SUPPLY INSTALL SAFE ACCESS SYSTEMS.

Size: px

Start display at page:

Download "SUPPLY INSTALL SAFE ACCESS SYSTEMS."

Malcolm Harris
5 years ago
Views:

1 SAFE ACCESS SYSTEMS

2 Welcome to SAFE ACCESS Totalsite Safe Access is all about keeping you safe when working off the ground. Permanently. You ll likely have some or all of the following situations You need to access the air con units on the roof The Sky dish needs repairing Gutters need cleaning Rather than trying to figure out the best option to access these areas, give us a call. We will run you through the range of options available to you and advise what is best practice currently in NZ. We look forward to your call. Best regards, The Safe Access team at Totalsite Freephone

3 Totalsite Supplies is proud to to provide the leading solution for all roof access requirements Walkways Condenser Mounts Handrailing Plant Platforms /5 Screen Walls /7 Permanent Anchors Permanent Line Systems Fixed Ladders

Boardwalk Walkways The Problem Regular foot traffic on roofs causes extensive damage to the roof sheeting. On low pitch roofs, dented roofing iron causes puddling, leading to rusting and leakage.

4 Boardwalk Walkways The Problem Regular foot traffic on roofs causes extensive damage to the roof sheeting. On low pitch roofs, dented roofing iron causes puddling, leading to rusting and leakage. In addition, the roofing material is a perfect trip hazard for tradesmen. The Solution Install a Boardwalk Walkway system. This system is ideal because: Safety provides 40% better grip than alternative options No leaks N o d e b r i s t r a p b e i n g r a i s e d b y m m f r o m t h e roof profile, debris can pass freely underneath C o s t e ff e c t i v e c o m p a r e d t o e x p e n s i v e r e p a i r s associated with regular roof traffic Long lasting - all components are non-corrosive Service Supply and install service NZ wide C o m p l i a n t I n a c c o r d a n c e w i t h A S / N Z S I n d u s t r y specifications Local designed and manufactured in NZ Long term peace of mind - 25 Year warranty Options W i d t h s S t a n d a r d w i d t h s a r e m m, m m, 1200mm and 1500mm C a n b e i n s t a l l e d i n a n y d i r e c t i o n o n m o s t N Z r o o f profiles Levelled walkways available for 7 + roof pitches S i n g l e - s i d e d o r d o u b l e - s i d e d h a n d r a i l s a r e optional Specifications I-Beam Extrusion: Nylon roof clamps: Polyethylene Grate: Stainless steel fixings: Tek screws: (Materials used are non-corrosive) Installation Purlin spacing: 3600 mm max Bottom Support I-Beams: 2000 mm max T6 GV-3H HDPE Grade 304 Grade Stainless Steel Dimension Weight Walkway grate: 600mm x 750mm Height above roof profile: 200mm Weight: 4 kg/m installed All componentry has been specifically designed to comply with the following industry standards: A S : S t a n d a r d s f o r fi x e d p l a t f o r m s, w a l k w a y s, stairways and ladders. A S / N Z S : B 1 : S t r u c t u r a l d e s i g n r e q u i r e m e n t s w i t h reference to performance functionality. AS/NZS 1170: B2: Durability codes and standards NZ Metal Roof Code of Practice Warranty - 25 Year Warranty 1

Boardwalk Condenser Mounts The Problem The traditional method of installing Condensers and other roof mounted units on timber blocks or steel rails is almost guaranteed to nullify the roofing

The Solution: Use Totalsite Condenser Mounts which are ideal because of - L e a k p r e v e n t i o n u s i n g l e a k p r o o f m o u n t i n g brackets N o d e b r i s t r a p b e i n g r a i s e

firm We i g h t a l l o c a t i o n t h e w e i g h t o f t h e u n i t s a s distributed to the purlins Quietness minimising vibration noise Long lasting - all components are non-corrosive Compliant

in any direction Angle adjustment (levelled) Specifications I-Beam Extrusion: Nylon roof clamps: Stainless steel fixings: Tek screws: (Materials used are non-corrosive) Installation Purlin spacing:

