Microsoft Dynamics SL
|
|
- Ralph Tate
- 6 years ago
- Views:
Transcription
1 Microsoft Dynamics SL 2015 Year-End Close Procedures The information contained herein is the property of MIG & Co. and may not be copied, used or disclosed in whole or In part to any third party except with written approval of MIG & Co. or, if it has been authorized under a contract.
2 PLEASE NOTE: This document provides an all-inclusive list of tasks that may be run as part of the Year End close. Some of these tasks may not be relevant to your installation on the setup of SL at your site. Factors which would determine this would include: version of SL, modules installed, any customizations that may have been done and whether your company is on a Fiscal or Calendar year. We encourage you to contact MIG s Support Manager to discuss how to best implement the instructions contained in this document for your company. P : 855.MIG.CORP ( ) E : info@mig.com Page 2 of 31
3 CONTENTS SUMMARY... 4 DYNAMICS SL MODULE INCLUDED IN CLOSING... 5 FINANCIAL SERIES... 5 SUPPLY CHAIN & ORDERS... 5 PROJECT SERIES & PROJECT MANAGEMENT... 5 CLOSING SEQUENCE... 6 CLOSING PROCESS... 7 PURCHASING... 7 INVENTORY... 8 ORDER MANAGEMENT... 9 WORK ORDERS TIME AND EXPENSE FOR PROJECT PAYROLL HOW TO APPLY PAYROLL YEAR END UPDATES ACCOUNTS PAYABLE PRINTING 1099 S CALENDAR YEAR CONTROL MAGNETIC MEDIA TRANSMITTER TAB ACCOUNTS RECEIVABLE CASH MANGER ALLOCATOR PROJECT CONTROLLER GENERAL LEDGER MIG & CO. SUPPORT & TRAINING P : 855.MIG.CORP ( ) E : info@mig.com Page 3 of 31
4 SUMMARY Year-end closing for Microsoft Dynamics SL It is imperative to perform The Year-End close of Microsoft Dynamics SL. There two aspect to closing financial year; procedural and systematic. Your financial system includes many distinct steps that allows for closing the year and initializing new-year balances. If the year is not closed completely or steps have been missed in the process; some of the current-year and last-year fields may not display correct information in the system. This document provides a list of required and optional tasks for the Year - End close process for Accounts Payable, Accounts Receivables, General Ledger, Project Controller, Cash Manager, Payroll, Order Management, Inventory, Purchasing and Work Order. Each step will be discussed in detail under the Year - End Close Procedures section of the document for each module. Additional information on the Year - End close can be found in the last section. Navigation and instructions are provided for Microsoft Dynamics SL. Finalize all Applicable Transactions Reconcile Submodules to General Ledger Print Necessary Reports and Files Make a Back-up BEFORE CLOSING Begin Closing Process P : 855.MIG.CORP ( ) E : info@mig.com Page 4 of 31
5 DYNAMICS SL MODULE INCLUDED IN CLOSING General Ledger Payroll Accounts Payable Accounts Receivable Bank Reconciliation Cash Manager Financial Statement Translation Financial Series Purchasing Inventory Order Management Work Order Supply Chain & Orders Project Series & Project Management Time and Expense for Projects Allocator P : 855.MIG.CORP ( ) E : info@mig.com Page 5 of 31
6 CLOSING SEQUENCE SL System Closing Time and Expense Accounts Payable Purchasing Payroll Inventory Order Managment Accounts Receivable Cash Manager/ Bank Rec Allocator Project Contoller Word Orders General Ledger P : 855.MIG.CORP ( ) E : info@mig.com Page 6 of 31
7 CLOSING PROCESS Purchasing Purchasing module closing process includes tasks that other modules are dependent upon. Running Open Purchase order Report Determine Year End Open PO Accruals Run unvouchered Receipts Report Update Blanket PO for additional terms Close inactive PO s Delete or Complete Old Purchase Orders Purchase will close when Accounts Payable is closed. P : 855.MIG.CORP ( ) E : info@mig.com Page 7 of 31
8 Inventory Ensure all batches are released Update all pending Costs/Rates P : 855.MIG.CORP ( ) E : info@mig.com Page 8 of 31
9 Update Standard Costs this process will also update the cost for work orders. Update Kit Standard Costs In General Ledger Close Inventory for the Year. Order Management Although Order Management does not have screens for year-end close, there are few things to keep in mind while closing other modules. Update Pricing for Current Year Run Sales Journal prior to closing AR, Inventory and General Ledger Delete Old inactive orders. Transaction Period from Order Management is driven from Accounts Receivable. P : 855.MIG.CORP ( ) E : info@mig.com Page 9 of 31
10 Work Orders Work orders will impact several modules as they are processed. Following must be run and processed before closing the year. Complete all work orders that have been completed. Run Allocator to update costs Run GL to WIP reconciliation and reconcile WIP Accounts Period for Work Order and Costing is driven by Inventory Module. P : 855.MIG.CORP ( ) E : info@mig.com Page 10 of 31
11 Time and Expense for Project Ensure all timecard are approved and posted Ensure all expense items are approved and posted Update week maintenance for current year Update Worker Compensation Rates Reconcile and Company Expenses Post all labor costs through GL Labor Posting P : 855.MIG.CORP ( ) E : info@mig.com Page 11 of 31
12 Payroll Year-End processing typically done on 12/31. Process final payroll and period/quarter procedures. Calculate W2 s Review and Edit W-2s Print W-2 Forms Run Magnetic Media file for upload Apply Year-End Updates, available via CustomerSource download. Typically, new tax tables are installed after Year End payroll close. P : 855.MIG.CORP ( ) E : info@mig.com Page 12 of 31
13 How to Apply Payroll Year End Updates Obtain year end updates from Microsoft: CUSTOMERSOURCE Payroll in Microsoft Dynamics SL tracks important Employee W-2 information. At the beginning of a new year, there are some steps you can take to ensure your Payroll information is in balance. Below is a checklist outlining the general guidelines used for balancing and closing Payroll for the year. Your organization may have additional balancing steps. Upon completion of the final Payroll processing for the year, print and review the following reports for balancing the Payroll module: 941 Quarterly Federal Tax Worksheet Unemployment Tax Worksheet Earnings & Deductions report, Detail and Totals formats P : 855.MIG.CORP ( ) E : info@mig.com Page 13 of 31
