Building Maintenance & Property Management Syllabus Outline
|
|
|
- Claire Blair
- 5 years ago
- Views:
Transcription
1 Building Maintenance & Property Management Syllabus Outline Building Maintenance & Property Management Program The knowledge-based Building Maintenance & Property Management Course is an accelerated method of learning multiple trades for the increasing number of maintenance and property management jobs involving skills in more than a single trade. With certificates in two individual trade courses and a property management license, the exclusive and broad-based curriculum enables candidates to begin their maintenance career; or in entry-level property management career. Each candidate will learn to oversee the business responsibilities of real estate that is usually owned by another party. These properties may be small homes, large multi-family buildings, or expensive retail complexes. They are responsible for a variety of tasks, including filing taxes, tenant verification and management, rent collection, maintenance, maintenance building systems, plumbing, carpentry, and electrical. Property Managers need to be familiar with the laws and regulations for real estate in their area, and they must have superb customer service, marketing, and communications skills. Three complete courses in one course of study. Building Maintenance & Property Management Building Maintenance CMT I Unit 101 Reading Blueprints 0 Introduction to Blueprints Machine Parts Machine Drawings Sheet Metal Drawings Building Drawings Hydraulic and Pneumatic Drawings Piping and Plumbing Drawings Electrical Drawings Air Conditioning and Refrigeration Drawings Sketching Unit 102 Reading Schematics and Symbols 0 Introduction to Schematics and Symbols Symbols on Schematics Electrical Symbols Electrical Diagrams Piping Symbols Piping Diagrams Hydraulic and Pneumatic Symbols Hydraulic and Pneumatic Diagrams Air Conditioning and Refrigeration Systems Welding and Joining Symbols Unit 103 Using Mathematics in the Plant Whole Numbers Common Fractions Decimal Fractions Ratios and Proportions Geometry Algebra Unit 104 Making Measurements Units of Measurements Metric Measurements Linear Measurement
2 Comparison and Surface Measurement Measuring Bulk Materials Measuring Motion Measuring Forces Measuring Temperature Measuring Fluids 0 Measuring Electricity Unit 105 Metals Introduction to Metals Properties of Metals Manufacturing Processes Iron and Steel Standard Steels Unit 106 Non-Metals Introduction to Non-Metals Construction Materials Insulating Materials Paints and Coatings Industrial Chemicals Unit 107 Using Hand Tools 0 Measuring Tools Wrenches and Screwdrivers Pipefitting Tools Plumbing Tools Electrician s Tools Woodworking Tools Masonry, Plastering, and Glazing Tools Sheet Metalworking Tools Metalworking Tools Hoisting and Pulling Tools Unit 108 Using Portable Power Tools 0 Electric Drills Electric Hammers Pneumatic Drills and Hammers Screwdrivers, Nutrunners, and Wrenches Linear-Motion Saws Circular Saws Routers and Planes Electric Sanders Grinders and Shears Tool Sharpening Unit Industrial Safety and Health Introduction to Safety and Health Government Safety Regulations Personal Protective Equipment Chemical Safety Tool Safety Material Handling Working Safely with Machinery Working Safely with Electricity Electrical Equipment Safety Fire Protection Protecting Your Health A Safe Work Environment
3 Unit 110 Developing Troubleshooting Skills 0 Introduction to Troubleshooting Working with Other People Troubleshooting Techniques Aids to Troubleshooting Preparing for Troubleshooting Using Schematics and Diagrams Solving Mechanical Problems Solving Electrical Problems Breakdown Maintenance Planned Maintenance Unit 391 Force and Motion Scalars and Vectors Motion along a Straight Line Acceleration How to Describe Force Force and Acceleration Building Maintenance CMT II Unit 112 Generating Steam in the Power Plant Boiler Operation Boiler Maintenance Unit 113 Using Steam in the Power Plant Boiler Instrumentation, Controls, and Safety Gauges Unit 201 Basic Electricity/Electronics 0 Introduction to Electricity Static Electricity Current Electricity Magnetism Current, Resistance, and Potential Difference Electrical Components Conductors DC Circuits AC Circuits Electronics Unit Electrical Safety and Protection Electrical Hazards Unit 207 Single-Phase Motors 0 Motor Installation Motor Maintenance Unit 210 Electrical Troubleshooting Skills 0 Troubleshooting Lighting Systems Saving Time in Troubleshooting Unit 301 Understanding Basic Mechanics The safe Use of Hand Tools
