Rainscreen System. Insulation NEXT GENERATION INSULATION SOLUTION FOR RAINSCREEN CLADDING SYSTEMS. Low Energy Low Carbon Buildings
|
|
- Shannon Montgomery
- 6 years ago
- Views:
Transcription
1 Insulation CI/SfB (27.9) Rn7 M2 Third Issue March 2018 Rainscreen System NEXT GENERATION INSULATION SOLUTION FOR RAINSCREEN CLADDING SYSTEMS l Optimum performance rigid vacuum insulation panel with a declared thermal conductivity of W/m. K l Insulating performance up to five times better than commonly used insulation materials l Ideal for constructions where a lack of construction depth or space is an issue l Certified by BDA Agrément * and LABC Registered Details l Vacuum insulation panels are over 90% (by weight) recyclable l Resistant to the passage of water vapour l Ideal for new build and refurbishment l Non deleterious material Low Energy Low Carbon Buildings
2 Introduction The Problem When constructing a rainscreen wall in new build situations or upgrading the thermal performance of walls in existing buildings there may be a requirement for both low U values and the thinnest possible wall build up. For new build applications, there are increasing regulatory requirements and economic reasons to improve energy efficiency. One of the more efficient approaches is to improve the thermal performance of the building fabric whilst keeping the overall construction as thin as possible. There are already high performance insulation products available that will fulfil some of these requirements, however in certain areas, for example where the design requirements are such, a new, thinner, product is needed. In refurbishment there is arguably a greater need to keep wall build ups as thin as possible. Space is already at a premium and there may be little space for installing new rainscreen cladding for example because of the available depth of eaves overhangs and encroachment into access routes. Deeper rainscreen cladding systems could necessitate extending eaves, longer and more costly fixings, trims and accessories, and may result in greater reveal depths, reducing natural daylight. The Solution The Rainscreen System has been developed to help solve these problems. The Rainscreen System is an optimum performance next generation insulation solution from Insulation. It comprises of rigid vacuum insulation panels with a microporous core which is evacuated, encased and sealed in a thin, gas tight envelope, giving outstanding thermal conductivity, and providing the thinnest possible solution to insulation problems. The vacuum insulation panels are accompanied by premium performance rigid insulation infill strips which can be cut to fit around penetrations, brackets, reveals and where fixtures and fittings need to be installed. In retrofit applications, the Rainscreen System provides solutions for areas that previously could have remained un insulated because of insufficient space available. In new constructions the Rainscreen System can significantly enhance U values in areas that would otherwise be accepted as denigrating the overall thermal performance. With a declared thermal conductivity (λ) of W/m.K, panels provide an insulating performance that is up to five times better than commonly used insulation materials. 2
3 Typical Constructions and U-values Assumptions Because rainscreen systems are proprietary and utilise different mechanisms for attaching cladding panels to the wall structure, it is advisable to contact the Insulation Technical Service Department (see rear cover) for specific U value calculations. All calculations are performed using the method detailed in BS EN ISO 6946: 2017 / I.S. EN ISO 6946: 2007 (Building components and building elements. Thermal resistance and thermal transmittance. Calculation methods), and using the conventions set out in BR 443 (Conventions for U value calculations). Insulated Rainscreen Cladding Systems (terracotta clay tile external finish) 3 mm skim coated 12.5 mm plasterboard Non combustible substrate structural masonry wall Proprietary fixing rail fix Terracotta clay tile panels Figure 1 Insulated Rainscreen Cladding Systems on Steel Frame 3 mm skim coated 12.5 mm plasterboard Non combustible substrate calcium silicate board Proprietary fixing rail Cladding panel fix Figure 2 3
4 Typical Constructions and U-values Linear Thermal Bridging at Junctions & Point Thermal Bridging Basic Principles Linear thermal bridging describes the heat loss / gain that occurs at junctions between elements e.g. where an external wall meets the roof, or at junctions around openings in the building fabric where thermal insulation is discontinuous e.g. sills, jambs and lintels. Interruptions within the insulation by materials with poorer insulating properties can result in a thermal bridge, which can lead to problems of condensation and mould growth, especially if there is a drop in surface temperature. The heat flow at these junctions and opening locations, over and above that through the adjoining plane elements, is the linear thermal transmittance of the thermal bridge: measured in W/m.K; referred to as a psi value ; and expressed as a ψ value. The lower the ψ value, the better the performance. ψ values are taken into account in the calculation methodologies e.g. Standard Assessment Procedure (SAP) that are used to assess the operational CO 2 emissions and the fabric energy efficiency of new buildings. ψ values can comprise approved, calculated or assumed values. Existing building junction losses are not typically accounted for in whole building heat loss calculations and only the risks of surface condensation and mould growth are considered. Point thermal bridging describes the heat loss associated with penetrating insulation at discrete points. Point thermal bridging is typically used as an adjustment to a U value for an element, taking account of the number of brackets, fixings or fasteners (n) and their associated point thermal losses; these losses are measured in W/m.K; referred to as a chi value ; and expressed as a χ value. The U value of a rainscreen wall is adjusted to account for point thermal bridging by adding an adjustment to the U value based on the number of penetrations per square metre of wall (n) multiplied by the calculated point thermal transmittance (χ) for brackets penetrating the insulation layer. The χ value can be determined using 3 Dimensional numerical calculations as described in BS EN ISO 10211: 2017 (Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations). Reducing Linear & Point Thermal Bridging Heat typically flows through the easiest path. For a wall insulated with the Rainscreen System, the main linear thermal bridges are the reveals, exposed slab edges and balconies, the junctions between the walls and the roof and where the external wall and ground floor meet. In addition, point linear transmittance will occur through the rainscreen fixing system chosen, where the rainscreen supports penetrate the insulation. Whilst there are some approved details available for insulation installed to the outer face of the construction, these are largely targeted at new build constructions. However, they are also considered good practice for refurbishment. Continuity of insulation is the best approach to limiting losses from junctions or from losses associated with fixing the rainscreen façade. Failing continuity, overlap of insulation layers and use of lower conductivity materials represents a good practice approach. However, where neither option is possible, the risk of condensation will require particular consideration in determining an appropriate approach. Details and designs should be considered in the context of the building, its construction, characteristics, condition and ventilation provisions. Detailing at junctions to minimise the effects of linear thermal bridging and the associated risk of condensation or mould growth is important and there are some simple design considerations that can be adopted when insulating to help mitigate the risks and to reduce heat loss. l The reveal linear thermal bridge can be minimised either by positioning the window frame so that it overlaps the insulation, or if this is not possible, by insulating the reveal at jambs, head and sill. l Where existing windows or doors are not replaced as part of renovation works, design and detailing of the rainscreen façade should consider the potential for future window replacement works. 4