5 Boardwalk Condenser Mounts The Problem The traditional method of installing Condensers and other roof mounted units on timber blocks or steel rails is almost guaranteed to nullify the roofing material warranty. Expensive problems down the track include rusting the roofing iron, leaks, or even the unit eventually coming loose from its mountings. The Solution: Use Totalsite Condenser Mounts which are ideal because of - L e a k p r e v e n t i o n u s i n g l e a k p r o o f m o u n t i n g brackets N o d e b r i s t r a p b e i n g r a i s e d o ff t h e r o o f p r o fi l e, debris can pass freely underneath C o s t e ff e c t i v e d u e t o q u i c k i n s t a l l a t i o n a n d modular design Looks after the unit holind it level and firm We i g h t a l l o c a t i o n t h e w e i g h t o f t h e u n i t s a s distributed to the purlins Quietness minimising vibration noise Long lasting - all components are non-corrosive Compliant In accordance with AS/NZS industry specifications Local designed and manufactured in NZ Long term peace of mind - 25 Year warranty Options Multiple Sizes Single/multiple unit width Can be installed in any direction Angle adjustment (levelled) Specifications I-Beam Extrusion: Nylon roof clamps: Stainless steel fixings: Tek screws: (Materials used are non-corrosive) Installation Purlin spacing: Bottom Support I-Beams: T6 GV-3H 304 Grade Stainless Steel 600 mm max 2000 mm max Load Bearing Capabilities Loading capacity of Boardwalk condenser mounts are determined by Purlin Spacing All componentry has been specifically designed to comply with the following industry standards: AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders. AS/NZS 1170: B1: Structural design requirements with reference to performance functionality. AS/NZS 1170: B2: Durability codes and standards NZ Metal Roof Code of Practice 2

Boardwalk Handrailing The Problem When you have services on the roof (such as air con units) which are within 2m of the edge, you are required to install some form of fall protection.

The Solution Boardwalk Handrailing is the ideal form of Fall Protection, because it prevents a fall, rather than saving you once you have fallen.

Lightweight minimal extra weight on the roof compared with steel systems Simple installation lowering the time required to be on the roof Modular can be fitted to almost any situation with very

6 Boardwalk Handrailing The Problem When you have services on the roof (such as air con units) which are within 2m of the edge, you are required to install some form of fall protection. Also when tradesmen must work near clearlite roofing material, or access a ladder to the roof, they re often within 2m of a significant fall distance. The Solution Boardwalk Handrailing is the ideal form of Fall Protection, because it prevents a fall, rather than saving you once you have fallen. This system is ideal because- Safety no catch points (such as tex screws) on the handrails. Lightweight minimal extra weight on the roof compared with steel systems Simple installation lowering the time required to be on the roof Modular can be fitted to almost any situation with very little customisation Cost effective Long lasting - all components are non-corrosive Service Supply and install service NZ wide Compliant In accordance with AS/NZS industry specifications Local designed and manufactured in NZ No need for annual recerts Long term peace of mind - 25 Year warranty Specifications I-Beam Extrusion T6 Aluminium Pipe 6061-T6 Nylon Componentry GV-6H Stainless steel fixings: 304 Grade Tek screws: Stainless Steel (Materials used are non-corrosive) Dimension Weight Height: Top Rail: Mid Rails: Weight: Installation Max purlin spacing: Bottom Support I-Beams: 1100mm 50mm diameter 8mm diameter 3kg/m installed (excl. walkway) 3600 mm 2000 mm apart All componentry have been specifically designed to comply with the following industry standards: AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders. A S / N Z S : B 1 : S t r u c t u r a l d e s i g n r e q u i r e m e n t s with reference to performance functionality. AS/NZS 1170: B2: Durability codes and standards Options Single/double sided handrails 2-3 handrails Toeboards Walkway mounted Free standing, mounting on: Iron roofing/membrane roofing/ Concrete tilt panel/poly panel 3

Con-Form Plant Platforms - Series 1 The Problem: Traditional steel plant platforms are prone to

The Solution: Con-form Series 1 plant platforms are surface mounted, quick design and install and

structure No leaks - surface mounted on the ribs Cost effective Long lasting - all materials are non

Industry specifications Long term piece of mind - 25 year warranty Options: Sizes - any size possible

Specifications Load Ratings Height Dimensions Materials 2.5kPa, 5.

7 Con-Form Plant Platforms - Series 1 The Problem: Traditional steel plant platforms are prone to leaks, and are time consuming to design, manufacture and install. The Solution: Con-form Series 1 plant platforms are surface mounted, quick design and install and other benefits include- Lightweight - 14kg/m 2 Less stress structure - distributes load across structure No leaks - surface mounted on the ribs Cost effective Long lasting - all materials are non corrosive Service - supply and install service NZ wide Compliant - in a accordance with AS/NZS Industry specifications Long term piece of mind - 25 year warranty Options: Sizes - any size possible from 1200 x 1200mm to 100mL (in 600mm increments) Heights - Min 138mmH up to max 500mmH Specifications Load Ratings Height Dimensions Materials 2.5kPa, 5.0kPa and greater Min 138mmH up to Max 500mmH 200mm x 1200mm up to 100 x 12mL Aluminium X 3mm Sheet 304 Stainless Steel Fixings AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders. 4

Con-Form Plant Platforms - Series 3 The Problem: Often a plant platform is required to be 1m+ above the roof surface to allow air flow, which increased the size and cost of the platform, and

