IONTRA DENEB , CATALOG

Transcription

1 DENEB joint-stock company shop and office: 1756 Sofia 115, Sv. Kliment Ohridski blvd. tel.: fax: sales@denelbg.com deneb@denelbg.com PRO INTRA CATALOG

2 DENEB is a Bulgarian joint-stock company established in 1990 and owner of the DENEL factories. Company DENEB is a leader in the manufacture of high quality dry construction mixes, interior and exterior paints and plasters, heat and hydro-insulation systems and dry fractionated silica sand. Both plants are built up as per German conceptual design and use ALLGAIER equipment. The computerized management system uses Canadian software and completely excludes any human mistakes. We have our own laboratory and perform constant incoming and outgoing quality control. We manufacture 40 of the 70 products developed. We are certified under EN ISO 9001:2008 by TUV Thuringen. The products manufactured are sub-divided in the following groups: plasters for interior decorative solutions paints for interior and exterior use plasters for interior and exterior use Primers Rough coat plasters Adhesives Floor putty Interior decorative plasters Heat and hydro-insulation systems In 2009 a unique by its nature installation for drying and fractioning of silica sand by fractions from 0 to 5 mm was developed and commissioned within the framework of DENEL Dry Construction Mixes Plant. Its production capacity is 20 tons per hour and tons annual production output. With the greatest pleasure we present to you also the newest interior products DENEL, created at the end of VENEZIANO known as "Venetian plaster". ProARTIS known as "Venetian plaster". It helps in achieving a "marble effect" in different colours. ProANTICO known as "Ancient" plaster, creating the impression of antique effect. ProMETALLICO structural interior paint with specific metallic brilliance. It is unique for decoration, which can be used also as additional effect to the other decorative plasters. It is appropriate for decorations both of home and of public buildings. ProMETALLICO interior plaster with metal brilliance. It is appropriate for decorations both of private homes and public buildings. ProTRAVERTINO decorative plaster with vision of the stone veneer. For interior and exterior application. Technical Specification APPLICATION To be applied with stainless steel spatula of uniform or a relief layer with thickness 1-3 mm. RECOMMENDATION The content of the package must be stirred before using. Optimal temperature range of application: 18 C 30 C. Do not apply thick layers (not suitable to fill uneven surfaces). In case of skin contact, the place must be washed as soon as possible (notwithstanding the substances used in ProCOLORISSIMO the interior paint comply with all sanitary and medical safety regulations), as the paint polymerizes (dies up) and becomes difficult to be removed. The addition of other material. APPLICATION RATE Approximately 0,8 1kg/m² depending on the thickness of the layer. STORAGE In dry places, at 5 C - 30 C. Avoid direct sunlight. EXPIRY TERM See the cover of the bucket PACKAGE 5 kg, 15 kg packs Our company is constantly advancing, both in the expansion of our product range, maintenance of the highest quality and in the complex customer service, which shall continue in the years to come. Complete information about our products may be found at our website TECHNICAL CHARACTERISTICS Specific gravity: 1200 кg/ m 3 ± 3% Aspect: Homogeneous pasty mixture ph: 6,6 7,6 Dilution: ready for use Application tools: stainless steel spatula or plastering trowel Complete drying up: approximately 4 days (at temperature 20 C and relative humidity of 80%) Emission of volatile organic compounds in conformity with 2004/42/ЕC directives Category: А/L Corresponds to the requirements of maximum admissible values of VOC (volatile organic compounds); Limit stage 2 (since 1 January 2010) 100 g/l (мах); Color range: specially developed tone card Cleaning of the tool: using water

