QR201 2D barcode scanner User manual

Transcription

1 QR201 2D barcode scanner User manual Dear customer, thank you for buying one of the product of HCP company. Before first use, read this notice carefully and if you have any doubts, please contact our authorized service. Sincerely, HCP d.o.o.

2 About device QR201 is a 2D barcode scanner with barcode module of reputable, worldwide known manufacturer Opticon. It supports standard 1D and 2D barcodes. 1. Package contents 1. QR201 barcode scanner (USB version QR201U) 2. USB cable (USB type A - RJ45) 3. User manual 4. CD with drivers 2. Technical characteristics Communication interface USB (COM & HID) Scan speed 60 fps Light source type Green LED + Red LED Scan mode CMOS sensor 752x480 Reading resolution 0.127mm Scan angle -45 up to 0, 0 up to +45 Power supply 5V Working current max 300mA Working temperature -20 up to Supported 1D and 2D barcode types 1D: JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93, Code 128, GS1-128 (EAN-128), GS1 DataBar (RSS), IATA, Industrial 2of5, Interleaved 2of5, ISBN, ISMN, ISSN, Matrix 2of5, MSI/Plessey, S-code, Telepen, Tri-Optic, UK/Plessey. Postal Code: Chinese post, intelligent Mail Barcode, Korean postal authority code, POSTNET. 2D: Aztec code, Aztec Runes, Chinese Sensible code, Codablock F, Composite codes, Data Matrix (ECC200/EC0-140), Maxi Code (mode 2~5), MicroPDF417, Micro QR code, PDF417, QR code. 2 od 10

3 4. Review device 5. Connect the communication cable 3 od 10

4 6. PC connectivity 7. Tips for scanning barcode It is recommended that the barcode symbols scanned under angle less than or greather than 90. Also, avoing scanning too close. 4 od 10

5 8. Adjust the barcode scanner NOTE For advanced settings QR201 used applications UniversalMenuTool2D. QR201 can connect to PC as a HID device (as a standard PC keyboard without installing drivers) or as open COM port on the computer for which it is necessary to install the appropriate drivers. Drivers are on CD that goes with the device or you can downloaded it from website or from forum If you want to QR201 connect to the computer on open COM port, you need to scann 2D barcode bellow which writes USB-COM (it is necessary install drivers from CD) and if you want to QR201 connect as a HID device, you need to scann 2D barcode bellow which writes USB-HID. 5 od 10

6 Adjustment procedure barcode scanner: 1. scan the barcode symbol SET 2. scan the desired setting 3. scan the barcode symbol END 8.1. Automatic scanning QR201 has the ability to work in automatic mode when we put barcode scanning product, barcode scan automatically scans without pressing buttons. Activating this mode is done by scanning the barcode in the table below. The order of scanning for turn on automatic mode is: 1. scan the barcode SET 2. scan the barcode Turn on automatic scan 3. scan the barcode END The order of scanning for turn off automatic mode is: 1. scann the barcode SET 2. scan the barcode Turn off automatic scan 3. scan the barcode END SET Turn on automatic scan Turn off automatic scan END 6 od 10

7 8.1 Setting piezo speaker SET Turn off Turn on Volume: quiet Volume: medium Volume: high Volume: loud END 7 od 10

8 8.2 Adjusting the light indication SET Turn off Turn on Duration: 0,2s END 8 od 10

9 10. Pin layout USB type A RJ45 Pin USB type A 1 Vcc_USB 2 USB_D- 3 USB_D+ 4 GND Pin RJ45 on QR201U GND 6 GND 7 USB_D+ 8 USB_D- 9 Vcc_USB 10-9 od 10

10 NOTE: Only use the cables that come with the device QR201! NOTE: In case of any failure you should contact the nearest authorized service center. HCP d.o.o is not responsible for any damage caused by improper use of the device, (physical damage of the monitor housing) using spare parts that are not original or interventions by unauthorized persons. It is forbidden and dangerous to inject any kind of things and liquid into the device. HCP d.o.o reserves the right to make changes in specifications and other information contained in this document without notice, and users should be consulted in all cases HCP to determine whether any such changes made. HCP shall not be liable for technical or editorial errors or omissions contained in this document: nor for incidental or consequential damages incurred when using this guide. This document contains information on safety that is protected by copyright. All Rights Reserved. No part of this document may be photocopied, reproduced or translated into another language without the prior written consent of HCP. For more information about products visit website Additional documentation about the devices can be found on our forum For technical assistance, contact us at 10 od 10