The Cascades RESIDENTIAL BUILDING & DESIGN GUIDE

Transcription

1 The Cascades RESIDENTIAL BUILDING & DESIGN GUIDE SEPTEMBER 2016

2 08/09/16

3 CONTENTS 1. OVERVIEW 4 2. APPROVAL OF AUTHORITIES 4 3. DESIGN APPROVAL PROCESS 4 4. APPLICATION REQUIREMENTS 4 5. DESIGN AND SITTING REQUIREMENTS 5 6. BUILDING MATERIALS 7 7. SHEDS AND OUTBUILDINGS 7 8. FENCES 8 9. RETAINING WALLS LANDSCAPING & DRIVEWAYS SIGNS TEMPORARY STRUCTURES RELOCATED BUILDINGS CONSTRUCTION FIBRE-TO-THE-HOME TIDINESS DEVELOPMENT APPLICATIONS ALTERATION TO DESIGN GUIDE SALE BY OWNER MERGER PERFORMANCE BOND DEFINITIONS 11 APPENDICES APPENDIX A HOME DESIGN STANDARDS APPLICATION FORM 15 APPENDIX B APPLICATION REQUIREMENTS CHECKLIST 17 APPENDIX C PERFORMANCE BOND REFUND APPLICATION FORM 19

4 1. OVERVIEW The Forest Springs Residential Building and Design Guidelines (Design Guide) have been created to encourage the construction of a diverse, interesting, and vibrant modern community with quality homes and streetscapes. Through compliance with the Design Guide you and your neighbours will further enhance the community in which you have chosen to build your new home. The Design Guide forms part of your purchase contract. All Owners of Lots in this development must comply with this Design Guide. Compliance with the Design Guide is required in order for you to claim the return of a $2,500 Performance Bond which was included in your purchase price, and held by the developer. 2. APPROVAL OF AUTHORITIES 2.1 The Design Guide is complimentary to statutory requirements. Compliance with this Design Guide does not exempt your building works from compliance with local or any other authority s requirements. Compliance with this Design Guide does not imply that all local or any other authority s requirements have been satisfied. 3. DESIGN APPROVAL PROCESS 3.1 Before undertaking any building work the Owner must first obtain written approval from the Forest Springs Design Guide Review Panel. The steps to undertake this review are as follows: Step 1: Step 2: Step 3: Purchase your Lot Design your dwelling to comply with the Design Guide. Have your Builder or Designer submit your building application and documentation to the Design Guide Review Panel (PDF format) via addressed to design@gladstonedrafting.com.au Step 4: The Design Guide Review Panel will issue an invoice for the review costs and undertake an assessment of your submission. A properly made submission will be completed within 10 business days. Step 5: Step 6: Step 7: Step 8: Step 9: Subject to your application conforming to the Design Guide, written approval is issued by the Design Guide Review Panel. Where not suitably complying, the Design Guide Review Panel will identify the items requiring further consideration. Revised documentation will need to be submitted before approval can be issued. You or your builder should then lodge building plans for local authority approval. Construction of your home may commence in accordance with the Design Guide and local authority approvals. Once your home has been completed you should complete the application for the refund of your Performance Bond and apply to the Design Guide Review Panel for a final inspection. Once a successful final completion inspection has taken place and you have submitted your Performance Bond Return form to the Design Guide Review Panel, your Performance Bond will be returned by the end of the following month. 4. APPLICATION REQUIREMENTS 4.1 Complete your Application Form and Checklist 4.2 Prepare and submit your Building Documentation to the Design Guide Review Panel including drawings (please refer to Application Requirements Checklist at the back of this document). 4.3 The Design Review Panel reserves the right to apply and enforce the Design Guide at their discretion including making variations to the Design Guide and approving non-complying designs. Approval of a non-complying design is specific to that particular application and cannot be construed as: a. Allowing that same design for other applications or; b. A variation of the Design Guide. 4 FOREST SPRINGS ESTATE The Cascades