3 VENEZIANO VENEZIANO is plaster on acrylic substrate for interior decoration. used to achieve marble effect in the various colour solutions. VENEZIANO emphasizes the individuality of each room, by creating a sense of style and comfort. The product satisfies both the classical and the most advanced creative ideas in terms of your interior. The product is non-flammable and non-toxic to humans and to the environment. PRODUCT CHARACTERISTICS: excellent steam permeability prevents the formation of mould and mildew non-toxic to humans and to the environment non-flammable PREPARATION OF THE PLACE OF APPLICATION The substrate should be well cleaned up and should have no grease on it. Recommed before application of the plaster to lay primer. In this way good cohesion between the plaster and the substrate is achieved. APPLICATION The product is applied usually in three coats with plastering trowel for Venetian Plaster. 1. First coat - applied evenly and left to dry up for about hours. 2. Second coat - fine layer is applied at masks until completely smooth surface is achieved. The finished layer is left to dry up for approximately 6 8 hours. 3. Third coat - super fine masks are applied, whereat the surface is polished with the edge of plastering trowel or stainless steel spatula. PROTECTION The plaster is dried up completely in 4 days, after which ProGlacis (sealing surface layer) that makes it resistant to wash out. EXPENDITURE NORM g/m² per layer STORAGE In dry premises, at a temperature from 5 C to 30 C. Keep away from direct sunlight. PACKAGE: 5 kg and 25 kg packs EXPIRY TERM: 1 year TECHNICAL CHARACTERISTICS Dilution: ready for use. Application tools: stainless steel spatula or plastering trowel. Application temperature: from 10 C to 36 C (at relative humidity of the air not еxceeding 80%). Complete drying up 4 days (at temperature 20 C and relative humidity of 80%). Cleaning of the tools: with water Specific weight: 1.5 kg/cu.m + 3%. Viscosity: CPS Brookfield (at temperature 25 C and RVT 20 vol./min). Color range: specially developed tone card

4 ProARTIS is a decorative plaster on acrylic substrate, used to achieve nice "marble" effect more famous as Venetian Plaster. It is characterised with colour blending into one or close tonalities and has mild gleams of light on the surface. ProARTIS is supplied on the market in rich colour palette. By means of the various colour solutions we can dip in the spirit of the tradition and jointly with this the decorated walls may have exclusively contemporary vision. The specific composition of the plaster allows to achieve easily both classical gloss surface and matt or lustreless surface. The skilful alternating and combination of surfaces with various degree of reflection of light contributes to the unique sense of grace and comfort. ProARTIS has excellent adhesion to the substrate and is applied with minimal efforts. This quality makes it extremely valuable not only to master painters, but also to everyone who is willing to deploy his imagination.

5 ProARTIS emphasizes the individuality of each premise, by creating a sense of style and comfort by satisfying both the classical and the most vanguard creative ideas in terms of the interior. The product is non-flammable and non-toxic to humans and to the environment. Technical Specification Decorative plaster on acrylic substrate, used to achieve "marble" effect in the various colour solutions. The plaster possesses excellent steam permeability and prevents the formation of mould and mildew. The product is non-flammable and non-toxic to humans and to the environment. Implementation For interior decoration. Preparation of the Substrate The substrate should be well cleaned up and should have no grease on it. Two coats are applied. Grout Denel ProFundis, whereas the second coat is applied after drying up of the first coat. In this way good cohesion between the plaster and the substrate is achieved. Application The product is applied usually in three coats with special plastering trowel or stainless steel spatula inox for Venetian Plaster. 1. First coat - applied evenly and left to dry up for about hours. 2. Second coat - fine layer is applied at masks until completely smooth surface is achieved. The finished layer is left to dry up for approximately 6 8 hours. 3. Third coat - super fine masks are applied, whereat the surface is polished with the edge of plastering trowel or stainless steel spatula. Protection The plaster is dried up completely in 4 days, after which DENEL ProGlacis (sealing surface layer) may be applied. Application rate g/sq.m for one layer Expiry term 1 year Technical Characteristics Dilution: ready for use Application tools: stainless steel spatula or plastering trowel Application temperature: from 10 C to 36 C (at relative humidity of the air not exceeding 80%) Complete drying up: 4 days (at temperature 20 C and relative humidity of 80%) Cleaning of the tools: with water Specific weight: 1.5 kg/cu.m ± 3% Viscosity: CPS Brookfield (at temperature 25 C and RVT 20 vol./min) Storage: In dry premises, at a temperature from 5 C to 30 C. Avoid direct exposure to sunlight at storage

6 ProMETALLICO PLASTER is decorative plaster for interior application with impressing effect. The product allows the realisation of elegant solutions for the interior. It ensures incredible prestige to the interior decoration. It is appropriate for decorations both of private homes and public buildings. ProMETALLICO PLASTER contains acrylate resin, aluminium-silicate sealants and specific rheological additives. The product has strong wear resistance, steam permeability, odourless, non-toxic, nonflammable and harmless to humans and to the environment.

