Pesticide Formulation and Delivery Systems
|
|
- Sara Dawson
- 6 years ago
- Views:
Transcription
1 Bernal Pesticide Formulation and Delivery Systems: 34th Volume, Translating Basic Science into Products STP 1579 ASTM INTERNATIONAL Selected Technical Papers Pesticide Formulation and Delivery Systems 34th Volume, Translating Basic Science into Products ASTM International STP 1579 Editor: Yasmith Bernal
2 SELECTED TECHNICAL PAPERS STP1579 Editor: Yasmith Bernal Pesticide Formulation and Delivery Systems: 34th Volume, Translating Basic Science into Products ASTM Stock #STP1579 ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA Printed in the U.S.A.
3 Library of Congress Cataloging-in-Publication Data ISBN: ISSN: Copyright 2015 ASTM INTERNATIONAL, West Conshohocken, PA. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of the publisher. Photocopy Rights Authorization to photocopy items for internal, personal, or educational classroom use, or the internal, personal, or educational classroom use of specific clients, is granted by ASTM International provided that the appropriate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, Tel: (978) ; The Society is not responsible, as a body, for the statements and opinions expressed in this publication. ASTM International does not endorse any products represented in this publication. Peer Review Policy Each paper published in this volume was evaluated by two peer reviewers and at least one editor. The authors addressed all of the reviewers comments to the satisfaction of both the technical editor(s) and the ASTM International Committee on Publications. The quality of the papers in this publication reflects not only the obvious efforts of the authors and the technical editor(s), but also the work of the peer reviewers. In keeping with long-standing publication practices, ASTM International maintains the anonymity of the peer reviewers. The ASTM International Committee on Publications acknowledges with appreciation their dedication and contribution of time and effort on behalf of ASTM International. Citation of Papers When citing papers from this publication, the appropriate citation includes the paper authors, paper title, STP title, STP number, book editor(s), page range, Paper doi, ASTM International, West Conshohocken, PA, year listed in the footnote of the paper. A citation is provided on page one of each paper. Printed in Bay Shore, NY March, 2015
4 Foreword This compilation of Selected Technical Papers, STP1579, Pesticide Formulation and Delivery Systems: 34th Volume, Translating Basic Science into Products, contains 10 peer-reviewed papers presented at a symposium held October 22-24, 2013 in Jacksonville, FL. The symposium was sponsored by ASTM International E35 on Pesticides, Antimicrobials, and Alternative Control Agents and Subcommittee E35.22 on Pesticide Formulations and Delivery Systems. The Symposium Chairperson and STP Editor is Yasmith Bernal, Oil-Dri Corporation of America, Vernon Hills, IL, USA.
5 Contents Evaluating the Adhesion of New Spreader-Sticker Adjuvants 1 Matthew T. Meredith, Terrence McIver, and Alan J. Stern Granular Carrier Effects on Volatility of Pesticide Formulations 11 Nicholas Esposito, Yasmith Bernal, and G. Robert Goss Inorganic Powders Used in Agricultural Formulations 23 Nicholas Esposito, Yasmith Bernal, and G. Robert Goss Laboratory and Field Studies of C8910, a Fatty-Acid Based Insect/ Arthropod Repellent and Biopesticide 36 William G. Reifenrath Laboratory (In Vitro) Test Method for Determining the Disposition of Chemicals in Contact with the Skin 52 William G. Reifenrath New Solvents for Agrochemical Formulations A Green Chemistry Approach 65 Fernanda de Oliveira B. Costa and Adriano Sales de Oliveira Physical and Biological Effects of Modified Polysorbate Kevin Penfield, Bryan Young, Julie Young, Greg Kruger, Ryan Henry, and Greg Lindner REACH Registration Process With Regards to Co-Formulants in Plant Protection Products 94 Ingo Fleute-Schlachter and Ralf-Peter Schuster Spray Drift Reduction Test Method Correlation 105 Curtis M. Elsik and Bradley K. Fritz Water Conditioners and Growth Regulator Herbicides 116 Donald Penner and Jan Michael
6 ASTM INTERNATIONAL Helping our world work better ISBN Stock # STP1579
Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Sixth Volume
STP 1286 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Sixth Volume James C. Myers, editor ASTM Publication Code Number.(PCN): 04-012860-10 ASTM 100 Barr Harbor Drive
More informationLimitations of Test Methods for Plas tic s
STP 1369 Limitations of Test Methods for Plas tic s James S. Peraro, editor ASTM Stock Number: STP1369 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 Printed in the U.S.A. Library of Congress Cataloging-in-Publication
More informationEffects of Radiation