4 The Safe Use of Portable Power Tools Fasteners Unit 302 Selecting and Using Lubricants Principles of Lubrication Oils and Their Applications General Purposes Greases Lubricant Storage and Handling Unit Power Transmission Equipment Belt Drives Chain Drives Unit 304 Selecting and Maintaining Bearings 0 Bearings and Shafts Plain Journal Bearings I Plain Journal Bearings II Anti-friction Bearings I Anti-friction Bearings II Ball and Roller Bearings Specialized Bearings Bearing Seals Lubrication Bearing Maintenance Unit 305 Pumps 0 Pump Development and Application Basic Pump Hydraulics End-Suction Centrifugal Pumps Propeller and Turbine Pumps Rotary Pumps Packings and Seals Pump Maintenance Unit 306 Piping Systems Piping Systems Metal Piping Non-metallic Piping Tubing Unit 308 Hydraulic Troubleshooting Skills Hydraulic Systems Hydraulic Schematic Diagrams Installing Hydraulic Components Installing Pipes and Tubes Selecting Hydraulic Fluids Unit 309 Basic Pneumatics Pneumatic Principles Reciprocating Compressors Rotary Compressors Primary Air Treatment Secondary Air Treatment Unit 318 Industrial Rigging Introduction to Industrial Rigging Scaffolds and Ladders
5 Unit 341 Maintenance of Mechanical Drives Chain Drives Belt Drives Unit 375 Landscaping Maintenance Basic Plant Care Shade Trees Turf Management Shrub and Flower Care Pest and Disease Control Unit 417 Welding Principles Fundamentals of Welding Unit 431 The Refrigeration Cycle Refrigeration and Air Conditioning Basics Basic Refrigeration Cycle Unit 432 Refrigerants and Refrigerant Oils Physical Properties of Refrigerants Refrigerant Classification and Applications Unit 433 Compressors Introduction to Compressors Unit 434 Evaporators and Metering Devices Introduction to Evaporators Unit 435 Condensers and Cooling Towers Air Cooled Condensers Water Cooled Condensers Property Management Unit 100 Marketing Plan.1 Market Analysis.2 Analysis of Alternative Programs.3 Property Analysis.4 Responsibilities and Limitations.4.1 According to Contract.5 Implementation.6 Owner s Objective.7 Analysis of Competitive Properties Unit 200 Accounting Systems.1 Budgeting Process.1.1 Analysis of Income and Expenses.1.2 Cash Flow and Projections.1.3 Capital Expenditures.1.4 Escrow Accounts and Reserves
6 .2 Reports and Records.3 Lease Administration.3.1 Pass-Throughs.3.2 Escalators Clauses.4 Fiscal Responsibility.5 Asset Management Unit 300 Facilities Management.1 Physical Inspections.2 Service Contract Negotiations.3 Utility Management.3.1 Water consumption.3.2 Electrical/Natural Gas.3.3 Other.4 Preventive Maintenance.5 Risk Management/Insurance.6 Capital Repairs.7 Marketing Unit 400 District of Columbia Laws, Rules and Regulations Regarding Property Management.1 Rent Control.2 Occupancy Housing and Building Codes.3 Leases and Security Deposits.4 Agency/Contract Law.5 Zoning.6 Sale and Conversion.6.1 Transfer of Ownership/Tenant Opportunity to Purchase Act.6.2 District Opportunity to Purchase Act.7 Fair Housing/Human Rights Act Employment.9 Landlord-Tenant Relationship.10 Police and Fire Codes.11 Record Keeping.12 Tenant s Rights Under Foreclosure.13 Evictions
Custom Book Index. Schoolcraft Publishing Custom Books
A division of Telemedia, Inc. SCP 458 SCP 377 A division of Telemedia, Inc. A division of Telemedia, Inc. Schoolcraft Publishing Custom Book Index With over 1000 individual chapters to choose from, Schoolcraft
4th Class Power Engineering (PEN) Curriculum Mapping
Curriculum Mapping Program Curriculum A collection of 25 CTS courses have been developed to align with the revised (2017) 4th Class Power Engineering course outline. These courses, when combined, cover