7 Preparation of the Substrate Before application the surface has to be cleaned up from dust and unattached particles. Two coats of grout DENEL ProFundis are applied as primer (coloured in appropriate tonality), whereat the second coat is applied after the first coat dries up. Application To be applied with plastering trowel. Application rate g/ sq.m EXPIRY TERM 1 year Technical Characteristics Dilution: ready for use. Application tool: plastering trowel Application temperature: from 10 C to 30 C (at relative humidity of the air not exceeding 80%) Drying up time at touch: approximately 3 hours (at temperature 20 C and relative humidity of the air of approximately 80%) Complete drying up: 1 day (at temperature 20 C and relative humidity of 80%) Specific weight: kg/ cu.m ± 3 % Viscosity: CPS Brookfield (at temperature 25 C and RVT 20 vol./min) Cleaning up of the tools: with water Colour range: golden, silver, bronze, pearl and copper Storage: In dry premises, at a temperature from 5 C to 30 C. Avoid exposure to direct sunlight at storage.

8 ProVELLUTO ProVELLUTO is decorative plaster with the shining metallic surface with beautiful velvet effect. It is characterized by color transfusions to one or another close tonalities, accompanied by soft glares from surface-reflected light. ProVELLUTO Interior-decoration intended. By different color solutions, we can go deep to traditional spirit and, simultaneously, decorated walls shall have an extremely modern vision. Skilful intermittence and combination of different light-reflecting capacities shall contribute to an incomparable sense of elegance and comfort.

9 PROPERTIES easy to apply adhesion to the place of application is perfect resistant to abrasion steam-permeable water resistance An optimal balance between parapermeability and waterproofness Possible structuring of entire walls and single elements. non-toxic to humans and to the environment non-flammable PREPARATION OF THE SUBSTRATE The wall must be well puttied. Before application, the surface must be well cleaned from dust and not bonded particles. ProFUNDIS primer is to be applied twice before hand, and colored latex (in conformity with the color of the plaster). APPLICATION It must be applied using an inox trowel with smooth movements. The effect of different light refraction is achieved by the direction of movement of the trowel and the inequality of the strokes. This way, on the decorated surface shining and matt segments with velvet effect are alternating. RECOMMENDATION The contents of the package must be well stirred before use.environmental temperatures lower than 5oC and higher than 30oC are not suitable. After application, the tools must be immediately washed. In case of skin contact, the place must be immediately washed with water (although the substances contained in ProVELLUTO comply with all the sanitary safety and innocuousness standards, it will dry up and its removal will be difficult). The addition of other materials is inadmissible. APPLICATION RATE g/m 2 approx. (depending on the number of layers applied) STORAGE at dry places, at temperature between 5 o C and 30 o C. Keep away from direct sunlight. PACKAGE 1 kg, 5 kg packs EXPIRY TERM 1 year TECHNICAL CHARACTERISTICS Dilution: ready for use. Application tools: inox trowel Application temperature: from 10 o C to 30 o C (relative air humidity not higher than 80%). Full drying: 1 day (at t = 20 o C and relative humidity 80% approx.). Specific gravity: 1100 kg/m 3 ± 3% Viscosity: CPS Brookfield (at t = 25 o C and RVT = 20 rev/min.) Tools: cleaning with water Color range: specially developed tone card

10 ProTRAVERTINО is a product developed with the objective of re-creating the external vision of the gem stone Travertine. It is applied extremely easily and provides opportunity for structuring whole walls or separate components. It possesses excellent adhesion to the substrate and good resistance to wearing, optimal balance between steam permeability and watertight. ProTRAVERTINО comprises specific plaster with interior and exterior implementation. It contains acrylic resin, inorganic sealants and specific rheological additives. The product is resistant to wearing, it is permeable to steam, odourless, non-toxic, non-flammable and safe to the humans and the environment.

