Copyright 2002 AIA MASTERSPEC 05/02
|
|
- Jared Harrison
- 5 years ago
- Views:
Transcription
1 SECTION CRYSTALLINE WATERPROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. 1.2 SUMMARY A. This Section includes crystalline waterproofing. B. Related Sections include the following: 1. Division 3 Section "Cast-in-Place Concrete" for[ formwork, water stops, concrete slabs serving as floor toppings to protect waterproofing, and finishing concrete walls and slabs to receive waterproofing.] 2. Division 4 Section "Unit Masonry Assemblies" for preparing concrete unit masonry walls to receive waterproofing. 3. Division 7 Section "Joint Sealants" for elastomeric and preformed sealants in concrete and masonry walls and floors. 4. Division 9 Section "Portland Cement Plaster" for plaster finishes to be applied over waterproofing. C. Alternates: Refer to Division 1 Section "Alternates" for description of Work in this Section affected by alternates. 1.3 SUBMITTALS A. Product Data: Include material descriptions and installation instructions for crystalline waterproofing. B. Product Certificates: For crystalline waterproofing, signed by product manufacturer. C. Qualification Data: For installer and manufacturer. D. Manufacturer's inspection reports of completed installation. E. Warranty: Special warranty specified in this Section. 1.4 QUALITY ASSURANCE A. Installer Qualifications: An employer of workers trained and approved by manufacturer. CRYSTALLINE WATERPROOFING
2 B. Mockups: Provide mockups of crystalline waterproofing to verify selections made under sample submittals and to demonstrate aesthetic effects. 1. Architect will select locations of mockups that represent typical surfaces and conditions for applications of crystalline waterproofing. a. [Vertical] [Horizontal] Surfaces: Provide samples of at least [10 sq. ft. (0.9 sq. m)] <Insert value>. 2. Apply waterproofing according to requirements for the completed Work after permanent lighting and other environmental services have been activated. C. Preinstallation Conference: Conduct conference at Project site to comply with requirements in Division 1 Section "Project Management and Coordination." Review methods and procedures related to crystalline waterproofing including, but not limited to, the following: 1. Review and finalize construction schedule and verify availability of materials, Installer's personnel, equipment, and facilities needed to make progress and avoid delays. 2. Review required certifying procedures. 1.5 PROJECT CONDITIONS A. Weather Limitations: Proceed with application only when existing and forecasted weather conditions permit crystalline waterproofing to be performed according to manufacturer's written instructions and warranty requirements. B. Proceed with waterproofing work only after pipe sleeves, vents, curbs, inserts, drains, and other projections through the substrate to be waterproofed have been completed. Proceed only after concrete and masonry substrate defects, including honeycombs, voids, and cracks, have been repaired to provide a sound substrate free of forming materials, including reveal inserts. C. Ambient Conditions: Proceed with waterproofing work only if temperature is maintained at 40 deg F or above during work and cure period and space is well ventilated and kept free of water. 1.6 WARRANTY A. Special Warranty: Manufacturer's standard form in which manufacturer agrees to replace components of crystalline waterproofing that fails in material within specified warranty period. 1. Failures include, but are not limited to, the following: a. Failure to maintain watertight conditions within specified warranty period. 2. Warranty Period: (Five Ten) years from date of Substantial Completion. CRYSTALLINE WATERPROOFING
3 PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Products: Subject to compliance with requirements, provide one of the following: 1. Crystalline Waterproofing: a. Foxfire; P-1007 b. Foxfire; PL-1007 c. Foxfire; L Water Repellant a. Foxfire; 5000WB b. Foxfire; 5000 WB Cure and Seal 3. Stain Repellant a. Foxfire; Stain Repellant 4. Cleaners a. Foxfire Heavy Duty Concrete Cleaner b. Foxfire Efflorescence Remover c. Foxfire Super Blue Degreaser 5. Activators a. Foxfire Catalyst 2.2 MATERIALS A. Crystalline Waterproofing: A manufacturer s proprietary one component, clear colored (potassium, potassium/lithium, and lithium) based sealer in a water carrier, when applied, penetrates by capillary action into concrete or masonry and reacts chemically with free lime in the presence of water to develop crystalline growth within concrete or masonry capillaries to produce an impervious, dense, waterproof concrete or masonry. 1. Color: Clear 2. VOC Content: None B. Water Repellant: A manufacturer s proprietary blend of one component, VOC compliant, water-based penetrating modified silane/siloxane, when applied, penetrates by capillary action into concrete and masonry pores and capillaries forming a seal that repels water, but allows water vapor permeability. 1. Color: White dries clear without changing color of substrate. 2. VOC Content: Less than 37 g/l C. Stain Repellant: A manufacturer s proprietary blend of one component, VOC compliant, waterbased penetrating fluorsilane/siloxane, when applied, penetrates by capillary action into concrete and masonry pores and capillaries forming a seal that repels water, oil and graffiti, but allows water vapor permeability. 1. Color: Clear/yellow, dries clear 2. VOC Content: Less than 50 g/l D. Cleaners: A manufacturer s proprietary water base, low VOC compliant, dilutable detergent that penetrates the concrete substrate to purge contaminants from the concrete s capillary system. Manufacturer s cleaner to be used as part of waterproofing system to assure unit responsibility. CRYSTALLINE WATERPROOFING