5 5. DESIGN AND SITTING REQUIREMENTS 5.1 The façade design must differ from the adjoining two properties either side of the lot and across the road. 5.2 Setbacks; The following setbacks apply to lots under 600m 2 in size only. a. Optional Built to Boundary Setback lots have been nominated on the Plan of Reconfiguration approved by the local authorities. A maximum 8m long garage wall may be built on that boundary to a maximum height of 3.5 metres. A zero setback tolerance of 0.2 metres is permitted to allow fascia and gutter overhang parallel to the boundary wall. Where garage walls are built to the boundary no fencing is permitted for the section of wall built to the boundary. b. Have minimum boundary setbacks as detailed below: Lot sizes 450m 2 to 520m 2 Must have a road setback of not less than 3 metres from the outer most projection of the front living; Must have a road setback of not less than 6 metres from the outer most projection of the garage; Where secondary street boundaries are concerned must have a setback of not less than 2 metres to the outer most projection of single storey and 4 metres to wall of second storey. No building or structure over 2 metres in height may be constructed within a 9 metre by 9 metre truncation of the two road frontages. On conventional lots the home must have side boundary setback of not less than 1.5 metres to the outer most projection for single storey homes and not less than 2 metres to the outermost projection to the second storey. LOT SIZE m 2 (15 18m x 25 30m) LOT SIZE m 2 (16m x 30 32m) Residential Building and Design Guide 5

6 Lot sizes 521m 2 to 599m 2 Must have a road setback of not less than 4 metres from the outer most projection of the front living; Must have a road setback of not less than 6 metres from the outer most projection of the garage; Where secondary street boundaries are concerned must have a setback of not less than 2 metres to the outer most projection of single storey and 4 metres to wall of second storey. No building or structure over 2 metres in height may be constructed within a 9 metre by 9 metre truncation of the two road frontages. On conventional lots the home must have side boundary setback of not less than 1.5 metres to the outer most projection for single storey homes and not less than 2 metres to the outermost projection to the second storey. LOT SIZE 521m 2 to 599m 2 (18 22m x 30 35m) c. Contain eaves with a minimum overhang of: Lot sizes 450m 2 to 520m 2 450mm from the wall Lot sizes 520m 2 to 599m 2 600mm from the wall d. Include an attached lock-up garage of the following minimum dimensions. On Lot sizes 450m 2 to 520m 2 Minimum internal measurement of 6 metres x 4.5 metres wide with a minimum garage door width of 4 metres. On Lots sizes 520m 2 to 599m 2 Minimum internal measurement of 6 metres x 5.7 metres wide e. Include a sealed driveway from the street to the garage (in accordance with Clause 10); and f. Be constructed in a proper and workmanlike manner. 5.3 The driveway, garage, fences and any retaining walls must be constructed before the home is occupied. 5.4 The garage of the home must be setback a minimum of 0.75 metres from the front building line (front wall, excluding porch/portico and verandah), so as not to dominate the streetscape. 5.5 The maximum width of a garage should not exceed 50% of the façade of the home. 5.6 Where three garage spaces are proposed, the third garage must be setback 0.75 metres from the main garage line. 5.7 Garage doors facing the street must be panelled or sectional and the colour must compliment the dwelling (Roller doors are not permitted). 5.8 Homes constructed on Corner/Reserve Lots should aim to address the primary AND any secondary frontages including, roads, reserves or public open space. The use of verandahs, porticos, feature windows and other design features that complement the front elevation will help address the corner/reserve. The corner/reserve treatment would ideally return around the corner by a minimum of 2 rooms. Additionally, two storey homes on corner Lots should aim to have all upstairs windows which face the secondary frontage to match the primary frontage windows with head and sill heights aligned and consideration of vertical alignment of windows over both levels. Blank walls to the corner/reserve frontage are not desirable. 6 FOREST SPRINGS ESTATE The Cascades