11 Implementation Appropriate for decoration of interior and exterior walls. Preparation of the Substrate Before application the surface shall be cleaned up from dust and unattached particles. Two coats of grout DENEL ProFundis are applied as primer, whereat the second coat shall be applied after drying up of the first layer. Application To be applied with plastering trowel in one layer. Decoration After applying a layer with the desired thickness, the surface is processed by means of relief paint pad. After drying up of the applied layer, transparent tinted latex ProGLAZЕS is spread further on it, which is processed by means of plastic/rubber raquel or sponge. Recommendation The container shall be shaken before use. Avoid working at temperatures lower than 5 C. After use the instruments are rinsed immediately with water. In case of contact with the skin immediately rinse thoroughly with water (despite that substances the used in ProTRAVERTINO comply with all sanitary and medical norms of safety, it dries up and its removal subsequently is impeded). No adding of any other materials is allowed. Application rate kg/ sq.m - depending on the thickness of the layer Expiry term 1 year Technical Characteristics Dilution: ready for use Application tools: plastering trowel Application temperature: from 10 C to 30 C (at relative humidity of the air not exceeding 80%) Drying up time at touch: approximately 3 hours (at temperature 20 C and relative humidity of the air of approximately 80%) Complete drying up: 1 day (at temperature 20 C and relative humidity of 80%) Viscosity: CPS Brookfield (at temperature 25 C and RVT 20 vol./min) Cleaning up of the tools: with water Colour range: white Storage: In dry premises, at a temperature from 5 C to 30 C. Avoid direct exposure to sunlight at storage

12 ProANTICO is a relief plaster, intended to be used in interior solutions. The original relief, which is achieved resembles the walls of antique building or the simple beauty of velvet fabrics. ProANTICO emphasizes the individuality of each room, by creating a sense of uniqueness and comfort. The product satisfies both the classical and the most advanced creative ideas in terms of your interior. The specific composition of the product makes it appropriate for decoration both of the home and public buildings (offices, hotels, business centres, restaurants, salons, etc.). It is applied extremely easily and provides opportunity for structuring whole walls or separate components. ProANTICO has excellent adhesion to the substrate and high resistance to wearing, optimal balance between steam permeability and watertight. It provides the opportunities to use large variety of decorative techniques.

13 ProANTICO contains acrylate resin, calciummagnesium aluminium-silicate sealants and specific rheological additives. It is applied with brush or paint roller, after which it undergoes secondary processing with a paint pad or plastic plastering trowel. The product is resistant to wearing and is permeable to steam. It is non-toxic. Technical Specification Preparation of the Substrate Before application the surface has to be cleaned up from dust and unattached particles. Two coats of grout DENEL ProFUNDIS are applied, then the second coat is applied after drying up of the primer paint coat. Application The application of ProANTICO shall be done evenly with a paint roller with long hair, brush or plastic plastering trowel. The thickness of the applied paint layer is determined by the selected secondary technique for decoration. Before drying up the material is processed with various instruments according to the desired effect of the finish. Additional Decoration After drying up of the applied primer layer, on the decorated surface can be applied further latex for interior. To achieve rustic effect on the surface is applied transparent tinted latex DENEL ProGLAZЕS. Technical Characteristics Dilution: ready for use Application tools: paint brush or paint roller with medium length hair Tools for surface processing: paint pad, plastic plastering trowel, etc. Application temperature: from 10 C to 30 C (at relative humidity of the air not exceeding 80%) Drying time at touch: 3 hours (at temperature 20 C and relative humidity of the air of app. 80%) Complete drying up: 7 days (at temperature 20 C and relative humidity of 80%) Specific weight: kg/cu.m ± 3 % Viscosity: CPS Brookfield (at temperature 25 C and RVT 20 vol./min) Cleaning up of the tools: with water Colour range: white Storage: In dry premises, at a temperature from 5 C to 30 C. Keep away from direct exposure to sunlight. Application rate approximately g/sq.m - in case of single coat application (depending on the relief) Expiry term 1 year

14 ProCOLORISSIMO ProCOLORISSIMO is decorative structured fine plaster on acrylic substrate, characterized by specific shining holographic effect. ProCOLORISSIMO is suitable for both interior and exterior decoration ProCOLORISSIMO emphasizes the individuality of each room, by creating a sense of uniqueness and comfort. The specific composition of the product makes it appropriate for decoration both of the home and public buildings (offices, hotels, business centres, restaurants, salons, etc.). It is applied extremely easily and provides opportunity for structuring whole walls or separate components.