4 E. Activators: A manufacturer s proprietary water base, colorless, non-toxic, low viscosity, nonflammable liquid formulation to increase alkali in masonry and concrete substrates. PART 3 - EXECUTION 3.1 EXAMINATION A. Acceptance of Conditions: Examine substrates, with Applicator present, where waterproofing is to be applied. 1. Proceed with application only after unsatisfactory conditions have been corrected. 2. Notify Architect in writing of active leaks or structural defects that would affect system performance. 3.2 PREPARATION A. Protect other work from damage from cleaning, preparation, and application of crystalline waterproofing. Provide temporary enclosure to confine spraying operation and to ensure adequate ambient temperatures and ventilation conditions for application. B. Stop active water leaks according to waterproofing manufacturer's written instructions. C. Repair damaged or unsatisfactory concrete or masonry according to manufacturer's written instructions. D. Surface Preparation: Surface must be free of any form of membrane Comply with waterproofing manufacturer's written instructions to remove efflorescence, chalk, dust, dirt, existing coatings, mortar spatter, grease, oils, curing compounds, and form-release agents to ensure that waterproofing penetrates concrete or masonry surfaces. E. Concrete Joints: Clean reveals according to waterproofing manufacturer's written instructions. F. ph level: Test ph content of concrete or masonry surface; ph level must be 9 or higher. If less than 9, an activator to increase ph must be used. 3.3 APPLICATION A. General: Comply with waterproofing manufacturer's written instructions for application. 1. Apply Foxfire (P-1007, PL-1007, or L-1007) to visually dry surface. 2. Apply waterproofing to [positive] [negative]-side surfaces. 3. Number of applications: [Two] [Three] for [brush] [roller] [spray] application. 4. Do not dampen surface between coats. After final application, wait minutes and apply two mist applications of potable water 15 minutes apart to concrete surface. 5. Apply Foxfire (5000WB, Stain Repellant) to dry surface, minimum 24 hours after application of sealer. CRYSTALLINE WATERPROOFING
5 6. Note: if ph level is below 9, Foxfire Catalyst should be applied in a single application at a rate of 200 sqft per gallon, a minimum of one hour prior to the application of the ( P- 1007, PL-1007, or L-1007) B. Existing Concrete and Masonry: 1. Vertical Surfaces: a. Apply from top to bottom to point of refusal using a low pressure sprayer (40 psi) with a fan-type tip. b. After first application has soaked in, normally minutes, apply second application. d. After final application of Foxfire (P-1007, PL-1007, or L-1007) is installed, and absorbed, wait approximately minutes and then apply two light coats of potable water to remove surface contaminants, waiting approximately minutes between applications. 2. Horizontal Surfaces: a. Apply an application of Foxfire (P-1007, PL-1007, or L-1007) to the point of refusal using either a low pressure sprayer (40 psi) with a fan-type tip or roller with an 11/4 nap. Brush or squeegee excess Foxfire P-1007 to untreated areas b. After first application has soaked in, wait approximately minutes prior to application of second application. d. After final application of Foxfire (P-1007, PL-1007, or L-1007) is installed, wait approximately minutes after final application of sealer and then apply two light applications of potable water to remove surface contaminants, waiting approximately minutes between applications. C. New Concrete and Masonry: 1. Vertical Surfaces: a. Apply from top to bottom until excess product is 6-8 inches below spray pattern using a low pressure sprayer (40 psi) with a fan-type tip or roller with an 11/4 nap. b. After first application has soaked in, normally minutes, apply second application. d. After final application of Foxfire (P-1007, PL-1007, or L-1007) is installed, wait minutes and then apply two light applications of potable water to remove surface contaminants, waiting approximately minutes between applications. 2. Horizontal Surfaces: a. Apply an application of Foxfire (P-1007, PL-1007, L-1007)so the surface will have a wet glaze look, using either a low pressure sprayer (40 psi) with a fan-type tip or roller with a 11/4 nap. Brush or squeegee excess Foxfire Sealer to untreated areas b. After first application has soaked in, wait minutes prior to application of second application. CRYSTALLINE WATERPROOFING