Other benefits include- Lightweight - 20kg/m 2 Less stress on structure - distributes load across structure Suits any roof - including high pitch and saw tooth roofs No leak - surface mounted on

mind - 25 Year Warranty Options: Sizes - any size possible from 1200 x 1200mm to 100mL (in 600mm increments) Heights - Min 1000mmH up to max 2510mmH Specifications Load Ratings Height Dimensions

8 Con-Form Plant Platforms - Series 3 The Problem: Often a plant platform is required to be 1m+ above the roof surface to allow air flow, which increased the size and cost of the platform, and increases the stress on the sub structure. The Solution: Con-form Series 2 plant platforms are surface mounted, allow for superior air flow and can be designed to fit any roof. Other benefits include- Lightweight - 20kg/m 2 Less stress on structure - distributes load across structure Suits any roof - including high pitch and saw tooth roofs No leak - surface mounted on the ribs Cost effective Long lasting - all materials are non-corrosive Service - supply and install service NZ wide Compliant - in accordance with AS/NZS Industry specifications Long term peace of mind - 25 Year Warranty Options: Sizes - any size possible from 1200 x 1200mm to 100mL (in 600mm increments) Heights - Min 1000mmH up to max 2510mmH Specifications Load Ratings Height Dimensions Materials 2.5kPa, 5.0kPa and greater Min 1000mmH up to Max 2510mmH 1200mm x 1200mm up to 100mL 3mm Sheet Aluminium 304 Stainless Steel Fixings AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders. 5

Con-Form ScreenWall The Problem: Unsightly condenser units and other machinery on the roof often detract from an otherwise well designed building.

5 kg/m 2 Suits any roof or plant platform Cost effective Long lasting - all materials are non-corrosive Service - supply and install service NZ wide

Colours - any coloursteel/powder coat colour Can be mounted on an existing platform, or be free standing on a roof Specifications Heights 1200, 1600, 2000

9 Con-Form ScreenWall The Problem: Unsightly condenser units and other machinery on the roof often detract from an otherwise well designed building. The Solution: The ScreenWall integrates aesthetically with the surrounding architecture, and has the following benefits - Lightweight kg/m 2 Suits any roof or plant platform Cost effective Long lasting - all materials are non-corrosive Service - supply and install service NZ wide Compliant - in accordance with AS/NZS Industry specifications Long term peace of mind - 25 Year Warranty Options: Heights , 1600, 2000 and 2400mmH Colours - any coloursteel/powder coat colour Can be mounted on an existing platform, or be free standing on a roof Specifications Heights 1200, 1600, 2000 and 2400mmH Open Space 18.75% Wind Zones A, B and C, TC 2.5 Materials Aluminium 304 Stainless Steel Fixings AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders. 6

Con-Form PeaceMaker Screenwall The Problem: The noises from roof top machinery are a major issue, with residents in the

The Solution: The PeaceMaker screen wall provides exceptional noise control through absorption, as well as being very

25 kg/m 2 Suits any roof or plant platform Cost effective Long lasting - all materials are non-corrosive Service -

mind - 25 year warranty PeaceMaker aluminium slats are backed with a sound absorbing polyethylene foam, that

Sound absorption testing indicates a perfect Noise Reduction Coefficient (NRC) of 1.

10 Con-Form PeaceMaker Screenwall The Problem: The noises from roof top machinery are a major issue, with residents in the surrounding houses often complaining abour excessive noise. The Solution: The PeaceMaker screen wall provides exceptional noise control through absorption, as well as being very pleasing to the eye. Other benefits include - Lightweight kg/m 2 Suits any roof or plant platform Cost effective Long lasting - all materials are non-corrosive Service - supply and install service NZ wide Compliant - in accordance with AS/NZS Industry specifications Long term peace of mind - 25 year warranty PeaceMaker aluminium slats are backed with a sound absorbing polyethylene foam, that effectively traps noise within its cell structure. Sound absorption testing indicates a perfect Noise Reduction Coefficient (NRC) of 1. Options: Heights , 1600, 2000 and 2400mmH Colours - any coloursteel/powder coat colour Specifications Heights 1200, 1600, 2000 and 2400mmH Open Space 18.75% Wind Zones A, B and C, TC 2.5 Materials Aluminium 304 Stainless Steel Fixings A S : S t a n d a r d s f o r fi x e d p l a t f o r m s, w a l k w a y s, stairways and ladders. 7