14 Balance the 941 Quarterly Federal Tax Worksheet and the Unemployment Tax Worksheet with the Earnings & Deductions report, Totals format. Make a BACKUP of the database that can be restored in case an undesired data loss occurs. Use GL Closing to close the module for the year. For Payroll in a Fiscal Year database, the Year is closed in the period that ends December 31. Note Payroll must be closed for the current year before you can process Payroll for the New Year. Update deduction and earnings information for Employees such as new SUTA rates, new health insurance rates, etc. Update Payroll tax table information. Generate W-2s for Employees. Refer to W-2 Processing below. W-2 Processing The W-2 process in Microsoft Dynamics SL allows you to generate and print W-2s for your Employees and the Internal Revenue Service. All of the earnings and deductions to be printed on the W-2 including 401(k) information, dependent care information, etc., will be printed in the W-2 boxes as designated in Earnings Maintenance and Deduction Maintenance. Print and review the Earnings & Deductions report, Detail and Totals formats. If you are generating a magnetic media file for the Internal Revenue Service, access W2 Magnetic Media and verify the information is accurate. Run the W2 Calculation process. Print the W-2 Forms to plain paper and review the information for accuracy. Verify the totals balance with the totals from the Earnings & Deductions report, Totals format. P : 855.MIG.CORP ( ) E : info@mig.com Page 14 of 31
15 If changes are needed for specific Employees, you can make changes to W-2 amounts by opening the Options menu, checking Initialize Mode, accessing Employee W2 History, selecting the Employee that needs a correction, and entering the corrected information. If changes are needed for specific deductions, you can make these changes in Deduction Maintenance. Once these types of changes are made, the W2 Calculation process should be rerun. The Protect Edited W2 Information field in W2 Calculation specifies that W-2 information which has been edited for the calendar year will not change during subsequent W-2 form regeneration. This option can be selected and deselected as necessary and is not in effect during the initial processing run. When the W-2 information is accurate, print the W-2s on the appropriate forms. If generating a magnetic media file, access W2 Magnetic Media and generate the magnetic media file. Note Microsoft Dynamics SL will retain Employee W-2 information for as many years as specified in the Years To Retain Employee History field of PR Setup. Payroll Reports Balancing Tips Add the wages, withholdings, etc. from the four quarterly 941s filed for the year and verify that they match the totals on the W-2s and the totals on the Earnings & Deductions report, Totals format. Use the Earnings & Deductions totals to balance the W-2 information for state wages and state withholding amounts to the forms that are filed with your state taxing authority. Print the General Ledger Trial Balance, and compare with the Earnings & Deductions report, Totals format to balance the wage accounts, liability accounts, etc. The QTD and YTD information on the Earnings & Deductions report and the Unemployment Tax Worksheet come from the data in Employee History. If an error is found on either report, you can use Initialize Mode to correct the information for an Employee in Employee History and then reprint the report. P : 855.MIG.CORP ( ) E : info@mig.com Page 15 of 31
16 Accounts Payable Review open Accounts Payable files to ensure all documents for the year have been entered. Print or review the AP Batch Register to ensure there are no open Accounts Payable batches for the entire year, periods 01 through 12. P : 855.MIG.CORP ( ) E : info@mig.com Page 16 of 31
17 Finish\Release any open batches found in the above step. Run the Post Transactions process in the General Ledger module. Print or review the Vendor Trial Balance and General Ledger Trial Balance. Compare the account totals Vendor Trial Balance to the corresponding account balance on the General Ledger Trial Balance. If the numbers equal you are ready to close the year for the Accounts Payable module. If the numbers do not equal, then review the following: Review the beginning Accounts Payable balance for the year and match it to the ending account balance from last year s reports to ensure no entries have been made to prior years. Review the Detail General Ledger for any entries to the Accounts Payable account/subaccounts which did not originate from the Accounts Payable module. Review the GL Transactions Un-posted report to ensure no transactions for the current or future periods exist which could affect the General Ledger or Vendor balances. Review the Account Distribution report to ensure that the Accounts Payable account was properly debited for debit adjustments and Checks and properly credited for Vouchers and credit adjustments. Be aware of the effect of any void Checks when reviewing this report. Review the AP Transactions report for any batch detail which may come in questions as a result of reviewing the other reports. o If no differences are noted, you may want to verify the integrity of the Accounts Payable data by running the verification process in Accounts Payable Integrity Check screen, ensuring to only check the options that begin with verify. o If corrections are made, reprint the Vendor Trial Balance and the Trial Balance for the General Ledger for the filing. Any working papers to summarize reconciling items which are not corrected should be filed with the monthly reports. o If an Aged AP Report has not been run, print the report for the file. P : 855.MIG.CORP ( ) E : info@mig.com Page 17 of 31
18 Process 1099 s if appropriate. Reference KB for 1099 Year-End Closing Checklist. Printing 1099 s Ensure the 1099 Preview Report confirms proper vendors and balances (Note: 1099 Preview will show all 1099 Vendors, but the 1099 forms will ONLY print 1099 Vendors that have gone over the limit) Go to Reports and click 1099 Forms Report Note the Year (current or next) to print depending on the 1099 Year setting P : 855.MIG.CORP ( ) E : info@mig.com Page 18 of 31
19 1099 Calendar Year Control Only 2 years can be open at a given time for 1099 s Leave the PRIOR Year open and the CURRENT Year open Example: For the New Year 2016, The Current Year Should be 2015 and the Next Year should be This allows us to void checks for prior years and still enter check for the Current Year. Depending on your setting, Change Process Option to PURGE OLDEST YEAR if the CURRENT 1099 Year is 2014 ONLY; if you purge 2015, you will lose the 1099 data you need to print this year s 1099 s P : 855.MIG.CORP ( ) E : info@mig.com Page 19 of 31