6 d. After final application of Foxfire (P-1007, PL-1007, or L-1007) is installed, wait approximately minutes and then apply two light applications of potable water to remove surface contaminants, waiting approximately minutes between applications. D. Allow Foxfire (P-1007, PL-1007, or L-1007) to cure a minimum of one day after application prior application of surface topping as recommended in writing by manufacturer. Full cure may take up to seven days depending on temperature, humidity and density of concrete. E. (Water or Stain) Repellant: 1. Vertical Surfaces: a. Apply Foxfire (5000WB, Stain Repellant) from top to bottom until excess product is 6-8 inches below spray pattern using a low pressure sprayer (15-25 psi) with a fan-type tip or roller with an 11/4 nap. Re-apply wet-on-wet second application within 2-3 minutes of first application. 2. Horizontal Surfaces: a. Apply an application of Foxfire (5000WB, Stain Repellant) using either a low pressure sprayer (15-25 psi) with a fan-type tip or roller with an 11/4 nap. Reapply wet-on-wet second application within 2-3 minutes of first application. 3.4 PROTECTION A. Protect applied crystalline waterproofing from severe weather exposure and water accumulation until surface is dry. 3.5 FIELD QUALITY CONTROL A. Testing: To be established by specifier. Testing can include both the Anhydrous Calcium Chloride Vapor Emission Test, the Tramex Concrete Moisture Encounter Meter Tester for Flooring or Rilem Tube testing for wind driven rain on horizontal or vertical surfaces. All surface readings must be documented by date and time-stamped photos. Test criteria to be established by specifier. B. Inspection: Manufacturer's representative to inspect completed application and to provide a written report that application complies with manufacturer's written instructions. END OF SECTION CRYSTALLINE WATERPROOFING
Multi-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 07 1616 - CRYSTALLINE WATERPROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationConstruction Standards PAGE
Construction Standards PAGE 071619-1 SECTION 071619 PART 1 - GENERAL 1.1 M.S.U. ISSUES A. Below grade construction should be protected by self-adhering sheet waterproofing in accordance with SECTION 071326
More informationSECTION CLEAR PENETRATING SEALERS SPECIFICATION
MANUFACTURER S GUIDE SPECIFICATIONS SECTION 071900 CLEAR PENETRATING SEALERS SPECIFICATION 900 Hensley Lane Wylie TX 75098 800-527-7092 www.carlisle-ccw.com Carlisle is a trademark of Carlisle. 2012 Carlisle.
More informationThis Section includes surface preparation and field application of anti-graffiti coating systems for the following vertical and horizontal surfaces:
0 0 0 0 0 0 SECTION 0 ANTI- GRAFFITI COATINGS PART - GENERAL RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division Specification
More informationA. Section includes hydraulic-cement-based, polymer-modified, self-leveling underlayment for application below interior floor coverings.
SECTION 03 54 16 - HYDRAULIC CEMENT UNDERLAYMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationSECTION Silane Water Repellents. Vexcon
SS114 SECTION 07 19 16 Silane Water Repellents SPECIFIER NOTE: The purpose of this guide specification is to assist the Specifier in developing a project specification for the use of Construction products.
More informationCHATTANOOGA, TN Last Updated: 02/07/18. NOTE TO SPECIFIER: Be sure to obtain the latest version of this Guide Specification.
NOTE TO SPECIFIER: Be sure to obtain the latest version of this Guide Specification. This Guide Specification is not a completed document ready for use. It must be edited (i.e., deleting, adding, or modifying
More informationSection SECTION RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 096723 - RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 096623 - RESINOUS MATRIX TERRAZZO FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationKOSTER AMERICAN CORPORATION
Section 09699 PART 1 GENERAL Water Vapor Emission Control Systems 1.1 RELATED DOCUMENTS A. Drawings, documents, and general provisions of the Contract, including, but not necessarily limited to, General
More information***********************************************************************************
AQUAFIN-2K/M Two-Component Cement-based Acrylic-based Waterproofing GUIDE AQUAFIN, Inc. SPECIFICATION PART 1 - GENERAL 1.1 SECTION INCLUDES SECTION 07 16 14 ACRYLIC MODIFIED (FLEXIBLE) CEMENTITIOUS WATERPROOFING
More informationSECTION EPOXY TERRAZZO
SECTION 09402 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to
More informationFLEXMAR 3-Coat High-Build Colored Quartz System
Guide Specification SECTION 09 67 23: HIGH-PERFORMANCE RESINOUS FLOORING FLEXMAR 3-Coat High-Build Colored Quartz System 20-27 mils DFT This guide specification is intended to assist the specifier in developing
More informationRENEW ELASTOMERIC ACRYLIC COATING (PAINT GRADE) MANUFACTURERS SPECIFICATION / SECTION
STUC-O-FLEX RENEW ELASTOMERIC ACRYLIC COATING (PAINT GRADE) MANUFACTURERS SPECIFICATION / SECTION 09 97 23 PART 1-GENERAL 1.00 SCOPE: Manufacturer's specifications containing the requirements necessary
More information(Specification writer shall choose the most appropriate section that applies to a given scope of work) SECTION Painting and Coating