Journal of ASTM International Selected Technical Papers STP 1513 Effects of Radiation on Nuclear Materials and the Nuclear Fuel Cycle 24th Volume Guest Editors Jeremy T. Busby Brady Hanson Journal of ASTM
More informationFlammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Ninth Volume
STP 1395 Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Ninth Volume T. A. Steinberg, B. E. Newton and H. D. Beeson, editors ASTM Stock Number: STP1395 ASTM 100 Barr Harbor Drive
More informationPesticide Formulations and Application Systems: 17th Volume
STP 1328 Pesticide Formulations and Application Systems: 17th Volume G. Robert Goss, Michael J. Hopkinson, and Herbert M. Collins, Editors ASTM Publication Code Number (PCN): 04-013280-48 ASTM 100 Barr
More informationPolymer-Modified Hydraulic- Cement Mixtures
STP 1176 Polymer-Modified Hydraulic- Cement Mixtures Louis A. Kuhlmann and D. Gerry Waiters, editors ASTM Publication Code Number (PCN) 04-011760-07 ASTM 1916 Race Street Philadelphia, PA 19103 Library
More informationElastic-Plastic Fracture Test Methods: The User's Experience (Second Volume)
STP 1114 Elastic-Plastic Fracture Test Methods: The User's Experience (Second Volume) James A. Joyce, editor ASTM Publication Code Number (PCN) 04-011140-30 1916 Race Street Philadelphia, PA 19103 ASTM
More informationRoofing Research and Standards Development:
Rossiter Molleti Roofing Research and Standards Development: 8th Volume ASTM INTERNATIONAL Selected Technical Papers Roofing Research and Standards Development: STP 1590 8th Volume STP 1590 Editors: Walter
More informationHigh Temperature and Environmental Effects on Polymeric Composites
STP 1174 High Temperature and Environmental Effects on Polymeric Composites Charles E. Harris and Thomas S. Gates, editors ASTM Publication Code Number (PCN) 04-011740-33 ASTM 1916 Race Street Philadelphia,
More informationCreep-Fatigue Interactions
Journal of ASTM International Selected Technical Papers STP 1539 Creep-Fatigue Interactions Test Methods and Models JAI Guest Editors: Ashok Saxena Bilal Dogan Journal of ASTM International Selected Technical
More informationPESTICIDE FORMULATIONS AND APPLICATION SYSTEMS: FIFTH VOLUME
PESTICIDE FORMULATIONS AND APPLICATION SYSTEMS: FIFTH VOLUME A symposium sponsored by ASTM Committee E-35 on Pesticides Kansas City, Mo., 7-8 Nov. 1984 ASTM SPECIAL TECHNICAL PUBLICATION 915 L. D. Spicer,
More informationScience and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fourth Volume
STP 1243 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fourth Volume David H. Nicastro, Editor ASTM Publication Code Number (PCN): 04-012430-10 ASTM 1916 Race Street Philadelphia,
More informationSteel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53
Steel Forgings: Design, Production, Selection, Testing, and Application Edward G. Nisbett ASTM Stock No. MNL53 INTERNATIONAL Standards Worldwide ASTM International 100 Barr Harbor Drive PO Box C700 West
More informationAdvances in Environmental Measurement Methods for Asbestos
STP 1342 Advances in Environmental Measurement Methods for Asbestos Michael E. Beard and Harry L. Rook, editors ASTM Stock Number: STP1342 % ASTM 100 Barr Harbor Drive West Conshohocken, PA 19428-2959
More informationMechanical, Thermal and Environmental Testing and Performance of Ceramic Composites and Components
STP 1392 Mechanical, Thermal and Environmental Testing and Performance of Ceramic Composites and Components Michael G. Jenkins, Edgar Lara-Curzio, and Stephen T. Gonczy, editors ASTM Stock Number: STP1392
More informationNew Methods for Corrosion Testing of Aluminum Alloys
STP 1134 New Methods for Corrosion Testing of Aluminum Alloys Vinod S. Agarwala and Gilbert M. Ugiansky, editors ASTM Publication Code Number (PCN) 04-011340-27 ASTM 1916 Race Street Philadelphia, PA 19103
More informationSuperfund Risk Assessment in Soil Contamination Studies
STP 1158 Superfund Risk Assessment in Soil Contamination Studies Keith B. Hoddinott, editor ASTM Publication Code Number (PCN) 04-011580-38 ASTM 1916 Race Street Philadelphia, PA 19103 Library of Congress
More informationStructural Integrity of Fasteners: Second Volume
STP 1391 Structural Integrity of Fasteners: Second Volume Pir M. Toor, editor ASTM Stock Number: STP 1391 ASTM 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 Printed in the U.S.A. Library of Congress
More informationSignificance of Tests and Properties of Concrete and Concrete-Making Materials
Significance of Tests and Properties of Concrete and Concrete-Making Materials STP 169D Joseph F. Lamond and James H. Pielert, Editors ASTM Stock No.: STP169D ASTM International 100 Barr Harbor Drive PO
More informationWELDING INSPECTION TECHNOLOGY
WELDING INSPECTION TECHNOLOGY FIFTH EDITION 2008 Published by American Welding Society Education Department Education Services WELDING INSPECTION TECHNOLOGY DISCLAIMER The American Welding Society, Inc.