20 1099 Magnetic Media Transmitter Tab The Transmitter Tab: Control Codes comes directly from the IRS Most Information populates directly from YOUR company maintenance, but can be changed prior to generating the file Add Contact Info Double check accuracy P : 855.MIG.CORP ( ) E : info@mig.com Page 20 of 31
21 P : 855.MIG.CORP ( ) E : info@mig.com Page 21 of 31
22 P : 855.MIG.CORP ( ) E : info@mig.com Page 22 of 31
23 Accounts Receivable Review open Accounts Receivable files to make sure all documents for the year have been entered. Print or review the AR Batch Register to make sure there are no open Accounts Receivable batches for the year. Finish or release any open batches. Run the General Ledger Post Transactions process to post any un-posted AR batches. Print or review the Customer Trial Balance and General Ledger Trial Balance. Compare the account totals on the Customer Period Trial Balance to the corresponding account balance on the General Ledger Trial Balance. If the numbers equal, you are ready to close the year for the Accounts Receivable module. o If the numbers do not equal, review the following or reference Microsoft Knowledge Base article for a complete guide to reconciling AR to GL: Review the beginning Accounts Receivable balance for the year and match it to the ending account balance from last year s reports to make sure no entries have been made to prior years. Review the Detail General Ledger ( ) for any entries to the Accounts Receivable accounts/subaccounts that did not originate from the Accounts Receivable module. Review the GL Transactions Un-posted report ( ) to make sure that no transactions for the current or future periods exist that may affect the General Ledger or AR Customer balances. Review the Account Distribution report ( ) to make sure that the Accounts Receivable account was correctly debited for invoices and debit memos and correctly credited for credit memos and payments. Review the AR Transactions report ( ) for any batch detail that you may need to answer questions as a result of reviewing the other reports. If no differences are noted, you may want to verify the integrity of the Accounts Receivable data by running the verification processes in Accounts Receivable Integrity Check ( ). Make sure you only select the options that start with verify. If corrections are made, reprint the AR Customer Trial Balance and the GL Trial Balance and file the reports. Any working papers to summarize reconciling items that are not corrected are filed with the monthly reports. P : 855.MIG.CORP ( ) E : info@mig.com Page 23 of 31
24 If an Aged AR Report has not been printed, run the Age Customer Detail process and then print the Aged AR report for the file. If your organization generates invoices through Project s Flexible Billing, you will need to process and post all of the Flexible Billing invoices to Accounts Receivable before you can close Accounts Receivable for the year. Close the Accounts Receivable module for the year in General Ledger Closing. Apply new Microsoft Dynamics SL Tax Tables. Cash Manger Enter all Cash Transaction and final charges on bank Statement Generate Consolidation for companies that require consolidation Read / Import Consolidation from subsidiaries P : 855.MIG.CORP ( ) E : info@mig.com Page 24 of 31
25 Clear and Check and Deposits Reconcile bank accounts Print Bank Reconciliations Print Check Register Close Period P : 855.MIG.CORP ( ) E : info@mig.com Page 25 of 31
26 Allocator All Allocator tasks must be completed before Project Controller can be closes. Indirect Rate Calculator must be run Allocator Processor Should be run and Report Printed. Close Project Year at Actuals P : 855.MIG.CORP ( ) E : info@mig.com Page 26 of 31
27 Project Controller Be sure the transactions are complete for all integrated modules your company is using, before beginning the closing process. From the Project Controller, run the Financial Transaction Transfer process to ensure all transactions have updated Projects. Project Controller must be closed at the end of each fiscal period. This closing process helps control a few areas, checking specifically, if: All sub modules have posted to the Projects The accounting modules are closed to additional entries All project charge entries are posted Exceptions exist, then the Closing process is prevented Any unprocessed Timecards exist Troubleshooting Tip: Ensure Project Balance Forward settings are accurate so amounts are calculated for moving amounts to the new year especially for projects that span fiscal years Balance Forward at Year End determines whether the year-end total of a projects budgets and actuals are rolled forward as the beginning balance for the coming year, during the year end Close Period process P : 855.MIG.CORP ( ) E : info@mig.com Page 27 of 31
28 Prior to closing the year, be sure that balance forward is checked on all projects that you want to have Project To Date information for. If this checkbox is not checked, only Month to Date and Year to Date information will be captured going forward. NOTE: If the module is closed for the year and some projects were not marked as Balance Forward, the balances can be corrected by changing the current period in PC Setup back to the last period of the previous year, then marking the Balance Forward option in Project Maintenance and running the closing process again. For ANNUAL Projects, or projects that are re-budgeted each year WITHOUT regard to the previous years, this check box should be clear so that the beginning balance is set to zero for the next year Close Period Screen If the closing process deems that the current period is also the last fiscal period of the year, the screen will change from BEGIN PROCESSING to BEGIN YEAR-END CLOSE, and Close Period closes the year. P : 855.MIG.CORP ( ) E : info@mig.com Page 28 of 31
