CertaFluxPLM II Gen1 April. 2014

Transcription

1 CertaFluxPLM II Gen1 April. 2014

2 Introduction to the Certaflux PLM II Gen1 Applications The Philips CertaFlux PLM II Gen1 has been developedd primarily for outdoor applications. Product description To operate a system you will need the following products, which are sold separately: One or more CertaFlux PLM IILED modules, Table1 Specified connectors, Table1 Compatible Xitanium LED driver, Table 2 Figure 1. CertaFlux PLM IIGen1 Classification The CertaFlux PLM II Gen1 with Xitanium driver listed below can be used in: Classs I IEC isolation systems Figure 2. CertaFlux PLM 1-3 multi-connector IMPORTANT USAGE NOTES Tcase,max must not exceed 75 C for Ta 30 o C T (Tambient-Tcase) must not exceed 45 C Failure to comply with usage conditions will void product warranty The CertaFlux PLM II system components Figure 3. CertaFlux PLM 1-5 multi-connector Table 1. CertaFlux PLM II and 1-n multi-connector Product CertaFlux PLM II 3000lm 740 Gen1 CertaFlux PLM II 3000lm 850 Gen1 CertaFlux PLM 1-3 multi-connector CertaFlux PLM 1-5 multi-connector GPC CertaFlux PLM II system with Xitanium LED drivers, Class I The following drivers are highly recommended to operate thecertafluxplm IIoutdoor modules.if other drivers are connected to PLM II, please contact with your local sales representativee for further confirmation, it can void warranty. Table 2. CertaFlux PLM II system with fixed Xitanium LED drivers, Class I compliant 1

3 Number of CertaFlux PLM II (any type) Max output current (ma) Driver GPC Cable 3x-5x 700 Xitanium150W 0.70A 230V IP x CertaFlux PLM 1-5 multi-connector Xitanium 150W 0.70A 230V-6P I x CertaFlux PLM 1-3 multi-connector Xitanium150W 0.70A 1-10V IP x 700 Xitanium 75W 0.70A 230VIP x CertaFlux PLM 1-3 multi-connector Xitanium 75W 0.70A 230V-3P I x 700 Xitanium 50W 0.7A 230V IP No additional Cable needed Table2 includes fix output and single output dimmable drivers, for non IP66 drivers i.e. IP42 150W, please contact with local sale representative. As the Xitanium LED driver portfolio is always expanding to include new products, please visit or contact your Philips sales representatives for the latest system combinations. 2

4 Performance specification The following paragraphs contain the performance specifications of the CertaFluxPLM IIGen1 modules. Typical operating conditions Table 3. Typical operating conditions Item Symbol Unit Value Description Default Driver current Idriver ma 700 Fixed output driver current Case temperature Tcase C 65 Case temperature: typical temperature at which the module operates within specs Ambient temperature Tamb C 30 Ambient temperature outside luminaire Note: Philips maintains a tolerance of ±6.5% on luminous flux measurements, ±0.06 V on forward voltage measurements, ±2 on CRI measurements and ±5% on CCT measurements Performance specifications CertaFlux PLM II 3000lm 740 Gen1 CertaFlux PLM II 3000lm 740 Gen1performance at 700mA and T case = 65 C Table 4. Performance specification of the CertaFlux PLM II 3000lm 740 Gen1under typical operating conditions (If = 700 ma and Tcase = 65 C). Item Min Typ Max Unit Initial lumen output lm Initial efficacy lm/w Forward voltage V Initial power consumption W Correlated Color Temperature (CCT) K Color Rendering Index (CRI) 70 - Ra Initial color accuracy - 6 SDCM Operating Ta range o C Weight 0.6 Kg Approbation IP rating Insulation class CQC,CE,CB, ENEC IP66 III 3