5 l One of the largest thermal bridging losses for buildings is the heat loss through junctions between balconies and the external wall / intermediate floor. Good practice for new buildings is to isolate the external balcony from the building structure using an appropriate thermal break, combined with consideration of the reinforcement material used to connect the balcony back to the main structure (e.g. stainless steel has a much lower thermal conductivity than mild steel). For existing buildings, the option to use an appropriate thermal break may not be available and the effect of heat loss from balconies through the external rainscreen façade needs careful consideration. Wrapping the external balcony in appropriate insulation can assist to reduce the effects of heat loss through this junction. l For a new build construction, where the Rainscreen System is used to sheath a frame construction at the edge of ground floors, the distance between the top surface of the floor insulation or perimeter insulation upstand, and the bottom of the wall insulation must be a minimum of 150 / 225* mm for a concrete floor and 200 mm for a suspended timber floor. The further appropriate wall insulation extends past the floor insulation, the better the thermal performance of the junction between the wall and the floor will be. For existing building junctions between walls and ground floor, good practice is to extend the insulation below ground level so that wall and floor insulation layers overlap. Best practice would be to excavate and extend appropriate external insulation below ground level by at least 300 mm below finished floor level to increase the heat flow path and reduce junction losses. l Where the Rainscreen System is used at roof level as part of a parapet detail, insulation continuity should be maintained using an appropriate insulated upstand to reduce cold bridging. A minimum 25 mm thick insulated upstand should be used around the perimeter of the roof on the internal façade of parapets. The upstand should extend a minimum of 150 mm above the roof insulation and achieve a minimum distance of 300 mm between the top of the insulation upstand and the bottom of the horizontal roof insulation. Insulation should be carried up into parapets at least as high as the flat roof insulation upstand. Where insulating as part of a rainscreen system, there are also some simple design considerations that can be adopted to reduce point thermal transmittance. l Point thermal bridges cause increased flow of heat and should be taken into consideration when designing a façade/façade system. The first priority should be to eliminate continuous conductive elements and instead use discontinuous supports to make required connections back to the structure. When the thermal bridge is a necessity, such as when the structure must penetrate uninterrupted through the insulation, look for materials with the lowest possible thermal conductivity or that allows for a reduction in the amount that the insulation is bridged. l Thermal decoupling of the sub structure from the ventilated façade can be achieved through thermal separation layers. The use of a neoprene / plastic gasket, between the helping hand bracket and the structure, can help to mitigate the effects of cold bridging. l Support system suppliers should be able to calculate the thermal value of their brackets and isolators, and ensure that the installation minimises the overall impact of thermal bridging. However, in most instances a detailed 3 Dimensional U value is required to assess the impact of the chosen design on the framing system. Please contact the Insulation Technical Service Department (see rear cover) for further information. For further advice on reducing linear and point thermal bridging, please contact the Insulation Technical Service Department (see rear cover for details). * 150 mm applies to the UK and 225 mm to the Republic of Ireland. 5
6 Design Considerations Design Service The Rainscreen System comprises three elements: panels, flex infill strips and fix fixing strips. It comes with a supporting design service which ensures the ratio of the to flex and fix for each project is maximised. The panel layout will be designed quickly and effectively, ready for client approval. Each layout will illustrate the size, number and location of the panels. It will also illustrate the size, number and location of any flex and fix strips required. For more details please contact the Insulation Technical Service Department (see rear cover). Responsible Sourcing Responsible Sourcing The Rainscreen System produced at Insulation s Pembridge manufacturing facility is certified to BES 6001 (Framework Standard for the Responsible Sourcing of Construction Products) Very Good. NB The above information is correct at the time of writing. Please confirm at the point of need by contacting Insulation s Technical Service Department (see rear cover), from which a copy of Insulation s BES 6001 certificate can be obtained. Sustainability & Responsibility Insulation has a long term commitment to sustainability and responsibility: as a manufacturer and supplier of insulation products; as an employer; as a substantial landholder; and as a key member of its neighbouring communities. A report covering the sustainability and responsibility of Insulation Ltd s operations at its Pembridge, Herefordshire and Selby, North Yorkshire manufacturing facilities is available at Specification Clause specifications as:- panels should be described in The wall insulation shall be the Rainscreen System mm thick: comprising a rigid vacuum insulation panel with a microporous core which is evacuated, encased and sealed in a thin, gas tight envelope. The product shall be manufactured under a management system certified to ISO 9001: 2008, ISO 14001: 2004, BS OHSAS 18001: 2007 and ISO 50001: 2011 and installed in accordance with the instructions issued by Insulation Limited. NBS Specifications Details also available in NBS Plus. NBS users should refer to clause(s): H (Standard and Intermediate) Cold Bridging The use of a neoprene / plastic gasket, between the helping hand bracket and the structure, will help to mitigate the effects of cold bridging. Please contact the Insulation Technical Service Department (see rear cover) for further information. Water Vapour Control / Condensation Consideration should be given to the risk of condensation, when designing thermal elements. A condensation risk analysis should be carried out following the procedures set out in BS 5250: 2011+A1: 2016 (Code of practice for control of condensation in buildings). The Insulation Technical Service Department (see rear cover) can provide this service. Fire Stops Current Building Regulations / Standards should be considered with regard to the requirements for, and provision of, fire stops. Lightning Protection Designers should give consideration to the requirements of BS / I.S. EN (Protection against lightning). 6
