QT-Brightek Lamp with Housing Series. 3mm Bi-Color Round Lamp with Bi-level Housing

Transcription

1 QT-Brightek Lamp with Housing Series 3mm Bi-Color Round Lamp with Bi-level Housing Part No.: QLA694B-XX_series Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 1 of 9

2 Table of Contents: Introduction... 3 Electrical / Optical Characteristic (Ta=25 o C)... 4 Absolute Maximum Rating... 4 Characteristic Curves... 5 Labeling... 8 Ordering Information... 8 Revision History... 9 Disclaimer... 9 Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 2 of 9

3 Introduction Feature: White Diffused lens Packaged in bulk pack 3mm round TH lamp with housing GaAsP technology for Yellow, red GaP technology for Yellow-Green Viewing angle: 100º typ. Description: These 3mm Bi-color round type lamps with bi-level housing is easy to mount on the panels. Application: General purpose indicator application Electronic instrument Certification & Compliance: TS16949 ISO9001 RoHS Compliant Dimension: Units: mm / general tolerance = +/-0.5mm unless otherwise specified Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 3 of 9

4 Electrical / Optical Characteristic (Ta=25 o C) Product QLA694B-HG QLA694B-HY QLA694B-GY First Color VF (V) λd (nm) IV (mcd) IF (ma) Second Color Typ. Max. Min. Typ. Max. Min. Typ. GaAsP Red GaP Green GaAsP Red Yellow GaP Green Yellow Absolute Maximum Rating Material Pd (mw) IF (ma) IFP (ma)* VR (V) TOP ( o C) TST ( o C) TSOL ( o C)** AlGaAs to to GaAsP to to GaP to to *Duty=0.1, 0.1ms Pulse Width **Wave Soldering for no more than o C Note: Tolerance of measurement of forward voltage: ±0.1V Tolerance of measurement of luminous intensity: ±15% Tolerance of measurement of dominant wavelength: ±2nm Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 4 of 9

5 Characteristic Curves GaAsP Red Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 5 of 9

6 GaAsP Yellow Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 6 of 9

7 GaP Yellow-Green Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 7 of 9

8 Labeling Ordering Information Part # Orderable Part # Spec Range QLA694B-HG QLA694B-HY QLA694B-GY QLA694B-HG QLA694B-HY QLA694B-GY Iv=13mcd 20mA, λd=630nm typ.; Iv=20mcd 20mA, λd=570nm typ. Iv=13mcd 20mA, λd=630nm typ.; Iv=13mcd 20mA, λd=588nm typ. Iv=20mcd 20mA, λd=570nm typ.; Iv=13mcd 20mA, λd=588nm typ. Quantity per bag Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 8 of 9

9 Revision History Description: Revision # Revision Date New Release of QLA694B-XX_series V1.0 06/24/2016 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBL7XXXX100D-MP91Y_series Date: June 24, 2016 Page 9 of 9