MANUFACTURING MECHANICAL. Twist Drills, Reamers, and Rotary Cutting Devices. Bearing Identification. Fasteners and Screw Threads
Twist Drills, Reamers, and Rotary Cutting Devices Bearing Identification MANUFACTURING The objective of this course is to provide the student with an expanded understanding of the use, design, construction,
Terms and Conditions for Job Descriptions
Terms and Conditions for Job Descriptions Job Descriptions at HospitalityLawyer.com are provided as informational, educational, and illustrative purposes only. HospitalityLawyer.com does not render legal
Apprenticeship Training Standard. Schedule of Training. Bearings Mechanic. Trade Code: 615A. Development Date: 2000
Apprenticeship Training Standard Schedule of Training Bearings Mechanic Trade Code: 615A Development Date: 2000 This document is the property of the apprentice named inside and represents the official
BOILERMAKER. If you like to. then you may just have a future as a Boilermaker. Learn more at BuildYourFutureIndiana.org
BOILERMAKER BOILERMAKER If you like to Be physically active Be around people Be outdoors Solve problems Work under pressure Work with math and details Use technology then you may just have a future as
Mechatronics Courses by School Period
Mechatronics Courses by School Period Year One P1 P1 P2 P3 P3 P3 P4 P4 P4 Integrated Systems Industrial Math (Geometry, Trig, Algebra,) Blueprint Reading Machine Tool I (Hand tools-measuring-saws & Drill
4th Class Curriculum Document SOPEEC Syllabus, dated November 2017 Previous Syllabus dated 2012 Updated. July 2017 By BFB
4th Class Curriculum Document SOPEEC Syllabus, dated November 2017 Previous Syllabus dated 2012 Updated July 2017 By BFB The SOPEEC syllabi are the official governing document for SOPEEC examinations.
RAMSAY CORPORATION MAINTENANCE & REPAIR ASSESSMENTS REVISED IN 2014
RAMSAY CORPORATION 2016 MAINTENANCE & REPAIR ASSESSMENTS ELECTEST MECTEST MAINTEST Gold Winner IN 2012 RR47-A or OL47-A RM47 Administration Manual Used for selection of electrical repair and maintenance
100 Safety and Soft 114 Fall Protection 150 Environmental Skills Awareness 116 Compressed Gas 101 Personal Protective Cylinder Safety
100 and Soft Skills 101 Personal Protective Equipment (PPE) 101-01 Personal Protective Equipment 101-02 Hearing and Noise 101-03 Respiratory Protection Program 102 Worksite 102-01 Slip, Trip, and Fall
SCIENTIFIC MANAGEMENT TECHNIQUES, INC.
SCIENTIFIC MANAGEMENT TECHNIQUES, INC. Unique Testing and Training Solutions for Industry Solving the Skills Crisis by Helping Manufacturers Identify, Train, and Keep the Best People Forty Years of Success
MECHANICAL AND ELECTRICAL SEMINARS
INDUSTRIAL TRAINERS OF AMERICA, INC. 2016 COURSE CATALOG MECHANICAL AND ELECTRICAL SEMINARS Hands-on Training Mechanical Skills Training Electrical Skills Training Fluid Power Training HVAC Training EPA
IHRDC s Competency-Based e-learning Pathways for Petrochemicals Technicians
International Human Resources Development Corporation V.1.0 IHRDC s Competency-Based e-learning Pathways for Petrochemicals Technicians Competency-Based Training pathways for petrochemicals Technicians
Industrial Mechanic (Millwright) Level 3
Level 3 C1 Shaft Alignment II Duration: 10 hours 3 hours 7 hours This unit is designed to introduce knowledge of the procedures for shaft alignment using the reverse dial method. It is also designed to
Apprenticeship Training Standard. Schedule of Training. Fitter Assembler (Motor Assembly) Trade Code: 661H
Apprenticeship Training Standard Schedule of Training Fitter Assembler (Motor Assembly) Trade Code: 661H Development Date: August 2000 NOTICE OF COLLECTION OF PERSONAL INFORMATION 1. At any time during
IHRDC s Competency-Based e-learning Pathways for Refinery Personnel
International Human Resources Development Corporation V.2.0 IHRDC s Competency-Based e-learning Pathways for Refinery Personnel COMPETENCY-BASED TRAINING PATHWAYS FOR REFINERY TECHNICIANS Our highly regarded
SCIENTIFIC MANAGEMENT TECHNIQUES, INC.
