Meter, PD Series, H8-S1, S3, S5, S6 and S7
|
|
- Maximilian Murphy
- 6 years ago
- Views:
Transcription
1 PARTS LIST Meter, PD Series, H8-S1, S3, S5, S6 and S7 Bulletin PO01010 Issue/Rev. 0.2 (1/18)
2 2 Bulletin PO01010 Issue/Rev. 0.2 (1/18)
3 Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 1 Adapter Adapter, Calibrator Adjusting Stem Blank Calibrator: Dummy Standard Temperature Corrected, Standard Temperature Corrected, Special Temp. or API 5 Cap: xxx xxx xxx Standard NACE Clamp, Oil Tube Coupling, Drive Coupling, Drive: S S Coupling, Input Coupling, Jackshaft Cover Assembly, Outer: S7 Only P All Others, Standard NACE Bushing Pin, Groove, 3/16 x 3/8" Shaft, Calibrator Drive Gear Shaft, Idler Pinion Gear Cover, Knob Eyebolt Flange, Packing Gland Flange, Temperature Well Plug (Previous Design) 20 Gasket, Temperature Well (Previous Design) Gasket, Cover Plate Gasket, Packing Gland Gear, Calibrator Drive: 24 Bushing: U.S. Barrels, Standard and All Iron U.S. Barrels, LPG Hectolitres, Standard and All Iron Hectolitres, LPG Standard and All Iron LPG Pin Bulletin PO01010 Issue/Rev. 0.2 (1/18) 3
4 Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 26 Gear, Intermediate Pinion: U.S. Barrels, Standard and All Iron U.S. Barrels, LPG Hectolitres, Standard and All Iron Hectolitres, LPG Bushing, LPG Only Pin Gear, Jackshaft Pinion: Standard and All Iron (All) LPG (All) Bushing, LPG Only * Pin Gland, Packing: Buna-N Viton PTFE NACE Housing, Gear: Standard and All Iron LPG Bushing: Standard and All Iron LPG Dowel Housing, Outer: S1, S3, S6 (Standard) S5, S7 (Standard) P S1, S3 NACE Lubrication Assembly Fitting, Grease Nipple Nut: S1, S S3, S S O-Ring, Cover: Buna-N, S7 Only Buna-N, All Others Viton, S7 Only Viton, All Others PTFE O-Ring, Packing Gland: 4 Bulletin PO01010 Issue/Rev. 0.2 (1/18)
5 Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 Buna-N Viton Oiler Pin, Cotter Pin, Counter Drive Coupling, 1/16" x 5/8" Pin, Groove, 1/16 x 1/2" Pin, Groove, 5/64 x 5/8" Pin, Groove, 3/16 x 3/8" Pin, Input, Coupling Pin, Outer Cover: S7 Only All Others Plate, Caution Plate, Cover Plate, Thrust Bearing (See Item #90 for LPG Trim) 54 Plug, Pipe: 55 Plug, Pipe: /8" NPT, Standard /8" NPT, NACE /4" NPT, Standard /4" NPT, Standard /4" NPT, NACE " NPT, Standard Plug, Pipe, 1/2" NPT: Standard NACE Plug, Temperature Well (Previous Design) Retainer, Ball (Not Used With LPG Trim) Ring, Snap Screw, Adapter, #6-32 x 5/16" Screw, Adapter to Cover, Drilled Screw, Base Plate, #10-32 x 7/8" Screw, Cap; Body to Housing: S1, S3, S5 Standard, 3/4-10 x 2" S1, S3, S5 NACE S6, S7 Standard, 3/4-10 x 2-1/2" Screw, Cap; Cover to Housing: S6 Only, 1-8 x 6" S1, S3, S5, 3/4-10 x 3" P Screw, Cover Plate, #10-32 x 3/8" Screw, Drive, Caution Plate Bulletin PO01010 Issue/Rev. 0.2 (1/18) 5
6 Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 67 Screw, Gear Housing, 5/16-18 x 5/8" Screw, Knob Cover, #10-24 x 3/4", Drilled Screw, Packing Gland: S1, #10-32 x 1/2" S3, S5, 5/16-18 x 1-1/4" S6, S7, 7/16-14 x 1-1/2" * Screw, Set, #10-32 x 1/4" Screw, Temperature Well Seal, Lead and Wire Shaft, Calibrator Drive Gear Shaft, Jack-Upper Shaft, Link Assembly Pin, Groove, 1/8 x 1" Stem Assembly, Adjusting Ball Plate, Base Plate, Retainer Spring, Knob Stem, Adjusting Stud, S7 Only, 1-1/4-8 x 9-1/2" Stud, Gear Shaft Tube, Oil Washer Washer Washer, Pinion Shaft Washer, Jackshaft Washer, Thrust - Jackshaft, LPG Only Bulletin PO01010 Issue/Rev. 0.2 (1/18)