29 General Ledger Prior to starting the year-end closing process, make a backup of the database that can be restored if needed. Complete the posting and closing procedures for all sub-modules. Verify that all General Ledger batches are released and posted. This can be done by running the General Ledger Batch Register Report for the fiscal year being closed using Select criteria of Field= batch.status, Operator= IN, Value= B, H, S, U. Any batches appearing on the report will require further processing. In the case of B or H status batches the release and post process will be necessary or the batch can be deleted if so desired. Any U status batches, with a period to post within the fiscal year being closed, must be posted. U status General Ledger batches can be selected and deleted from Journal Transactions while in Initialize Mode. If Allocations are used, verify that the batches have been generated and posted. This can be done by running the General Ledger Batch Register Report, Detail format, using Select criteria of Field= batch.battype, Operator= Equal, Value= A. If any of the correcting transactions affect accounts/subaccounts used in Allocations, rerun the Generate Allocations process. The Trial Balance and Detail General Ledger reports can be run to verify the accuracy of the account balances. P : 855.MIG.CORP ( ) E : info@mig.com Page 29 of 31
30 Print and review the financial statements using Management Reporter, FRx or your statement generation application. On Balance Sheet reports, verify that Total Assets equals Total Liabilities and Equity. On Income Statement reports, verify that Net Income (Loss) equals the amount shown on the Trial Balance Report. Verify other key numbers on the statements such as total revenue, gross profit, current assets and current liabilities. After verifying the accuracy of the reports, the year-end closing process is ready to be run. After completing the year-end closing process, back up the database. The year-end closing process will do the following: o Set the current period to the first period of the new fiscal year. o Establish the New Year s beginning balances for the asset and liability accounts. o Zero the income and expense accounts and close the Year to Date Net Income account into the Retained Earnings Account. o Retain the year s period to date and year to date history. P : 855.MIG.CORP ( ) E : info@mig.com Page 30 of 31
31 MIG & CO. SUPPORT & TRAINING MIG Support plans are reliable and consistent support service programs for businesses running Microsoft Dynamics. Some of our support benefits include: Support with Microsoft Dynamics products Support with any related thirdparty add-ons Fixed rate plans Contact us now for more information about our plans and rates at MIG Training can be customized to your needs Some of our training benefits include: Various training options Available with Support Plans* Group discounts Contact us for more info at P : 855.MIG.CORP ( ) E : info@mig.com Page 31 of 31
Accounts Payable Release 2015
Accounts Payable Release 2015 Disclaimer This document is provided as-is. Information and views expressed in this document, including URL and other Internet Web site references, may change without notice.
More informationActivant Prophet 21. Perfecting Your Month and Year End Closing Routines
Activant Prophet 21 Perfecting Your Month and Year End Closing Routines This class is designed for System Administrators Operation Managers Accounting Managers Objectives Suggested month end and year end
More informationMAS90 & MAS200 Order of Closing
Business & Accounting Solutions, LLC 3900 Orchard Lake Rd, Suite 60 Farmington Hills, MI 8336 8-893-1060 phone, 8-893-1063 fax www.orionbas.com MAS90 & MAS00 Order of Closing Year-end and Period End processing
More informationYear End Close Procedures - 1 -
Microsoft Dynamics GP 2011 Year-End Closing Procedures This manual should be used as a guide along with the screen specific help, printed Microsoft manuals and on-line help available through CustomerSource,
More informationClassic General Ledger Balancing Flow Charts
Classic Balancing Flow Charts Release date: 2/16/2011 Version: Classic (2.x) Summary: A flow chart for balancing accounts to the. Contents Balancing the Utility Billing Cash Clearing Account... 2 Balancing
More informationSAGE ACCPAC. Sage Accpac ERP. Converting from Simply Accounting by Sage
SAGE ACCPAC Sage Accpac ERP Converting from Simply Accounting by Sage 2008 Sage Software, Inc. All rights reserved. Sage Software, Sage Software logos, and all Sage Accpac product and service names are
More informationYear-End Close Checklists
Sage Master Builder Year-End Close Checklists Calendar-year, Fiscal-year, Combined NOTICE This document and the Sage Master Builder software may be used only in accordance with the accompanying Sage Master
More informationOracle ERP Cloud Period Close Procedures
Oracle ERP Cloud Period Close Procedures Release 13 O R A C L E W H I T E P A P E R A U G U S T 2 0 1 7 Table of Contents Introduction 8 Chapter 1 Period Close Dependencies 9 Chapter 2 Subledger Accounting
More informationSession 1-8 Sage 300 CRE: Month-End, Quarter-End, Year-End Procedures Lab. Presented by: Kathy Lewis, Kathy Lewis Consulting
Session 1-8 Sage 300 CRE: Month-End, Quarter-End, Year-End Procedures Lab Presented by: Kathy Lewis, Kathy Lewis Consulting Kathy@klcvision.com Credits/Revision History Original Author(s): Lenni Witt,
More informationFinance Module Best Practices Dynamics GP. Speaker Name: McDowell, VanJura, Eichner GPUG
Finance Module Best Practices Dynamics GP Speaker Name: McDowell, VanJura, Eichner GPUG Mike McDowell Experience COO, Mekorma Software CFO for 15 years 12 years working with Dynamics GP Believes in: Working
More informationMonth End Closing Procedures
Month End Closing Procedures Overview Throughout the month journal entry transactions are created by processing of accounts payable, accounts receivable, billing, cash receipts, etc. The following is a
More informationPastel Accounting level 1 course content (2-day)
http://www.multimediacentre.co.za Cape Town: 021 790 3684 Johannesburg: 011 083 8384 Pastel Accounting level 1 course content (2-day) Course Description: Bookkeeping Fundamentals course is a comprehensive
More informationMonth End Closing Procedures
Overview: Month End Closing Procedures Throughout the month journal entry transactions are created by processing of accounts payable, accounts receivable, billing, cash receipts, etc. The following is
More informationSage 500 ERP Year-end Closing Procedures
Sage 500 ERP Year-end Closing Procedures The following tips and tricks will help you get ready to close out the old year (2017) in Sage 500 and ring in the New Year (2018)! First a word of caution about
More informationClarity Accounts Payable Year-end Procedure Guide 2017
Clarity Accounts Payable Year-end Procedure Guide 2017 Clarity Accounts Payable Year-end Procedure Guide - 2017 Table of Contents Caselle Clarity Accounts Payable Year-end Checklist 2017... 1 Welcome back!...
