Mouse ICAM-1 / CD54 ELISA Pair Set

Transcription

1 Mouse ICAM-1 / CD54 ELISA Pair Set Catalog Number : SEK50440 To achieve the best assay results, this manual must be read carefully before using this product and the assay is run as summarized in the General ELISA protocol. 1

2 BACKGROUND Intercellular adhesion molecule-1 (ICAM-1, or CD54) is a 90 kda member of the immunoglobulin (Ig) superfamily and is critical for the firm arrest and transmigration of leukocytes out of blood vessels and into tissues. ICAM-1 is constitutively present on endothelial cells, but its expression is increased by proinflammatory cytokines. The endothelial expression of ICAM-1 is increased in atherosclerotic and transplant-associated atherosclerotic tissue and in animal models of atherosclerosis. Additionally, ICAM-1 has been implicated in the progression of autoimmune diseases. ICAM-1 is a ligand for LFA-1(integrin). When activated, leukocytes bind to endothelial cells via ICAM-1/LFA-1 interaction and then transmigrate into tissues. Presence with heavy glycosylation and other structural characteristics, ICAM-1 possesses binding sites for a number of immune-associated ligands and serves as the binding site for entry of the major group of human Rhinovirus (HRV) into various cell types. ICAM-1 also becomes known for its affinity for Plasmodium falciparum-infected erythrocytes (PFIE), providing more of a role in infectious disease. Previous studies have shown that ICAM-1 is involved in inflammatory reactions and that a defect in ICAM-1 gene inhibits allergic contact hypersensitivity. 2

3 PRINCIPLE OF THE TEST The Sino Biological ELISA Pair Set is a solid phase sandwich ELISA (Enzyme-Linked Immunosorbent Assay). It utilizes a monoclonal antibody specific for CD54 / ICAM1 coated on a 96-well plate. Standards and samples are added to the wells, and any CD54 / ICAM1 present binds to the immobilized antibody. The wells are washed and a horseradish peroxidase conjugated rabbit anti-cd54 / ICAM1 monoclonal antibody is then added, producing an antibody-antigen-antibody "sandwich". The wells are again washed and TMB substrate solution is loaded, which produces color in proportion to the amount of CD54 / ICAM1 present in the sample. To end the enzyme reaction, the stop solution is added and absorbances of the microwell are read at 450 nm. INTENDED USE The Mouse CD54 / ICAM1 ELISA Pair Set is for the quantitative determination of Mouse CD54 / ICAM1. This ELISA Pair Set contains the basic components required for the development of sandwich ELISAs. ASSAY PROCEDURE SUMMARY This Pair Set has been configured for research use only and is not to be used in diagnostic procedures. 3

4 MATERIALS PROVIDED Bring all reagents to room temperature before use. Capture Antibody 1.0 mg/ml of rabbit anti-mouse ICAM1 monoclonal antibody. Dilute to a working concentration of 2 μg/ml in CBS before coating. (Catalog: # R020) Detection Antibody 0.25 mg/ml rabbit anti-mouse ICAM1 monoclonal antibody conjugated to horseradish-peroxidase (HRP). Dilute to working concentration of 0.5 μg/ml in detection antibody dilution buffer before use. (Catalog: # R101) Standard Each vial contains 32 ng of recombinant mouse ICAM1. Reconstitute with 1 ml detection antibody dilution buffer. After reconstitution, store at -20 to -80 in a manual defrost freezer. A seven-point standard curve using 2-fold serial dilutions in sample dilution buffer, and a high standard of 0.4 ng/ml is recommended. SOLUTIONS REQUIRED CBS M Na 2 CO 3, 0.05M NaHCO 3, ph 9.6, 0.2 μm filtered TBS - 20 mm Tris, 150 mm NaCl, ph 7.4 Wash Buffer % Tween20 in TBS, ph Blocking Buffer - 2% BSA in Wash Buffer Sample dilution buffer - 0.1% BSA in wash buffer, ph , 0.2 μm filtered Detection antibody dilution buffer - 0.5% BSA in wash buffer, ph , 0.2 μm filtered Substrate Solution : To achieve best assay results, fresh substrate solution is recommended Substrate stock solution - 10mg / ml TMB ( Tetramethylbenzidine ) in DMSO Substrate dilution buffer M Na 2 HPO 4 and 0.025M citric acid ; adjust ph to 5.5 Substrate working solution - For each plate dilute 250 μl substrate stock solution in 25ml substrate dilution buffer and then add 80 μl 0.75% H 2 O 2, mix it well Stop Solution - 2 N H 2 SO 4 PRECAUTION The Stop Solution suggested for use with this Pair Set is an acid solution. Wear eye, hand, face, and clothing protection when using this material. 4