7 Sitework Installation l Because rainscreen cladding systems are proprietary and utilise different mechanisms for attaching cladding panels to the wall structure, installation guidance should be sought from the rainscreen cladding system manufacturer. However, in the absence of any other guidance the instructions laid out below may be followed. l The substrate against which the Rainscreen System is to be installed should be clean, dry and free from protrusions. l panels should be installed with board edges lightly butted. Remaining areas of wall, which can not be insulated with panels should be in-filled with flex. Each flex strip is to be the same thickness as the element of the Rainscreen System. l flex and fix should be cut neatly around fixings and brackets to avoid gaps. l panels are to be installed with the film flaps against the substrate and should be restrained to the substrate using a suitable proprietary adhesive. For further guidance on the specification of the proprietary adhesive please consult the Insulation Technical Service Department (see rear cover) for assistance, or refer to: Sika Limited (0) Fixfast Limited (0) l The adhesive specification, and fixing rate, will potentially vary with the geographical location of the building, the local topography, the height and width of the wall structure, and the type of mechanisms being used to attach the cladding system. l flex and fix should be restrained using mechanical fixings. l fix strips should utilise a single row of insulation fasteners (with a suitable head or washer plate) along the centre line of the strip. Fixings within the row should be evenly distributed along the strip and located at centres no greater than 1200 mm, with a fixing located within 150 mm of each end of the strip. The requirement for additional fixings would need to be assessed on an individual project basis in accordance with BS EN : 2005+A1: 2010 (UK National Annex to Eurocode 1. Actions on structures. General actions. Wind actions). l Mechanical fixings for flex should be located greater than 50 mm, but less than 150 mm from the strip edge. l Joints of the panels, and at junctions between the, flex and fix, should be taped using a minimum 75 mm wide self adhesive aluminium foil rainscreen cladding tape. In the absence of other protection, exposed edges of the flex and fix should be protected by a self adhesive aluminium foil tape, with a minimum 50 mm wide overlap onto the insulation board face. l For further guidance on the specification of self adhesive tape and application guidance, please refer to: Sika Limited +44 (0) Venture Tape Europe +44 (0)
8 Sitework General l panels should not be used in association with solvent based adhesive systems. l panels should not be exposed to naked flames or excessive heat. Cutting l panels should not be cut or penetrated. The substrate must be clean, dry and level, and free of sharp objects or edges. l Cutting of flex and fix strips should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. l Ensure accurate trimming of flex and fix to achieve close butting joints and continuity of insulation. Daily Working Practice l At the completion of each day s work, or whenever work is interrupted for extended periods of time, board edges and joints should be protected from inclement weather. Availability l Please contact Insulation s Customer Service Department for availability of the Rainscreen System (see rear cover). Packaging and Storage l The packaging of the Rainscreen System should not be considered adequate for outdoor protection. The Rainscreen System should be stored inside a building and raised off the floor. Health and Safety l Insulation products are chemically inert and safe to use. l A Safety Information Data Sheet for this product is available from the Insulation website or Warning do not stand on or otherwise support your weight on this product unless it is fully supported by a load bearing surface. Please note that the reflective surfaces on this product are designed to enhance its thermal performance. As such, they will reflect light as well as heat, including ultraviolet light. Therefore, if this product is being installed during very bright or sunny weather, it is advisable to wear UV protective sunglasses or goggles, and if the skin is exposed for a significant period of time, to protect the bare skin with a UV block sun cream. 8
9 Product Details Composition panels comprise a rigid vacuum insulation panel with a microporous core which is evacuated, encased and sealed in a thin, gas tight envelope. flex and fix strips comprise a premium performance rigid insulation faced on both sides with a composite foil facing. Standards & Approvals The Rainscreen System is manufactured to the highest standards under a management system certified to ISO 9001: 2008 (Quality Management Systems. Requirements), ISO 14001: 2004 (Environmental Management Systems. Requirements with guidance for use), BS OHSAS 18001: 2007 (Occupational Health and Safety Management Systems. Requirements) and ISO 50001: 2011 (Energy Management Systems. Requirements with guidance for use). The use of the Rainscreen System is covered by BDA Agrément Certificate BAE /02/A (thicknesses of mm) and by LABC Registered Details Certificate No. EWW488. For more information please contact the Insulation Technical Services Department (see rear cover). BDA Agrément BAE /02/A Standard Dimensions standard size(s): panels are available in the following Nominal Dimension Availability Length (mm) Width (mm) Insulant Thickness (mm) Other sizes may be available dependent on order quantity. Please contact Insulation s Customer Service Department for more details (see rear cover). Compressive Strength The compressive strength of panels typically exceeds 150 kpa at 10% compression when tested to BS / I.S. EN ISO 826: 2013 (Thermal insulating products for building applications. Determination of compression behaviour). Durability Certificate No: EWW488 If installed correctly and protected from damage and penetration, the Rainscreen System can provide reliable long term thermal performance over the lifetime of the building. Resistance to Solvents, Fungi & Rodents The Rainscreen System should not be used in association with solvent-based adhesive systems. Damaged boards or boards that have been in contact with solvents or acids should not be used. The insulation core and facings used in the manufacture of the Rainscreen System resist attack by mould and microbial growth, and do not provide any food value to vermin. Fire Performance The Rainscreen System can be used in multi storey buildings below 18 metres in height. For buildings with a habitable storey 18 metres, or greater, above ground level, Kooltherm K15 Rainscreen Board may be used. Details on the fire performance of Insulation products may be obtained from the Insulation Technical Service Department (see rear cover). Thermal Properties The λ values and R values detailed below are quoted in accordance with BS / I.S. EN 12667: 2001 (Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance), with allowance for ageing and edge effect of the encapsulating film to form the declared value. Thermal Conductivity panels achieve a declared thermal conductivity (λ value) of W/m. K. Thermal Resistance Thermal resistance (R value) of panels varies with thickness and is calculated by dividing the thickness of the panel (expressed in metres) by the thermal conductivity. The resulting number is rounded down to the nearest 0.05 (m 2. K/W). Insulant Thickness Thermal Resistance (mm) (m 2. K/W) NB Please contact Insulation s Customer Service Department for current stock and non stock sizes (see rear cover). 9