More informationSpecification for the Application of Thermal Spray Coatings to Machine Elements for OEM and Repair
This is a preview of "AWS C2.19/C2.19M:201...". Click here to purchase the full version from the ANSI store. AWS C2.19/C2.19M:2013 An American National Standard Specification for the Application of Thermal
More informationGALVANIC AND PITTING CORROSION-FIELD AND LABORATORY STUDIES
GALVANIC AND PITTING CORROSION-FIELD AND LABORATORY STUDIES Two symposia presented at the 1974 Materials Engineering Congress AMERICAN SOCIETY FOR TESTING AND MATERIALS Detroit, Mich., 22-23 Oct. 1974
More informationHAZARDOUS AND INDUSTRIAL SOLID WASTE TESTING FOURTH SYMPOSIUM
HAZARDOUS AND INDUSTRIAL SOLID WASTE TESTING FOURTH SYMPOSIUM A symposium sponsored by ASTM Committee D-34 on Waste Disposal Arlington, VA, 2-4 May 1984 ASTM SPECIAL TECHNICAL PUBLICATION 886 James K.
More informationHydraulic Conductivity and Waste Contaminant Transport in Soil
STP 1142 Hydraulic Conductivity and Waste Contaminant Transport in Soil David E. Daniel and Stephen J. Trautwein, Editors ASTM Publication Code Number (PCN) 04-011420-38 ASTM 1916 Race Street Philadelphia,
More informationSurface-Crack Growth: Models,
STP 1060 Surface-Crack Growth: Models, Experiments, and Structures Walter G. Reuter, John H. Underwood, and James C. Newman, Jr., editors ASTM 1916 Race Street Philadelphia, PA 19103 Library of Congress
More informationPesticide Formulations And Application Systems STP1400 (Astm Special Technical Publication// Stp) By R. Scott Tann(Editor);Jane C.Mueninghoff Alan K.
Pesticide Formulations And Application Systems STP1400 (Astm Special Technical Publication// Stp) By R. Scott Tann(Editor);Jane C.Mueninghoff Alan K. Viets (Editor) If you are searched for the ebook Pesticide
More informationHydraulic Failure Analysis: Fluids, Components, and System Effects
STP 1339 Hydraulic Failure Analysis: Fluids, Components, and System Effects George E. Totten, David K. Wills, and Dierk G. Feldmann, editors ASTM Stock Number: STP1339 ASTM PO Box C700 100 Barr Harbor
More informationComparative World. Standards. Handbook of. 5th Edition. John E. Bringas, Editor. Bringas. 5th Edition. Handbook of ASTM INTERNATIONAL DS67D
Bringas Handbook of Comparative World Steel Standards The book editor, John E. Bringas, P.Eng., is president and founder of Codes and Standards Training Institute (CASTI), headquartered in Edmonton, Alberta,
More informationTesting and Acceptance Criteria for Geosynthetic Clay Liners
STP 1308 Testing and Acceptance Criteria for Geosynthetic Clay Liners Larry W. Well, editor ASTM Publication Code Number (PCN): 04-013080-38 As. 100 Ban" Harbor Drive West Conshohocken, PA 19428-2959 Printed
More informationELASTIC-PLASTIC FRACTURE TEST METHODS: THE USER'S EXPERIENCE
ELASTIC-PLASTIC FRACTURE TEST METHODS: THE USER'S EXPERIENCE A symposium sponsored by ASTM Committee E-24 on Fracture Testing Louisville, KY, 20-22 April 1983 ASTM SPECIAL TECHNICAL PUBLICATION 856 E.