SCIENTIFIC MANAGEMENT TECHNIQUES, INC. Unique Testing and Training Solutions for Industry Solving the Skills Crisis by Helping Manufacturers Identify, Train, and Keep the Best People Forty Six Years of
APPLIED SKILLS AND KNOWLEDGE
WELDING APPLIED SKILLS AND KNOWLEDGE PERFORM TECHNICAL READING 1 Identify details and specifications 2 Follow detailed directions 3 Use book mechanics (tables, index, etc.) 4 Locate information and problem
MACHINISTS REV: 04/04/16
MACHINISTS REV: 04/04/6 Occupation Overview: Machinist Foundational Competencies Operation Monitoring: Watching gauges, dials, or other indicators to make sure a machine is working properly. Critical Thinking:
THE CALIFORNIA STATE UNIVERSITY Office of the Chancellor 401 Golden Shore Long Beach, CA (562) Date: May 3, 2005 Code: HR
THE CALIFORNIA STATE UNIVERSITY Office of the Chancellor 401 Golden Shore Long Beach, CA 90802-4210 (562) 951-4425 Date: May 3, 2005 Code: HR 2005-20 To: From: Subject: CSU Presidents Jackie R. McClain
Windham School District. Schools Within the Texas Department of Criminal Justice
Windham School District Schools Within the Texas Department of Criminal Justice The Automotive Fundamentals course includes power and hand tools, safety, vehicle maintenance, fasteners/gaskets/seals and
IHRDC s Competency-Based e-learning Pathways for Refinery Technicians
International Human Resources Development Corporation V.1.0 IHRDC s Competency-Based e-learning Pathways for Refinery Technicians Competency-Based Training pathways for Refinery Technicians Our highly
th Class Power (Operating) Engineer Certification and Examination Guide
Effective: November 1, 2017 Document Uncontrolled if Printed This document replaces all previous versions Revisions/updates to this document are reflected by a change in the above date Syllabus The following
CITY OF REEDLEY. Water Systems Specialist I. Water Systems Specialist II
CITY OF REEDLEY WATER SYSTEMS SPECIALIST I WATER SYSTEMS SPECIALIST IT DEFINITION Under immediate supervision (Water Systems Specialist I) or general supervision (Water Systems Specialist II), to perform
Apprenticeship and Industry Training
Apprenticeship and Industry Training Millwright Apprenticeship Course Outline 016.1 (2013) ALBERTA ENTERPRISE AND ADVANCED EDUCATION Millwright apprenticeship course outline ISBN 978-1-4601-0692-1 (PDF)
Agricultural Mechanization CIP Task Grid
1 Secondary Task List 100 SUPERVISED AGRICULTURAL EXPERIENCE 101 Develop short-, mid- and long-term project plans. 102 Develop a Supervised Agricultural Experience (SAE) based upon individual interests/career
SUPERVISING FOOD PRODUCTION EQUIPMENT TECHNICIAN
PERSONNEL COMMISSION Class Code: 0499 Salary Range: 38 (S1) JOB SUMMARY SUPERVISING FOOD PRODUCTION EQUIPMENT TECHNICIAN Under general supervision, to organize, supervise and participate in the highly
Curriculum Outline. These items will be covered during the first week of the session.
Curriculum Outline Block 1- Workplace Safety (26 hours) Safety and safe work procedures are consistent throughout the construction industry. This segment involves 24 hours of training and can be easily
Job Ready Assessment Blueprint. Test Code: 4012 / Version: 01 Building Trades Maintenance
Blueprint Test Code: 4012 / Version: 01 Building Trades Maintenance Specific Competencies and Skills Tested in this Assessment: Safety Use tools and equipment safely Demonstrate electrical safety Respond
Construction Worker I / II / III Ranges 13, 15, 17
Calaveras County Water District May 2012 Construction Worker I / II / III Ranges 13, 15, 17 DEFINITION Under general supervision, performs new construction, repair, installation, preventive and corrective
Mechanical-Electrical Technology MECHANICAL-ELECTRICAL TECHNOLOGY Sacramento City College Catalog
Mechanical-Electrical Technology MET Degree: A.S. Mechanical-Electrical Technology Certificates of Achievement: Mechanical-Electrical Technology Mechanical Systems Technician Certificate: Commercial Building
SUMMER 15 EXAMINATION
SUMMER 15 EXAMINATION Subject Code: 17413 ( EME ) Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
Building Trades Maintenance
Teacher Assessment Blueprint Building Trades Maintenance Test Code: 5264 / Version: 01 Copyright 2012 NOCTI. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information
HARPER INTERNATIONAL
Page 1 of 5 HARPER INTERNATIONAL POSITION DESCRIPTION The Position Description is the tool used by Harper International to communicate and clarify the essential job functions, establish the basis for performance
Program Description MECHATRONIC SYSTEMS TECHNICIAN ACADEMY
Program Description MECHATRONIC SYSTEMS TECHNICIAN ACADEMY 7107 Elm Valley Drive Kalamazoo, MI 49009 Phone: 269.353.1282 Fax: 269.353.1580 careeracademies@kvcc.edu www.kvcc.edu/training MECHATRONIC SYSTEMS
UPPER MILFORD TOWNSHIP DIRECTIONS TO APPLICANTS PUBLIC WORKS MAINTENANCE WORKER. General Description of Duties: Duties and Responsibilities:
UPPER MILFORD TOWNSHIP DIRECTIONS TO APPLICANTS PUBLIC WORKS MAINTENANCE WORKER Upper Milford Township, Lehigh County, PA, is accepting applications for the position of a Public Works Maintenance Worker.
