The New page in PU Foam age

Transcription

1 The New page in PU Foam age

2

3 The New Page In PU Foam Age The non-uniformity of structure, fast destruction and darkening due to exposure to sun light causing a yellow color, are all factors associated with existing PU foams. It is time to start with a clean slate. With WhiteTeq Technology, Ceresit opens up a new page in the history of PU foam. The Ceresit WhiteTeq Insulation foams radically differ from what one is used to working with so far. By changing the product technology, shortcomings of existing PU foams were solved and unseen unique properties were achieved. Superior fine-cell structure Highest resistance to sunlight Enhanced durability and elasticity Increased reliability and longevity 1

4 New Technology New Properties 1. New Superior Fine-Cell Structure No plasticizers 4 times more cells per cm 3 Structure means order and uniformity. The structure of regular PU foams typically contains random combination of large voids and pores, depending on the quality level and working conditions. These large voids quickly conduct thermal energy and strongly contribute to a loss of heat. Perfectly even structure (red) Perfectly even structure (red) Bigger voides (violet) Bigger voides (violet) Regular PU Foam with low dense and litlle uniform cell structure Ceresit WhiteTeq with 4 times more cells per cm 3 and the new level of more uniform cell structure Ceresit sets a new standard, becoming the true benchmark of a uniform foam structure. Foams developed based on the unique WhiteTeq Technology differ from its predecessors on a molecular level as it does not require plasticizers. This results in a much more dense polymeric cell structure with 4 times more cells per cm 3. Due to the fact that the foam structure has become more uniform, it achieves a brand new level of thermal efficiency and internal structural strength. 2

5 2. The Ice-White Color As A New Indicator Of Quality Increased ingredients purification rate Regular PU foams are based on technical grade ingredients, which create a typically seen light yellowish color. The color of the Ceresit WhiteTeq has an entirely different reason. The icewhite color of the new Ceresit WhiteTeq is derived from its particular polymer purification process which takes out any impurities. Thus achieving its color without the need of any colorants. Regular PU Foam: produced with a standard technical grade. Ceresit WhiteTeq: based on purified and concentrated ingredients. Being determined by the technology alone, the ice-white color as a new indicator of quality. 3. New Standard In UV Light Resistance It is common knowledge that prolonged exposure to sun light leads to a gradual darkening of PU foams, as seen in those in today s PU foam market. The darkened layers become brittle and completely lose their functions. The new WhiteTeq Technology was formulated with 10 times stronger protective features against UV light. It s unprecedented ultraviolet resistance significantly reduces foam brittleness and darkening, guaranteeing prolonged retainment of insulation qualities.* Regular PU Foam Ceresit WhiteTeq * It is still recommended to apply a coating to the insulating foam to ensure durable protection. 10 times higher resistance to UV light Enhanced UV protective features for 10 times less brittleness and darkening ensure a long lasting, effective insulation. 3

6 The New Age Of Packaging The quality of PU foam is affected by numerous factors from environmental conditions to the user s working behaviour. Ceresit challenged itself to create a way to control one of the most important factors the temperature of the foam in the can. This factor has big influence on the foam s quality and usability. So far no effective tools for controlling a can s temperature were available. Ceresit presents the new and advanced packaging featuring the WhiteTeq Temperature Indicator. It demonstrates that the can content has reached the optimal temperature range for excellent foaming results or alerts if the can temperature exceeds it s minimum temperature with a blue snowflake appearing. Ready to use Warm can up WhiteTeq Temperature Indicator Provides an ease in following the compliance technology Gives maximum assurance in insulation jobs Minimizes the probability of material wastage and time spent Ensures excellent results 4

7 Ceresit WhiteTeq Thermal & Sound Insulation Let s Step Into The New Era Of Insulation Ceresit believes that in order to comply with the challenges of the upcoming energy-saving demands, a sole function of being a filling material is no longer sufficient. This is why Ceresit is bringing the specially developed insulation foams, based on the new WhiteTeq Technology to the market. In addition to all unique advantages, Ceresit WhiteTeq Thermal & Sound Insulation features high-end insulation capacities being less sensitive to the user s working behavior and experience. The principal performance indicators have improved drastically. Improved heat insulation qualities Improved sound reduction level Increased elasticity & durability More safety against the deformation of frames 5