10 Contact Details Customer Service For quotations, order placement and details of despatches please contact the Insulation Customer Service Department on the numbers below: UK Tel: +44 (0) Fax: +44 (0) Ireland Tel: +353 (0) Fax: +353 (0) Literature & Samples Insulation produces a comprehensive range of technical literature for specifiers, contractors, stockists and end users. The literature contains clear user friendly advice on typical design; design considerations; thermal properties; sitework and product data. For copies please contact the Insulation Marketing Department, or visit the Insulation website, using the details below: UK Tel: +44 (0) Fax: +44 (0) literature@kingspaninsulation.co.uk Ireland Tel: +353 (0) Fax: +353 (0) info@kingspaninsulation.ie Tapered Roofing For technical guidance, quotations, order placement and details of despatches please contact the Insulation Tapered Roofing Department on the numbers below: UK Tel: +44 (0) Fax: +44 (0) tapered@kingspaninsulation.co.uk Ireland Tel: +353 (0) Fax: +353 (0) tapered@kingspaninsulation.ie Technical Advice / Design Insulation supports all of its products with a comprehensive Technical Advisory Service. Calculations can be carried out to provide U values, condensation / dew point risk, required insulation thicknesses etc U value calculations can also be carried out on the Insulation U value Calculator, available for free online at or downloaded as an App. The Insulation Technical Service Department can also give general application advice and advice on design detailing and fixing etc... Site surveys are also undertaken as appropriate. The Insulation British Technical Service Department operates under a management system certified to the BBA Scheme for Assessing the Competency of Persons to Undertake U value CERTIFICATE CS/ U Value Competency Scheme and Condensation Risk Calculations. Please contact the Insulation Technical Service Department on the numbers below: UK Tel: +44 (0) Fax: +44 (0) technical@kingspaninsulation.co.uk Ireland Tel: +353 (0) Fax: +353 (0) technical@kingspaninsulation.ie General Enquiries For all other enquiries contact Insulation on the numbers below: UK Tel: +44 (0) Fax: +44 (0) info@kingspaninsulation.co.uk Ireland Tel: +353 (0) Fax: +353 (0) info@kingspaninsulation.ie Insulation Ltd. reserves the right to amend product specifications without prior notice. Product thicknesses shown in this document should not be taken as being available ex stock and reference should be made to the current Insulation price list or advice sought from Insulation s Customer Service Department (see above left). The information, technical details and fixing instructions etc. included in this literature are given in good faith and apply to uses described. Recommendations for use should be verified for suitability and compliance with actual requirements, specifications and any applicable laws and regulations. For other applications or conditions of use, Insulation offers a Technical Advisory Service (see above), the advice of which should be sought for uses of Insulation products that are not specifically described herein. Please check that your copy of this literature is current by contacting the Insulation Marketing Department (see left). Insulation Ltd Pembridge, Leominster, Herefordshire HR6 9LA, UK Castleblayney, County Monaghan, Ireland *Certified for thicknesses of mm, OPTIM-R, Kooltherm and the Lion Device are Registered Trademarks of the Group plc in the UK, Ireland and other countries. All rights reserved. Registered in England & Wales, No Registered Office: Pembridge, Leominster, Herefordshire HR6 9LA UK. VAT GB Registered in Ireland, No Registered Office: Bree Industrial Estate, Castleblayney, Co. Monaghan, Ireland. VAT IE I.
Rainscreen System. Insulation NEXT GENERATION INSULATION SOLUTION FOR RAINSCREEN CLADDING SYSTEMS. Low Energy Low Carbon Buildings
Insulation CI/Sfb (27.9) Rn7 M2 Second Issue June 2015 Rainscreen System NEXT GENERATION INSULATION SOLUTION FOR RAINSCREEN CLADDING SYSTEMS Optimum performance rigid vacuum insulation panel aged design
Balcony & Terrace System
I n s u l a t i o n First Issue (b) July 2013 Balcony & Terrace System NEXT GENERATION INSULATION SOLUTION FOR BALCONIES AND TERRACES Optimum performance rigid vacuum insulation panel aged design value
Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB. (45) Rn7 M2 Fifth Issue May 2018
Insulation CI/SfB (45) Rn7 M2 Fifth Issue May 2018 K10 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivities as low
Flooring System. I n s u l a t i o n NEXT GENERATION INSULATION SOLUTION FOR FLOORS. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Second Issue June 2015 System NEXT GENERATION INSULATION SOLUTION FOR FLOORS Optimum performance rigid vacuum insulation panel aged design value thermal conductivity
Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB. (45) Rn7 M2 Second Issue October 2016
Insulation CI/SfB (45) Rn7 M2 Second Issue October 2016 K110 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivity of
Dormer System. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n First Issue July 2013 Dormer System NEXT GENERATION INSULATION SOLUTION FOR DORMERS Optimum performance rigid vacuum insulation panel aged design value thermal conductivity 0.007 W/m.
External Wall System. Insulation NEXT GENERATION INSULATION SOLUTION FOR EXTERNAL MASONRY WALLS. Low Energy Low Carbon Buildings
Insulation CI/SfB (27.9) Rn7 M2 Third Issue March 2018 External Wall System NEXT GENERATION INSULATION SOLUTION FOR EXTERNAL MASONRY WALLS l Optimum performance rigid vacuum insulation panel with a declared
K10 Soffit Board. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Eleventh Issue October 2011 K10 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Premium performance rigid thermoset insulation thermal conductivities
K10 FM Soffit Board. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (23.9) Rn7 M2 Twelfth Issue (b) June 2012 K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Premium performance rigid thermoset insulation thermal conductivities
K110 Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB
Insulation CI/SfB (45) Rn7 M2 Second Issue October 2016 K110 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivity of
Roofing System. Insulation INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY AND COLD LIQUID APPLIED WATERPROOFING
Insulation CI/Sfb (27.9) Rn7 M2 Second Issue November 2018 INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY AND COLD LIQUID APPLIED WATERPROOFING l Optimum performance vacuum insulation
K15 Rainscreen Board. Insulation INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS
Insulation A4/6 K15 AW2161 Issue 3 Dec 2016 INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Suitable
K110 FM Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB
Insulation CI/SfB (45) Rn7 M2 Third Issue October 2017 K110 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivity of
K10 FM Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB
Insulation CI/SfB (45) Rn7 M2 Thirteenth Issue May 2018 K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivities
Insulation. First Issue December Kingspan Insulation TECHNICAL SERVICES. Low Energy Low Carbon Buildings
Insulation First Issue December 2015 Kingspan Insulation TECHNICAL SERVICES Low Energy Low Carbon Buildings The Technical Service from Kingspan Insulation Kingspan Insulation offers professional, expert
Insulation for Ventilated Rainscreen Cladding Systems
I n s u l a t i o n Third Issue September 2010 Insulation for Ventilated Rainscreen Cladding Systems COMPLIANCE WITH APPROVED DOCUMENT B2 Low Energy - Low Carbon Buildings Insulation for Ventilated Rainscreen
K108 Cavity Board. Insulation PARTIAL FILL CAVITY WALL INSULATION. Low Energy Low Carbon Buildings. CI/SfB. (21.9) Rn7 M2 Third Issue October 2017
Insulation CI/SfB (21.9) Rn7 M2 Third Issue October 2017 Board PARTIAL FILL CAVITY WALL INSULATION l Premium performance rigid thermoset phenolic insulation thermal conductivity of 0.018 W/m.K l Clear
Taking the Devil out of the Detail?
