FACULTY PROFILE. Work Experience Teaching Research Industry

Transcription

1 FACULTY PROFILE Name of the Faculty: Dr. HEMANTH R Designation: Associate Professor Contact Number: , Id: hemanth@nieit.ac.in Education Qualification FACULTY ROFILE FACULTY PROFILE Degree Specialization Year of passing University Ph.D Materials 2015 Karunya University, Coimbatore M.Tech Tool Engineering 2010 VTU, Belagavi B.E Mechanical Engineering 2007 VTU, Belagavi Diploma (FT) Tool and Die Making 1998 G T & T C, Bangalore Diploma (PT) Polymers and polymer 1998 Indian Plastic Institute, Mumbai processing FT Full Time: PT Part Time Work Experience Teaching Research Industry Publications National / Journals National Journals: 02 Journals: 14 National / Conferences National Conferences: 05 Conferences: 16 Area of Research / Specialization Materials Tribology Cutting tools Tool Design Manufacturing

2 Membership in Professional Bodies / University Bodies / Organizations 1. Institution of Engineers, India 2. Indian Plastic Institute, Mumbai Publications National/ Journals: Sl. No Journals Article title, Name of Journal, Year of publication, volume, Pages, Authors Mechanical and Tribological Behavior of Vinyl ester hybrid Composites, Tribology in Industry, under press. P.A. Udaya Kumar, Ramalingaiah, B. Suresha, R. Hemanth Effect of filler-filler interactions on mechanical properties of phenol formaldehyde based hybrid composites, Journal of Engineering and Technologies, 2017, 13, pp , P.B. Bharath, B. Suresha, R. Hemanth Friction and wear performance of cenospheres filled carbon epoxy composites under dry and water lubricated conditions: A comparative study, Journal of Manufacturing Technology Research, 2017, 09 (3-4), pp. B Suresha, S M Vinukumar, Hemanth R (SCOPUS Indexed ) Effect of short glass fiber and fillers on friction and wear performance of multiphased thermoplastic copolyester elastomer composites, Journal of Nanotechnology, 2017, 14(9/10/11), pp Hemanth R, Suresha B, Sekar M (IF 0.502) Optimization of testing parameters on two-body abrasive wear behaviour of nano-ommt filled carbon-epoxy composites based on the Taguchi method Journal of Nanotechnology, 2017, 14(9/10/11), pp Suresha B, R M Devarajaiah, Manpinder Singh, Hemanth R (IF 0.502) Abrasive wear behaviour of thermoplastic copolyester elastomer composites: A statistical approach, Journal of Precision Engineering and Manufacturing, 2016, 16(06), pp Hemanth R, Suresha B, Yang S-H and Sekar M (IF 1.205) Abrasive wear behavior of thermoplastic copolyester elastomer composites, Emerging Materials Research, 2015, 04 (EMR1), Rajashekaraiah Hemanth, Mohan Sekar, Bheemappa Suresha (IF 0.23) Physico-Mechanical behaviour of thermoplastic co-polyester elastomer / polytetrafluoroethylene composite with short fibers and microfillers, Journal of Composite Materials, 2015, 49(18), R Hemanth, B Suresha and M Sekar (IF 1.257)

3 National Dynamic mechanical analysis and three-body abrasive wear behaviour of thermoplastic copolyester elastomer composites, Advances in Tribology, 2014, Hemanth Rajashekaraiah, Sekar Mohan, Pramoda Kumari Pallathadka and Suresha Bhimappa Effect of short glass fiber and fillers on dry sliding wear behaviour of thermoplastic copolyester elastomer composites, Journal of Mechanical Engineering and Technology, 2014, 05(09), R. Hemanth, Prakash Sam Thomas, B. Suresha, M. Sekar (JIF ) Conceptual design of transfer mould tool for rubber bumper spring, Journal of Research in Engineering and Technology, 2014, 03(11), Akash N, Hemanth R (IF 3.127) Design of ejection system in transfer mould tool and justifying material selection of rubber bumper spring component, Journal of Emerging Trends in Science and Technology, 2015, 02(07), Akash N, Hemanth R. (SJIF 2.838) Conceptual design of injection mold tool for the chair hand rest component, Journal of Research in Engineering and Technology, 2014, 03(03), Sampath A, Hemanth R. (IF 3.127) Conceptual design of injection mould tool for inlet chamber of an air inflator, Journal of Research in Engineering and Technology, 2014, 03(03), Ashwaghosh R S, Hemanth R. (IF 3.127) Effect of fillers on Erosive wear behaviour of polyoxymethylene / polytetrafluoroethylene blend and their composites: A statistical approach, Indian Journal of Advances in Chemical Science, S1, 2016, pp Krishna, B. Suresha, S.S. Kallesh and R. Hemanth. (GIF 0.453) Effects of Fibers and Fillers on Mechanical properties of Thermoplastic Composites, Indian Journal of Advances in Chemical Science, 2014, 02, R Hemanth, M Sekar, B Suresha (GIF 0.453)