More informationEnd of Month Processing
End of Month Processing Ver 040510 Overview: Each of the MAS accounting modules, excluding Bill of Lading, Packaging, Custom Office, Library Master and Report Master require a closing process at or near
More informationSage MAS 90 and 200 Product Update 2 Delivers Added Value!
Sage MAS 90 and 200 Product Update 2 Delivers Added Value! The second Sage MAS 90 and 200 4.4 Product Update 4.40.0.2 is available via a compact download from Sage Online. Delivering additional features
More informationFinance Month End. Deltek Maconomy Deltek, Inc. Deltek proprietary, all rights reserved.
Finance Month End Deltek Maconomy Copyright Information While Deltek has attempted to make the information in this document accurate and complete, some typographical or technical errors may exist. Deltek,
More informationHow to Configure the Initial Settings in SAP Business One
SAP Business One How-To Guide PUBLIC How to Configure the Initial Settings in SAP Business One Applicable Release: SAP Business One 8.8 European Localizations English July 2009 Table of Contents Introduction...
More informationClubConnect Accounts Payable Understanding Invoice and Check Types for Easy Processing
ClubConnect Accounts Payable Understanding Invoice and Check Types for Easy Processing Webinar Topics Invoices... 3 Special Invoice Situations... 3 Prepaid Invoices... 3 Reciprocal Club Invoices... 8 Invoices
More informationDynamics GP Year-End Closing
Dynamics GP Year-End Closing Tom Jablonski tjablonski@manersolutions.com Year-End Close All Year-End processes are run from Routines 1 Year-End Close **** BACKUP, BACKUP, BACKUP **** Always backup before
More informationQUICKBOOKS PRO 2008 WORKSHOP 6 THE CORNER DRESS SHOP
QUICKBOOKS PRO WORKSHOP 6 THE CORNER DRESS SHOP Mini Practice Set Reviewing the Accounting Cycle for a Merchandise Company This workshop will help you review the key concepts of a merchandise company by
More informationHi-Tech Software Solutions Year-End Processing: Calendar Year End 12/31/2013
Year-End Processing Instructions For Calendar Year-End December 31, 2013 TIP: Do not wait until the last minute for filing and printing deadlines! Hi-Tech Software, Inc., P. O. Box 2150, Skowhegan, ME
More informationHow do I Reconcile MCPS Invoices?
How do I Reconcile MCPS Invoices? Overview Purpose This document explains how schools can reconcile Montgomery County Public School (MCPS) invoices to requisitions charged to their cash account and to
More informationMONTH END CLOSING INSTRUCTIONS FOR ACTUALS LEDGER
MONTH END CLOSING INSTRUCTIONS FOR ACTUALS LEDGER Revised by Financial Operations 05/20/2009 Month End Closing Instructions for ACTUALS Ledger CONTENTS: OVERVIEW 3 HELP 5 DETERMINING IF A BUSINESS UNIT
More informationShelbyNext Financials: Payroll Foundations (Course #N135)
ShelbyNext Financials: Payroll Foundations (Course #N135) Presented by: Mark Fisher Shelby Consultant 2017 Shelby Systems, Inc. Other brand and product names are trademarks or registered trademarks of
More informationSanjay Srinivas PH:
Microsoft Dynamics AX 2012 Training course Content [Financials I, II, and Fixed Assets] Financials I Financials I course introduces the student to the Microsoft Dynamics AX 2012 General Ledger Accounting
More informationContents OVERVIEW... 3
Contents OVERVIEW... 3 Feature Summary... 3 CONFIGURATION... 4 System Requirements... 4 ConnectWise Manage Configuration... 4 Configuration of Manage Login... 4 Configuration of GL Accounts... 5 Configuration
More informationScrap Dragon to QuickBooks Interface Revised 10/2/14
Scrap Dragon to QuickBooks Interface Revised 10/2/14 General Scrap Dragon is designed so that accounting data can be passed electronically to QuickBooks. This is a one-way transfer and no information from
More informationEMS LIVE! CONFERENCE. Using the Pricing and Billing Functions Within your Operation. Melissa Butler Implementation Consultant October 16, 2017
EMS LIVE! CONFERENCE Using the Pricing and Billing Functions Within your Operation Melissa Butler Implementation Consultant October 16, 2017 Pricing and Billing Topics Terminology EMS Billing-Cycle Process
More informationFinancial Transfer Guide DBA Software Inc.
Contents 3 Table of Contents 1 Introduction 4 2 Why You Need the Financial Transfer 6 3 Total Control Workflow 10 4 Financial Transfer Overview 12 5 Multiple Operating Entities Setup 15 6 General Ledger
More informationContents OVERVIEW... 3
Contents OVERVIEW... 3 Feature Summary... 3 CONFIGURATION... 4 System Requirements... 4 ConnectWise Manage Configuration... 4 Configuration of a ConnectWise Manage Login... 4 Configuration of GL Accounts...
More informationSage What s New. March 2018
Sage 100 2018 What s New March 2018 2018 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned herein are the trademarks of The Sage Group
More informationSage 100. Payroll User Guide. August 2017
Sage 100 Payroll User Guide August 2017 This is a publication of Sage Software, Inc. 2017 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names
More informationChapter 11 Vendors & Purchases. Copyright 2009 by The McGraw-Hill Companies, Inc. All Rights Reserved.