Insulation First Issue March 2017 Taking the Devil out of the Detail? AN EVALUATION OF ψ VALUES FOR KINGSPAN KOOLTHERM CAVITY CLOSER Low Energy Low Carbon Buildings Contents Page Executive Summary 3 Background
Heavy Duty Floors. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (13.9) Rn7 M2 Seventh Issue March 2011 Heavy Duty Floors INSULATION FOR HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING High performance rigid extruded polystyrene
TW53. Insulation EXTERNAL INSULATION FOR MASONRY WALLS. Low Energy Low Carbon Buildings. CI/SfB. (21.9) Rn7 M2 Seventh Issue May 2018
Insulation CI/SfB (21.9) Rn7 M2 Seventh Issue May 2018 EXTERNAL INSULATION FOR MASONRY WALLS l High performance rigid thermoset insulation thermal conductivities as low as 0.025 W/m.K l Suitable for use
TW50. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Seventh Issue March 2011 PARTIAL FILL CAVITY WALL INSULATION High performance rigid thermoset insulation thermal conductivity 0.022 W/m.K Clear cavity is maintained
K12 Framing Board. Insulation INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS
Insulation A4/8 K12 AW2194 Issue 10 Sep 2017 INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Can
K15 Cladding Board. Insulation INSULATION FOR USE BEHIND CLADDING SYSTEMS. Low Energy Low Carbon Buildings. Third Issue July 2017
Insulation Third Issue July 2017 See rear cover for applicable countries K15 Cladding Board INSULATION FOR USE BEHIND CLADDING SYSTEMS l Premium performance rigid thermoset insulation thermal conductivities
Car Park Decks. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Seventh Issue March 2011 Car Park Decks INSULATION FOR CAR PARK DECKS High performance rigid extruded polystyrene insulation thermal conductivities as low as 0.029
K5 External Wall Board
Insulation CI/SfB (21.9) Rn7 M2 Ninth Issue May 2018 K5 EXTERNAL INSULATION FOR MASONRY WALLS Premium performance rigid thermoset insulation thermal conductivities as low as 0.020 W/m.K Suitable for use
BREEAM 2014 UK New Construction and UK Refurbishment and Fit-Out
Insulation Seventh Issue December 2017 BREEAM 2014 UK New Construction and UK Refurbishment and Fit-Out WHAT CREDITS CAN KINGSPAN KOOLTHERM, KOOLDUCT & THERMA TM PRODUCTS ACHIEVE? Low Energy Low Carbon
K12 Framing Board. Insulation
Insulation A4/8 K12 AW2161 Issue 7 Dec 2016 INSULATION FOR USE BEHIND wall lining AND FRAMED WALLS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Can
Engineered Timber Systems AN INTRODUCTION. Low Energy Low Carbon Buildings. CI/SfB (2-) Rj7 - Thirteenth Issue September 2017
Engineered Timber Systems CI/SfB (2-) Rj7 - Thirteenth Issue September 2017 AN INTRODUCTION l Can achieve whole wall and roof U values of 0.20 0.10 W/m 2. K or better l Can achieve air leakage levels as
K12 Framing Board. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Ninth Issue March 2011 K12 INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid thermoset insulation thermal conductivities as low as 0.020
K17 Insulated Plasterboard
Insulation A4/6 K17 AW2032 Issue 10 Nov 2015 K17 Insulated Plasterboard INSULATED DRY-LINING PLASTERBOARD FOR PLASTER DAuB / ADHESIVE BONDING Super high performance rigid thermoset phenolic insulation
K103 Floorboard. Insulation INSULATION FOR FLOORS. Low Energy Low Carbon Buildings. CI/SfB. (13.9) Rn7 M2 Second Issue August 2016
Insulation CI/SfB (13.9) Rn7 M2 Second Issue August 2016 INSULATION FOR FLOORS K103 Floorboard l Premium performance rigid thermoset phenolic insulation thermal conductivity of 0.018 W/m.K l Can reduce
K5 External Wall Board
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Eighth Issue (b) March 2011 K5 EXTERNAL INSULATION FOR MASONRY WALLS Premium performance rigid thermoset insulation thermal conductivities as low as 0.020 W/m.K
K17 Insulated Plasterboard
I n s u l a t i o n CI/Sfb (21.9) Rn7 M2 Fifth Issue March 2011 K17 Insulated Plasterboard INSULATED PLASTERBOARD FOR PLASTER DAB / ADHESIVE BONDED DRY LINING Premium performance rigid thermoset insulation
K3 Floorboard. Insulation INSULATION FOR FLOORS
Insulation A4/6 K3 AW2194 Issue 6 Sep 2017 INSULATION FOR FLOORS K3 Floorboard Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Resistant to the passage
Duct Insulation. Kingspan. Insulation RIGID INSULATION FOR OUTDOOR RECTANGULAR, CIRCULAR AND FLAT OVAL HVAC DUCTWORK. Low Energy Low Carbon Buildings
Insulation CI/SfB (57.9) In7 (M2) Third Issue March 2017 Kingspan Duct Insulation RIGID INSULATION FOR OUTDOOR RECTANGULAR, CIRCULAR AND FLAT OVAL HVAC DUCTWORK Low Energy Low Carbon Buildings Kingspan
K112 Framing Board. Insulation INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS. Low Energy Low Carbon Buildings. CI/SfB
Insulation CI/SfB (21.9) Rn7 M2 First Issue April 2017 K112 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS l Premium performance rigid thermoset insulation thermal conductivity of 0.018
BREEAM 2014 UK New Construction and UK Refurbishment and Fit-Out
Insulation Fifth Issue August 2015 BREEAM 2014 UK New Construction and UK Refurbishment and Fit-Out WHAT CREDITS CAN KINGSPAN KOOLTHERM, KOOLDUCT & THERMA TM PRODUCTS ACHIEVE? Low Energy Low Carbon Buildings
Car Park Decks. Insulation INSULATION FOR CAR PARK DECKS. Low Energy Low Carbon Buildings. CI/SfB. (27.9) Rn7 M2 Eighth Issue April 2017