4 National / Conferences: Conferences Conferences Sl. No. Paper title, Name of the Conference, Year, Place, Authors 1. A comparative study of Single Point and Progressive cutting tool, during turning operations, Conference on Advanced Manufacturing, Materials, Management and Thermal science (AMMMT) 2010, SIT, Tumkur, Karnataka, November 2010, Hemanth R, Srinivas Bhat, Ramesha N Effect of micro-filler additions on the flexure and impact properties of short glass fiber reinforced Thermoplastic Copolyester Elastomer / Polytetrafluoroethylene blend composites, Conference on Advanced Manufacturing, Materials, Management and Thermal science (AMMMT) 2013, SIT, Tumkur, Karnataka, May Hemanth R, Sekar M, Suresha B and Pavitra Ajagol Characterization of Thermoplastic Co-polyester elastomer / polytetrafluoroethylene blend and their composites, Conference on Advanced Polymeric Materials (ICAPM) 2013, Mahatma Gandhi University, Kottayam, Kerala. October Hemanth R, Suresha B and Sekar M Role of short fibers and micron sized ceramic fillers on three-body abrasive wear behavior of thermoplastic copolyester elastomer / polytetrafluoroethylene blend composites, Conference on Advances in Tribology (ICAT) 2014,NIT, Calicut, Kerala, February Hemanth R, Suresha B, Sekar M and Pavitra Ajagol Effect of short glass fiber and fillers on dry sliding wear behaviour of thermoplastic copolyester elastomer composites, conference on current trends on Engineering and management (ICCTEM) 2014, Vidhyavardhaka college of Engineering, Mysore, Karnataka, July R Hemanth, Prakash Sam Thomas, B Suresha, M Sekar Abrasive wear behaviour of thermoplastic copolyester elastomer composites, conference on Advances in Materials and Materials Processing (AMMP) 2015, Karunya University, Coimbatore, TamilNadu, January Hemanth R, Suresha B, Sekar M Role of fillers on mechanical properties of selected thermoplastic composites, conference on Advancements in Polymeric Materials (APM) 2015, IISc, Bengaluru, Karnataka, February Hemanth R, Sekar M and Suresha B. Effect of short glass fiber and fillers on friction and wear performance of multi-phased thermoplastic copolyester elastomer composites, Indo-