7 5.9 Satellite dishes and TV aerials must be located within the roof space or mounted at the rear of the house as low as possible on the roof (below ridge line). They must be located to minimize their visual impact. On corner/reserve lots they must be located away from both frontages Fixtures such as external hot water services, heating and cooling units, clothes lines, rainwater tanks, sheds, spa motors and the like must not be visible from any street or public space Meter boxes must be located to minimize their visual impact Roof mounted cooling units must be low profile, coloured to match the roof, be below the ridge line and placed a minimum of half way to the rear of the dwelling and must not be located on the corner/reserve side of the roof Water Storage tanks must not be visible from the street or public areas and must be coloured to match the roof Solar panels must not be visible from public areas unless it is required for orientation and efficiency purposes. Panels must be mounted flat against the roof plane and not elevated on a separate frame Roll down security shutters are not permitted on the façade of the house that is visible from the primary or secondary frontage (forward of the 1.8 metre high corner fence) or any public space Waste pipes and vents must be concealed with in wall cavities on 2 storey dwellings. Exposed plumbing on single storey dwellings must be screened to at least 1.8 metres (i.e. behind boundary fence) Taps in the front yard are to be fixed to the side wall of the dwelling or fence, or adequately screened with landscaping as not to be visible from the street or public space. 6. BUILDING MATERIALS 6.1 The external walls of your home must contain at least two different complimentary wall materials and must only be constructed of: a. Clay brick, clay brick veneer, rendered brick (bagging not allowed), rendered cement block, timber or weathertex; or b. Another material or combination of materials approved by the Design Guide Review Panel. 6.2 Double height face brick or one and a half height brick size is not permitted. 6.3 Any elevations visible from the primary or secondary frontage or any public space must not have lightweight materials (i.e. fibre cement sheeting, painted beams) or similar above windows or doors, including the garage door, unless it is integral with the architectural style of the dwelling. 6.4 Roofs are required to have a roof pitch of at least 22 degrees. Flat roofs will generally not be approved. Innovative roof designs incorporating curved or some flat elements will be assessed on their individual merits. Roofs must be constructed of concrete tile, clay tile or non-reflective Colorbond metal. 6.5 Only new materials must be used. 7. SHEDS AND OUTBUILDINGS 7.1 All outbuildings require the approval of the Forest Springs Design Review Panel prior to construction. Applications for approval must include a site plan showing your shed location in relation to your home, dimensions including heights of walls and roofs, roof pitch and building materials (including colour scheme). All sheds must comply with the local authority s standard requirements. 7.2 Sheds may be constructed of timber, Colorbond, rendered fibre cement or using the same materials and complimentary colours as your home. 7.3 The maximum height of any shed or outbuilding must not project above the dwelling roof height with an absolute maximum of 4.2 metres at the ridgeline with a maximum wall height of 3.3 metres. 7.4 Sheds and outbuildings must be located at the rear of your Lot so that they are not visible from the street or public space as much as practical. Residential Building and Design Guide 7

8 7.5 Sheds must not exceed a maximum size of 42m². 7.6 Sheds on excessive fill will not be permitted with the floor level to be kept as low as practical and to be no higher than 0.5 metres above natural ground line at the highest point. 8. FENCES 8.1 Side and rear boundary fencing must be installed to a height of 1.8 metres and be of Good Neighbour timber paling with capping. (Refer to picture). Colorbond type fencing is not permitted. 8.2 Side fences between adjoining lots must be setback at least 1.0 metre from the front building line of the house and must return at 90 degrees to the boundary to connect with the side of the home (wing fence). The wing fence can be either Good Neighbour style with painted or stained timber, or horizontal battenstyle construction using powder coated aluminium. Where two adjacent buildings have varying setbacks to the road, the fence must be setback 1.0 metre from the building line of the home with the greater setback. 8.3 Front fences are permitted and must: a. Be up to a maximum 1.2 metres in height; b. Be at least 70% transparent; c. Be constructed of timber, steel or aluminium pickets; or d. Have piered brick or masonry posts with timber, steel or aluminium uprights; e. Have a suitable plinth; f. Have a minimum post dimension of 100mm X 100mm. Examples of approved fencing 8.4 Tubular steel or welded steel mesh fencing systems are not permitted. 8.5 Returns from the front fence to the side fence must be constructed in the same style and of the same materials as that of the front fence and must not be erected prior to the front fence being installed. 8.6 The transition between the 1.8 metre high side fence and front fence returns should be stepped at a point behind the building line. 8.7 On corner Lots where a front fence is erected it must be continued around the corner to fully enclose the front and side yard or to join up with the side boundary fence (1.8 metres high Good Neighbour capped timber fencing to maximum 50% of side boundary length). 8.8 Corner Lot fencing must be constructed with no more than 50% of the length of the secondary frontage 1.8m high and must be Capped, Good Neighbour timber paling (as per 8.7) and balance front fencing as (per 8.5). 8.9 Fences erected by the Developer shall not be removed or interfered with by the owner without prior written consent from the Developer The Developer shall not be obliged as an adjoining owner to make any contribution to the Purchaser under the Dividing Fences Act towards any dividing fence This Design Guide does not apply to fencing required by law around swimming pools. 8 FOREST SPRINGS ESTATE The Cascades