More informationMiCon 86: OPTIMIZATION OF PROCESSING, PROPERTIES, AND SERVICE PERFORMANCE THROUGH MICROSTRUCTURAL CONTROL
MiCon 86: OPTIMIZATION OF PROCESSING, PROPERTIES, AND SERVICE PERFORMANCE THROUGH MICROSTRUCTURAL CONTROL A symposium sponsored by ASTM Committee E-4 on Metallograpliy Philadelphia, Pa., 15-16 May 1986
More informationPolymer Modified Asphalt Binders
STP 1108 Polymer Modified Asphalt Binders Kenneth R. Wardlaw and Scott Shuler, editors ASTM Publication Code Number (PCN) 04-011080-08 As M 1916 Race Street Philadelphia, PA 19103 Library of Congress Catalogtng-in-Pub
More informationTHESAURUS ON RESOURCE RECOVERY TERMINOLOGY
THESAURUS ON RESOURCE RECOVERY TERMINOLOGY Sponsored by ASTM Committee E-38 on Resource Recovery ASTM SPECIAL TECHNICAL PUBLICATION 832 Herbert 1. Hollander Sanders & Thomas, Inc. editor ASTM Publication
More informationATMOSPHERIC CORROSION INVESTIGATION OF ALUMINUM-COATED, ZINC-COATED AND COPPER-BEARING STEEL WI RE AN D WI RE PRODUCTS: A TWENTY- YEAR REPORT
ATMOSPHERIC CORROSION INVESTIGATION OF ALUMINUM-COATED, ZINC-COATED AND COPPER-BEARING STEEL WI RE AN D WI RE PRODUCTS: A TWENTY- YEAR REPORT Sponsored by ASTM Committee A-5 on Metallic-Coated Iron and
More informationAWS EG2.0:2008. Guide for the Training of Welding Personnel: Level I Entry Welder
Guide for the Training of Welding Personnel: Level I Entry Welder Guide for the Training of Welding Personnel: Level I Entry Welder Supersedes EG2.0-95 Revision Nov. 2008 Prepared by the American Welding
More informationEDITED BY A.T. TABEREAUX P.N. CREPEAU J.N. BRUGGEMAN
ALUMINUM REDUCTION POTROOM OPERATIONS EDITED BY A.T. TABEREAUX P.N. CREPEAU J.N. BRUGGEMAN ALUMINUM REDUCTION POTROOM OPERATIONS EDITED BY A.T. Tabereaux P.N. Crepeau J.N. Bruggeman Proceedings of a symposium
More informationStandard Test Method for Carbon Black Tint Strength 1
Designation: D 3265 03 Standard Test Method for Carbon Black Tint Strength 1 This standard is issued under the fixed designation D 3265; the number immediately following the designation indicates the year
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 148-1 Third edition 2016-10-15 Metallic materials Charpy pendulum impact test Part 1: Test method Matériaux métalliques Essai de flexion par choc sur éprouvette Charpy Partie
More informationThe GMO Handbook. Genetically Modified Animals, Microbes, and Plants in Biotechnology. Edited by. Sarad R. Parekh, PhD
The GMO Handbook The GMO Handbook Genetically Modified Animals, Microbes, and Plants in Biotechnology Edited by Sarad R. Parekh, PhD Dow AgroSciences, Indianapolis, IN * Springer Science+Business Media,
More informationVERTEBRATE PEST CONTROL AND MANAGEMENT MATERIALS
VERTEBRATE PEST CONTROL AND MANAGEMENT MATERIALS Proceedings of the Second Symposium on Test Methods for Vertebrate Pest Control and l\/lanagement Materials A symposium sponsored by ASTM Committee E-35
More informationPOWER PLANT INSTRUMENTATION FOR MEASUREMENT OF HIGH-PURITY WATER QUALITY
POWER PLANT INSTRUMENTATION FOR MEASUREMENT OF HIGH-PURITY WATER QUALITY A symposium sponsored by ASTM Committee D-19 on Water AMERICAN SOCIETY FOR TESTING AND MATERIALS Milwaukee, Wis., 9-10 June 1980
More informationRadiographic Inspection
The Practical Reference Guide for Radiographic Inspection Acceptance Criteria THE PRACTICAL REFERENCE GUIDE for RADIOGRAPHIC INSPECTION ACCEPTANCE CRITERIA Located, reviewed and reformatted under the AWS
More informationJOHN BASCHAB JON PIOT
T H E PROFESSIONAL SERVICES FIRM BIBLE JOHN BASCHAB JON PIOT John Wiley & Sons, Inc. T H E PROFESSIONAL SERVICES FIRM BIBLE T H E PROFESSIONAL SERVICES FIRM BIBLE JOHN BASCHAB JON PIOT John Wiley & Sons,
More informationManual of Petroleum Measurement Standards Chapter 11 Physical Properties Data
Manual of Petroleum Measurement Standards Chapter 11 Physical Properties Data Section 2, Part 5 A Simplified Vapor Pressure Correlation for Commercial NGLs ASTM Technical Publication [Stock No. PETROLTBL-TP15]
