UPDATED. High Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making. Features & Benefits:

Transcription

1 High Productivity, Quick Change, ipped Drills for Large Diameter Hole Making Ingersoll has introduced a new drilling line for large diameter hole applications. he Spadewist, with an optimized cutting edge and unique rigid clamping, generates high productivity and outstanding performance. Diameters: Metric: 26.0mm mm (.1mm increments) 33.0mm mm (.5mm increments) Unique clamping technology enables customers to quickly change drill heads without removing the clamping screw, hence greatly reducing tool setting time and also machine down time. Furthermore, the asymmetrical bottom shape design means error proof insert setting, improved tool accuracy and repeatability. Inch: (every 1/32 ) Bodies: Weldon Shank Length to Diameter Ratio: 3xD and 5xD Geometry: P - Steel & General Purpose Grade: IN2505 UPDAED Features & Benefits: Unique quick change clamping system - No need to remove the insert screw from the holder to change the head 2 effective cutting edges for higher productivity Self centering design means no need for a pilot hole Easier replacement of the drill head in the machine Asymmetrical pocket design for error proof mounting, close tolerance and excellent surface finish Stronger rigidity of the unique screw clamp design means improved productivity hrough coolant hole Drill diameter range : 26.0mm 32.9mm (every 0.1mm), 33.0mm 41.0mm (every 0.5mm) and (every 1/32 ) Drill Body(L/D) : 3xD, 5xD Also available tailor-made items PAGE 1 OF 10

2 Internal coolant supply Smooth chip evacuation Improved body rigidity Error-proof x y Asymmetrical seat design H.A Wide contact area Standard helix angle DRILL HEAD CHANGING INSRUCIONS o unclamp, rotate the screw 3-5 times counter-clockwise No need to remove the screw from the body PAGE 2 OF 10

3 RECOMMEMDED COOLAN PRESSURE & VOLUME Coolant pressure (PSI) Optimal Good Minimum Coolant volume (gal/min) Optimal Good Minimum " 1.181" 1.378" 1.614" 1.024" 1.181" 1.378" 1.614" Diameter(in) Diameter(in) CASE SUDY 1 Ingersoll Machine Vertical machining center (Spindle: B50) Coolant Internal (145 PSI) Material Alloy steel (SAE 4340) Drill LD N6R01 Head LPA2600R01 IN2505 Cutting speed V (SFM) 250 Feed rate F (IPR) Hole depth (inch) 5.12 (hrough hole) Hole size (inch) Surface roughness (Ra) Chip shape Surface finish PAGE 3 OF 10

4 CASE SUDY 2 Ingersoll Machine Vertical machining center (Spindle : B50) Coolant Internal (145 PSI) Material Alloy Steel (SAE 4340) Drill LD N6R01 Head LPA3800R01 IN2505 Cutting speed V (SFM) 250 Feed rate F (IPR) Hole depth (inch) 5.12 (hrough hole) Hole size (inch) Surface roughness (Ra) Chip shape Surface finish CASE SUDY 3 Competitor Ingersoll Machine Vertical machining center (Spindle : B50) Coolant Internal (145 PSI) Material Alloy steel (SAE 4340) Drill , 5xD LD N6R01 Head , head type LPA2600R01 IN2505 Cutting speed V (SFM) 300 Feed rate F (IPR) Hole depth (inch) 5.12 (hrough hole) ool life (inch) ool life increased by 30% Competitor Ingersoll PAGE 4 OF 10

5 3XD Drill body - Weldon type shank (inch) WPH09 - WPH12 D1 (h7) D2 D3 13 L1 ød L2 L4 L3 Drill Body D1 ip Range D2 D3 L1 L2 L3 L4 Pocket Metric Inch Shank Dia Flange Dia Max DOC Ext from Hldr OAL Shank Lgth Size LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R SPARE PARS Drill Body Locking Screw orque Spec (in-lbs) Driver Handle Coolant Plug LD D S50230D3 44 BLD 20/S7 SW6- Short PF-0013 LD D S50250D35 48 BLD 25/S7 SW6- Short PF-0013 LD D S60265D4 53 BLD 25/S7 SW6- Short PF-0013 LD D S60285D42 53 BLD 25/S7 SW6- Short PF-0013 LD D S60320D5 53 BLD 25/S7 SW6- Short PF-0013 LD D S80340D6 62 BLD 25/S7 SW6- Short PF-0013 PAGE 5 OF 10

6 5XD Drill body - Weldon type shank (inch) WPH09 - WPH12 D1 (h7) D2 D3 13 L1 ød L2 L4 L3 Drill Body D1 ip Range D2 D3 L1 L2 L3 L4 Pocket Metric Inch Shank Dia Flange Dia Max DOC Ext from Hldr OAL Shank Lgth Size LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R LD N6R SPARE PARS Drill Body Locking Screw orque Spec (in-lbs) Driver Handle Coolant Plug LD D S50230D3 44 BLD 20/S7 SW6- Short PF-0013 LD D S50250D35 48 BLD 25/S7 SW6- Short PF-0013 LD D S60265D4 53 BLD 25/S7 SW6- Short PF-0013 LD D S60285D42 53 BLD 25/S7 SW6- Short PF-0013 LD D S60320D5 53 BLD 25/S7 SW6- Short PF-0013 LD D S80340D6 62 BLD 25/S7 SW6- Short PF-0013 PAGE 6 OF 10