5 IMPORTANT USAGE NOTES PLM Systems with recommended Xitaniumdrivers should be installed in Class I luminaires only. For Class II luminaires additional isolation layer for the driver is needed. Design-in support is available please contact your local Philips sales representative for additional information. Figure4. Estimated module flux and module efficacy of the CertaFlux PLM II 3000lm 740 Gen1under typical driver current 700 ma and various case Temperatures (Tcase) Performance specifications CertaFlux PLM II 3000lm 850 Gen1 CertaFlux PLM II 3000lm 850 Gen1 performance at 700mA and T case = 65 C Table 5. Performancee specification of the CertaFlux PLM II 3000lm 850 under typical operating conditions (If = 700 ma and Tcase = 65 C). Item Min Typ Max Unit Initial lumen output lm Initial efficacy lm/w Forward voltage V Initial power consumption W Correlated color temperature (CCT) K Color Rendering Index (CRI) Initial color accuracy Operating Ta range Weight Approbation IP rating Insulation class CQC,CE,CB, ENEC IP66 III - Ra R 6 SDCM 50 oc 0.6 Kg 4

6 IMPORTANT USAGE NOTES PLM Systems with recommended Xitanium drivers should be installed in Class I luminaires only. Figure 5. Estimated module flux and module efficacy of the CertaFlux PLM II 3000lm 850 Gen1under typical driver current 700 ma and various case Temperatures (Tcase) Specified lifetime performance Figures 6. show the expected lumen maintenance over a typical product (both 850 and 740 as well) lifetime 5

7 Optical distributions Optical performance of CertaFluxPLM II Gen1 Figure 7. CertaFluxPLM II Figures 8. Polar intensity diagram, PLM II Gen1 PLM II is designed for narrow roads and urban street lighting. Figure 9.Example of application rendering, PLM II N.B. Component and process tolerances can result in imperfectly symmetrical light distributions. Maximum acceptable tolerances will have minimal impact on optical distributions and optical performance in the final application for a variety of reasons ( e.g. light from neighboring poles, flux differences < 20% not visible for the human eye). 6

8 All polar intensity diagramillustrations are just an indication of the beam shape. We suggest making use of the IES files available on the CertaFlux PLM II module website. Recommendations for SON-T replacements The recommendations are made by means of Dialux simulations for specific road examples as mentioned in tables x,x x. The road width (w), pole height (H), pole distance (P), tilt angle (T) and overhang (O) are specified per application. For road properties the following settings have been used for all three applications; Road type: Asphalt pavement ;Reflection table: CIE R3; Q0 of table: 0.07; Figure 10: Specified installation parameters SON-T 150W replacement solution We propose to replacee a 150W SON-T conventional luminaire with a system of 3 x PLM 3000lm and 1 Xitanium 150W IP67driver. The recommended system can meet the requirement of standard for lighting design of urban road in China. Remark: CJJ is regulation of China Figure 11: Application rendering of 10m road with single installation SON-T 250W replacement solution We propose to replacee a 250W SON-T conventional luminaire with a system of 5 x PLM 3000lm and 1 Xitanium 150W IP67driver. The recommended system can meet the requirement of standard for lighting design of urban road in China. Figure 12: Application rendering of 15m road with single installation 7

9 SON-T 400W replacement solution We propose to replacee a 400W SON-T conventional luminaire with a system of 8 x PLM 3000lm and 2 Xitanium 150W IP67 drivers. The recommendedd system can meet the requirement of standard for lighting design of urban road in China. Figure 13: Application rendering with double installation of 19m road and central reserve Figure 14: Road application with 4 lanes and central reserve 8

10 Cie y CRI K 6.0 SDCM CRI K 6.0 SDCM BBL Cie x

11 Product dimensions Dimensions of CertaFlux PLM II Figure 16.CertaFlux PLM II (any type) Module Type A1 A2 B1 C1 C2 D1 CertaFlux PLM II 3000lm Gen Dimensions of connecting cable Figure17. CertaFlux PLM 1-3 multi-connector Figure 18. CertaFlux PLM 1-5 multi-connector 10

12 2014 Philips Lighting All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. 04/2014