More informationAWS G1.2M/G1.2:1999 (R2010) An American National Standard. Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
An American National Standard Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics An American National Standard Approved by the American National Standards Institute August
More informationDiatomaceous Earth Filtration for Safe Drinking Water
Diatomaceous Earth Filtration for Safe Drinking Water GEORGE P. FULTON American Society of Civil Engineers 1801 Alexander Bell Drive Reston, Virginia 20191-4400 Abstract: First adopted by the U.S. Army
More informationTHE PRACTICAL REFERENCE GUIDE for WELDING TITANIUM
THE PRACTICAL REFERENCE GUIDE for WELDING TITANIUM Compiled/Edited/Written by Eugene G. Hornberger Consultant Hampton, Virginia This publication is designed to provide information in regard to the subject
More informationFor more information on any of the above titles, please visit
ESSENTIALS of XBRL Financial Reporting in the 21st Century Bryan Bergeron John Wiley & Sons, Inc. ESSENTIALS of XBRL Essentials Series The Essentials Series was created for busy business advisory and
More informationStandard Guidelines for the Design and Installation of Pile Foundations
ASCE 20-96 American Society of Civil Engineers Downloaded from ascelibrary.org by 46.3.199.16 on 01/25/18. Copyright ASCE. For personal use only; all rights reserved. Standard Guidelines for the Design
More information5l'Ar American Society
SEISMIC SCREENING CHECKLISTS FOR WATER AND WASTEWATER FACILITIES EDITED BY William F. Heubach Technical Council on Lifeline Earthquake Engineering Water and Wastewater Committee Monograph No. 22 September
More informationMoe Finke. Proprietary Product Manager VM, Forestry & Aquatics Loveland Products
Moe Finke Proprietary Product Manager VM, Forestry & Aquatics Loveland Products Characteristics and Use of Surfactants Adjuvant Anything that modifies the spray tank characteristics Adjuvant Considerations
More informationPublished Turf Weeds and Their Control
Published 1994 Turf Weeds and Their Control Related Society Publications Turfgrass, Agronomy Monograph 32 Contributions from Breeding Forage and Turf Grasses, CSSA Special Publication Number 15 CSSA Slide
More informationPLANE STRAIN CRACK TOUGHNESS TESTING OF HIGH STRENGTH METALLIC MATERIALS
PLANE STRAIN CRACK TOUGHNESS TESTING OF HIGH STRENGTH METALLIC MATERIALS by William F. Brcwn, Jr., and John E. Srawiey ASTM SPECIAL TECHNICAL PUBLICAT'ON NO. 410 List price $5.50; 30 per cent discount
More informationProgress of Superpave (Superior Performing Asphalt Pavement): Evaluation and Implementation
STP 1322 Progress of Superpave (Superior Performing Asphalt Pavement): Evaluation and Implementation Robert N. Jester, editor ASTM Publication Code Number (PCN): 04-013220-08 ASTM 100 Barr Harbor Drive
More informationStandard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals 1
Designation: B499 09 (Reapproved 2014) Endorsed by American Electroplaters Society Endorsed by National Association of Metal Finishers Standard Test Method for Measurement of Coating Thicknesses by the
More informationARQUIVOS BRASILEIROS DE CARDIOLOGIA (BRAZILIAN ARCHIVES OF CARDIOLOGY) GUIDELINES FOR PUBLICATION
ARQUIVOS BRASILEIROS DE CARDIOLOGIA (BRAZILIAN ARCHIVES OF CARDIOLOGY) GUIDELINES FOR PUBLICATION 1. The Brazilian Archives of Cardiology (Arq Bras Cardiol) is a monthly publication of the Brazilian Society
More informationCorrosion Testing and Evaluation: Silver Anniversary Volume
STP 1000 Corrosion Testing and Evaluation: Silver Anniversary Volume Robert Baboian and Sheldon W. Dean, editors AsTM 1916 Race Street Philadelphia, PA 19103 Library of Congress Cataloging-in-Publication
More informationAWS D14.3/D14.3M:2010 An American National Standard. Specification for Welding Earthmoving, Construction, and Agricultural Equipment
An American National Standard Specification for Welding Earthmoving, Construction, and Agricultural Equipment An American National Standard Approved by the American National Standards Institute May 26,