7 Internal Mechanism Item Description Quantity Part Number 91 Block: Standard Hi-Viscosity - For 2,000 SSU to 10,000 SSU Body Coupling, Drive Cover, Inner: Standard and All Iron LPG Bushing, Jackshaft: Standard and All Iron LPG Dowel, Locating Arm Lug, Lift Nut, Stem, 7/16" Nut, Inner Cover Pin, Groove, 1/4 x 1" Pin, Roll, Stem, 5/32 x 1" Pin, Roll, Drive Coupling, 5/64 x 5/8" Pilot Plate, Shaft Cover Ring, Retaining Rotor and Blade Assembly: Standard All Iron LPG Arm, Locating Bar, Adjusting Bearing, Lower Rotor: Standard and All Iron LPG Bearing, Upper Rotor: Standard and All Iron LPG Bearing, Thrust: Standard and All Iron LPG Blade, Lower: Standard All Iron LPG Std. - Modified for 2,000 SSU to 10,000 SSU Std. - Modified for 200 F Max Std. - Modified for 2,000 SSU to 10,000 SSU and 200 F Max A.I. - Modified for 2,000 SSU to 10,000 SSU Bulletin PO01010 Issue/Rev. 0.2 (1/18) 7
8 Internal Mechanism Item Description Quantity Part Number Bearing, Blade: Standard and All Current Design Previous Design Current Design Previous Design Bushing (Previous Design Bearing Only) Pin, Cotter, 3/32 x 1" Shaft, Bearing Spacer (Current Design Bearing Only) Blade, Upper: Standard All Iron LPG Std. - Modified for 2,000 SSU to 10,000 SSU Std. - Modified for 200 F Max Std. - Modified for 2,000 SSU to 10,000 SSU and 200 F Max A.I. - Modified for 2,000 SSU to 10,000 SSU Bearing, Blade: Standard and All Current Design Previous Design Current Design Previous Design Bushing (Previous Design Bearing Only) Pin, Cotter, 3/32 x 1" Shaft, Bearing Spacer (Current Design Bearing Only) Clamp, Rotor Cover Roller Collar, Adjusting Pin, Adjusting Collar Key, Locating Arm Pin, Rotor Cover Roller Plate, Rotor Bearing Plate, Rotor Gear Roller R Rotor: Standard Hi-Viscosity - For 2,000 SSU to 10,000 SSU * Dowel Bulletin PO01010 Issue/Rev. 0.2 (1/18)
9 Internal Mechanism Item Description Quantity Part Number 134 Screw, Cap, 5/16-18 x 1-1/2": Standard and LPG All Iron R Sleeve, Rotor (Not sold as a separate component - included with Item 132) Screw, Locating Arm, 5/16-24 x 1-1/4" Screw, Rotor Gear Plate, 5/16-18 x 1" Shaft and Cam Assembly Cam Key, Cam and Shaft Shaft Screw, Cap-Block, 1/2-13 x 1-1/2" Screw, Cap-Inner Cover, 5/16-18 x 2" Screw, Inner Cover, 1/4-20 x 1/2" Screw, Inner Cover to Body, 3/8-16 x 1-1/4" Screw, Lower Bearing Plate, 5/16-18 x 3/4" Screw, Nylock, 1/2-13 x 1-1/2" Screw, Pitot, #10-32 x 1/4" Shaft, Jack and Gear Stem, Rotor Adjusting Washer Washer Washer, Shakeproof Inner Mechanism General Assemblies Standard All Iron LPG Low Flow Recommended stock * Not illustrated R Indicates change since last When ordering, include temperature range, specific API gravity and API table Only standard gearing listed. For additional gearing combinations, see Gear Train Bulletin See for Form No. PO01042 for Use of current design bearing eliminates the need to use bushing (item 114, 120) which was required with the previous design bearing; however, it requires the use of a spacer (item 117, 123) on the side of and between the Item 146 screw and item 151 washer were incorporated into the meter in These items are not included in meters manufactured prior to Bulletin PO01010 Issue/Rev. 0.2 (1/18) 9
10 The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at and click on the Contact Us link in the left-hand column. TechnipFMC.com TechnipFMC 2018 All rights reserved. PO01010 Issue/Rev. 0.2 (1/18) TechnipFMC FMC Technologies Measurement Solutions, Inc. 500 North Sam Houston Parkway West, Suite 100 Houston, Texas USA P: USA Operation 1602 Wagner Avenue Erie, Pennsylvania USA P: Germany Operation Smith Meter GmbH Regentstrasse Ellerbek, Germany P:
SERVICE PARTS LIST DEEP CUT BANDSAW D51C BULLETIN NO CATALOG NO SEE PAGE 3 FOR FASTENER TORQUE CHART
= Part number change from previous service parts list. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS DEEP CUT BANDSAW CATALOG NO. 232-20 SERVICE PARTS LIST STARTING SERIAL NO. D5C REVISED BULLETIN
More informationSeries A-C Single Stage Double Suction Large Split Case. TECHNICAL Brochure BAC9100