Insulation CI/SfB (27.9) Rn7 M2 Eighth Issue April 2017 INSULATION FOR CAR PARK DECKS Car Park Decks l High performance rigid extruded polystyrene insulation thermal conductivities as low as 0.034 W/m.K
K3 Floorboard. Insulation INSULATION FOR FLOORS
Insulation A4/6 K3 AW2385 Issue 7 Oct 2018 INSULATION FOR FLOORS K3 Floorboard Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Resistant to the passage
K10 FM Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. agent that has zero ODP and low GWP
Insulation Second Issue October 2016 See rear cover for applicable countries K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset insulation thermal conductivities
TR26 LPC/FM. Insulation INSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE PLY WATERPROOFING. CI/SfB
Insulation CI/SfB (27.9) Rn7 M2 Eighth Issue October 2017 TR26 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE PLY WATERPROOFING l High performance rigid thermoset insulation
Basements. Insulation INSULATION FOR BASEMENTS. Low Energy Low Carbon Buildings. CI/SfB. (13.9) Rn7 M2 Fourth Issue April 2017
Insulation CI/SfB (13.9) Rn7 M2 Fourth Issue April 2017 INSULATION FOR BASEMENTS Basements l High performance rigid extruded polystyrene insulation thermal conductivities as low as 0.034 W/m.K l High compressive
K15 Rainscreen Board. I n s u l a t i o n EP E R F O R M A N C. Low Energy - Low Carbon Buildings
EP E R F O R M A N C I n s u l a t i o n CI/Sfb (21.9) Rn7 M2 Eighth Issue November 2008 K15 Rainscreen Board INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS Premium performance rigid phenolic insulation
TR24. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Second Issue August 2013 TR24 INSULATION FOR FLAT ROOFS WATERPROOFED WITH PARTIALLY BONDED TORCH APPLIED MULTI LAYER BITUMINOUS WATERPROOFING High performance rigid
K11 Roofboard. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Ninth Issue March 2011 K11 Roofboard INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY BONDED TORCH APPLIED MULTI LAYER BITUMINOUS WATERPROOFING Premium performance
K17 Insulated Plasterboard
Insulation A4/6 K17 AW2089 Issue 12 Mar 2016 K17 Insulated Plasterboard INSULATED DRY-LINING PLASTERBOARD FOR ADHESIVE BONDING Super high performance rigid thermoset phenolic insulation Fibre-free, closed
CI/Sfb 2- Rj7 - Eighth Issue May 2011
Engineered Timber Systems CI/Sfb 2- Rj7 - Eighth Issue May 2011 AN INTRODUCTION Can achieve whole wall and roof U-values of 0.21-0.10 W/m 2. K or better Can achieve air leakage levels as good as approximately
wall TW50 zero ODP PARTIAL FILL CAVITY WALL INSULATION For more information on Kingspan Insulation visit
CI/Sfb (21.9) Rn7 M2 Second Issue November 2002 wall TW50 zero ODP PARTIAL FILL CAVITY WALL INSULATION High performance rigid urethane insulation thermal conductivity 0.022 W/m.K Utilises traditional cavity
K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS. P E R F O R M A N C E Manufactured to BS EN ISO 9002: 1994 Certificate No.
CI/Sfb (21.9) Rn7 M2 Fourth Issue March 2003 K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity 0.022 0.024 W/m.K Class
Platinum. I n s u l a t i o n INSULATION FOR FLOORS. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (23.9) Rn7 M2 First Issue September 2012 INSULATION FOR FLOORS High performance thermal insulation Suitable for installation in all weather conditions Suitable for use above
K8 Cavity Board. Insulation CAVITY WALL INSULATION
Insulation A4/6 K8 AW2194 Issue 13 Sep 2017 CAVITY WALL INSULATION Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Clear cavity is maintained resists
Timber-framed Walls. Insulation
Insulation A4/6 TF AW2161 Issue 2 Jan 2017 Timber-framed Walls Insulation guide Super high performance solutions Fibre-free, closed cell insulation core Easy to handle and install Resistance to the passage
K18 Insulated Plasterboard
Insulation A4/8 K18 AW2203 Issue 11 Sep 2017 K18 Insulated INSULATED DRY-LINING PLASTERBOARD FOR MECHANICAL FIXING Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation
Insulation AN INTRODUCTION. Low Energy Low Carbon Buildings. Fourth Issue August 2018
Insulation Fourth Issue August 2018 The Kingspan AN INTRODUCTION System Low Energy Low Carbon Buildings Introduction Overview Traditionally, HVAC ductwork is constructed from galvanised sheet steel, which
K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS P E R F O R M A N C E
CI/Sfb (21.9) Rn7 M2 Third Issue November 2002 K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity 0.018 W/m.K Class O fire
Light steel frame walls
Light Steel Frame Walls Light steel frame walls Solution optimiser and pathfinder Overview Light steel framing is extensively used due to its good thermal and structural behaviour. Heat loss reduction
floor TF70 Insulation INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS Low Energy Low Carbon Buildings CI/SfB
Insulation CI/SfB (13.9) Rn7 M2 Seventh Issue September 2017 floor TF70 INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS l High performance rigid thermoset insulation thermal conductivity 0.022
K8 Cavity Board. Insulation PARTIAL FILL CAVITY WALL INSULATION P E R F O R M A N C E BBA BRITISH
Insulation CI/Sfb (27.9) Rn7 M2 Eighth Issue May 2007 PARTIAL FILL CAVITY WALL INSULATION Premium performance rigid phenolic insulation thermal conductivity as low as 0.021 W/m.K Class 0 / Low Risk fire
