AC200+ Acrylic Injection Adhesive Anchoring System PRODUCT DESCRIPTION The AC200+ is a two-component, high strength adhesive anchoring system. The system includes
More informationAPPENDIX A: Strength Design Performance Values
ADHESIVE ANCHORING SPECIALISTS APPENDIX A: Strength Design Performance Values SPECIFICATIONS AND DETAILS FOR INSTALLATION OF ANCHORS IN CONCRETE WITH G ADHESIVE Threaded Rod Diameter (d) /8 / /8 / 7/8
More informationEuropean Technical ETA-04/0023 Assessment of 17 October 2017 General Part
European Technical Assessment ETA-04/0023 of 17 October 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST INTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (00) 42 7 (2) 99 04 www.icc es.org ESR 20 Reissued 11/2017 This report is subject to renewal 11/201. DIVISION: 0 00 00 CONCRETE SECTION:
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC ES Listing Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESL 1067 Reissued 09/2017 This listing is subject to renewal 09/2018. DIVISION: 03 00 00
More information(English language translation, the original version is in Czech language) DEWALT BSC-PBZ-PRO. DeWalt Black & Decker Str Idstein Germany
TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p. Prosecká 811/76a CZ-190 00 Praha 9 Tel.: +420 286 019 458 Internet: www.tzus.cz Authorised and notified according to Article 10 of the Council Directive
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ESR 027 Reissued 2/207 This report is subject to renewal 2/209. DIVISION: 0 00 00 CONCRETE
More informationHilti HIT-RE 500 post-installed rebars
Injection mortar system Benefits Hilti HIT-RE 500 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) Static mixer - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity
More informationEuropean Technical Assessment ETA-14/0453 of 11/12/2014
ETA-Danmark A/S Göteborg Plads 1 DK-21590 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationLegacy report on the 1997 Uniform Building Code, the 2000 International Building Code and the 2000 International Residential Code.
LEGACY REPORT ER-2895 Reissued March 1, 2004 www.icc-es.org Business/Regional Office 5360 Workman Mill Road, Whittier, California 90601 (562) 699-0543 Regional Office 900 Montclair Road, Suite A, Birmingham,
More information(English language translation, the original version is in French language) Société SPIT Route de Lyon - B.P BOURG-LES-VALENCE FRANCE
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST-INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2302 Reissued 12/2017 This report is subject to renewal 12/2019. DIVISIO: 03 00 00
More informationAC50 Silver Adhesive Anchoring System
General Information General Information AC50 Silver Adhesive Anchoring System Product Description The AC50 Sliver is a two-component, adhesive anchoring system. The system includes injection adhesive in
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST-INSTALLED CONCRETE ANCHORS
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-1546 Reissued 03/2016 This report is subject to renewal 03/2018. DIVISION: 03 00 00 CONCRETE
More informationHILTI HY 150 REBAR DESIGN GUIDE
HILTI HY 150 REBAR DESIGN GUIDE HILTI HY 150 REBAR DESIGN GUIDE 1 HY150 Rebar Dowelling using Limit States Concrete Design ( A23.3-94) The design method presented here was originally based on Eurocode
More informationEuropean Technical Approval
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. FILTROWA 1 tel.: (48 22) 825-04-71; (48 22) 825-76-55; fax: (48 22) 825-52-86; www.itb.pl Autoryzowany i notyfikowany zgodnie z art.10 dyrektywy Rady
More informationE TA TECHNICAL REPORT. Design of Metal Anchors For Use In Concrete Under Seismic Actions. TR 45 Edition February 2013
E TA TECHNICAL REPORT Design of Metal Anchors For Use In Concrete Under Seismic Actions TR 45 Edition EUROPEAN ORGANISATION FOR TECHNICAL APPROVALS Table of Contents 1 Introduction 3 2 Scope 3 2.1 General...