Series A-C 9100 Single Stage Double Suction Large Split Case TECHNICAL Brochure BAC9100 TABLE OF CONTENTS Useful Pump Formulas 2 Pump Engineering Data 3 Materials of Construction 4 Exploded View 6 USEFUL
More informationMODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
More informationSeries Sump and Sewage Systems
Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column
More informationSuffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White
Wet-R-Dri Valve A TA STYLE LIGHTWEIGHT COMPACT VERSATILE B I.D. Size Standard Model Detent Model Standard Material Max. Working Body Disc Pressure WD00 AL B. WD0 AL B. Aluminum WD00 GI B. WD0 GI B. Grey
More informationPO Box 1200 Phone (205) Commerce Drive Fax (205) Winfield, Alabama PARTS MANUAL.
PO Box 100 Phone (05)87-0 05 Commerce Drive Fax (05)87-05 Winfield, Alabama 559 XB PARTS MANUAL www.kingkutter.com CONTENTS Page Middle Buster/ Sub Soiler -------------------------------------------------------
More informationMade in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Corporation 3245 S. Hattie Oklahoma City, Oklahoma 73129 Telephone: (405) 677-3321 Fax: (405) 677-3917 Email:Balon@balon.com
More informationVALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
More information4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: HS1736B, HS1742B, HS1836B, HS1842B, HS2036K, HS2042K HOME SERIES ZERO TURN MOWER SECTION: 85
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: HSB, HSB, HSB, HSB, HS0K, HS0K HOME SERIES ZERO TURN MOWER SECTION: 0 Griffin Ave. Selma, AL 0 () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com OCTOBER,00
More informationHT210 HAY TEDDER PARTS MANUAL SECTION 16
HT210 HAY TEDDER Published 04/11 PARTS MANUAL SECTION 16 MATERIAL HANDLING PARTS MANUAL PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing
More informationPN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
More informationPRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationPIPE OUTSIDE DIAMETER GUIDE
August 17, 2017-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE
More informationOperating Instructions
Operating Instructions A-2600 SERIES AWWA SWING CHECK VALVE 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com! WARNING! 1. Read and follow all pertinent instructions carefully. Proper
More informationCATALOG C-FPV-0509 AHEAD OF THE FLOW. Fire Protection Valves
CATALOG C-FPV-0509 AHEAD OF THE FLOW Fire Protection Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
More informationBEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103
CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 -PERFORMANCE CURVES Performance Curve Best One 200 Performance
More informationAR = Use as required, Qty = Quantity, Pkg. = Package, LBS = Pounds
The use of this Parts Catalog and the arrangement of information herein is explained in the General Information Section as intered below. 1954 CHEVROLET CORVETTE Abbreviations INF-1 RPO Codes Index INF-2
More informationGoulds Two Stage, Horizontally Split Case Pump
Goulds 3316 Two Stage, Horizontally Split Case Pump 3316 Two Stage, Horizontally Split Case Pumps designed for boiler feed, mine dewatering and other applications requiring moderately high heads with a
More information88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
More informationBolted Three Piece Forged Steel TRUNNION BALL VALVE
Bolted Three Piece Forged Steel TRUNNION BA VAV Trunnion Valve Features: Forged -piece construction Fire safe design ouble block and bleed design C.S. trim with mil NC ISO mounting pads Sealant injection
More informationOWNER'S MANUAL. Drum Handling Solutions DRUM CARRIER / ROTATOR SERIES DCR-205
VESTIL MANUFACTURING CORPORATION 999 North Wayne St., Angola, IN 70 Phone (0) -78 Fax (0) -9 E-mail: sales@vestil.com www.vestil.com Drum Handling Solutions Contents Warnings and Safety Instructions...