Los Angeles Trade-Technical College Student Employment Center. Electrical Construction and Maintenance. Full Time
Job Title: Electrician Job Number: 1646 Hours/Days: Varies Salary: Approximate Location: San Dimas, CA Maintain current electrician s license or identification card to meet governmental. Assemble, install,
FACILITIES MAINTENANCE WORKER
FACILITIES MAINTENANCE WORKER Summary Statement: Under supervision, is responsible for performing routine building maintenance tasks and assisting Building Maintenance Supervisor with the performance of
NZQA unit standard version 1 Page 1 of 7. Demonstrate knowledge of electromechanical engineering principles for technicians
Page 1 of 7 Title Demonstrate knowledge of electromechanical engineering principles for technicians Level 3 Credits 10 Purpose This unit standard covers fundamental electromechanical engineering principles
Geometry in Construction
Geometry in Construction CTE Industry Sector: Building and Construction Trades Career Pathway: Residential and Commercial Construction Career Pathway Entry-Level Job Titles: Apprentice carpenter, apprentice
Details of Laboratory
Details of Laboratory Strength of Materials Laboratory Strength of materials is one of the core subjects in mechanical engineering. It is the physical science that looks at the reaction of a body to movement
VAAL UNIVERSITY OF TECHNOLOGY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING EXPERIENTIAL LEARNING FUNDAMENTAL LEARNING
VAAL UNIVERSITY OF TECHNOLOGY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING EXPERIENTIAL LEARNING To fulfil the requirements of the National Diploma, a student must complete at least one
Appendix B. Glossary of Steam Turbine Terms
Operator s Guide to General Purpose Steam Turbines: An Overview of Operating Principles, Construction, Best Practices, and Troubleshooting. Robert X. Perez and David W. Lawhon. 2016 Scrivener Publishing
Mechanical Engineering Department
Mechanical Engineering Department Diploma of Mechanical Engineering Curriculum Document Prepared On: 3 rd of February 2016 Revised On: 20 th of February 2018 Curriculum Approved by: ACK College Curriculum
EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works
EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &
AMADOR COUNTY UNIFIED SCHOOL DISTRICT MAINTENANCE WORKER III
DEFINITION Under general supervision, to perform skilled, journey-level maintenance trades work in the repair, maintenance, alteration and new construction of District buildings and equipment; and to perform
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: INT 118 (2011-1) version number (e.g.; INT 100 (2005-1)). Identifier is the postsecondary course
Mechanical Technologist Grade I
Mechanical Technologist Grade I 101. Assist in fabrication used to maintain plant facilities and equipment using the following methods: horizontal welding with acetylene and arc welders heating and cutting
7 th NATIONAL CERTIFICATION EXAMINATION Nov FOR ENERGY MANAGERS & ENERGY AUDITORS
Regn No: Name: (To be written by the candidates) 7 th NATIONAL CERTIFICATION EXAMINATION Nov. 2008 FOR ENERGY MANAGERS & ENERGY AUDITORS PAPER 3: Energy Efficiency in Electrical Utilities Date: 23.11.2008
ESSENTIAL DUTIES AND RESPONSIBILITIES
Job Description Job Title: Department: Location: Reports To: FLSA Status: Maintenance Associate (027) Maintenance (27) Insteel Wire Products, Hickman, KY Maintenance Supervisor Nonexempt SUMMARY Installs,
Certificate of Registration
Certificate of Registration Awarded to: Company Registration number: 910 478 656 Achilles Utilities Nordics & Central Europe hereby confirms that is now fully registered as a supplier in Achilles Nordics
Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
Apprenticeship Training Standard. Schedule of Training. Process Operator Refinery, Chemical and Liquid Processes. Trade Code: 246F
Apprenticeship Training Standard Schedule of Training Process Operator Refinery, Chemical and Liquid Processes Trade Code: 246F Development Date: May 2000 This document is the property of the apprentice
INDUSTRIAL MECHANIC (MILLWRIGHT)
To qualify to challenge certification in this trade or be granted authority to supervise and sign-off on apprentices in this trade, individuals must have: worked a minimum of 9,540 hours performing the
APPLIED SKILLED TRADES PROGRAM
NYS & CSEA 2020-2022 APPLIED SKILLED TRADES PROGRAM FOR CSEA-REPRESENTED NYS EMPLOYEES Carpenter Electrician Mason and Plasterer Plumber and Steamfitter www.nyscseapartnership.org Build in-dema nd job
Industrial Education
Mechatronics Program Description Mechatronics is the blending of electronics, mechanics, electrical. and computers to produce a well-rounded technician capable of handling the complex maintenance and operations
Cleans, maintains, repairs, and overhauls water and wastewater plant, pumping, treatment and all other associated mechanical equipment.