Guide Specification Miracote Mirastain Architectural Staining System (Specification writer shall choose the most appropriate section that applies to a given scope of work) PART 1 - GENERAL 1.1 SUMMARY
More informationProduct Guide Specification
Nox-Crete Products Group 1444 South 20th Street PO Box 8102 Omaha, Nebraska 68108 Toll Free 800-669-2738 Phone 402-341-1976 Fax 800-329-6733 Website www.nox-crete.com E-mail customerservice@nox-crete.com
More informationCSC SPECIFICATIONS DRY SHAKE CRYSTALLINE WATERPROOFING Section
DRY SHAKE CRYSTALLINE WATERPROOFING Section 03 35 14 This section includes Krystol Broadcast, a crystalline waterproofing powder applied to the surface of freshly placed concrete during the final stages
More informationCSI SPECIFICATIONS DRY SHAKE CRYSTALLINE WATERPROOFING Section
DRY SHAKE CRYSTALLINE WATERPROOFING Section 03 35 14 This section includes Krystol Broadcast, a crystalline waterproofing powder applied to the surface of freshly placed concrete during the final stages
More informationA. Section includes historic treatment work consisting of rep ointing brick masonry as follows:
SECTION 040323 - HISTORJC BRlCK UNIT MASONRY REPOINTING PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION MOISTURE RESISTANT/WATER-PROOF FLOORING ADHESIVE FOR CONCRETE SLABS
SECTION 09699 MOISTURE RESISTANT/WATER-PROOF FLOORING ADHESIVE FOR CONCRETE SLABS PART 1 GENERAL 1.1 SECTION INCLUDES A. Testing and application of systems for the reduction of moisture resistant or water-proof
More informationSECTION A. American Society for Testing and Materials (ASTM):
hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy-Shell 1000 Color System GUIDE SPECIFICATION SECTION 09725 PART 1
More informationARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Products
ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Products SECTION 09 05 61.13 MOISTURE VAPOR EMISSION CONTROL PART 1 - GENERAL 1.1 RELATED DOCUMENTS
More informationSECTION A. American Society for Testing and Materials (ASTM):
hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy-Shell WB 50 Product Specification GUIDE SPECIFICATION SECTION 09725
More informationZYCOSIL WATER REPELLENT
ZYCOSIL WATER REPELLENT PART 1 GENERAL 1.01 SECTION INCLUDED A. Zycosil water repellents applied to exterior masonry surfaces B. In most cases protection of adjacent surfaces is not required; however,
More informationSECTION A. American Society for Testing and Materials (ASTM):
hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 863.967.1535 800.323.7357 fax: 863-965.2326 Seal-Krete High Performance Poly-Shell 7000 Color System GUIDE SPECIFICATION SECTION 09725 PART 1
More informationCustom Polishing Systems
Custom Polishing Systems VitraFlor by Bomanite Guideline Specification Standard Application PART 1 GENERAL SECTION 033000 CAST-IN-PLACE CONCRETE 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationSeal- Krete High Performance System
hp.seal-krete.com Rust-Oleum - 11 Hawthorn Parkway, Vernon Hills, IL 800.323.7357 PART 1 GENERAL 1.01 SECTION INCLUDES Seal- Krete High Performance Poly- Shell 70007 System GUIDE SPECIFICATION SECTION
More informationDryshake CSI Format Section 07160
Dryshake CSI Format Section 07160 PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Furnishing of all labor, materials, services and equipment necessary for the supply and installation of cementitious crystalline
More informationSECTION RESINOUS FLOORING or SECTION QUARTZ FLOORING
SECTION 09 67 23 RESINOUS FLOORING or SECTION 09 67 26 QUARTZ FLOORING PART 1 - GENERAL 1.1 SUMMARY (Specification writer shall add, delete or amend, as deemed necessary) A. Provide all labor, materials,
More informationPacific Polymers Elasto-Mat D&G Guide Specification
1 07141-1 August 2016 Pacific Polymers Elasto-Mat D&G Guide Specification SECTION 07141 FLUID APPLIED WATERPROOFING 2 07141-2 August 2016 Pacific Polymers Elasto-Mat D&G Guide Specification SECTION 07141
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 09 6613 - PORTLAND CEMENT TERRAZZO FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More information80648 StoColor Acryl Plus Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction
Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80648 StoColor Acryl Plus Acrylic-Based, Vertical
More informationCEMENTITIOUS CRYSTALLIZING WATERPROOFING PART 1 GENERAL
CEMENTITIOUS CRYSTALLIZING WATERPROOFING PART 1 GENERAL 1.1 SECTION INCLUDES A. Cementitious crystallizing waterproofing for interior/exterior walls and floor slabs with nonactive leaks. B. Cementitious
More informationMANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION
STUC-O-FLEX - ELASTOMERIC ACRYLIC FINISH APPLICATION TO PORTLAND CEMENT PLASTER / CONCRETE RENDER MANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION 09220-09 24 00 PART 1-GENERAL SCOPE: Manufacturer's
More informationMANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION
STUC-O-FLEX - ELASTOMERIC ACRYLIC FINISH APPLICATION TO PORTLAND CEMENT PLASTER / CONCRETE RENDER MANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION 09220-09 24 00 PART 1-GENERAL SCOPE: Manufacturer's
More informationList walls, planters, etc.., to which the anti-graffiti coating will be applied. Delete this note from the Contract Specifications.