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Vertical
More informationLIQUID-SPECIFIC PRODUCT LINE: ABRASIVE LIQUID PUMPS SERIES DESCRIPTION OPERATING RANGE: IMPROVEMENTS NOMINAL FLOW RATES:
SERIES 4624B (Cast Iron - Replaces Series 4625 Models) Page 410.1 Issue K SERIES DESCRIPTION The Abrasive Liquid Series heavy duty internal gear pumps utilize hard parts in key wear areas, combined with
More information87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
More informationBaumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
More informationCONTACT US OUR SERVICES OUR PRODUCTS QUALITY CERTIFICATIONS EN9120/AS9100, SC21 BRONZE AWARD
ALA is an innovative provider of Supply Chain Solutions for C-class components, indirect materials and a variety of aerospace specific parts to the Airframe, Engine Systems and MRO of both Commercial and
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Horizontal Centrifugal Water Pumps C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11931 - Horizontal Centrifugal Water Pumps C O N T E N T S PART 1 - GENERAL... 1 1.01 PUMP - GENERAL... 1 1.02 CERTIFIED PUMP CURVES... 1 1.03 NPSH REQUIREMENTS...
More informationCarbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
More informationEngineering Data Pack HD Industrial Duty Pumps
Engineering Data Pack HD Industrial Duty Pumps Version. Excellence at work. Excellence in life. Table of Contents 0A Pump Mounting Dimensions 0A Pump Mounting Dimensions with Flanged Ports Flanged Port
More informationSmart Solutions. Powerful Products. PBV. Cast Oilpatch Floating Ball Valves
Smart Solutions. Powerful Products. PBV Cast Oilpatch Floating Ball Valves Contents PBV Cast Oilpatch Floating Ball Valves Series PA / PAH Standard Features & Dimensional Data... 2 Parts, Materials & Engineering
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationPARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
More informationBerliss Companies 644 Route 10 P.O. Box 45 Livingston, NJ Phone: (973) Fax: (973)
Berliss Companies 644 Route 10 P.O. Box 45 Livingston, NJ 07039 Phone: (973) 992-4242 Fax: (973) 992-6669 www.berliss.com Capabilities Catalog 2008-2009 Thinking Custom? Think Berliss. Berliss is an industry
More information87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
More informationANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
More informationPBV Ball Valves. Severe Service Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
PBV Ball Valves Severe Service Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 56-59-400 WWW.DKAMANS.COM Manufacturer of Quality Valve Products Around the Globe At Forum Energy Technologies
More informationApplied Maintenance Supplies & Solutions
Applied Maintenance Supplies & Solutions SM Inventory Management, Vending and More Applied Maintenance Supplies & Solutions (Applied MSS SM) brings lean principles to your management of MRO consumables
More informationGMV Super Star. Part List
GMV Super Star Part List 25 Table of Contents Part List 25 Magazine... 28 Target Retainer... 30 Throwing Table... 31 Main Frame... 32 Turntable... 33 Base... 34 Elevator... 35 Throwing Arm... 36 Motor...
More informationInstruction Manual HK285. Note: The Owner/Operator must read carefully and understand all the information presented here before operation.
Instruction Manual HK285 Note: The Owner/Operator must read carefully and understand all the information presented here before operation. Contents Warnings and Safety Instructions 1 Receiving Instructions
More informationFisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
More informationDISTRIBUTED VALVES. DEMCO Gate Valves DEMCO
Gate Valves 2 TABLE OF CONTENTS Gate Valves Introduction... 4 Series DM Gate Valves... 5 Series DM 7500 Gate Valves... 7 Series DT/DB Gate Valves... 9 PRODUCT SPECIFICATIONS General Technical Information...
More informationSAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications : Ductile iron disc All positions Low
More information8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84
L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL and BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING
More informationModel and 2 Heavy-Duty Regulator. Regulator Features: Regulator Specifications:
Model 5600 1 and 2 Heavy-Duty Regulator The Model 5600 is a spring-loaded, self-operated pressure regulator, available in 1 and 2 sizes and built to withstand the most difficult processes and environments.