More informationA symposium sponsored by ASTM Committee A-1 on Steel, Stainless Steel, and Related Alloys Williamsburg, VA, Nov. 1984
STEEL FORGINGS A symposium sponsored by ASTM Committee A-1 on Steel, Stainless Steel, and Related Alloys Williamsburg, VA, 28-30 Nov. 1984 ASTM SPECIAL TECHNICAL PUBLICATION 903 Edward G. Nisbett, National
More informationARQUIVOS BRASILEIROS DE CARDIOLOGIA (BRAZILIAN ARCHIVES OF CARDIOLOGY) GUIDELINES FOR PUBLICATION
1 ARQUIVOS BRASILEIROS DE CARDIOLOGIA (BRAZILIAN ARCHIVES OF CARDIOLOGY) GUIDELINES FOR PUBLICATION 1. The Brazilian Archives of Cardiology (Arq Bras Cardiol) is a monthly publication of the Brazilian
More informationCOMPOSITE MATERIALS: TESTING AND DESIGN (FIFTH CONFERENCE)
COMPOSITE MATERIALS: TESTING AND DESIGN (FIFTH CONFERENCE) A conference sponsored by the AMERICAN SOCIETY FOR TESTING AND MATERIALS New Orleans, La., 20-22 March 1978 ASTM SPECIAL TECHNICAL PUBLICATION
More informationS terile. Injections HANDBOOK OF PHARMACEUTICAL. VOLUME 20 - Part One Drug Development - Sterile Injections GENERIC DEVELOPMENT
HANDBOOK OF PHARMACEUTICAL GENERIC DEVELOPMENT S terile Injections VOLUME 20 - Part One Drug Development - Sterile Injections GENERIC DEVELOPMENT Handbook of Pharmaceutical Generic Development Series Sterile
More informationStandard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics 1
Designation: D 623 03 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics This standard is issued under the fixed designation D 623; the number immediately following
More informationTHE TRAINER S BALANCED SCORECARD. Ajay M. Pangarkar Teresa Kirkwood. Foreword by Dr. David Norton
Essential resources for training and HR professionals THE TRAINER S Ajay M. Pangarkar Teresa Kirkwood Foreword by Dr. David Norton BALANCED SCORECARD A Complete Resource for Linking LEARNING to ORGANIZATIONAL
More informationANSI Z49.1:2012 An American National Standard. Safety in Welding, Cutting, and Allied Processes
An American National Standard Safety in Welding, Cutting, and Allied Processes An American National Standard Approved by the American National Standards Institute March 9, 2012 Safety in Welding, Cutting,
More informationBio-Inspired Wettability Surfaces
Yongmei Zheng Bio-Inspired Wettability Surfaces Bio-Inspired Wettability Surfaces Developments in Microand Nanostructures Yongmei Zheng Published by Pan Stanford Publishing Pte. Ltd. Penthouse Level,
More informationCONTENTS. Acknowledgments... iv. 1: Introduction : Why have organizations chosen to seek compliance with the Standards?...2
IIA STANDARD 1312 - EXTERNAL QUALITY ASSESSMENTS: RESULTS, TOOLS, TECHNIQUES AND LESSONS LEARNED THE IIA RESEARCH FOUNDATION JULY 2007 Disclosure Copyright 2007 by The Institute of Internal Auditors Research
More informationDesigning Glass to Resist Wind and Snow Loads
One of the design requirements of glass used in buildings is to resist the loads created by wind and snow. ASTM E1300-02: Standard Practice for Determining Load Resistance of Glass in Buildings provides
More informationIT and Enterprise Governance By Michael J. A. Parkinson, CISA, CIA, and Nicholas J. Baker, CPA
Copyright 2005 Information Systems Audit and Control Association. All rights reserved. www.isaca.org. IT and Enterprise Governance By Michael J. A. Parkinson, CISA, CIA, and Nicholas J. Baker, CPA Enterprise
More informationStandard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics 1
Designation: D 955 00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics 1 This standard is issued under the fixed designation D 955; the number immediately following the
More informationSubject Index. STP968-EB/J ul. 1987
STP968-EB/J ul. 1987 A Active ingredient alternative sources for, 220-221 Agglomeration granule formulation, 199-201 Agricultural chemicals See also Herbicides; Pesticides application of, 13-14 registration
More informationThis is a preview of "AWS PRGWM-99". Click here to purchase the full version from the ANSI store. The Practical Reference Guide to