9 9. RETAINING WALLS 9.1 Retaining walls must not exceed 1.0m in height unless they are terraced or sloped back to allow for landscaping to break the overall height of the wall. Overall wall heights on retaining walls are not to exceed 1.8m height. 9.2 Plain concrete sleeper retaining walls are not permitted where their height exceeds 200mm and/or are visible from the street or public space. Retaining wall materials permitted include timber, bricks, rendered masonry, stone patterned concrete sleepers and feature stone. 10. LANDSCAPING & DRIVEWAYS 10.1 You must complete your landscaping in a style complimentary to the aesthetic appearance of your home within 4 months of having a Certificate of Classification issued Front garden design of lots should limit the amount of sealed impervious surfaces to a maximum of 50% with the balance being landscaped using trees, shrubs, groundcovers or grass. It should encourage rain water to infiltrate into the garden rather than draining out to the stormwater system and include: a. At least 2 trees, each at a minimum of 2 metres in height with a spacing of 5 10 metres. b. At least one garden bed should have 5 shrubs or trees, each to a height of 1 metre with a planting density of 2 plants per m². c. Smaller plants and ground covers in the balance of garden beds to have a planting density of 4 plants per m². d. Garden beds are to be edged and mulched to a minimum depth of 75mm Consideration should be given to the species and mature size of trees and shrubs relative to the proximity of the house when making your plant selections as not to cause any damage to the house Pebbles can only be used as a feature element in small quantities providing it is in keeping with the overall design philosophy or as an alternative path material. Their colour needs to compliment that of the house Garden design and plant selection should include the use of indigenous and drought tolerant plants where possible and practical. The remainder of the front garden should be turfed Turf should be weed free A-grade green couch or similar. Nature strips (on both primary and secondary street frontages) are to be turfed to the back of kerb by the owners Only one driveway per lot is allowed. Relocation of crossovers is not encouraged, however may be considered only with the prior consent of the Design Guide Review Panel and local authorities. Relocated crossovers will be constructed at the owner s expense in accordance with the local authority s specifications and of the same finish as the original crossover. The existing crossover must be removed and the verge, kerb and footpath (if damaged) reinstated to the same standard as that adjacent at the owners expense Driveways must be constructed from: a. Stamped or patterned coloured concrete; b. Exposed aggregate concrete; 10.9 Plain concrete, painted concrete, stencilled concrete, asphalt driveways and car tracks are not permitted The driveway must be offset from the side boundary by 1.0 metre to provide a landscape strip. (Unless on allocated zero Lot where the driveway must be offset from the side boundary by a minimum of 600mm) Driveway grade should not exceed 1 in 8. Residential Building and Design Guide 9