X0321865 ANTI-GRAFFITI PROTECTION SYSTEM Effective: June 7, 2011 Revised: March 3, 2016 Description: This work shall consist of furnishing, and applying an anti-graffiti coating on all exposed faces of
More informationSECTION A. American Society for Testing and Materials (ASTM):
hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete Vapor-Shell GUIDE SPECIFICATION SECTION 09725 PART 1 GENERAL 1.01 SECTION INCLUDES A. Provisions
More informationPart 1 - GENERAL 1.01 DESCRIPTION. Section
Section 03 36 60 Concrete Densifier/Sealer/Hardener SPECIFIER NOTES: The following section is designed for treatment of uncovered concrete floor surfaces that will be exposed to medium to high volume of
More information1.1 Related Work Specified in Other Sections (Delete if Not Applicable):
NOTE TO SPECIFIER: Concrete Resurfacing (Broom Finish) System provides an economical alternative to the removal and replacement of existing concrete. This system creates a flexible and durable finish that
More information1.1 SECTION INCLUDES.1 The requirements for the application of water repellents/ anti-graffitiant for exterior surfaces.
GYMNASIUM ADDITION & RENOVATION Page 1 of 5 Part 1 General 1.1 SECTION INCLUDES.1 The requirements for the application of water repellents/ anti-graffitiant for exterior surfaces. 1.2 RELATED SECTIONS.1
More informationPacific Polymers Elasto-Deck BT Guide Specification
1 07141-1 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141 FLUID APPLIED WATERPROOFING 2 07141-2 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141
More informationSECTION Arisfor WallGuard
1.1 GENERAL A. is a three component polymerized cementitious protective coating that can be applied to a variety of vertical interior and exterior substrates including: stucco, exterior gypsum sheathing,
More informationADDENDUM 1. Bid Date March 8, 2017 at 2 pm CST. March 2, 2017
ADDENDUM 1 March 2, 2017 Project: Topeka & Shawnee County Public Library Phase 1 Interior Renovations 1515 SW 10 th Street Topeka, Kansas 66604 Architect: Tevis Architectural Group 1250 SW Oakley Avenue,
More information80230 StoColor Coat Sand Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction
80230 StoColor Coat Sand Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction Section 099723 CONCRETE AND MASONRY COATINGS Sto Corp. 3800 Camp Creek
More informationSECTION PENETRATION FIRESTOPPING PART 1- GENERAL PART 2- PRODUCTS 1.1 RELATED DOCUMENTS
SECTION 07 8413- PENETRATION FIRESTOPPING PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information80657 StoColor Texture - Fine Textured Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction
80657 StoColor Texture - Fine Textured Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction Section 099723 CONCRETE AND MASONRY COATINGS Sto Corp.
More informationSECTION CONCRETE AND MASONRY COATINGS
80658 StoColor Texture - Coarse Textured Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction SECTION 099723 CONCRETE AND MASONRY COATINGS Sto Corp.