Product Selector. Insulation INSULATION FOR ROOFS, WALLS & FLOORS. Low Energy Low Carbon Buildings. Visit our website:
Insulation CI/SfB (2 ) Rn7 M2 Eighth Issue June 2018 Product Selector INSULATION FOR ROOFS, WALLS & FLOORS Visit our website: www.kingspaninsulation.co.uk Low Energy Low Carbon Buildings Contents Page
K15 Rainscreen Board. Insulation INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS P E R F O R M A N C E
Insulation CI/Sfb (21.9) Rn7 M2 Sixth Issue June 2006 K15 Rainscreen Board INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity as low
Insulation. First Issue February Technical Note KINGSPAN KOOLDUCT DUCTWORK COMMISSIONING AND TESTING. Low Energy Low Carbon Buildings
Insulation First Issue February 2016 Technical Note KINGSPAN KOOLDUCT DUCTWORK COMMISSIONING AND TESTING Low Energy Low Carbon Buildings Contents Page Introduction 3 Important Notice 3 Ductwork Pressure
Insulation TECHNICAL DATA SHEET. Low Energy Low Carbon Buildings. CI/SfB (57.9) In7 (M2) First Issue April 2016
Insulation CI/SfB (57.9) In7 (M2) First Issue April 2016 The Kingspan TECHNICAL DATA SHEET System Low Energy Low Carbon Buildings Introduction The Kingspan KoolDuct System is an innovative lightweight
Insulation AN INTRODUCTION. Low Energy Low Carbon Buildings. Third Issue September 2017
Insulation Third Issue September 2017 The Kingspan AN INTRODUCTION System Low Energy Low Carbon Buildings Introduction Overview Traditionally, HVAC ductwork is constructed from galvanised sheet steel,
K17 Insulated Plasterboard
Insulation A4/8 K17 AW2322 Issue 16 May 2018 K17 Insulated INSULATED DRY-LINING PLASTERBOARD FOR ADHESIVE BONDING Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation
Certificate No: EWWS165
Certificate No: EWWS165 Kingspan Kooltherm K15 Rainscreen Board Description of Product Kooltherm K15 Rainscreen Board is a rigid phenolic insulation board incorporating foil composite facings. It is intended
Superior Performance Phenolic Insulation. SR/RS Insulation for Ventilated Rainscreen Cladding. Walls 10/4803
Superior Performance Phenolic Insulation Walls SR/RS Insulation for Ventilated Rainscreen Cladding 10/4803 Data Sheet SR/RS Insulation for Ventilated Rainscreen Cladding SR/RS Rainscreen Board provides
K2 Roofboard INSULATION BENEATH FULLY ADHERED SINGLE-PLY WATERPROOFING USING SOLVENT BASED ADHESIVES P E R F O R M A N C E
CI/Sfb (27.9) Rn7 M2 Fourth Issue November 2002 INSULATION BENEATH FULLY ADHERED SINGLE-PLY WATERPROOFING USING SOLVENT BASED ADHESIVES Premium performance rigid phenolic insulation thermal conductivity
Acoustics: Rain Impact Noise
Insulation CI/Sf (27.9) Rn7 P2 Fourth Issue May 2017 coustics: Rain Impact Noise Low Energy Low Carbon uildings Introduction This Technical ulletin is designed to demonstrate that the effect of rain impact
Building Regulations for the Conservation of Fuel and Power
Insulation Second Issue (b) December 2012 Building Regulations for the Conservation of Fuel and Power EXISTING DWELLINGS 2010 Health Check Low Energy Low Carbon Buildings Contents Page Introduction 3 Approved
Soffit Board. Insulation
Insulation A4/8 K10+ AW2200 Issue 4 Sep 2017 K10 Soffit Board INSULATED FIBRE CEMENT SHEET for concrete soffits Super high performance rigid thermoset phenolic insulation Non combustible building board
Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as
Insulation. Fifth Issue April Kingspan Insulation SERVICE FOR YOU. Low Energy Low Carbon Buildings
Insulation Fifth Issue April 2016 Kingspan Insulation SERVICE FOR YOU Low Energy Low Carbon Buildings Processes Introduction Kingspan Insulation prides itself on offering the highest levels of customer
PlyLok. Product Guide PIR and Plywood Laminate Insulation for Warm Flat Roofs.
PlyLok Product Guide PIR and Plywood Laminate Insulation for Warm Flat Roofs. Introduction The Company. Driven by a culture of innovation, technical competence and flair, Recticel Insulation Products is
K10 FM Soffit Board. Insulation
Insulation A4/8 K10FM AW2257B Issue 14 Dec 2017 K10 FM Soffit Board Insulation for concrete soffits Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core FM
Kingspan Kooltherm K10, K10 Plus & K15 Insulation Products
CI/SfB (29) IRISH AGRÉMENT BOARD CERTIFICATE NO. 08/0321 Kingspan Insulation, Castleblayney, Co. Monaghan, Ireland. Tel: +353 (0)42 9795000 Fax: +353 (0)42 9754299 Email: info@insulation.kingspan.com Website:
Kingspan. Insulation INSULATED CAVITY CLOSERS FOR CLOSING CAVITIES AROUND WALL OPENINGS
Insulation CI/SfB (31-9) Hn M2 Fourth Issue December 201 Kingspan & Kingspan INSULATED CAVITY CLOSERS FOR CLOSING CAVITIES AROUND WALL OPENINGS Continuous insulation maintains a continuous insulated cavity
An Independent Analysis of the Impact of Installing Internal Solid Wall Insulation in Existing Dwellings
Insulation First Issue June 2016 An Independent Analysis of the Impact of Installing Internal Solid Wall Insulation in Existing Dwellings A WHITE PAPER Low Energy Low Carbon Buildings Contents Page Executive
BREATHABLE MEMBRANE FOR UNVENTILATED PITCHED ROOFS AND TIMBER FRAME WALLS
Insulation CI/SfB (27.9) Ln6 L3 Seventh Issue September 2017 BREATHABLE MEMBRANE FOR UNVENTILATED PITCHED ROOFS AND TIMBER FRAME WALLS l Waterproof can be used as a temporary roof covering l Non tenting
Superior Performance Phenolic Insulation. SR/FB Insulation for Steel and Timber Frame. Walls AS LOW AS 10/4803