8 Ceresit WhiteTeq Thermal & Sound Insulation 20% Higher Thermal Insulation Some PU foams may show weak thermal capacities derived from poor structure which may lead to heat loss, condensation and crack formation. Outside: cold Regular PU Foam Non Uniform Structure >> Large cells and voids allow cold air to penetrate the inside >> Worse insulation Outside: cold Ceresit WhiteTeq Thermal & Sound Insulation Superior Fine Cell Structure >> Diminishes cold air >> Improved insulation Due to the superior fine-cell structure, the heat insulation qualities of the new Ceresit WhiteTeq Thermal & Sound Insulation foam have improved by 20% in comparison to conventional PU foams. This means there is a maximum extension of operation time for the nodes installed, as well as a significant saving of heat energy and monetary expenses. 50% Better Sound Reduction Conventional PU foams are typically not optimized for noise reduction. This becomes an issue for construction projects implemented in areas of dense urban development and places with a lot of noise pollution, such as airports, railway stations and streets. Regular PU Foam Standart sound reduction Ceresit WhiteTeq Thermal & Sound Insulation 50% BETTER sound reduction Ceresit WhiteTeq Thermal & Sound Insulation was specially designed for insulation purposes and obtains up to 63 db that is 50% higher protection than the usual level. This minimizes a noise pollution and guarantees comfortable living conditions, even in the busiest areas. 6

9 25% Movement Flexibility Existing PU foams may not be forgiving when it comes to repeated mechanical stresses, such as the constant opening and closing of windows, doors, and thermal pressures coming from frequent changes in temperature. This may result in cracks in the foam structure, which jeopardizes its insulation properties. The major reason for this is a lack of elasticity. In order to resist mechanical stress and keep its full insulation capacities in the long-run, Ceresit WhiteTeq Thermal & Sound Insulation was developed with an improved elasticity coefficient to reach more than 25% movement flexibility. This ensures the stability of sound and heat insulation qualities, as well as resistance to repeated mechanical and thermal impacts. This ensures a constant level of comfort during the longer life cycle. Regular PU Foam Rigid >> Cracks >> Heatloss >> Rising Energy cost Ceresit WhiteTeq Thermal & Sound Insulation Flexible >> No cracks >> No heatloss >> No rising energy cost Up To 5x Lower Curing Pressure It can happen that one faces the problem that freshly installed windows and doors can hardly be opened. The main reason is the deformation of their frames, which is caused by the high curing pressure, that PU foams generate during the hardening process. This effect is impossible to foresee. With Ceresit WhiteTeq Thermal & Sound Insulation, deformation is no longer a threat. It s hardening pressure is up to 5 times lower than that of any conventional PU foams, which reduces the risk of damage to adjacent objects (window frames, door jambs, etc.) to an absolute minimum. You can be confident that you will obtain perfect insulation results. Regular PU Foam Deformation and cracks Ceresit WhiteTeq Thermal & Sound Insulation No deformation 7

10 Five Steps To Ensure Excellent Results 1 Substrates must be stable, clean and free of substances likely to impair adhesion. The surfaces can be moist, but not frosted or iced. Mask adjacent areas with foil. 2 Applicable environment temperature of this product lasts from 5 C to + 35 C. 3 Warm can up Ready to use Keeping the can temperature between + 5 C and + 30 C is a must. Check the can temperature by using WhiteTeq Temperature Indicator on the front of the can. If a blue snowflake appears, the can and its content exceed their minimum temperature and must be warmed up in a warm room or in warm water. Afterwards shake the can for approximately 15 seconds and check the indicator again after 2 minutes. If the WhiteTeq Temperature Indicator remains blue, further warming up is needed. If the blue snowflake disappears, the Ceresit WhiteTeq Thermal & Sound Insulation foam is ready for use. For best results keep the can at room temperature during application. 4 5 Shake the can up and down vigorously about 20 times. Remove the plastic cap from the can and screw the adapter tightly onto the screw head of the valve. When working always make sure to keep the can upside down. Recommended application areas Insulation of window frames Insulation of door frames Sealing of openings in roof constructions and insulation materials Creating soundproof screens Insulating of wall panels & roof tiles Filling of cavities and many more 8

11 The Reasons To Try WhiteTeq Never before has working with foam been so easy and the results so immaculate. The WhiteTeq foam optimizes the work process and minimizes any expenses. However, its amazing qualities persist long after. Thanks to WhiteTeq, renovation is now made to last, and the room becomes truly comfortable and environmentally safe. The new-generation WhiteTeq foams: a new benchmark for quality work, a new benchmark for quality life.

12 Henkel CEE, Erdbergstraße 29, A-1030 Vienna, Austria