More information1200 Portable Carpet Extractor Extractor Portátil de Alfombras
ENGLISH - ESPAÑOL 100 Portable Carpet Extractor Extractor Portátil de Alfombras Operator and Parts Manual Manual del Operador y Piezas TENNANT COMPANY Commercial Products RANSOM STREET HOLLAND MI 9 U.S.A.
More informationKTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationSINGLE STAGE END SUCTION PUMPS AURORA Series. Distributed By: Model 3804
Model 3804 AURORA 3800 Series SINGLE STAGE END SUCTION PUMPS Distributed By: Flow-Tech Industries 4601 South Pinemont, Suite 100 Houston, Texas 77041 Phone: 713.690.7474 Fax: 409.882.0254 sales@flow-tech.com
More informationINSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER
INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER I. SAMPLER SUSPENDED BY CABLE The Vortox Liquid Sampler is a precision instrument manufactured of stainless steel, easy to install,
More informationDuplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300
More informationSECTION ALUMINUM GATES
P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,
More informationSection 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
More informationW ARR A NTY FAIRBANKS NIJHUIS 1600 SERIES SINGLE STAGE END SUCTION PUMPS. Certified to NSF/ANSI 372.
W ST IND TRY FIR US ARR A NTY FAIRBANKS NIJHUIS 1600 SERIES SINGLE STAGE END SUCTION PUMPS Certified to NSF/ANSI 372 www.fairbanksnijhuis.com FAIRBANKS NIJHUIS 1600 SERIES Single Stage End Suction Pumps
More informationButterfly Valves - Figure 611 & 612
F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features
More informationConsolidated* Electromatic* Ball Valves
GE Oil & Gas Technical Specifications 05/2012 3500 Series Consolidated* Electromatic* Ball Valves Provides automatic or manual overpressure startup for steam boiler systems and assists startup and shutdown
More informationStandards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
More information289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
More informationCharmilles. Description. Air filter for generator. 373x497x20mm. Air filter for generator. 210x275x20mm. Air filter for generator.
Air filter 100992004 Air filter for generator 373x497x20mm 108732900 Air filter for generator 210x275x20mm RFI 500. 510 108626140 Air filter for generator 315x450x20mm RFI 040. 300. 310. 500. 510 108626260
More informationImmersion Assembly for ph and Redox Sensors DipFit P CPA 140
Technical Information TI 178C/07/en No. 5008898 Immersion Assembly for ph and Redox Sensors DipFit P CPA 10 Immersion assembly with flange connection for demanding processes. Sensor holder with bayonet
More informationBaumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
More informationCompact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High
More informationBSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTYPE r PARTS LIST
/0/0 09 9 -- /0/0 TYPE --- 0 9 All repairs, adjustments and maintenance not described in the Operator s Manual must be performed by qualified service personnel. MAC CAT 9 9 0 0 0 9 it--oil Check Valve
More informationSECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
More information289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
More informationFIXTURE CARRIERS TABLE OF CONTENTS S-WD-FC
TABLE OF CONTENTS Pictorial Index Product Recommendations Water Closet Carriers Matching Water Closet & Carrier Closet Carrier Selection & Battery Set-Up Stud & Nipple Adjustment to Finished Wall Anchoring
More informationBOILER INSTALLATION INSTRUCTIONS FOR RU 1S / BRU 1 RU 2S / BRU 2 RU 3S
BOILER INSTALLATION INSTRUCTIONS FOR RU 1S / BRU 1 RU 2S / BRU 2 RU 3S ASSEMBLY INSTRUCTIONS General Instructions: The STREBEL RU boilers are special boilers for oil or gas-fired (forced) burners. They
More information289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
More informationUNIVERSAL SEAL SERIES
INTERNAL GEAR PUMP UNIVERSAL SEAL SERIES SEALING OPTIONS APPLICATION FLEXIBILITY CONSTRUCTION OPTIONS YEAR WARRANTY Capacity Pressure Viscosity Temperature to 1,00 GPM ( m/h) 8 to,000,000 SSU (1 to 0,000
More informationLOAD BEARING ROLLER ASSEMBLIES Engineering Data Installation Notes
Installation Notes INSTALLING STUD TYPE LOAD BEARING ROLLER ASSEMBLIES Mounting holes should be machined to the nominal stud size within +.001/-.000 (+.025mm / -.000mm) tolerance. When properly aligned,