5 Canadian symposium on Nano-Science and Technology (ICSNST) 2016, NIE, Mysore, Karnataka, February Hemanth R, Suresha B and Sekar M Optimization of testing parameters on two-body abrasive wear behaviour of nano-ommt filled carbon-epoxy composites based on the Taguchi method, Indo-Canadian symposium on Nano-Science and Technology (ICSNST) 2016, NIE, Mysore, Karnataka, February Suresha B, Devarajaiah R M, Manpinder Singh and Hemanth R Effect of fillers on Erosive wear behaviour of polyoxymethylene / polytetrafluoroethylene blend and their composites: A statistical approach, Conference on Advanced Materials and Technology (ICMAT) 2016, SJCE, Mysore, Karnataka, May Krishna, B. Suresha, S.S. Kallesh and R. Hemanth. Friction and wear behaviour of polymer nanofiber interleaved composite laminates, Symposium on Advanced Materials for Engineering Applications (ISAMEA) 2017, NIE Mysore, Karnataka, March B. Suresha, Kunigal Shivakumar and R. Hemanth. Tribological performance of Polyphenylene sulfide composite, Symposium on Advanced Materials for Engineering Applications (ISAMEA) 2017, NIE Mysore, Karnataka, March Avin Ganapathi, R. Hemanth, B. Suresha and Rupesh Roshan. Role of silicon carbide nanoparticles on dry sliding wear behaviour of epoxy composites, Symposium on Advanced Materials for Engineering Applications (ISAMEA) 2017, NIE Mysore, Karnataka, March Deepa Rani, Sriraksha, R. Hemanth and B. Suresha. Effect of short carbon fibers on the friction and wear behavior of polyphenylene sulfide composites, Indo-Brazil bilateral second Conference on Advanced Materials & Processing, Jointly by Kalasalingam University, India and Universidade de Brasília, Brazil th March 2017, Research Centre, KLU. Avin Ganapathi, Hemanth R, Suresha B, Rupesh Roshan. Study of the effects of polymer nanofiber on wear behavior of fiber reinforced epoxy nanocomposites in abrasion and fretting wear modes, 26 th Conference on the Processing and Fabrication of the Advanced Materials (PFAM-XXVI) 2017, Chonbuk National University, Jeonju, Republic of KOREA, 16 th -21 st October Suresha B, Shivakumar K, Hemanth R Solid particle erosion behavior of short glass fiber and particulate reinforced polyoxymethylene / polytetrafluroethylene composites, Conference on Automobile, Marine and Mechanical Engineering (ICAMME)

6 2018, Sri Venkateswara College of Engineering, Sriperumbudur, Kancheepuram, Tamilnadu, India, 4 th & 5 th, May 2018, Krishna, B. Suresha, Hemanth R, Kamaraj M. National Influence of fillers on mechanical, morphological and thermal properties of glass fiber reinforced thermoplastic copolyester elastomer hybrid composites, National conference on Advances in Polymeric Materials (NCAPM) 2014, SJCE, Mysore, Karnataka, April Hemanth R, Suresha B, Sekar M Role of fiber, micro and nano-fillers on physico-mechanical behaviour of thermoplastic copolyester elastomer composites, National conference on Nano Structured Materials (NCNSM) 2014, NSS Hindu College Changancherry, Kottayam, Kerala, August Hemanth R, Suresha B, Sekar M Design of gate location in transfer mould tool for rubber bumper spring, National conference on Advances in Mechanical Engineering (NCAME) 2014, AMC Engineering College, Bangalore, May Akash N and Hemanth R Conceptual design of transfer mould tool for rubber bumper spring, National conference on Advancements in Mechanical, Environment, Safety and Health Engineering (NCAMESHE) 2014, Knowledge Institute of Technology, Salem, Tamil Nadu, May Akash N and Hemanth R Processing and study of mechanical, thermal and tribological behaviour of particulate filled polymer composites, National conference on Research Advances in Science and Technology (NCRAST) 2017, CSI College of Engineering, Ooty, Tamil Nadu, 26 th and 27 th May Hemanth R, Suresha B and Sekar M. Faculty Development Programmes / Training Programmes Participated 1. New Model Curriculum for First Year BE/B.Tech-CBCS Detailed Syllabus ( ) as per Outcome- Based Education (OBE) format including Course Outcomes (CO) and Bloom s Taxonomy under TEQIP-1.3 for the course First Year under Mechanical Engineering Board held on 19 th May 2018 at Sahyadri College of Engineering and Management, Mangalore. 2. An Overview of Design of Machine Elements II Faculty Development Program, conducted by ATME college of Engineering, during 16 th to 20 th January Instructional Design and Delivery System under Quality Improvement Program, conducted by NIEIT, Mysuru, from 01 st to 06 th January E-Mobility and Innovations in Sheet Metal Forming under Continuing Education and Quality Improvement Programs, conducted by IIT Bombay during 03 rd to 07 th October Testing and Characterization of Polymeric Materials, under TEQIP-II, conducted by SJCE, Mysuru, during 15 th to 20 th September Author Workshop, jointly organized by VTU, Belagavi and Springer, held at Central College, City campus, Bangalore University, on 13 th February 2014.

7 Workshop Attended 1. Information Literacy for Academic Research and Publications conducted by NIEIT, Mysuru, during 30 th January Composites under TEQIP-II, conducted by NIE, Mysuru, during 16 th and 17 th August Awards/Recognition/Achievements/Others NIL