7 DRILL HEADS WPH09 - WPH12 140º D 13 ød L Drill ips Metric D ip Range Inch L Pocket Size Grade LPA2600R IN2505 LPA2610R IN2505 LPA2620R IN2505 LPA2630R IN2505 LPA2640R IN2505 LPA2650R IN2505 LPA2660R IN2505 LPA2670R IN2505 LPA2680R IN2505 LPA2690R IN2505 LPA2700R IN2505 LPA2710R IN2505 LPA2720R IN2505 LPA2730R IN2505 LPA2740R IN2505 LPA2750R IN2505 LPA2760R IN2505 LPA2770R IN2505 LPA2780R IN2505 LPA2790R IN2505 LPA2800R IN2505 LPA2810R IN2505 LPA2820R IN2505 LPA2830R IN2505 LPA2840R IN2505 LPA2850R IN2505 LPA2860R IN2505 LPA2870R IN2505 LPA2880R IN2505 LPA2890R IN2505 LPA2900R IN2505 LPA2910R IN2505 LPA2920R IN2505 LPA2930R IN2505 LPA2940R IN2505 LPA2950R IN2505 LPA2960R IN2505 PAGE 7 OF 10

8 DRILL HEADS WPH09 - WPH12 140º D 13 ød L Drill ips Metric D ip Range Inch L Pocket Size Grade LPA2970R IN2505 LPA2980R IN2505 LPA2990R IN2505 LPA3000R IN2505 LPA3010R IN2505 LPA3020R IN2505 LPA3030R IN2505 LPA3040R IN2505 LPA3050R IN2505 LPA3060R IN2505 LPA3070R IN2505 LPA3080R IN2505 LPA3090R IN2505 LPA3100R IN2505 LPA3110R IN2505 LPA3120R IN2505 LPA3130R IN2505 LPA3140R IN2505 LPA3150R IN2505 LPA3160R IN2505 LPA3170R IN2505 LPA3180R IN2505 LPA3190R IN2505 LPA3200R IN2505 LPA3210R IN2505 LPA3220R IN2505 LPA3230R IN2505 LPA3240R IN2505 LPA3250R IN2505 LPA3260R IN2505 LPA3270R IN2505 LPA3280R IN2505 LPA3290R IN2505 LPA3300R IN2505 LPA3330R IN2505 LPA3350R IN2505 LPA3400R IN2505 PAGE 8 OF 10

9 DRILL HEADS WPH09 - WPH12 140º D 13 ød L Drill ips Metric D ip Range Inch L Pocket Size Grade LPA3410R IN2505 LPA3450R IN2505 LPA3490R IN2505 LPA3500R IN2505 LPA3550R IN2505 LPA3570R IN2505 LPA3600R IN2505 LPA3650R IN2505 LPA3700R IN2505 LPA3730R IN2505 LPA3750R IN2505 LPA3800R IN2505 LPA3810R IN2505 LPA3850R IN2505 LPA3890R IN2505 LPA3900R IN2505 LPA3950R IN2505 LPA3970R IN2505 LPA4000R IN2505 LPA4050R IN2505 LPA4100R IN2505 LPA4130R IN2505 PAGE 9 OF 10

10 OPERAING PARAMEERS ISO Material Condition P M K N S H Non-alloy steel <0.25% C & cast steel, > = 0.25% C free cutting steel <0.55% C > = 0.55% C ensile Strength RM (N/mm2) Hardness (HB) Matl No. Cutting Speed VC (SFM) Annealed Annealed Quenched & empered Annealed Quenched & empered Ø mm ( ) Feed vs. Drill Diameter Ø mm ( ) IPR (inches/rev) Ø mm ( ) Annealed Low alloy steel & cast steel (less than 5% alloying Quenched & empered elements) High alloy steel, cast steel Annealed & tool steel Quenched & empered Ferritic/martensitic Stainless stl & Martensitic cast stainless stl Austenitic GreyCast Iron Ferritic (GG) Pearlitic Cast Iron Nodular Ferritic (GGG) Pearlitic Malleable Cast Iron Ferritic Pearlitic Aluminum - wrought alloy Not cureable Cured Aluminum - <=12% Si Not cureable cast, alloyed Cured >12% Si High temperature Free cutting > 1% Pb Brass Copper alloys Electrolitic copper Non-metallic Duro & fiber plastics Hard rubber Annealed Fe based Cured High temp.alloys Annealed Ni or Co Cured based Cast itanium, i alloys - Rm Alpha+beta alloys cured Rm Hardened steel Hardened - 55 HRC Hardened - 60 HRC Chilled cast iron Cast Cast iron nodular Hardened - 55 HRC * Feed Rates are Based on wo Effective - DO NO DOUBLE PAGE 10 OF 10