Job Title: Maintenance Technician/Plant Operator Reports To: Operations Manager FLSA Status: Non-exempt Date: July 21, 2015 Maintenance Technician/Plant Operator Job Summary: Under the general supervision
STEAMFITTER / PIPEFITTER
STEAMFITTER / PIPEFITTER PROGRAM OBJECTIVES The Steamfitter/Pipefitter program at Eastern College, is designed to provide students with the high quality training necessary to start their career in the
Agricultural Systems Technology I
EXAM INFORMATION Items 44 Points 73 Prerequisites NONE Course Length ONE YEAR Career Cluster AGRICULTURE, FOOD AND NATURAL RESOURCES SCIENCE, TECHNOLOGY, ENGINEERING, AND MATHEMATICS Performance Standards
CARPENTER. - Education Opportunities: High school programs, technical schools, community colleges, registered apprenticeships and industry training.
CARPENTER $12.35(entry level) - $29.44(experienced) / hourly Carpenters make, on average, $40,000 per year. Carpenters work on every type of construction project. Although additional training may be necessary,
El Dorado Union High School District Educational Services. Course of Study Information Page
Course of Study Information Page Course Title: Introduction to Construction Technology (#0526) Rationale: This is an introduction into the world of construction where the student will learn the basics
MECHANIC/SENIOR MECHANIC
DECEMBER 2018 FLSA: NON-EXEMPT MECHANIC/SENIOR MECHANIC This class specification indicates, in general terms, the type and level of work performed as well as the responsibilities of employees in this classification.
Table of Contents. A Operate and monitor Micro Hydel Power Plant (MHP) plant 04
Page 2 Table of Contents Competency Standards A Operate and monitor Micro Hydel Power Plant (MHP) plant 04 B Carry out corrective maintenance procedures on electrical components in a MHP plant 05 C Carry
CTE - CIP Course Details Catalog
Status: Open Start Year: 2011 End Year: Group 1 Minimum Carnegie Units: 2.00 Minimum Course Selection: School: 1 ACC: 0 Regional: 0 13052A001 Production Technology 1.00 2011 11002A001 Communication Technology
40 CFR Part 63, Subpart XXXXXX, (6X Area Source NESHAP)
40 CFR Part 63, Subpart XXXXXX, (6X Area Source NESHAP) http://www.iowadnr.gov/air/prof/neshap/ Background of the 6X rule Applicability Facilities covered by rule SIC/NAICS codes Examples of types of facilities
This position is driving essential (see driving requirements below).
Page 1 of 5 CITY OF CASPER invites applications for the position of: Plant Mechanic I SALARY: $19.72 - $23.96 Hourly $3,418.13 - $4,153.07 Monthly $41,017.60 - $49,836.80 Annually OPENING DATE: 08/18/16
ebook: USING ULTRASOUND TO ENHANCE ENERGY EFFICIENCY
ebook: USING ULTRASOUND TO ENHANCE ENERGY EFFICIENCY TABLE OF CONTENTS 01 01 02 03 04 05 06 07 08 09 10 11 FOCUS ON CARBON EMISSIONS WHAT S BEING DONE? EPA STEPS IN AN INDUSTRY-WIDE EFFORT HOW A RELIABILITY
Name of the Department: Mechanical Engineering. Semester: III rd Semester. Laboratory Name: Manufacturing Process- I
Name of the Department: Mechanical Engineering Semester: III rd Semester Laboratory Name: Manufacturing Process- I 1. Study of Cupola furnace. 2. Study of Moulding techniques. 3. Study of Casting process.