Chapter 11 Vendors & Purchases McGraw-Hill/Irwin Copyright 2009 by The McGraw-Hill Companies, Inc. All Rights Reserved. Vendors & Purchases Chapter 11 begins Part 3 of the book: Peachtree Complete Accounting
More informationMicrosoft Dynamics GP. U.S. Payroll
Microsoft Dynamics GP U.S. Payroll Copyright Copyright 2012 Microsoft. All rights reserved. Limitation of liability This document is provided as-is. Information and views expressed in this document, including
More informationCASELLE Classic Payroll. User Guide
CASELLE Classic Payroll User Guide Copyright Copyright 1987-2008 Caselle, Inc. All rights reserved. This manual has been prepared by the Caselle QA documentation team for use by customers and licensees
More informationQuickBooks Practice Test
QuickBooks Practice Test Setup 1. During the Advanced Setup, you can turn on and off which features in the EasyStep Interview? a. Sales taxes b. Inventory c. Progress Invoicing d. All of the above 2. During
More informationQuick Start Guide. Taking A Payment & Printing A Receipt
Quick Start Guide Taking A Payment & Printing A Receipt Table of Contents Key Terms...3 Billing Types... 3 Premium Sent.. 3 Financing.. 3 Agency Fees....3 Taking A Payment.. 4 When Issuing A Policy 4 Agency
More information2. Which of the following statements is true when configuring a group chart of accounts?
Time 120 minutes Chart of Accounts 1. A chart of accounts ( Multi ) a. can be allocated to multiple company code b. can be defined as the group chart of accounts c. only contains definitions for G/L accounts
More informationYear End s W2 s. Presented By: Katie Green
Year End 1099 s W2 s Presented By: Katie Green Release 17.04.00 will be available 12/29/2017 1099 (1.) Financial Accounting and Reporting System (PF1) Year End Processing Menu (PF12) Calendar Year End
More informationSage 100 Direct Deposit. Getting Started Guide
Sage 100 Direct Deposit Getting Started Guide This is a publication of Sage Software, Inc. 2017 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service
More informationACCPAC FUNDAMENTALS. 1. It offers powerful analysis and reporting tools for accounting, finance, and auditing endusers
ACCPAC FUNDAMENTALS A. FEATURES OF ACCPAC SYSTEM ACCPAC System The ACCPAC for Windows Series is a Windows accounting software, which provides a comprehensive business management solution for corporate
More informationPayroll Table of Contents
Payroll Table of Contents I. Payroll, Getting Started...1 General Description... 1 Reports and Forms... 2 Terminal Inquiry Options... 3 Setting Up the Basic Data Files... 4 Setting Up the Payroll System
More informationPEACHTREE COMPLETE 2009 WORKSHOP 6 THE CORNER DRESS SHOP
PEACHTREE COMPLETE 2009 WORKSHOP 6 THE CORNER DRESS SHOP Mini Practice Set Reviewing the Accounting Cycle for a Merchandise Company This workshop will help you review the key concepts of a merchandise
More informationKianoff & Associates Crystal Clear Reports for Sage 100
Kianoff & Associates Crystal Clear Reports for Sage 100 We have developed Crystal Reports for all current versions of Sage 100 and are available for most all modules. Accounts Payable BP801- Vendor File
More informationPurchase Order Entry. with Purchasing Management and On-Order Tracking Part #103. User Manual
Purchase Order Entry with Purchasing Management and On-Order Tracking Part #103 User Manual Version 7.3 Information in this document is subject to change without notice and does not represent a commitment
More informationChapter 3. Accounting for Labor
Chapter 3 Accounting for Labor Learning Objectives LO1 Distinguish between features of hourly rate and piece-rate plans. LO2 Specify procedures for controlling labor costs. LO3 Account for labor costs
More informationWorkbook
Workbook 00-21-601-35057 2005 Sage Accpac International, Inc. All rights reserved. Sage Accpac International, Inc. Publisher No part of this documentation may be copied, photocopied, reproduced, translated,
More informationFinancial Year End Processing
Financial Year End Processing 2009-2010 Pronto is a registered trademark and PRONTO-Xi is a trademark of Pronto Software Pty Ltd (ABN 47 001 337 248) All other products mentioned are trademarks or registered
More informationMicrosoft Dynamics GP. Purchase Order Processing
Microsoft Dynamics GP Purchase Order Processing Copyright Copyright 2007 Microsoft Corporation. All rights reserved. Complying with all applicable copyright laws is the responsibility of the user. Without
More informationHOW TO... Set Up Payroll Allocations
Document Ref: Date: PR-HT014 Oct-02-2014 Document Version: 1.0 Regions: US/CA/AUS Earliest available version of COINS: 10.23 These notes are published as guidelines only. This How to Guide may contain
More informationIntroduction to Bookkeeping
Introduction to Bookkeeping Course map This document outlines the course structure. Course orientation Lesson 1: Welcome Lesson 2: Getting your diploma Lesson 3: How do I study this course? Unit 1: Welcome
More informationHeadMaster Billing for Schools
HeadMaster Billing for Schools 090422.1033 Table of Contents HeadMaster Billing Setup... 3 Assigning Billing Codes... 8 Entering and Posting Invoices... 11 Entering and Posting Payments... 17 Billing Reports...
More informationMicrosoft Dynamics GP. Purchase Order Processing
Microsoft Dynamics GP Purchase Order Processing Copyright Copyright 2005 Microsoft Corporation. All rights reserved. Complying with all applicable copyright laws is the responsibility of the user. Without
More informationReporting and Dashboards
Reporting and Dashboards Page i Copyrights 2002-2011 Propertyware, Inc. All rights reserved. No part of this publication may be reproduced, transmitted or stored in any archives without the expressed
More informationSage 100 Contractor Advanced Payroll
Session 4-1 Thursday, October 12 8:30am 10:00am Room 619 Session 4-1 Sage 100 Contractor Advanced Payroll Presented By: Kathy Gotzenberg Construction kgotzenberg@cbs-solution.com Original Author(s): Kathy
More informationMARKET LINE COMPUTERS TOTAL RENTAL USER MANUAL
MARKET LINE COMPUTERS TOTAL RENTAL USER MANUAL CONTRACT FUNCTIONS... 4 OPENING A NEW RENTAL CONTRACT... 5 CREATING A RENTAL RESERVATION... 6 RESERVATIONS... 7 LONG-TERM CONTRACTS... 8 CREATING A QUOTE...
