OWAtecta. OWA metal ceilings. OWAtecta metal ceilings

Transcription

1 OWAtecta OWA metal ceilings OWAtecta metal ceilings

2

3 3 OWAtecta metal ceilings Contents Inhalt Perforations steel... Perforations aluminium... 5 Edges Technical information... 7 Systems System S 7M cell ceiling... 9 System S 9M baffle ceiling... System S clip-in System S 33 lay-in... 5 System S 36 Progress... 7 System S 38M wedge ceiling... 9 System S 39M hook-on... System S 39 Mesh hook-on... 3 System S 5 lay-in... 5 System S 5b OWAline... 7 System S 5b Trapeze... 9 System S 9M mesh ceiling... 3

4 Perforations steel a W = 0.05 NRC = 0.05 a W = 0.55 NRC = 0.55 L0 un-perforated Rg070 Ø = 0.7 mm % open area Ø.5 Rd5 Ø =.5 mm % open area Rg56 Ø =.5 mm 6 % open area 5.5 Ø Ø Ø a W = 0.70 NRC = 0.70 a W = 0.80 NRC = 0.75 a W = 0.80 NRC = 0.80 Rv336 Ø = 3. mm 36 % open area More perforations on request

5 5 Perforations aluminium a W = 0.05 NRC = 0.05 a W = 0.55 NRC = 0.55 Ø L0 un-perforated Rg070 Ø = 0.7 mm % open area a W = 0.65 NRC = 0.60 a W = 0.80 NRC = 0.75 Ø Ø Rd80 Ø =.8 mm 0 % open area Rg56 Ø =.5 mm 6 % open area a W = 0.60 NRC = 0.60 Ø Rg090 Ø = 0.9 mm % open area More perforations on request

6 6 Edges K 0 K 0 K 03 T 5 mm grid K 03 T mm grid K 07 T mm grid K 6 T 5 mm grid K 6 OWAline grid K 0 K K s K 3

7 7 Technical information Material Classification of steel according to EN 05: KBB DC0+ZE5/5 Light reflection The standard colour for OWAtecta metal tiles is similar RAL They reflect approx. 76 % (L0) of the incident light. Degree of gloss 3 gloss units (60 angle) (data according to circumstances in laboratory) Paint Thickness of powder coating with our standard products is around 60 to 70 µm. Reaction to fire EN 350- ASTM E8 / ASTM E 6 Unperforated: A Class / class A Perforated: A-s,d0 Class / class A Product Warranties The information provided in this leaflet is based on the standards and data available at the time of publication. Any performance, warranties or guarantees provided, expressed or implied, are subject to the exclusive use of OWA components and the installation of those components in accordance with our recommendations. Failure to adhere to these conditions will result in the invalidation of any performance claims, warranties or guarantees and rejection of any liability. OWA reserves the right to make any technical improvements to the products, systems or services without prior notice. All goods and services are supplied in accordance with our current Terms and Conditions of Sale. Errors excepted!

8 8 S 7M cell ceiling OWAtecta unique and open design very light and easy demountable ideal to cover technical equipment installed in the soffit

9 9 System S 7M 8 S 7M cell ceiling 9 Main tee, cliq-5-mr/deco-38c Cross tee short, cliq-5-ct/deco-8c 3 Cross tee long, cliq-5-ct/deco-8c Wall angle, no. 50G 5 Upper grid, no. 7M-0 6 Lower grid, no. 7M-0 7 Edge profile, no. 7M-03 8 Hanger for threaded rod, no. 9/5M 9 Threaded rod Ø 6 mm (by client) distance 00 mm Other approved hangers can also be used! , 3 5 8, Wall perimeter: Technical data Material Steel Aluminium Module size 600 x 600 mm, x 600 x 600 mm, x Thickness 0.3 mm 0.5 mm Cell sizes Colour 75 x 75 mm (.95 x.95 ), 00 x 00 mm (3.9 x 3.9 ), 50 x 50 mm (5.9 x 5.9 ), 00 x 00 mm (7.87 x 7.87 ) OWA white, black matt Edges please see on page 6 Perforations on page and 5

10 0 S 9M baffle ceiling OWAtecta creates a unique and special room atmosphere easy ceiling access and flexible, customizable designs available in different colours