10 11. SIGNS 11.1 Signs will not be permitted on residential lots with the following exceptions: a. Display home signage on authorised display home sites only. b. Builders or tradespersons identification signage (maximum 1200mm x 900mm) required during dwelling construction. These signs must be removed within 10 days of the completion of construction. The developer reserves the right to remove any signage after this period of time. c. A sign advertising the sale of a vacant lot or completed dwelling with the written approval of the Design Review Manager and provided that the sign is no larger than 1800mm X 900mm. These signs must be removed within 10 days of the property being sold. The developer reserves the right to remove any signage after this period of time. d. Home Occupation Signs will be considered providing that the sign is not larger than 0.2 metres. 12. TEMPORARY STRUCTURES 12.1 Temporary structures must not be erected on the Lot unless associated with the construction of the dwelling and may only be present for the duration of the construction period No temporary buildings, tents or caravans or like structures are to be used as a dwelling or storage. 13. RELOCATED BUILDINGS 13.1 The Purchaser must not relocate any buildings onto the Lot which were previously on other land. 14. CONSTRUCTION 14.1 The Purchaser must: a. Lodge a development application for the dwelling with local authorities within 12 months from the date of settlement of the purchase of the Lot ( Development Application ); b. Begin construction of a dwelling within 1 year from settlement and be completed, including garage, driveway, fencing, front landscaping and retaining walls within 2 years from settlement. c. Not allow more than 3 months to elapse without substantial work being carried out on construction of Improvements on the Lot so that construction/completion can be promptly carried out or reached. 15. FIBRE-TO-THE-HOME 15.1 Telephone and internet services to each home at Forest Springs will be provided by a high speed fibreoptic network in accordance with the Australian Government s Fibre in New developments Policy. It is the responsibility of the Owner and the Builder to adhere to the specifications for the in-home wiring and related broadband infrastructure in order to be able to connect phone and internet services once the home is complete. It is important that your builder is aware of these requirements. Details can be obtained from TIDINESS 16.1 The Owner must keep the Lot in a neat and tidy condition, maintained free from rubbish before, during and after any Building Work The Owner must not deposit on adjoining land any excavation material, trees, rubbish, building waste or other substances The Owner authorises the Developer to dispose of any waste material abandoned by the Owner or the Owner s builder at the Owner s expense and may recover such cost from the Owner as a debt due and owing. Street trees or signs damaged by the Owner s builder must be replaced at the end of construction. The Developer reserves the right to replace damaged trees and may recover such cost from the Owner as a debt due and owing. 10 FOREST SPRINGS ESTATE The Cascades

11 17. DEVELOPMENT APPLICATIONS 17.1 The Owner may not object or become a submitter to any development application made by the Developer or its consultants for the future development of the estate. 18. ALTERATION TO DESIGN GUIDE 18.1 The Owner cannot object or claim compensation if the Developer varies this Design Guide. 19. SALE BY OWNER 19.1 If the Owner transfers the Lot they must obtain from the transferee a deed of covenant in favour of the Seller (in such form as the Seller requires) so that the transferee agrees to be bound by this Design Guide as if it was the Owner. If the Owner does not do that, it indemnifies the Seller against all loss and damage incurred by the Seller as a result. 20. MERGER 20.1 This Design Guide does not merge on settlement of this contract. 21. PERFORMANCE BOND 21.1 The purchase price of the Lot at settlement includes a security (Performance Bond) for the Buyer s performance under the Design Guide. The Developer must return the Performance Bond to the Buyer after the Buyer has fully complied with its obligations (including driveway, fencing and landscaping and rectification of any damage to the road verge caused during the construction of the home) to the Developer s satisfaction. 22. DEFINITIONS 22.1 In this Design Guide, unless inconsistent with the context or subject matter: a. Building Works means any construction, alteration, additions, extensions or repairs for or to Improvements on a Lot. b. Developer means the person or company who undertakes the Development. c. Development means the Forest Springs Development located on the Land. d. Forest Springs Design Guide Review Panel means the developer and Gladstone Drafting. e. Home means any dwelling and, where the context permits or required, other Improvements on the relevant Lot which are ancillary to the dwelling. f. Improvements includes a dwelling, garage, shed, tank, fence, retaining walls, exterior lighting, driveways, swimming pool, spa, recreation structure or any other improvement made to any land. g. Local Authorities means Local Councils, Ergon Energy and the likes. h. Lot means the Lot the subject of this Contract. i. Owner means: A person registered, or entitled to be registered, as owner of a Lot; or A mortgagee of a Lot who has taken steps to enforce the mortgage. j. Street Front Boundary means any boundary line, or part of it, of a Lot, which adjoins the alignment of a street. k. Outermost projection means the outermost projection of any part of a building or structure including, in the case of a roof, the outside face of the fascia, or the roof structure where there is no fascia, or attached sunhoods or the like, but does not include retractable blinds, fixed screens, rainwater fittings, or ornamental attachments. l. Setback means for a building or structure other than a swimming pool, the shortest distance measured horizontally from the outermost projection of the building or structure to the vertical projection of the boundary of the lot. Residential Building and Design Guide 11