More informationEVERLAST CONCRETE TECHNOLOGIES PROTECTION PRODUCTS SECTION CONCRETE ADDITIVES AND ADMIXTURES
EVERLAST CONCRETE TECHNOLOGIES PROTECTION PRODUCTS SECTION 03060 CONCRETE ADDITIVES AND ADMIXTURES GENERAL 1.1 SECTION INCLUDES A. Concrete additives and admixtures for the following applications: 1. Concrete
More informationSILICONE ROOF COATING RESTORATION (RCR) SYSTEM OVER METAL ROOF PANEL
SILICONE ROOF COATING RESTORATION (RCR) SYSTEM OVER METAL ROOF PANEL Part 1. 1.1 Description General Conditions A. Scope of Work Provide all materials, labor and equipment required for the installation
More informationSection COATING RESTORATION
80217R StoColor Lotusan Acrylic-Based, Vertical Above-Grade Exterior Wall Coating with Lotus-Effect Technology for Recoating Prepared, Previously Painted Surfaces Section 09 01 90.92 COATING RESTORATION
More informationPacific Polymers Elasto-Deck 5000X2 Guide Specification
1 071813-1 July 2018 Pacific Polymers Elasto-Deck 5000X2 Guide Specification SECTION 071813 TRAFFIC COATINGS ELASTO-DECK 5000X2 OVER CONCRETE 2 071813-2 July 2018 Pacific Polymers Elasto-Deck 5000X2 Guide
More informationMagna Wall. Elastomeric Coatings (Non-Textured) Product Overview, Instructions, & Data
Magna Wall Elastomeric Coatings (Non-Textured) Product Overview, Instructions, & Data s t u c c o D 9 Magna Wall Elastomeric Coatings (Non-Textured) product Overview Magna Wall Elastomeric Coatings are
More informationSECTION LITHIUM BASED MOISTURE VAPOR CONTROL CURE SYSTEM AND FINISHING
SECTION 033960 LITHIUM BASED MOISTURE VAPOR CONTROL CURE SYSTEM AND FINISHING PART 1 GENERAL 1.1 SECTION INCLUDES A. Work includes labor, materials, appliances, tools, equipment, facilities, transportation,
More informationA. This Section includes resinous flooring systems with epoxy body coat(s).
SECTION 096723 - RESINOUS FLOORING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes resinous flooring systems with epoxy body coat(s). 1. Application Method: Troweled (Slurry, Seeded or Broadcast
More informationA. Section includes surface preparation and the application of high-performance coating systems on the following substrates:
ILLINOIS STATE UNIVERSITY CORDOGAN, CLARK & ASSOCIATES, INC. WATTERSON DINING EXPANSION PROJECT 960 RIDGEWAY AVENUE NORMAL, ILLINOIS AURORA, ILLINOIS CCA PROJECT NUMBER: 14362 630-896-4678 BID SET JULY
More informationA. This Section includes traffic coatings for the following applications:
SECTION 071800 - TRAFFIC COATINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes traffic coatings for the following applications: 1. Interior and exterior, pedestrian traffic. 2. Vehicular traffic.
More information80648R StoColor Acryl Plus Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for Recoating Prepared, Previously Painted Surfaces
80648R StoColor Acryl Plus Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for Recoating Prepared, Previously Painted Surfaces Section 09 01 90.92 COATING RESTORATION Sto Corp. 3800 Camp Creek
More informationSpecifications. Specifications (Architectual) Metallic System. Metallic System
(Architectual) Metallic System Architectual NeverStrip Floor Coatings, 6-15 Mils Master Format Section 096700 Fluid Applied Flooring 1 of 6 NeverStrip Metallic High-Build Decorative Epoxy/Urethane Coating
More informationARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX ARDIFLO Pump System Underlayments
ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX ARDIFLO Pump System Underlayments SECTION 07 26 19 TOPICAL MOISTURE VAPOR EMISSION SYSTEM WITH ARDEX
More informationStudent Services & Classroom Addition
SECTION 071326 - SELF-ADHERING SHEET WATERPROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Underlayments and Toppings
ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Underlayments and Toppings SECTION 07 26 19 TOPICAL MOISTURE VAPOR MITIGTION SYSTEM PART 1 - GENERAL
More information80201 StoColor Acryl Flat Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction
80201 StoColor Acryl Flat Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for New Concrete, Stucco, and Masonry Construction Section 099723 CONCRETE AND MASONRY COATINGS Sto Corp. 3800 Camp Creek
More informationSection COATING RESTORATION
Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80658R StoColor Texture - Coarse Textured Acrylic-Based,
More informationSECTION RESILIENT TILE FLOORING. A. Section includes vinyl composition floor tile and accessories indicated and as specified.