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST-INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC-ES Listing Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ELC-4027 Issued 07/2017 This listing is subject to renewal 07/2018. DIVISION: 03 00 00 CONCRETE
More informationSEISMIC QUALIFICATION TESTING OF CONCRETE EXPANSION ANCHORS TO NUCLEAR STANDARDS
SEISMIC QUALIFICATION TESTING OF CONCRETE EXPANSION ANCHORS TO NUCLEAR STANDARDS T. S. Aziz 1), A. Ghobarah 2) 1) Atomic Energy of Canada Ltd, 2251 Speakman Drive, Mississauga, Ontario, Canada L5K 1B2
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 687 (6) 699 0 www.icc es.org ESR 8 Reissued 0/08 This report is subject to renewal 0/09. DIVISION: 0 00 00 MASONRY SECTION:
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2254 Reissued 12/2017 This report is subject to renewal 12/2019. DIVISION: 03 00
More informationETA-11/0093. hollow core slabs. fischerwerke GmbH & Co. KG. Klaus-Fischer-Straße Waldachtal DEUTSCHLAND. fischerwerke. of this assessment
Member of www.eou.üu TA Approval body for constniction productt nd types of constniction Bautechnisches Prüfamt An institution established by the Federai and Laender Governments * Designated sccording
More informationCHEMICAL /4" 3/8" to 5/8" /8" 3/4" to 1-1/4" 1 10
194 ASTM A193 GRADE B7 HIGH-STRENGTH CARBON, ZINC PLATED (ASTM B 633 YELLOW DICHROMATE) B7 (AISI 414) anchor rod is supplied with nuts meeting the requirements of ASTM Specification A 194, Grade 2H (ASTM
More informationEuropean Technical Approval
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. FILTROWA 1 tel.: (48 22) 825-04-71; (48 22) 825-76-55; fax: (48 22) 825-52-86; www.itb.pl Członek EOTA Draft European (English language translation the
More informationConstruction. Universal anchoring adhesive. Product Description. Tests. Product Data Sheet Edition _1. 1 Sika AnchorFix S 1/6
Product Data Sheet Edition 2014-01_1 Sika AnchorFix S Sika AnchorFix S Universal anchoring adhesive Product Description Styrenated polyester based two part anchoring adhesive. Construction Uses Characteristics
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 587 (52) 99 0543 www.icc es.org ESR 393 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 04 00 00 MASONRY
More informationEuropean Technical Approval ETA-07/0025
European Technical Approval ETA-07/0025 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Approval
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-6 WARSZAWA ul. FILTROWA tel.: (48 22) 825-04-7; (48 22) 825-76-55; fax: (48 22) 825-52-86; www.itb.pl Członek EOTA Egzemplarz archiwalny European Technical Approval ETA-2/0522
More informationEUROPEAN TECHNICAL ASSESSMENT ETA-17/0336
EUROPEAN TECHNICAL ASSESSMENT ETA-17/0336 HILTI ANCHOR CHANNELS & BOLTS A systematic approach to innovative anchoring Hilti now offers a vast range of Anchor Channels for a variety of applications to the
More information(English language translation, the original version is in French language) Upat UKA 3 with anchor rod C
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEuropean Technical Assessment ETA-16/0865 of 08/11/2016
ETA-Danmark A/S Göteborg Plads 1 DK-21590 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 687 (62) 699 04 www.icc es.org ESR 06 Reissued 0/207 This report is subject to renewal 0/208. DIVISION: 04 00 00 MASONRY
More informationEuropean Technical Approval
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. FILTROWA 1 tel.: (48 22) 825-04-71; (48 22) 825-76-55; fax: (48 22) 825-52-86; www.itb.pl Członek EOTA European English language translation - the original
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST-INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 43-6587 (56) 699-0543 www.icc-es.org ESR-384 Reissued 0/07 This report is subject to renewal 0/09. DIVISION: 03 00 00 CONCRETE
More informationHVAC Ductwork and Strut Channels Suspended Ceilings
General Information General Information Vertigo + Rod Hanger PRODUCT DESCRIPTION Vertigo+ is a one piece, all steel threaded fastening system for suspending threaded rod in applications such as pipe hanging,
More informationEuropean Technical Assessment ETA-10/0422 of 08/01/2016
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationEuropean Technical Approval
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. FILTROWA 1 tel.: (48 22) 825-04-71; (48 22) 825-76-55; fax: (48 22) 825-52-86; www.itb.pl Członek EOTA European Technical Approval English language translation
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST-INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC-ES Listing Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ELC-4027 Issued 07/2017 This listing is subject to renewal 07/2018. DIVION: 03 00 00 CONCRETE
More informationDock Bumpers and Support Ledgers Racking and Railing Attachments
General Information General Information Power-Bolt Heavy-Duty Sleeve Prouct Description The Power-Bolt anchor, is a heavy uty sleeve style, self-locking anchor which is vibration resistant an removable.
More informationETA-07/0291 of 30/06/2014. European Technical Assessment. Draft. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej
25 INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Draft Designated according to Article 29 of Regulation (EU)
More informationEuropean Technical Assessment ETA 14/0075 of 14/04/2014
SP Sveriges Tekniska Forskningsinstitut SP Certifiering Box 553 SE-371 23 Karlskrona SWEDEN Member of www.eota.eu Tel: +46 10 516 63 00 Web: www.sp.se Mail: eta-se@sp.se European Technical Assessment ETA
More informationEPCON C8. Cracked Concrete - Anchor Studs 43.1 CRACKED CONCRETE - CHEMICAL INJECTION 43.1 GENERAL INFORMATION
43.1 CRACKED CONCRETE - CHEMICAL INJECTION 43.1 GENERAL INFORMATION Product is a High Performance Pure Epoxy ing adhesive for use in Cracked and Non-Cracked concrete. For structures subject to external
More informationhors Anc Eaton's B-Line series fasteners 183
183 Glossary Prefix - Description Screw Dia. Length Suffix ACB - Concrete Anchor Bolt 4 - #4 75-3 /4" AN - Acorn Nut ACPD - Bang-IT 6 - #6 81-13 /16" CH - Combo Head ACPW - Wood-Knocker 8 - #8 87-7 /8"
More informationTrusted ICC ES HILTI, INC. SYSTEM E ANCHOR. Conformity! Look. Evaluation. ICC-ES Evaluation
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 2682 Reissued 08/2016 This report is subject to renewal 08/2018. DIVISION: 04 00
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-4143 Issued 01/2018 This report is subject to renewal 01/2019. DIVISION: 04 00 00
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3056 Reissued 10/2015 This report is subject to renewal 10/2017. DIVISION: 04 00 00 MASONRY
More information(English language translation, the original version is in French language) AT-HP Stainless Steel
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE 77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément à
More informationHigh Strength Epoxy tested in accordance to ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS High Strength Epoxy tested in accordance to ICC-ES AC308 2006 IBC Compliant ICC-ES Report No. 1137 DESCRIPTION/SUGGESTED SPECIFICATIONS* The epoxy resin and hardener are
More information