12 NOTES 12 FOREST SPRINGS ESTATE The Cascades

13 APPENDICES APPENDIX A HOME DESIGN STANDARDS APPLICATION FORM APPENDIX B APPLICATION REQUIREMENTS CHECKLIST APPENDIX C PERFORMANCE BOND REFUND APPLICATION FORM Residential Building and Design Guide 13

14 PERFORMANCE BOND REFUND APPLICATION FORM THE CASCADES Lot Number: Street Name: OWNER DETAILS Name: Mailing address: State: Postcode: Phone: BUILDER DETAILS Name: Mailing address: State: Postcode: Phone: OWNER CONFIRMATION Owner advises that they have completed construction of the house (including driveway, fencing and landscaping and rectification of any damage to the road verge caused during the construction of the home) on the above Lot. Owner hereby requests refund of the Performance Bond in accordance with the terms and conditions of the contract of sale. Owner s signature: Date: DESIGN REVIEW INSPECTION Inspection Date: This page intentionally left blank The application for refund of the Performance Bond has been Approved Not Approved Checklist of relevant sections from the Residential Building & Design Guidelines: APPROVAL OF DEVELOPER BUILDING MATERIALS FENCES SIGNS RELOCATED BUILDINGS TIDINESS / DAMAGE DWELLING SHEDS & OUTBUILDINGS RETAINING WALLS TEMPORARY STRUCTURES DRIVEWAYS & GARDENS INSPECTION COMMENTS / REASON FOR REFUSAL Design Review Manager: Date: EFT PAYMENT CHEQUE (cheque will be sent to above mailing address) BSB Number: Account Number: Name of account holder FOREST SPRINGS ESTATE The Cascades

15 HOME DESIGN STANDARD APPLICATION FORM THE CASCADES LOT NUMBER Street OWNER DETAILS Name Phone Mobile Postal Address State Postcode BUILDER DETAILS Builder Name Phone Mobile Postal Address State Postcode DESIGN GUIDELINES REQUIREMENTS TO BE SUBMITTED A. Site Plan (min scale 1:200) showing all setbacks; location of improvements; contours; AHD finished floor levels of house and garage; fencing location, material and and height; retaining wall locations material and height; all easements and service locations; meter box and hot water service locations; driveway locations and materials; location of all taps in front yard. B. Dimensioned floor plans (min scale 1:100) showing all room dimensions, verandah and porch dimensions, door and window positions Y/N C. All elevations (min scale 1:100), indicating building heights, roof pitches, eaves size and external fixtures (air conditioner, solar panels, TV antenna/dish, water tanks etc.) D. Schedule of external materials, finishes and colours including roof, walls, garage door and letterbox. E. Cross sections (1:100) indicating details of walls constructed on boundaries and ceiling height. OWNER/BUILDER ACKNOWLEDGEMENTS A. Fibre-to-the-home Telephone and internet services to each home at Forest Springs will be provided by a high speed fibre optic network in accordance with the Australian government s Fibre in New developments Policy. It is the responsibility of the Owner and the Builder to adhere to the specifications for the in-home wiring and related broadband infrastructure in order to be able to connect phone and internet services once the home is complete. In-home wiring to be completed by: BUILDER OWNER B. Commencement and completion The Forest Springs covenants require that construction of the dwelling must commence within 1 year from settlement of the purchase of the land and must be completed (including garage, driveway and front landscaping) within 2 years from settlement of the purchase of the land. Acknowledged by: BUILDER OWNER Owner/Builder Comments