More informationFoundation Pack (ID: 14,005,200) Designed for Dynamics NAV 2009 Classic or RTC with 49 great features all in one FOB
Foundation Pack (ID: 14,005,200) Designed for Dynamics NAV 2009 Classic or RTC with 49 great features all in one FOB Help our environment Do not print this document Why Foundation Pack from Cost Control
More informationHFTP Hospitality Financial and Technology Professionals
About our Sample Accounting Jobs Descriptions for Clubs: The HFTP Americas Research Center, with guidance from members of the HFTP Club Advisory Council, has developed example job descriptions for accounting
More informationDynamics GP User Group. December 13, 2016
Dynamics GP User Group December 13, 2016 Agenda 2 Welcome Assurance Services Year-End Close Year-End Update/What s New Assurance Services Overview Assurance Services Who We Are Strategic, proactive and
More informationDefect Repair Report as of 9/12/2014
27.04 Page 1 of 16 Release Notes By Module Framework The system no longer bans you from the EFI Pace refresh screen. 27.04-512 Framework The system now recognizes the Log In Automatically setting on the
More informationSage What s New. December 2017
Sage 100 2018 What s New December 2017 2017 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned herein are the trademarks of The Sage
More informationCHAPTER 10 ACQUISITION AND PAYMENTS
CHAPTER 10 ACQUISITION AND PAYMENTS In Chapter 9, your students set up a merchandising business and entered vendors and inventory items. In Chapter 10, they acquire inventory (make purchases) and make
More informationHow to Review Standard Orders and Process Billing. Table of Contents
Table of Contents Overview... 2 Objectives... 2 Display List of Open Standard Orders... 3 Review Details of Standard Order... 6 Review Billing of Prior-Period Services... 20 Display, Change or Cancel Invoice...
More informationSage Release Notes. March 2018
Sage 100 018. Release Notes March 018 018 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos, and Sage product and service names mentioned herein are the trademarks of The Sage
More informationAccount Determination in SAP
Manish Patel Account Determination in SAP Bonn Boston Contents at a Glance 1 Overview... 15 2 General Ledger Transactions... 35 3 Accounts Receivable/Accounts Payable Transactions... 57 4 Tax Transactions...
More informationBusiness Requirements Definitions
Business Requirements s Department of Financial Services Date: 01/19/2017 Revision: Version 2.0 Table of Contents Overview... 3 Priority Field Values s... 4 Functional Requirements Categories... 5 Accounts
More informationContents OVERVIEW... 3 CONFIGURATION... 4
Contents OVERVIEW... 3 Feature Summary... 3 CONFIGURATION... 4 System Requirements... 4 ConnectWise Manage Configuration... 4 Configuration of Manage Login... 4 Configuration of GL Accounts... 5 Configuration
More informationContents OVERVIEW... 3
Contents OVERVIEW... 3 Feature Summary... 3 CONFIGURATION... 4 System Requirements... 4 ConnectWise Manage Configuration... 4 Configuration of Manage Login... 4 Configuration of GL Accounts... 5 Configuration
More informationGeneral Accounting November 15,
November 15, 2017 2017.2 Copyright 2005, 2017, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions
More informationRB8 Training Orientation Essential Training overview 1 Recommended Lesson Plans By Department 1
II RB8 Essential Training Table of Contents RB8 Training Orientation Essential Training overview 1 Recommended Lesson Plans By Department 1 RB8 Training Syllabus How to use modules 2 2 Case Management
More informationF200 Financials: Intermediate Training Guide
F200 Financials: Intermediate Training Guide Acumatica ERP 5.0 Last Revision: 2/23/2015 Contents 2 Contents Copyright...4 Introduction... 5 How to Use This Course...6 Part 1: Configuring Branches and Subaccounts...9
More informationSage ERP X3 Finance
Finance www.goism.com 877-496-5350 sales@goism.com Finance Sage ERP X3 Finance covers financial, personal, cost, and budget accounting, commitments, and fixed assets. The finance capabilities of Sage ERP
More informationVendor tracking. Log vendor terms for automatic calculation of discount amounts and payment dates.
Accounts Payable Accounts Payable puts you in charge of the entire payables process from the minute invoices come in your door, through the approval process, payment selection, and check printing. Invoice
More informationQUICKBOOKS ONLINE ACCOUNTANT. QuickBooks Online Certification Training Guide
QUICKBOOKS ONLINE ACCOUNTANT QuickBooks Online Certification Training Guide QuickBooks Online Certification Training Legal Notices 2017 Intuit Inc. All rights reserved. Intuit, the Intuit logo, QuickBooks,
More informationDESKTOP PAYROLL Getting Started Guide
DESKTOP PAYROLL Getting Started Guide DESKTOP PAYROLL Getting Started Guide Welcome to QuickBooks Desktop Payroll QuickBooks Desktop Payroll gives you the tools you need to efficiently manage your payroll.
More informationEnd-of-Year & Beginningof-Year
5 End-of-Year & Beginningof-Year Transactions In Chapter 5 of Accounting Fundamentals with QuickBooks Online Essentials Edition, you will complete end-of-year adjusting entries and print financial statements.