SECTION 09 65 19 RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 SUMMARY A. Section includes vinyl composition floor tile and accessories indicated and as specified. 1.2 SUBMITTALS A. Product Data: Submit
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 099600 - HIGH PERFORMANCE COATINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationApplication Specification:
Application Specification: GW-15-UBU-HD April 2014 Supersedes 5/13 PART 1 - GENERAL 1.1 SUMMARY Division 07 18 16: GACOFLEX POLYURETHANE ELASTOMERIC COATING SYSTEM FOR VEHICULAR TRAFFIC DECKS AND RAMPS
More informationGUIDE SPECIFICATION SECTION CRYSTALLINE WATERPROOFING
GUIDE SPECIFICATION SECTION 071616 PART 1 - GENERAL CRYSTALLINE WATERPROOFING 1.1 SECTION INCLUDES A. Cementitious Crystalline Waterproofing on concrete structures and surfaces as shown on drawings and
More informationGUIDE SPEC SECTION Injection Grout (IG10)
Part 1 GENERAL MASONRY UNIT RESTORATION 1.1 SUMMARY OF WORK A. For repairing, patching, injecting cracks and re-attaching stone fragments to original substrate. B. Related Sections 1. Section 01351 Special
More informationChemMasters. Installation Guidelines
ChemMasters Installation Guidelines Traz 25 is a state of the art, film forming concrete and masonry waterproofing sealer formulated with methyl methacrylate polymers. 1.0 General 1.1 Scope This specification
More informationSECTION A. American Society for Testing and Materials (ASTM):
hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy Metallic System GUIDE SPECIFICATION SECTION 09725 PART 1 GENERAL
More informationSOLAR COATING SYSTEMS ACRYLIC RENOVATION ROOF 4.5. Specification for Built-Up Roofing SUMMARY
SOLAR COATING SYSTEMS ACRYLIC ROOF RENOVATION 4.5 Specification for Built-Up Roofing 07590 PART 1. GENERAL 1.01 SUMMARY NAME ADDRESS A. Furnish and install a seamless, waterproof spray applied elastomeric
More information80212R StoColor Lastic Acrylic-Based, Elastomeric Vertical Above-Grade Exterior Wall Coating for Recoating Prepared, Previously Painted Surfaces
Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80212R StoColor Lastic Acrylic-Based, Elastomeric
More informationPacific Polymers Elasto-Deck 5000MR Guide Specification
1 071813-1 July 2018 Pacific Polymers Elasto-Deck 5000MR Guide Specification SECTION 071813 TRAFFIC COATINGS ELASTO-DECK 5000MR OVER CONCRETE 2 071813-2 July 2018 Pacific Polymers Elasto-Deck 5000MR Guide
More informationFLUID APPLIED WATERPROOFING SECTION SPECIALTY COATINGS
SECTION 07 14 00 FLUID APPLIED WATERPROOFING SECTION 09 96 00 SPECIALTY COATINGS Multicoat Seamless Waterproofing System for Fountains & Ponds ************************************************************************************************************************
More informationCHATTANOOGA, TN Last Updated: 02/07/18. NOTE TO SPECIFIER: Be sure to obtain the latest version of this Guide Specification.
NOTE TO SPECIFIER: Be sure to obtain the latest version of this Guide Specification. This Guide Specification is not a completed document ready for use. It must be edited (i.e., deleting, adding, or modifying
More informationSC-113 STRONGCOTE VEHICULAR GRADE TRAFFIC DECK MEMBRANE SYSTEM SECTION 07570
PART 1 - GENERAL 1.01 SECTION INCLUDES SC-113 STRONGCOTE VEHICULAR GRADE TRAFFIC DECK MEMBRANE SYSTEM SECTION 07570 A. SC-113, Heavy Duty Vehicular Grade Traffic Deck Membrane System with Migratory Corrosion
More informationApplication Specification:
Application Specification: GW-15-UBU-HP April 2014 Supersedes 5/13 PART 1 - GENERAL 1.1 SUMMARY Division 07 18 16: GACOFLEX POLYURETHANE ELASTOMERIC COATING SYSTEM FOR HELICOPTER PADS A. This section describes
More information80648R StoCoat Acryl Plus Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for Recoating Prepared, Previously Painted Surfaces
Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80648R StoCoat Acryl Plus Acrylic-Based, Vertical
More informationSection Pedestrian Traffic Coatings
Guide Specification MiraFlex II - For Concrete Surfaces Pedestrian Deck and Waterproofing System (Specification writer shall choose the most appropriate section that applies to a given scope of work, including
More informationSECTION BRICK MASONRY ASSEMBLIES
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Face brick. 2. Mortar and grout. 3. Ties and anchors. 4. Miscellaneous masonry accessories. 1.2 SUBMITTALS A. Product Data: For each type
More informationSYSTEM GUIDE SPECIFICATION FOR SUPER-KRETE MOISTURE VAPOR EMISSIONS TREATMENT SYSTEM S SECTION ; /19; ;
SYSTEM GUIDE SPECIFICATION FOR SUPER-KRETE MOISTURE VAPOR EMISSIONS TREATMENT SYSTEM S-10000 SECTION 01 71 16; 02 25 16/19; 03 01 30; 0716 16 This product guide specification is written according to the
More informationRESINOUS FLOORING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS Bid #2017-17 A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
More information1.2 SUMMERY A. Section Includes: 1. High-Performance Polyurethane Resinous flooring systems. 2. Decorative Polyurethane Resinous flooring systems.