More informationUSER S OPERATING AND INSTRUCTION MANUAL
Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 2005 VARIABLE SLICE THICKNESS BREAD SLICER 2005S20000-CV INDEX Section Description Document No. Page No. SAFETY INSTRUCTIONS
More informationARI-STEVI 440 / 441 (DN15-250) Control valve - straight through With pneumatic and electric actuators
ARI-STEVI 4 / 441 (DN15-0) Control valve - straight through With pneumatic and electric actuators ARI-STEVI 4 / 441 Pneumatic actuator ARI-DP 32-34 Tri Reversible pneumatic actuator Actuator with rolling
More informationNUFLO Liquid Turbine Flow Meters
TECHNICAL SPECIFICATIONS NUFLO Liquid Turbine Flow Meters Accurate Flow Measurement In 957, this flow meter was developed with a tungsten-carbide shaft and bearing to withstand the rugged conditions of
More informationVERTICAL TURBINE PUMPS
VERTICAL TURBINE PUMPS for the PETROLEUM INDUSTRY www.nationalpumpcompany.com API-610 Vertical Pumps Vertical turbine pumps that meet or exceed API 610 requirements. Since 1969, National Pump Company has
More informationHWX. API OH3 Pump Bearing Frame. API OH4 Rigidly Coupled. API OH5 Close Coupled. API 610 Vertical In-Line Process Pumps.
API 6 Vertical In-Line Process Pumps API OH3 Pump Bearing Frame API OH4 Rigidly Coupled API OH5 Close Coupled Bulletin PS--27 (E) Pump Supplier To The World Flowserve is the driving force in the global
More informationTECHNICAL HANDBOOK. ASME B73.1 Process Pump. Wilfley Sealing Technology. No Flush Water Required
TECHNICAL HANDBOOK ASME B3. Process Pump A Wilfley Sealing Technology No Flush Water Required WILFLEY SEALING TECHNOLOGY Wilfley invented the Dynamic Expeller Seal almost a century ago and has continued
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More informationSECTION MECHANICAL SPECIFICATION GRIT COLLECTION EQUIPMENT
SECTION 11322 MECHANICAL SPECIFICATION GRIT COLLECTION EQUIPMENT PART 1 GENERAL 1.01 SCOPE There shall be furnished ( ) Grit Separator Mechanism(s) suitable for installation in (a) concrete tank(s) -ft.
More informationbrands you trust. STOCKHAM - Iron Valves Copyright 2013 CRANE ChemPharma & Energy
brands you trust. STOCKHAM - Iron Valves Copyright 0 CRANE ChemPharma & Energy Key Features & Applications Key Features & enefits Fully rated to ASME and MSS-SP Standards Full Pressure Class Offering:
More informationProducing mechanical assemblies
Unit 006 Producing mechanical assemblies Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a broad range
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationD I S T R I B U T E D V A L V E S. TECHNO Multi-Purpose Check Valves for Industry TECHNO
TM TECHNO Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED
More informationModel EVMS Vertical Multistage Pumps for the Global Market
New Products & New Techniques Model EVMS Vertical Multistage Pumps for the Global Market Hiroyuki KAWASAKI*, and So KUROIWA* Abstract As key products for the global market, new model EVMS stainless vertical
More informationIntroduction. Ultra Reliable
Introduction Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump constructed
More informationBULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
More informationRTM ACCESSORIES. MOLD SEALS ( Packing : 25LM Rolls ) Standard Dynamic Seal White. Medium Dynamic Seal Blue. Primary seal for Hollow Dynamic Seal
MOLD SEALS ( Packing : 25LM Rolls ) Standard Dynamic Seal White Medium Dynamic Seal Blue RD421-001 Dynamic section mould. Seal for use as a resin seal in RTM or RTM light. Possibility to do the vacuum
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationGD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /
DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2
More informationFORGED STEEL VALVES. 150# # Gate Globe Check. 4Evergreen Valve
FORGED STEE VAVES 150# - 2500# Gate Globe Check 4Evergreen Valve 4E is a Texas corporation valve company which was founded in 1993 by a group of enthusiastic people with more than 20 years of serving in
More information- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
More informationCryogenic Metal Seated Butterfly Valves
Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly
More informationKLINGER Ballostar KHE: This ball valve offers more
KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of
More information