More informationTaiRox Productivity Tools for Sage 300
Tools for all modules are available for $1495 + $300 per year, a single module's tools for $995 + 200 per year. This product is written as an SDK Application, integrating seamlessly with the desktop, activation
More informationGuide to Migrating Data Sage 50 to Sage 200
Guide to Migrating Data Sage 50 to Sage 200 Copyright statement Sage (UK) Limited, 2011. All rights reserved. If this documentation includes advice or information relating to any matter other than using
More informationLIBRARY OF OFFERINGS. January 2018
LIBRARY OF OFFERINGS January 2018 Disclaimer Copyright 2018 by IQMS All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including
More informationWelcome to the topic on Opening Balances.
Welcome to the topic on Opening Balances. 1 In this topic, you will learn the various options for entering beginning balances for business partners, inventory, and G/L accounts. You will also learn how
More informationSage Master Builder Product Overview
Sage Master Builder Product Overview NOTICE This document and the Sage Master Builder software may be used only in accordance with the accompanying Sage Master Builder End User License Agreement. You may
More informationBillQuick-QuickBooks Advanced Integration Guide 2016
BillQuick-QuickBooks Advanced Integration Guide 2016 CONTENTS INTRODUCTION 1 HOW TO USE THIS GUIDE 1 SOFTWARE EDITIONS SUPPORTED 2 HOW INTEGRATION WORKS 2 MODES OF SYNCHRONIZATION 3 INTEGRATION RULES 4
More informationAccounts Receivable Invoicing
Accounts Receivable Invoicing Table of Contents Invoicing... 1 Objectives... 1 Introduction to Invoices... 1 Introduction to Invoices... 1 Quick Entry... 1 Cost Plus... 2 Introduction to Invoices Key
More informationItem. Item / Warehouse. Item / Warehouse / Location. Item / Warehouse / Location / Lot. Item / Warehouse / Location / Lot / Container
Inventory Transaction Effects Item Inventory Transactions Warehouse Location / Lot Location Updates appropriate levels of Inventory automatically Location / Lot Location / Lot / Container Item Transaction
More informationBillQuick MYOB Integration
Time Billing and Business Management Software Built With Your Industry Knowledge BillQuickMYOB Integration Integration Guide BQE Software, Inc. 2601 Airport Drive Suite 380 Torrance CA 90505 Support: (310)
More informationACCOUNTING SERVICES ON-LINE ACCOUNTING SOFTWARE RECEIVABLES LITE PLUS
ON-LINE ACCOUNTING SOFTWARE Internet access 24-7 to all your critical financial information Mobile Version to increase your flexibility and options Task Manager Module to guarantee response time Chat Support
More informationBillQuick-Sage 50 Integration Guide 2017
BillQuick-Sage 50 Integration Guide 2017 (866) 945-1595 www.bqe.com info@bqe.com CONTENTS INTRODUCTION 1 HOW TO USE THIS GUIDE 1 SOFTWARE EDITIONS SUPPORTED 1 HOW INTEGRATION WORKS 2 INTEGRATION RULES
More informationSage Accpac ERP 5.6A. What's New
Sage Accpac ERP 5.6A What's New 2009 Sage Software, Inc. All rights reserved. Sage, the Sage logos, and all Sage Accpac product and service names mentioned herein are registered trademarks or trademarks
More informationPAYROLL USER S GUIDE
PAYROLL USER S GUIDE Payroll User s Guide Copyright Notification At Cougar Mountain Software, Inc., we strive to produce high-quality software at reasonable prices. We can only do this, however, if our
More informationACCOUNTING (ACNT 1303) CHAPTER 1 The Nature of Accounting
CHAPTER 1 The Nature of Accounting NAME Skills Review 1-1 Skills Review 1-2 Skills Review 1-3 Skills Review 1-4 Skills Review 1-5 Skills Review 1-6 Skills Review 1-7 1-1A 1-2A 1-3A 1-4A 1-5A (Use the example
More informationGovt. Contracting, Dynamics 365 Operations Implementing Dynamics 365 Operations for Govt. Contractors PVBS
Implementing Dynamics 365 Operations for Govt. Contractors PVBS Contents Background... 4 Setups... 4 Project Management and Accounting... 4 Ledger Posting Setup... 4 Category Groups... 4 Category Group
More informationThe Episcopal Diocese of Kentucky
The Episcopal Diocese of Kentucky Internal Control Questionnaire Manual of Business Methods in Church Affairs (Spring 2012) Chapter II: Internal Controls, Section C The following Internal Control Questionnaire
More informationCash Reconciliations and Cash Handling
Cash Reconciliations and Cash Handling WASBO Accounting Conference March, 2016 Handling Cash Cash may be the most vulnerable asset in your LEA. How do you safeguard your cash? Timely reconciliation of
More informationInvoice Collaboration with SNC Supplier
SAP Training Source To Pay Invoice Collaboration with SNC Supplier External User Training Version: 4.0 Last Updated: 03-Apr-2017 3M Business Transformation & Information Technology Progress set in motion
More informationGeneral Business Accounting System
General Business Accounting System We understand that an accounting system is really all about: Better Decision Making As a business grows it becomes more difficult for management to keep up with all the
More informationCHAPTER 5 INFORMATION TECHNOLOGY SERVICES CONTROLS
5-1 CHAPTER 5 INFORMATION TECHNOLOGY SERVICES CONTROLS INTRODUCTION In accordance with Statements on Auditing Standards Numbers 78 and 94, issued by the American Institute of Certified Public Accountants
More informationPoint Of Sales. Below is the step to enable Optimum Point Of Sales module. Step 1. As shown in the figure, click the menu from the ribbon bar.
Point Of Sales Below is the step to enable Optimum Point Of Sales module. Step 1 As shown in the figure, click the menu from the ribbon bar. Step 2 Select the Modules item form the drop down list. 1 P
More informationAccounting Specialist I Accounting Specialist II Accounting Specialist III Class Specification
Accounting Specialist I Accounting Specialist II Accounting Specialist III Class Specification FLSA Designation: Non-Exempt Effective: 03/2004 Revised: N/A DEFINITION Under general supervision (Accounting
More information