ELEC / ELEX COMMITTEE Fiber Optic Component; remove, relocate, repair, and install Electronic Equipment; repair Rotating
ELEC / ELEX COMMITTEE 009-123 Fiber Optic Component; remove, relocate, repair, and install 009-16 Electronic Equipment; repair 009-17 Rotating Electrical Equipment; repair 009-33 Rotating Electrical Equipment;
List of forms CLAP with correspondence WGP /68/UE
List of forms CLAP with correspondence WGP - 204/68/UE CLAP number CLAP version Adopted by CLAP Subject WGP number Adopted by WGP X00 /03/205 Equipment covered by the regulations on transport of dangerous
#287 FOOD GRADE FLUSHING AGENT
#287 FOOD GRADE FLUSHING AGENT Food Grade Flushing Agent is a non-toxic, non-drying, anti-wear flushing and cleaning lubricant that can be used to clean and flush all types of processing and packaging
Brazosport College. Syllabus for PTAC Process Technology I Equipment
Brazosport College Syllabus for PTAC 1410 - Process Technology I Equipment Instructor: Gregg Curry Office Phone: N/A Alt. Phone: 979.230.3618 Office: N/A email: gregg.curry@brazosport.edu I. COURSE DESCRIPTION
NAVSEA STANDARD ITEM NUMERICAL INDEX
NAVSEA STANDARD ITEM NUMERICAL INDEX FY-18(CH-2) ITEM NO. 009-01 General Criteria; 009-02 Environmental Compliance Report for Material Usage at Naval Facility; 009-03 Toxic and Hazardous Substance; control
List of forms CLAP with correspondence WGP - 97/23/EC
List of forms CLAP with correspondence WGP - 9723EC CLAP number CLAP version Adopted by CLAP Subject WGP number Adopted by WGP 1 9 07092004 ESR on manufacturing - Welded tubes 725 07092004 2 4 26012006
8367 TRANSPORTATION WORKER 3
TRANSPTATION WKER 3 Nature of Work Under limited supervision, at the journey level performs skilled work in the construction and maintenance of highways, related buildings and structures, and erecting
Construction Technology. Broadbased Courses
Construction Technology Broadbased Courses TCJ3E Construction Technology, Grade 11, Workplace Preparation Name: This job may allow employees to develop technical knowledge and skills related to carpentry,
Minnesota FFA Agricultural Technology & Mechanical Systems Career Development Event General Information
Minnesota FFA Agricultural Technology & Mechanical Systems Career Development Event 2016-2021 General Information The CDE will include the five recognized areas of subject matter in agricultural mechanics:
LAS VEGAS - CLARK COUNTY LIBRARY DISTRICT
(Range 117) DEFINITION Performs a variety of fundamental and skilled work in the building and mechanical trades, with an emphasis in heating, ventilation and air conditioning (HVAC) equipment, in order
Construction and Manufacturing Technology
The Construction Technology program provides preparation for a wide variety of positions in the construction field as a contractor, supervisor, building inspector or tradesperson. The program offers the
Building Operator Level 3 Introduction to Building Operations
Comp # Type Competency Statement Competency Detail 43659 Safety Describe basic lock out/tag out procedures 43660 Safety 43661 Safety 43662 Safety Building Operator Level 3 Introduction to Building Operations
Date: May 21, 2010 Code: HR Overview
Office of the Chancellor 401 Golden Shore, 4 th Floor Long Beach, CA 90802-4210 562-951-4411 email: hradmin@calstate.edu Date: May 21, 2010 Code: HR 2010-06 To: From: CSU Presidents Gail E. Brooks Vice
SEMEM SQA Unit Code H2B3 04 Assisting in the installation of mechanical equipment
Overview This unit identifies the competences you need to assist in the installation of mechanical equipment, in accordance with approved procedures. You will be required to assist in the installation
Energy, Power, and Transportation Technology 11
Energy, Power, and Transportation Technology 11 Unifying Concepts By the end of the course, students will be expected to demonstrate an understanding of energy, power, and transportation technology. Students
WITHLACOOCHEE TECHNICAL INSTITUTE Welding Technology J Course Syllabus
WITHLACOOCHEE TECHNICAL INSTITUTE Welding Technology J400400 Course Syllabus Course Description Instruction includes learning experiences in the joining and cutting of metal materials with the different
Preventative Maintenance Program
2012 Preventative Maintenance Program Chinook Drilling 8/10/2012 2 3 Table of Contents 117.0 Preventative Maintenance Program...4 118.0 Mission Statement...5 119.0 Overall Objectives...5 120.0 Manufactures
Pre Calculus in Construction
Pre Calculus in Construction CTE Industry Sector: Building and Construction Trades Career Pathway: Residential and Commercial Construction Career Pathway Entry-Level Job Titles: Apprentice carpenter, apprentice
u m p a n d u m p i n g y s t e m p e c i a l i s t s i n c e
P P S S S u m p a n d u m p i n g y s t e m p e c i a l i s t s i n c e 1 9 6 2 Ft Worth Waco Austin Houston San Antonio 2 3 Vertical Turbine Fabricated Steel Components Smith Pump specializes in engineered
Choosing Skills to Train By Michael V. Brown, President of New Standard Institute
Choosing Skills to Train By Michael V. Brown, President of New Standard Institute Effective management of people always involves training. This training can be as simple as one-on-one in the field or as
GENERAL QUESTIONS # QUESTION AVAILABLE RESPONSES 2045 Which of the following best describes the highest level of education you have completed?