This is a preview of "AWS PRGWM-99". Click here to purchase the full version from the ANSI store. The Practical Reference Guide to Welding Metallurgy Key Concepts for Weldability THE PRACTICAL REFERENCE
More informationSarbanes-Oxley and the New Internal Auditing Rules
Sarbanes-Oxley and the New Internal Auditing Rules ROBERT R. MOELLER John Wiley & Sons, Inc. Sarbanes-Oxley and the New Internal Auditing Rules Sarbanes-Oxley and the New Internal Auditing Rules ROBERT
More informationAWS D8.2M:2017 An American National Standard. Specification for Automotive Weld Quality Resistance Spot Welding of Aluminum
An American National Standard Specification for Automotive Weld Quality Resistance Spot Welding of Aluminum An American National Standard Approved by American National Standards Institute March 9, 2017
More informationPrinciples and Practice of Toxicology in Public Health
Principles and Practice of Toxicology in Public Health Ira S. Richards, PhD Associate Professor Environmental and Occupational Health College of Public Health University of South Florida World Headquarters
More informationCredit Risk Scorecards
Credit Risk Scorecards Developing and Implementing Intelligent Credit Scoring Naeem Siddiqi John Wiley & Sons, Inc. Additional praise for Credit Risk Scorecards... An essential book for anyone interested
More informationRotary batch mixer yields high-quality blends for powder metallurgy
DRY BULK BLENDING EQUIPMENT Rotary Batch Mixers Ribbon/Paddle/ Plow Blenders Rotary Continuous Blenders High Intensity Continuous Blenders Vee-Cone Blenders Fluidized Bed Mixers SIZE REDUCTION EQUIPMENT
More informationISO/IEC INTERNATIONAL STANDARD. Systems and software engineering System life cycle processes IEEE
INTERNATIONAL STANDARD ISO/IEC 15288 IEEE Std 15288-2008 Second edition 2008-02-01 Systems and software engineering System life cycle processes Ingénierie des systèmes et du logiciel Processus du cycle
More information2016 International Conference on Information Management and Technology (ICIMTech 2016)
2016 International Conference on Information Management and Technology (ICIMTech 2016) Bandung, Indonesia 16-18 November 2016 IEEE Catalog Number: ISBN: CFP16H83-POD 978-1-5090-3353-9 Copyright 2016 by
More informationChina s Energy. Industrial Map of. Industrial Map of China's Energy Downloaded from
Industrial Map of China s Energy This page intentionally left blank Industrial Map of China s Energy China Industrial Map Editorial Committee China Economic Monitoring & Analysis Center World Scientific
More informationStandard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1
Designation: A69 06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1 This standard is issued under the fixed designation A69; the number immediately
More informationISO INTERNATIONAL STANDARD. Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron
INTERNATIONAL STANDARD ISO 15726 First edition 2009-02-01 Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron Revêtements métalliques et autres revêtements inorganiques
More informationStandard Practice. Control of Corrosion Under Thermal Insulation and Fireproofing Materials A Systems Approach
NACE SP0198-2010 (formerly RP0198) Item No. 21084 Standard Practice Control of Corrosion Under Thermal Insulation and Fireproofing Materials A Systems Approach This standard represents a consensus of those
More informationExecutive Compensation Best Practices
Executive Compensation Best Practices Frederick D. Lipman Steven E. Hall John Wiley & Sons, Inc. Executive Compensation Best Practices Executive Compensation Best Practices Frederick D. Lipman Steven
More informationStandard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) 1
Designation: D 1754 97 Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) 1 This standard is issued under the fixed designation D 1754; the number immediately
More informationTechnical Report. Calculated R-Values for Hybrid Insulation Assemblies that Contain Hy-Fi Reflective Insulation