11 System S 9M S 9M baffle ceiling 5 Baffle Carrier profile, no. 9M-0, distance 00 mm 3 End cap, no. 9M-0 Splice for baffle, no. 9M-03 (not shown in the drawing) 5 Threaded rod Ø 8 mm (by client), distance 00 mm Technical data Material Steel Aluminium Size (w x h) 0 x 00 mm, 30 x 00 mm, 50 x 00 mm maximum length: 000 mm 0 x 00 mm, 30 x 00 mm, 50 x 00 mm maximum length: 000 mm Thickness 0.6 mm 0.8 mm Perforations L0, Rg56, Rd5, Rg070 L0, Rg56, Rd80, Rg090, Rg070 Colour OWA white, other colours on request Wooden colours CF 800 CF 806 CF 803 Edges please see on page 6 Perforations on page and 5

12 S clip-in OWAtecta plain, monolithic surface suitable for clean rooms swing down option for easy access

13 3 System S S clip-in Main tee, no. 5 or cliq, distance 00 mm Cross connector, no. 93C 3 Clip-in profile, no. 87M Clip-in profile splice, no. 88E 5 Wall angle (steel), no. 50G 6 Wall clip, no Shadow wall angle (steel), no. 50/5G 8 Wall clip, no F wall angle (aluminium), no. 50F 0 Clip for F wall angle, no. 50M Hanger for threaded rod, no. 9/5M Clip-tool no Threaded rod Ø 6 mm (by client), distance 00 mm Other approved hangers can also be used! The hangers have to be installed on the intersections of the main tees and the clip-in profiles, not more than 00 mm apart ,5 9 Wall perimeter: Technical data Material Steel Aluminium (not retractable) Module size 600 x 600 mm, x, 65 x 65 mm 600 x 600 mm, x Thickness 0.6 mm 0.8 mm Perforations L0, Rg56, Rd5, Rv336, Rg070 L0, Rg56, Rd80, Rg090, Rg070 Available edges K 0 K 0 Colour OWA white, RAL 9006 OWA white, RAL 9006 Edges please see on page 6 Perforations on page and 5

14 S 33 lay-in OWAtecta lay-in suspension system enabling full demountability available with great choice of perforations compatible with OWAcoustic mineral boards

15 5 System S 33 S 33 lay-in Main tee, no. 5/Deco-38A Cross tee short, no. 6/Deco-5A 3 Cross tee long, no. 7/Deco-5A Wall angle (steel), no. 50G 5 Wall clip, no Shadow wall angle (steel), no. 50/5G 7 Wall clip, no F wall angle (aluminium), no. 50F 9 Clip for F wall angle, no. 50M 0 Hanger for threaded rod, no. 9/5M Threaded rod Ø 6 mm (by client), distance 00 mm Other approved hangers can also be used! 0, 3 0, 3 Wall perimeter: Technical data Material Steel Aluminium Module size 600 x 600 mm, x, 65 x 65 mm 600 x 600 mm, x, 65 x 65 mm Thickness 0.5 mm 0.8 mm Perforations L0, Rg56, Rd5, Rv336, Rg070 L0, Rg56, Rd80, Rg090, Rg070 Available edges K 03, K 07 K 03, K 07 Colour OWA white, RAL 9006 OWA white, RAL 9006 Edges please see on page 6 Perforations on page and 5

16 6 S 36 Progress OWAtecta corridor system available with great choice of colours and perforations panels can be swung down along the short side or individually removed

17 7 System S 36 S 36 Progress Wall angle, no. 50 Z profile, no. 90E , visible side black 6, removable = 30 removable or retractable Attention: The walls of the corridor have to be parallel. It is not possible to cut the tiles on site. Technical data Material Steel Aluminium Module size Max. length 500 mm max. width 600 mm (max. size.0 m ) Max. length 500 mm max. width 600 mm (max. size.0 m ) Thickness Depends on size Depends on size Perforations On request On request Available edges K s K s Colour OWA white, other colours on request OWA white, other colours on request Edges please see on page 6 Perforations on page and 5

18 8 S 38M wedge ceiling OWAtecta enabling outstanding 3D ceiling design can be used in conjunction with standard panels easy demountability