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and supplementary Conditions and Division 01 Specification Sections apply to this Section. 1.2
More informationSECTION A. American Society for Testing and Materials (ASTM):
hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 863.967.1535 800.323.7357 fax: 863-965.2326 Seal-Krete High Performance Poly-Shell 7000 Single Quartz Broadcast System GUIDE SPECIFICATION SECTION
More information80201R StoColor Acryl Flat Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for Recoating Prepared, Previously Painted Surfaces
Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80201R StoColor Acryl Flat Acrylic-Based, Vertical
More informationSECTION (07100) - DAMPPROOFING AND WATERPROOFING
SECTION 07 10 00 (07100) - DAMPPROOFING AND WATERPROOFING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Sheet Membrane Waterproofing 2. Under-Slab-On-Grade Vapor Barrier B. Related Sections: 1.02
More informationJewel Stone. Decorative Concrete Overlay System. Part 1 GENERAL MANUFACTURER S SPECIFICATION
SEPTEMBER 2016 Jewel Stone Decorative Concrete Overlay System MANUFACTURER S IFICATION 09 62 81 Part 1 GENERAL 1.1 RELATED SECTIONS.1 Specification 03 30 00 Cast-in-Place Concrete.2 Specification 09 70
More informationAcrylitex Tilt UP Primer Guide Specification Revised August 1, 2008
Acrylic Technologies, Inc. Telephone (503) 653.4061 Fax: (503) 552.1441 Website: www.acrylitex.com Specifier Note: This manufacturer's guide specification specifies Acrylitex Tilt UP Primer for interior
More informationSECTION RESINOUS FLOORING PLEXIQUARTZ BROADCAST SKID-RESISTANT QUARTZ SYSTEM
SECTION 096723 RESINOUS FLOORING PLEXIQUARTZ BROADCAST SKID-RESISTANT QUARTZ SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. This section includes the following: 1. Seamless epoxy flooring system, 1/16 th, 3/32
More informationSECTION SIMULATED STONE MASONRY
Concrete Wall System Specifications PART 1 GENERAL 1.01 SECTION INCLUDES SECTION SIMULATED STONE MASONRY A. Construction of textured and colored formed concrete surfaces using simulated stone masonry molds
More informationA. Drawings and general provisions of the Contract apply to this Section including all documentation provided in RFP#
SECTION 096466 - WOOD ATHLETIC FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section including all documentation provided in. 1.2 SUMMARY
More informationSECTION SANDSTONE RESTORATION
SECTION 04 01 40.91 - SANDSTONE RESTORATION Part 1 GENERAL 1.1 SUMMARY OF WORK A. For repairing and patching of sandstone. B. Related Sections 1. Section 01351 Special Procedures for Historic Treatment
More informationSection RESILIENT TILE FLOORING INCLUDING VINYL COMPOSITION TILE
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. TARKETT WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF
More informationSECTION SURFACE-APPLIED CRYSTALLINE WATERPROOFING AND CONCRETE REPAIR
SECTION PART 1 GENERAL 1.1 SECTION INCLUDES A. Surface-applied crystalline waterproofing treatment. B. Crystalline compounds for the repair of leaking cracks, holes and joints found in concrete. 1.2 RELATED
More informationAsh Brook Golf Course Scotch Plains, New Jersey
SECTION 033543 - POLISHED CONCRETE FINISHING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationROOF REPLACEMENT AND ALTERATIONS TO WOODSTOCK Barrett Architecture, PC WASTE WATER TREATMENT FACILITY - Woodstock, VT February 28, 2019 SECTION
SECTION 079200 PART 1 - GENERAL 1.1 GENERAL PROVISIONS A. Attention is directed to the CONTRACT AND GENERAL CONDITIONS and all Sections within DIVISION 01 - GENERAL REQUIREMENTS which are hereby made a
More informationSECTION EPOXY MOSAIC COMPOSITION FLOORING Dex-O-Tex Cheminert Terracolor
SECTION 09720 EPOXY MOSAIC COMPOSITION FLOORING Dex-O-Tex Cheminert Terracolor PART 1.00 - GENERAL 1.01 GENERAL REQUIREMENTS A. Work of this Section, as shown or specified, shall be in accordance with
More informationCentenary United Methodist Church January Code Improvements & North Entry Remodel Beatrice, Nebraska ADDENDUM NO. 1
Centenary United Methodist Church January 5. 2018 ADDENDUM NO. 1 The Architect/ Engineer issues this addendum, applicable to the above named project, to all known Contractors before receipt of proposal.
More information80657R StoColor Texture Fine Textured Acrylic-Based, Vertical Above-Grade Exterior Wall Coating for Recoating Prepared, Previously Painted Surfaces
Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80657R StoColor Texture Fine Textured Acrylic-Based,
More information