Series. FEATURES UL Listed for LP-Gas, natural gas and flammable liquid to 250 psig UL LISTINGS

Transcription

1 Series Carbon Steel LP-Gas Ball Valve NPT Threaded. 1/4 to psig WOG; 1-1/4 to psig WOG; 2-1/2 to psig WOG. Cold Non-Shock. 250 psig LP-Gas. 150 psig Saturated Steam. Vacuum Service to 29 in. Hg. Federal Specification: WW-V-35C. Type: II. Composition: CS. Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES UL Listed for LP-Gas, natural gas and flammable liquid to 250 psig Reinforced seats Mounting pad for easy actuator mounting Investment cast components U L LISTED Blow-out-proof stem design Adjustable packing gland Zinc phosphate corrosion protection UL LISTINGS Guide YSDT: LP-Gas shut-off valve. Guide YRPV: Gas shut-off valve for use with natural and manufactured gases. Guide YRBX: Flammable liquid shutoff valve. Guide MHKZ: No. 6 oil at 250ºF. STANDARD MATERIAL LIST 1. Lever and grip Steel, zinc plated w/vinyl 2. Stem packing RPTFE 3. Stem bearing RPTFE 4. Ball A108-12L14, chrome plated 5. Seat (2) RPTFE 6. Retainer A108-12L14 (1/4 to 1 ) A216-WCB (1-1/4 to 3 ) 7. Gland nut A108-12L14 8. Stem A108-12L14 9. Lever nut Steel, zinc plated 10. Body seal PTFE (1-1/4 to 3 ) 11. Body A216-WCB VARIATIONS AVAILABLE: Series with 316 SS Ball and Stem, UL Listed as noted above. Note: 250 psig Max. UL Listing. CARBON STEEL BALL VALVE NUMBER SIZE A B C D E F G Wt / / / / / / / For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4 to 1 ) Refer to Page M-11, Graph No. 11 (1-1/4 to 2 ) H-32

2 FLOW DATA For Apollo Ball Valves The listed Cv factors are derived from actual flow testing, in the Apollo Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard off the shelf valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing. Flow of Liquid Q = Cv ΔP SpGr or ΔP = (Q) 2 (SpGr) (Cv) 2 Where: Q = flow in US gpm ΔP = pressure drop (psig) SpGr =specific gravity at flowing temperature Cv = valve constant Flow of Gas Q = 1360 Cv (ΔP) (P1) (SpGr) (T) or ΔP = 5.4 x 10-7 (SpGr) (T) (Q) 2 (Cv) 2 (P2) Where: Q = flow in SCFH ΔP = pressure drop (psig) SpGr =specific gravity (based on air = 1.0) P2 = outlet pressure psia (psig ) T = (temp. F + 460) Cv = valve constant Cv FACTORS FOR APOLLO VALVES Valve Size (inches) 1/4 3/8 1/2 3/ /4 1-1/ / Ball Valves /200 Series /200 Series W Series B-140 Series /200 Series /400 Series Series Series AR Series /200 Series /900 Series A-100 Series /400 Series Series Series AR Series F-100 Series Series /400 Series Series K-100 Series AR Series C-100/200 Series D-140 Series D-640 Series G-UL Series W Series X Series /200 Series M-1

3 Cv FACTORS FOR APOLLO VALVES Valve Size (inches) 1/4 3/8 1/2 3/ /4 1-1/ / Ball Valves 79 Series /81 Series /200 Series A/83B Series R-100/200 Series A/86B Series R-100/200 Series A-100 Series A-200 Series A-700 Series A-900 Series B-100 Series A-100 Series A-200 Series A-700 Series A-900 Series B-100 Series Series A-100 Series Series Series Series A-100/200 Series /200 Series A-300/400 Series Series Series Series M-2

4 M-11

5 M-12