19 9 System S 38M S 38M wedge ceiling 6 7 Main tee, cliq-5-mr/deco-38c Cross tee short, cliq-5-ct/deco-8c 3 Cross tee long, cliq-5-ct/deco-8c Wall angle, no. 50/5G 5 Wall clip, no Hanger for threaded rod, no. 9/5M 7 Threaded rod Ø 6 mm (by client), distance 00 mm 3 Other approved hangers can also be used! 7 6, 3 Wedge panel: 7 Flat panel: 6, 3 Wall perimeter: 5 Attention: Standard wall connection is only possible with the 8 mm flat panel. Wedge panels and higher flat panels can only be installed by using complete tiles in combination with a gypsum board frieze. Technical data Material Steel Aluminium Module size 600 x 600 mm, x 65 x 65 mm 600 x 600 mm, x 65 x 65 mm Height Wedge panel: 8 x 50 mm, 8 x 80 mm, 8 x 00 mm flat panel: 8 mm, 50 mm, 80 mm, 00 mm Wedge panel: 8 x 50 mm, 8 x 80 mm, 8 x 00 mm flat panel: 8 mm, 50 mm, 80 mm, 00 mm Perforations L0, Rg56 L0, Rg56, Rd80 Colour OWA white, RAL 9006 OWA white, RAL 9006 Edges please see on page 6 Perforations on page and 5

20 0 S 39M hook-on OWAtecta OWAtecta concealed suspension system ideal for large areas easy access to soffit through hook-on sys tem each panel demountable separately

21 System S 39M S 39M hook-on 9 3 Carrier profile, D39-0 Z profile, no. 90E0 3 Wall angle (steel), no. 50G Wall clip, no Shadow wall angle (steel), no. 50/5G 6 Wall clip, no F wall angle (aluminium), no. 50F 8 Clip for F wall angle, no. 50M 9 Threaded rod Ø 8 mm (by client) Panel length Carrier profile distance Hanger distance 50 mm 50 mm 50 mm 500 mm 00 mm 500 mm 000 mm 000 mm 000 mm 500 mm 850 mm 500 mm The hangers have to be installed on the intersections of the carrier profiles and the Z profiles, not more than 00 mm apart. The maximum distance of the hangers depends on the length of the tiles. has to be divisible by 50 mm 9 Gasket (optional) Gasket (optional) Wall perimeter: Technical data Material Steel Aluminium Module size Max. length 3000 mm max. width 00 mm (max. size.0 m ) Max. length 3000 mm max. width 00 mm (max. size.0 m ) Thickness Depends on size Depends on size Perforations On request On request Available edges K K Colour OWA white OWA white Edges please see on page 6 Perforations on page and 5

22 S 39 Mesh hook-on OWAtecta OWAtecta concealed suspension system ideal for large areas easy access to soffit through hook-on sys tem each panel demountable separately

23 3 System S 39 Mesh S 39 Mesh hook-on Carrier profile, D39-0 Z profile, no. 90E Wall angle (steel), no. 50G Wall clip, no Shadow wall angle (steel), no. 50/5G 6 Wall clip, no F wall angle (aluminium), no. 50F 8 Threaded rod Ø 8 mm (by client) The hangers have to be installed on the intersections of the carrier profiles and the Z profiles, not more than 00 mm apart. The maximum distance of the hangers depends on the length of the tiles. has to be divisible by 50 mm 9 Gasket (optional) Gasket (optional) Wall perimeter: Panel length Carrier profile distance Hanger distance 50 mm 50 mm 50 mm 500 mm 00 mm 500 mm 000 mm 000 mm 000 mm Technical data Material Aluminium Aluminium Module size Max. length 000 mm max. width 900 mm Max. length 000 mm max. width 900 mm Thickness.5 mm.5 mm Mesh size x 5 mm 0 x 5 mm Mesh shape Diamond Turtle back Open area 67 % 70 % Available edges K K Colour OWA white, RAL 9006 OWA white, RAL 9006 x 5 mm 0 x 5 mm Edges please see on page 6 Perforations on page and 5

24 S 5 lay-in OWAtecta lay-in suspension system enabling full demountability available with great choice of perforations compatible with OWAcoustic mineral boards