11 Froglink Anchors The Problem In many situations, handrailing doesn t suit, and you need a simple anchor point near the work area. Permanent anchors have always been expensive and difficult to install, requiring roofing iron to be removed, extra framing installed etc. The Solution: Install a Totalsite Froglink anchor, which is ideal for many roofs because: N o l e a k s fi x e s t o t h e r i d g e o f t h e r o o fi n g profile Full range Provides anchorage for 360* Fall arrest rated to 15 kn Suits all metal roof types Q u i c k i n s t a l l a t i o n 6 0 % f a s t e r t h a n o t h e r similar anchors Long lasting - all components are non-corrosive C o m p l i a n t I n a c c o r d a n c e w i t h A S / N Z S industry specifications Service Supply and install service NZ wide Long term peace of mind - 25 Year warranty Specifications: 316 Stainless steel construction Multi directional fall protection Single person anchor rated at 15kN Designed to suit all roof profiles witha single row of holes for the rivets Install using 7x Gespia Bulbtite Rivets Spacing must be no greater than the rafter length All componentry has been specifically designed to comply with the following industry standards: A S / N Z S I n d u s t r i a l f a l l - a r r e s t s y s t e m s a n d d e v i c e s Part 4 EN 795:2012, CEN/TS 16415:2013 AS/NZS Manufacturing requirements for single point anchor device used for harness-based work at height MULTI 360 DIRECTIONAL 8

FrogLine Permanent Line System The Problem In many situations, handrailing doesn t suit, and you need a simple anchor point near the work area.

Compliant In accordance with AS/NZS industry specifications Service Supply and install service NZ wide Long term peace of mind - 25 Year

suit all roof profiles witha single row of holes for the rivets Install using 7x Gespia Bulbtite Rivets Suits pitches no greater than 25

12 FrogLine Permanent Line System The Problem In many situations, handrailing doesn t suit, and you need a simple anchor point near the work area. Permanent anchors have always been expensive and difficult to install, requiring roofing iron to be removed, extra framing installed etc. The Solution: Install a Totalsite Froglink anchor, which is ideal for many roofs because: No leaks fixes to the ridge of the roofing profile Full range Provides anchorage for 360* Fall arrest rated to 15 kn Suits all metal roof types Long lasting - all components are non-corrosive Compliant In accordance with AS/NZS industry specifications Service Supply and install service NZ wide Long term peace of mind - 25 Year warranty Specifications: 316 Stainless steel construction Multi directional fall protection Single person anchor rated at 15kN Designed to suit all roof profiles witha single row of holes for the rivets Install using 7x Gespia Bulbtite Rivets Suits pitches no greater than 25 degress on a multitude of roof profiles. The FrogLine has been rigorously tested and manufactured in accordance with AS/NZS EN795:2012, CEN/TS 16415:2013 9

Ultrasafe Fixed Ladders The Problem Accessing a roof from off a ladder makes for multiple issues.

The Solution: Installing an Ultrasafe fixed ladder provides tradesmen with the ideal method to access the roof safely.

The Totalsite Ultrasafe Fixed Ladder is ideal because: Safety high grip rungs Bolt together design - swarf left on site Long lasting - all components are non-corrosive Lightweight

in NZ Long term peace of mind - 25 year warranty Options S t a n d a r d w i d t h i s 6 0 0 m m, o t h e r o p t i o n s available.

13 Ultrasafe Fixed Ladders The Problem Accessing a roof from off a ladder makes for multiple issues. Stabilising the ladder while climbing it is difficult, and getting off the ladder safely at top is almost impossible. The Solution: Installing an Ultrasafe fixed ladder provides tradesmen with the ideal method to access the roof safely. Available in standard sizes, they can also be customised to fit any situation. The Totalsite Ultrasafe Fixed Ladder is ideal because: Safety high grip rungs Bolt together design - swarf left on site Long lasting - all components are non-corrosive Lightweight Customised Low maintenance Service Supply and install service wide C o m p l i a n t I n a c c o r d a n c e w i t h A S / N Z S industry specifications Local designed and manufactured in NZ Long term peace of mind - 25 year warranty Options S t a n d a r d w i d t h i s m m, o t h e r o p t i o n s available. Standard and Adjustable fixing brackets Roof to ground, or roof to 2m from ground Caged or non-caged Safety gate hatch Specifications Extrusions Fixings 6061-T6 Aluminium 304 Stainless Steel All componentry has been specifically designed to comply with the following industry standards: A S : S t a n d a r d s f o r fi x e d p l a t f o r m s, w a l k w a y s, stairways and ladders. AS/NZS 1170: B1: Structural design requirements with reference to performance functionality. AS/NZS 1170: B2: Durability codes and standards NZ Metal Roof Code of Practice 10

14 Other Safe Access

15 Options Available

16 AUCKLAND COMING SOON CHRISTCHURCH 72 Treffers Road Wigram Freephone TIMARU 35 Leckie Street Freephone Safe Access Team: Johnny Marcus Hyrum Jason