Superior Performance Phenolic Insulation Walls Insulation for Steel and Timber Frame AS LOW AS 020 10/4803 Data Sheet Insulation for Steel and Timber Frame Safe-R Framing Board is designed for use with
Superior Performance Phenolic Insulation. SR/FB Insulation for Steel and Timber Frame. Walls AS LOW AS 10/4803
Superior Performance Phenolic Insulation Walls Insulation for Steel and Timber Frame AS LOW AS 020 10/4803 Data Sheet Insulation for Steel and Timber Frame Safe-R Framing Board is designed for use with
Insulation. CI/SfB n7 (M2) First Issue January zero ODP. Kingspan. Assessed to ISO 9001: 2000 Certificate No. 035/2
Insulation CI/SfB n7 (M2) First Issue January 2005 Kingspan zero ODP Assessed to ISO 9001: 2000 Certificate No. 035/2 Kingspan zero ODP Description Kingspan Kooltherm zero ODP rigid phenolic insulation
Superior Performance PIR Insulation XO/FB. Insulaton for Steel & Timber Frame. Walls 12/4956
Superior Performance PIR Insulation Walls Insulaton for Steel & Timber Frame 021 12/4956 Data Sheet XtroLiner is a superior performance insulation with a lambda value of 0.021 Wm/K and a Euroclass C fire
Certificate No: EWWS546
Certificate No: EWWS546 Kingspan TEK Building System Description of Product Kingspan TEK Building System for use as wall and roof panels. The system is a structural insulated panel (SIP) system comprising
Superior Performance PIR Insulation. XO/FB Insulaton for Steel & Timber Frame. Walls 12/4956
Superior Performance PIR Insulation Walls Insulaton for Steel & Timber Frame 021 12/4956 Data Sheet XtroLiner Framing Board is designed for use in a wide range of construction including steel or timber
K1Roofboard INSULATION BENEATH MECHANICALLY FIXED FM APPROVED SINGLE-PLY NON-BITUMINOUS WATERPROOFING P E R F O R M A N C E
CI/Sfb (27.9) Rn7 M2 Fourth Issue November 2002 Roofboard INSULATION BENEATH MECHANICALLY FIXED FM APPROVED SINGLE-PLY NON-BITUMINOUS WATERPROOFING Premium performance rigid phenolic insulation thermal
Insulation. First Edition January Daylighting A WHITE PAPER. Low Energy Low Carbon Buildings
Insulation First Edition January 2018 Daylighting A WHITE PAPER Low Energy Low Carbon Buildings Contents Page Introduction 3 Executive summary 3 Definitions used in this white paper 3 Background 4 Daylight
KINGSPAN INSULATION KOOLTHERM K10 SOFFIT INSULATION
Kingspan Insulation Ltd Pembridge Leominster Herefordshire HR6 9LA Tel: 0870 8508555 Fax: 0870 8508666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com APPROVAL INSPECTION TESTING
INSULATION FOR HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING
Insulation CI/Sfb (13.9) Rn7 M2 Fifth Issue November 2005 INSULATION FOR HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING High performance rigid extruded polystyrene insulation thermal conductivity
K7 Pitched Roof Board
CI/Sfb (27.9) Rn7 M2 Fourth Issue November 2002 RAFTER LEVEL INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES Premium performance rigid phenolic insulation thermal conductivity 0.018 W/m.K On average
K5 EWB. Insulation INSULATION FOR USE BEHIND TRADITIONAL AND LIGHTWEIGHT POLYMER MODIFIED RENDERS P E R F O R M A N C E
Insulation CI/Sfb (21.9) Rn7 M2 Seventh Issue May 2007 K5 EWB INSULATION FOR USE BEHIND TRADITIONAL AND LIGHTWEIGHT POLYMER MODIFIED RENDERS Premium performance rigid phenolic insulation thermal conductivity
TR26 LPC/FM / TR27 LPC/FM
Insulation A4/8 TR26/27 AW2163 Issue 2 Jan 2017 TR26 LPC/FM / TR27 LPC/FM INSULATION FOR WATERPROOFED FLAT ROOFS Super high performance rigid thermoset insulation LPCB approved to LPS 1181: Part 1 FM approved
K7 Pitched Roof Board
Insulation CI/SfB (27.9) Rn7 M2 Eleventh Issue May 2018 K7 Pitched Roof Board INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES l Premium performance rigid thermoset insulation thermal conductivities
Superior Performance Phenolic Insulation SR/TB. Insulation for Drylining Walls Fixed with Adhesive Dabs. Walls AS LOW AS
Superior Performance Phenolic Insulation Walls SR/TB Insulation for Drylining Walls Fixed with Adhesive Dabs AS LOW AS 020 Data Sheet SR/TB is a composite insulated panel of Xtratherm phenolic insulation
TR27 LPC/FM. Insulation
Insulation CI/SfB (27.9) Rn7 M2 Ninth Issue October 2017 TR27 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY, PARTIALLY BONDED BUILT UP FELT, MASTIC ASPHALT AND COLD LIQUID
PIR Insulation XT/TL-MF. Insulation for Drylining Walls (Mechanically Fixed) Walls 04/ /0183
PIR Insulation Walls XT/TL-MF Insulation for Drylining Walls (Mechanically Fixed) 04/4130 03/0183 Data Sheet Thin-R Thermal Liner Mechanically Fixed XT/TL-MF is a composite insulated panel of Xtratherm
Eco-Versal. insulation. Polyisocyanurate (PIR) foam core with aluminium foil composite to both sides BASELINE TOPLINE SLIMLINE
insulation Eco-Versal A universal solution for insulating pitched roofs, floors, walls, dormer cheeks & ceilings Eco-Versal 5 in 1 Eco-Versal 5 in 1 Polyisocyanurate (PIR) foam core with aluminium foil
CI/Sfb (2 ) Rn7 M2 Fourth Issue June Product Selector INSULATION FOR ROOFS, WALLS & FLOORS. Low Energy Low Carbon Buildings
Insulation CI/Sfb (2 ) Rn7 M2 Fourth Issue June 2011 Product Selector INSULATION FOR ROOFS, WALLS & FLOORS Visit our brand new website: www.kingspaninsulation.co.uk Low Energy Low Carbon Buildings Kingspan