16 HOME DESIGN ASSESSMENT YOUR APPLICATION IS Approved Not Approved Conditions of approval / Reason for refusal Owner Signature Date Submitted Builder Signature Date Received Design Review Manager Date Assessed

17 APPLICATION REQUIREMENTS CHECKLIST THE CASCADES SITE PLAN (1:200 scale) Street address including lot number Property boundaries and easements Finished floor and platform levels Building envelope (if applicable) Private open space North point Boundary setbacks (outer-most projection and wall dimensions) Building outline and extent of eaves or overhangs Site coverage (m 2 ) Driveways location, materials and finishes Height and construction of all fences Location of rainwater tank Location of refuse bins Proposed cut and fill plus retaining wall/batter detail Any structures including (but not limited to) outbuildings, sheds, pergolas, gazebos, pools etc. Surrounding / neighboring properties setbacks (if applicable) Construction waste containment location LANDSCAPE PLAN (1:200 scale) Fencing details Turfed and mulched areas Garden areas including plant pot sizes Letterbox details Details of works to be completed by Owner after completion of construction. FLOOR PLANS (1:100 SCALE) Room names and areas Internal & external dimensions Location of meter box Location of hot water, gas services and meters ELEVATIONS (1:100 SCALE) All sides of the building Indication of existing and excavated site levels Indication of proposed floor Proposed retaining walls or batters Location and extent of proposed materials Position of solar panels, external air conditioning units, clothesline and aerials Roof pitch, and overall building height Schedule detailing external colour selection Materials and colours schedule APPLICATION FEE An invoice of $275 inc gst will be ed to you once an application has been received by the Design Review Panel NOTE: Failure to send a copy of the above documents, or provide adequate details, may delay the approval process Residential Building and Design Guide 17

18 18 FOREST SPRINGS ESTATE The Cascades This page intentionally left blank

19 PERFORMANCE BOND REFUND APPLICATION FORM THE CASCADES Lot Number: Street Name: OWNER DETAILS Name: Mailing address: State: Postcode: Phone: BUILDER DETAILS Name: Mailing address: State: Postcode: Phone: OWNER CONFIRMATION Owner advises that they have completed construction of the house (including driveway, fencing and landscaping and rectification of any damage to the road verge caused during the construction of the home) on the above Lot. Owner hereby requests refund of the Performance Bond in accordance with the terms and conditions of the contract of sale. Owner s signature: Date: DESIGN REVIEW INSPECTION Inspection Date: The application for refund of the Performance Bond has been Approved Not Approved Checklist of relevant sections from the Residential Building & Design Guidelines: APPROVAL OF DEVELOPER BUILDING MATERIALS FENCES SIGNS RELOCATED BUILDINGS TIDINESS / DAMAGE DWELLING SHEDS & OUTBUILDINGS RETAINING WALLS TEMPORARY STRUCTURES DRIVEWAYS & GARDENS INSPECTION COMMENTS / REASON FOR REFUSAL Design Review Manager: Date: EFT PAYMENT CHEQUE (cheque will be sent to above mailing address) BSB Number: Account Number: Name of account holder Residential Building and Design Guide 19

20 20 FOREST SPRINGS ESTATE The Cascades This page intentionally left blank

21 Residential Building and Design Guide 21

22 CBD BRESLIN ST TOOLOOA ST DERBY ST PHILIP ST KIRKWOOD DRIVE HARVEY ROAD DIXON DR GLENLYON RD DIXON DR KIRKWOOD DR LAND SALES OFFICE FOREST SPRINGS DR GLENLYON RD enquiries FOREST SPRING LAND SALES CENTRE 8 FOREST SPRINGS DRIVE KIRKWOOD