SCREENING QUESTIONS Screening questions can be used in TAM to screen for minimum and preferred qualifications. The lists below comprise screening questions that are already available for use in TAM. If
Practical Skills/Experience Sign-Off Document. Zip Line Mechanics (Under Ontario Regulation 187/03, Technical Standards and Safety Act, 2000)
Practical Skills/Experience Sign-Off Document with respect to: s (Under Ontario Regulation 187/03, Technical Standards and Safety Act, 2000) Document Uncontrolled if Printed Mechanic-In-Training Information:
Electrical Craft Helper (Class Code 3799) Task List. Installation
Electrical Craft Helper (Class Code 3799) Task List Installation 1. Assists in the installation of electrical equipment, power, lighting, and control circuits in water works installations and structures.
WELDING CLASS DESCRIPTIONS NEW STUDENTS may take any of the first four classes listed below These classes have NO Prerequisite Requirements.
WELDING CLASS DESCRIPTIONS NEW STUDENTS may take any of the first four classes listed below These classes have NO Prerequisite Requirements. At Cerritos College, previous course enrollment is reviewed
Performance Verification Packet INDUSTRIAL MAINTENANCE SUPPORT MECHANIC
Performance Verification Packet INDUSTRIAL MAINTENANCE SUPPORT MECHANIC This performance verification is designed as one method to evaluate job skills and safe work habits of a participant. The performance
... TEL: FAX:
PIONEER SMITH GROUP... TEL: +607-596 4070 FAX: +607-596 4071 TABLE OF CONTENT 01 INTRODUCTION OF COMPANY 02 MONITORING & MANAGEMENT COMMITTEE 03 NATURE OF BUSINESS 04 YARD LAYOUT 05 YARD FACILITIES 06
RRB ALP & Technician Stage II Exam Pattern & Syllabus 2018
RRB ALP & Technician Stage II Exam Pattern & Syllabus 2018 www.wifistudy.com RRB ALP Stage II Syllabus 2018 Mathematics General Intelligence and Reasoning Basic Science and Engineering General Awareness
LAS VEGAS - CLARK COUNTY LIBRARY DISTRICT
(Range 125) DEFINITION Supervises, plans, coordinates, performs, and manages the work of maintenance staff and outside contractors to ensure the overall physical integrity of all District facilities. This
NCCER Progress Blvd, Alachua, Florida Phone: (888)
NCCER 13614 Progress Blvd, Alachua, Florida 32615 Phone: (888) 622-3720 E-mail: info@nccer.org FIELD SAFETY Competencies/Objectives MODULE 75101-03 INTRODUCTION TO SAFETY 1. Explain the difference between
Course Catalog. A service of:
Course Catalog Advanced Industrial Hydraulics Advanced Industrial Pneumatics Arc Flash Electrical Safe Work Practices (ESWP) Basic Electricity for Mechanics Basic Industrial Hydraulics Basic Industrial
LUBRICANTS AND SURFACE TREATMENTS
LUBRICANTS AND SURFACE TREATMENTS GREASES ASSEMBLY PASTES OILS SURFACE TREATMENTS LOCTITE LUBRICANTS THE ULTIMATE ANSWER TO YOUR LUBRICATION PROBLEMS LUBRICANTS AND SURFACE TREATMENTS CONTENTS INTRODUCTION