Technical Report Calculated R-Values for Hybrid Insulation Assemblies that Contain Hy-Fi Reflective Insulation Prepared For: Mr. Bill Lippy Fi-Foil Company, Inc. P.O. Box 800 612 Bridgers Ave. West Auburndale,
More informationMinimizing Pesticide Spray Drift
1/6/18 Minimizing Pesticide Spray Drift Improper Application of Dicamba A Look Back at 17 Tim Schnakenberg Regional Agronomy Specialist Galena, MO 417-357-681 Sections of this program have been adapted
More informationFracture and Fatigue Control in Structures:
Fracture and Fatigue Control in Structures: Applications of Fracture Mechanics Third Edition John M. Barsom Stanley T. Rolfe ASTM Stock Number: MNL41 ASTM 100 Barr Harbor Drive West Conshohocken, PA 19428-2959
More informationDNA Microarray Technology and Data Analysis in Cancer Research Downloaded from
This page intentionally left blank Shaoguang Li University of Massachusetts Medical School, USA Dongguang Li Edith Cowan University, Australia World Scientific N E W J E R S E Y L O N D O N S I N G A P
More informationStandard Test Method for Adhesion Between Steel Tire Cords and Rubber 1
Designation: D 2229 02 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber 1 This standard is issued under the fixed designation D 2229; the number immediately following the designation
More informationThe 2009 Communicating Employee Benefits Workshops Achieving Results During Changing Times
The 2009 Communicating Employee Benefits Workshops Achieving Results During Changing Times The Conference Board Headquarters New York, NY Strategic Employee Benefits Communication: From Challenge to Opportunity
More informationAutomated Translation Suppliers
Automated Translation Suppliers Software Offerings of Machine Translation Software Developers By Donald A. DePalma and Robert J. Kuhns By Donald A. DePalma and Robert J. Kuhns ISBN: 1-933555-32-7 Copyright
More informationStandard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer 1
Designation: C 145/C 145M 05 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer 1 This standard is issued under the fixed designation C 145/C 145M; the number
More informationFOREST POLICY ANALYSIS
FOREST POLICY ANALYSIS FOREST POLICY ANALYSIS by MAX KROTT Institute for Forest Policy and Nature Conservation, Göttingen, Germany Translated by Renée von Paschen EUROPEAN FOREST INSTITUTE A C.I.P. Catalogue
More informationMICROBIOLOGICAL CULTURE MEDIA
MICROBIOLOGICAL CULTURE MEDIA A COMPLETE GUIDE FOR PHARMACEUTICAL AND HEALTHCARE MANUFACTURERS Tim Sandle Microbiological Culture Media: A Complete Guide for Pharmaceutical and Healthcare Manufacturers
More informationStandard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range 1
Designation: D 2265 00 An American National Standard Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range 1 This standard is issued under the fixed designation D 2265;
More informationStandard for Forensic DNA Analysis Training Programs
ASB Standard 022, First Edition 2018 Standard for Forensic DNA Analysis Training Programs This document is copyrighted by the AAFS Standards Board, LLC. 2017 All rights are reserved. 410 North 21st Street,
More informationASTM. publish D6400 ? 2: What. cellulose, more glucose
Compostability Paper and ASTM publish s D6400 m? 2: What cellulose, more glucose carbohydrate polysaccharide matter 10405 E. 55th Pl. Tulsa OK 74146 Tel cotton 800-228-1936 Fax 888-473-3224 of wood digestion
More informationGuideline for Structural Condition Assessment of Existing Buildings
SEI/ASCE11-99 Structural Engineering Institute American Society of Civil Engineers Guideline for Structural Condition Assessment of Existing Buildings This document uses both Systeme International (SI)
More informationAn Introduction to Trenchless Technology
An Introduction to Trenchless Technology An Introduction to Trenchless Technology Steven R. Kramer William J. McDonald James C. Thomson m CHAPMAN & HALL New York London DISCLAIMER-LEGAL NOTICE This book
More information