25 5 System S 5 S 5 lay-in Main tee, cliq-5-mr/deco-38c Cross tee short, cliq-5-ct/deco-8c 3 Cross tee long, cliq-5-ct/deco-8c Wall angle, no. 50G 5 Wall clip, no Shadow wall angle, no. 50/5G 7 Wall clip, no F wall angle (aluminium), no. 50F 9 Clip for F wall angle, no. 50M 0 Hanger for threaded rod, no. 9/5M Threaded rod Ø 6 mm (by client), distance 00 mm Other approved hangers can also be used! 0, 3 0, 3 Wall perimeter: Technical data Material Steel Aluminium Module size 600 x 600 mm, x, 65 x 65 mm 600 x 600 mm, x, 65 x 65 mm Thickness 0.5 mm 0.8 mm Perforations L0, Rg56, Rd5, Rv336, Rg070 L0, Rg56, Rd80, Rg090, Rg070 Available edges K 03, K 6 K 03, K 6 Colour OWA white, RAL 9006 OWA white, RAL 9006 Edges please see on page 6 Perforations on page and 5

26 6 S 5b OWAline OWAtecta lay-in suspension system enabling fully demountability panels are made from galvanized steel or aluminium to provide a smooth and durable finish each panel separately removable

27 7 System S 5b S 5b OWAline Main tee, no Cross tee short, no Cross tee long, no. 35 Wall angle, no. 50G 5 Wall clip, no Shadow wall angle, no. 50/5G 7 Wall clip, no F wall angle (aluminium), no. 50F 9 Clip for F wall angle, no. 50M 0 Hanger for threaded rod, no. 9/5M Threaded rod Ø 6 mm (by client), distance 00 mm Other approved hangers can also be used! 0, 3 0, 3 Wall perimeter: Technical data Material Steel Aluminium Module size 600 x 600 mm, x, 65 x 65 mm 600 x 600 mm, x, 65 x 65 mm Thickness 0.5 mm 0.8 mm Perforations L0, Rg56, Rd5, Rv336, Rg070 L0, Rg56, Rd80, Rg090, Rg070 Available edges K 6 K 6 Colour OWA white OWA white Edges please see on page 6 Perforations on page and 5

28 8 S 5b Trapeze OWAtecta lay in suspension system with trapezoid metal panels special tiles with trapezoid shape suitable with OWAlight and Trapeze LED A

29 9 System S 5b Trapeze S 5b Trapeze 0 9 Main tee no Cross tee long no Wall angle no. 50G Wall clip no Shadow wall angle no. 50/5G 6 Wall clip no F wall angle (aluminium) no. 50F 8 Clip for F wall angle, no. 50M 9 Hanger for threaded rod, no. 9/5M 0 Threaded rod Ø 6 mm (by client), distance 00 mm 3 Other approved hangers can also be used! Wall perimeter: Technical data Material Module size Dimensions Thickness Perforations Steel 00 x 600 mm 00 x 00/00 mm 0.6 mm L0 un-perforated, Rg070 Available edges K 6 Colour OWA white Edges please see on page 6 Perforations on page and 5

30 30 S 9M mesh ceiling OWAtecta creates a distinct and unique look suitable for large public areas

31 3 System S 9M S 9M mesh ceiling 6 Main tee, no. 5/cliq--MR/Deco-38A Cross tee short, no. 6/cliq--CT/Deco-5A 3 Cross tee long, no. 7/cliq--CT/Deco-5A Wall angle (steel), no. 50G 5 Hanger for threaded rod, no. 9/5M 6 Threaded rod Ø 6 mm (by client), distance 00 mm Other approved hangers can also be used! 5 Wall perimeter: , 3 5, 3 Technical data Material Steel/aluminium Aluminium Aluminium Module size 600 x 600 mm, x, 65 x 65 mm, 600 x 00 mm, x, 65 x 50 mm 600 x 600 mm, x, 65 x 65 mm, 600 x 00 mm, x, 65 x 50 mm 600 x 600 mm, x, 65 x 65 mm, 600 x 00 mm, x, 65 x 50 mm Thickness.5 mm.5 mm.5 mm Mesh size 8 x 5 mm x 5 mm 0 x 5 mm Mesh shape Diamond Diamond Turtle back Open area 5 % 67 % 70 % Available edges Cut end Cut end Cut end Colour OWA white, RAL 9006 OWA white, RAL 9006 OWA white, RAL x 5 mm x 5 mm 0 x 5 mm Edges please see on page 6 Perforations on page and 5

32 No responsibility is taken for the correctness of this information. Odenwald Faserplattenwerk GmbH Dr.-F.-A.-Freundt-Straße Amorbach Germany tel info@owa.de Brochure 9305 e 07800