5 STORAGE Capture Antibody: Aliquot and store at -20 to -80 for up to 6 months from date of receipt. Avoid repeated freeze-thaw cycles. Detection Antibody: Protect it from prolonged exposure to light. Aliquot and store at -20 to - 80 and for up to 6 months from date of receipt. Avoid repeated freeze-thaw cycles. Standard: Store lyophilized standard at -20 to -80 for up to 6 months from date of receipt. Aliquot and store the reconstituted standard at -80 for up to 1 month. Avoid repeated freezethaw cycles. 5

6 GENERAL ELISA PROTOCOL Plate Preparation 1.Dilute the capture antibody to the working concentration in CBS. Immediately coat a 96-well microplate with 100μL per well of the diluted capture antibody. Seal the plate and incubate overnight at 4. 2.Aspirate each well and wash with at least 300μl wash buffer, repeating the process two times for a total of three washes. Complete removal of liquid at each step is essential for good performance. After the last wash, remove any remaining wash buffer by inverting the plate and blotting it against clean paper towels. 3.Block plates by adding 300 μl of blocking buffer to each well. Incubate at room temperature for a minimum of 1 hour. 4.Repeat the aspiration/wash as in step 2. The plates are now ready for sample addition. Assay Procedure 1.Add 100 μl of sample or standards in sample dilution buffer per well. Seal the plate and incubate 2 hours at room temperature. 2.Repeat the aspiration/wash as in step 2 of plate preparation. 3.Add 100 μl of the detection antibody, diluted in antibody dilution buffer, to each well. Seal the plate and incubate 1 hour at room temperature. 4.Repeat the aspiration/wash as in step 2 of plate preparation. 5.Add 200 μl of substrate solution to each well. Incubate for 20 minutes at room temperature ( if substrate solution is not as requested, the incubation time should be optimized ). Avoid placing the plate in direct light. 6.Add 50 μl of stop solution to each well. Gently tap the plate to ensure thorough mixing. 7.Determine the optical density of each well immediately, using a microplate reader set to 450 nm. CALCULATION OF RESULTS Calculate the mean absorbance for each set of duplicate standards, controls and samples. Subtract the mean zero standard absorbance from each. Construct a standard curve by plotting the mean absorbance for each standard on the y-axis against the concentration on the x-axis and draw a best fit curve through the points on the graph. To determine the concentration of the unknowns, find the unknowns mean absorbance value on the y- axis and draw a horizontal line to the standard curve. At the point of intersection, draw a vertical line to the x-axis and read the concentration. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor. Alternatively, computer-based curve-fitting statistical software may also be employed to calculate the concentration of the sample. 6

7 TYPICAL DATA This standard curve is only for demonstration purposes. A standard curve should be generated for each assay. PERFORMANCE CHARACTERISTIC SENSITIVITY The minimum detectable dose of Mouse CD54 / ICAM1 was determined to be approximately 6.25 pg/ml. This is defined as at least three times standard deviations above the mean optical density of 10 replicates of the zero standard. 7

8 TROUBLE SHOOTING Problems Possible Sources Solutions Incorrect or no Detection Antibody was added Add appropriate Detection Antibody and continue No signal Substrate solution was not added Add substrate solution and continue Incorrect storage condition Check if the kit is stored at recommended condition and used before expiration date Standard was incompletely reconstituted or was inappropriately stored Aliquot reconstituted standard and store at -80 Poor Standard Curve Poor detection value High Background Imprecise / inaccurate pipetting Incubations done at inappropriate temperature, timing or agitation Background wells were contaminated The concentration of antigen in samples was too low Samples were ineffective Insufficient washes TMB Substrate Solution was contaminated Check / calibrate pipettes Follow the general ELISA protocol Avoid cross contamination by using the sealer appropriately Enriching samples to increase the concentration of antigen Check if the samples are stored at cold environment. Detect samples in timely manner Use multichannel pipettes without touching the reagents on the plate Increase cycles of washes and soaking time between washes TMB Substrate Solution should be clear and colorless prior to addition to wells Materials were contaminated. Use clean plates, tubes and pipettes tips Non-specificity Samples were contaminated The concentration of samples was too high Avoid cross contamination of samples Try higher dilution rate of samples 8

9

10 Mouse ICAM-1 / CD54 ELISA Pair Set Notes