fireshieldcoatings.com

Transcription

1 fireshieldcoatings.com 1

2 FIRE-PROTECTED Surface Finishes on any timber up to Group 1-S AND FIRE-RATED Structural Steel Members FOR 30, 60 & 90 mins A couple of minutes. That s the difference between a fire that causes serious damage and one that causes a catastrophic loss of life. These precious minutes are what drive us. By preventing fire from starting or spreading, our easy-to-install fire protection systems help save lives, buildings and items of value. With a complete range of passive fire products for the protection of timber, steel and concrete structures, as well as fire-stopping and gap-sealing, we are proud to bring our customers in Australia and New Zealand products from Scandinavia s top manufacturer, who has been a market-leader in this field for more than 25 years. Manufactured in Sweden under ISO14001, ISO9001 and a range of European green building certification schemes, our products have been assessed and certified for Declare status under the Living Building Challenge scheme. We are part of the Living Future Declare system, an ingredient status program for building products. Our products are one of very few approved intumescent coatings. A Declare label answers three questions: Where does a product come from? What is it made of? Where does it go at the end of its life? This transparent platform and product database is changing the materials marketplace. Being Red List Free means our products are free of the most harmful environmental pollutants and toxins that are so prevalent in the building industry. For architects, designers and contractors, it makes the tiring materials specification process so much easier, providing a free resource to help make greener product selections for every project.

3 INTERNAL STRUCTURAL STEEL Fireshield ArchitecturalWhite 4FR can be used on internal steel structural members, such as columns and beams, to achieve a 30, 60 or 90-minute fire rating. An approved topcoat can be applied over this product to achieve a coloured finish. PAGE 6 PAGE 8 INTERNAL PLASTERBOARD Fireshield ArchitecturalWhite 4FR is approved for non-fire-rated walls that are lined with plasterboard to achieve a 30/30/30 FRR. PAGE 4 PAGE 4 NATURAL TIMBER WALL AND CEILING LININGS Fireshield TimberClear 1FR maintains the natural look of timber with a clear finish, achieving up to a maximum Group 1-S rating on internal timber linings to comply with NZBC. PAGE 6 APPLICATIONS EXTERNAL TIMBER CLADDING When applied with Resene primer and topcoats, Fireshield TimberWhite 2FR is New Zealand s only approved paint system for exterior timber to mitigate fire spread. INTERNAL STRUCTURAL TIMBER Our products can be used to reduce char rates to internal structural timber. Please contact us for a specific recommendation and compliance paperwork. PIGMENTED TIMBER WALL AND CEILING LININGS Fireshield TimberWhite 2FR will achieve a pigmented finish up to a maximum Group 1-S rating on internal timber linings to comply with NZBC. fireshieldcoatings.com 3

4 TIMBER CLEAR 1FR TIMBER WHITE 2FR ARCHITECTURAL WHITE 4FR Architects, designers and specifiers can now use natural timber wall and ceiling linings in commercial fit-outs and achieve a Group 1-S rating to comply with the NZBC requirements using Fireshield TimberClear 1FR. Fireshield TimberClear 1FR is a water-borne, environmentally friendly, clear intumescent coating that gives you the highest surface group rating on any timber, Group 1-S. A simple two-coat system for interior use, one coat of Fireshield TimberClear 1FR sealed with one coat of Fireshield TOPcoat 1FR, which is offered in flat (gloss 7) or semi-flat (gloss 20). Fireshield TimberClear 1FR gives you a smooth and clear finish. 4

5 BENEFITS n Achieve Group 1-S surface rating on any timber substrate n Clear finish n Water-based intumescent coat n Halogen-free system n Cost-effective two-coat system AIRLESS SPRAY ROLLER/BRUSH HALOGEN FREE Application Fireshield TimberClear 1FR is an intumescent clear coating that foams into a thick layer when exposed to high temperatures derived from flames or intensive heat radiation from fire. The porous layer of foam effectively extinguishes the flow of heat to the treated surface. TimberClear 1FR is always used in conjunction with Fireshield TOPcoat 1FR. If a colour is required on the timber substrate, you can stain it with an approved water-based product, like Resene Colorwood, before the application of Fireshield TimberClear 1FR. For best results, Fireshield TimberClear 1FR should be sprayed onto the timber substrate, however it can be brushed or rolled on to small or linea substrates, provided product viscosity and application conditions can be met. OTHER USES Structural TIMBER coating exposed timber members in TimberClear 1FR helps reduce timber char rates. Contact us for more details. SPECIFICATION Fireshield TimberClear 1FR is available exclusively through Resene New Zealand. Please contact your local Resene Architectural or Trade Rep, or contact us on 0800 FIRESHIELD ( ) and we will put you in touch with the right person. Use Masterspec, CMS or Eboss to specify this product for your next project. AVAILABLE SIZES: 12.5kg 25kg

6 TIMBER CLEAR 1FR TIMBER WHITE 2FR ARCHITECTURAL WHITE 4FR Architects, designers and specifiers can now use natural timber wall and ceiling linings in commercial fit-outs and achieve a Group 1-S surface finish rating to comply with the New Zealand Building Code requirements using FIRESHIELD TimberWhite 2FR. Fireshield TimberWhite 2FR is a water-borne, environmentally friendly, pigmented intumescent coating. Only one coat is required for compliance, although it can be top-coated with an approved topcoat to achieve any desired colour finish. Fast one-coat application also means lower labour costs. 6

7 BENEFITS n Achieve a pigmented Group 1-S surface rating on any timber substrate n Water-based intumescent coat n Halogen-free system n Cost-effective, fast, one-coat system AIRLESS SPRAY ROLLER/BRUSH HALOGEN FREE Application Fireshield TimberWhite 2FR is a pigmented intumescent paint that foams into a thick layer when exposed to high temperatures derived from flames or intensive heat radiation from fire. The porous layer of foam effectively extinguishes the flow of heat to the coated surface. Fireshield 2FR can be top-coated with Resene Spacecote. For best results, Fireshield TimberWhite 2FR should be spray applied to the timber substrate, however it can be brushed or rolled on small or linea substrates, provided product viscosity and application conditions can be met. OTHER USES Structural TIMBER coating exposed timber members in TimberWhite 2FR helps reduce timber char rates. Contact us for more details. EXTERNAL TIMBER CLADDING use in conjunction with Resene paints SPECIFICATION Fireshield TimberWhite 2FR is available exclusively through Resene New Zealand. Please contact your local Resene Architectural or Trade Rep, or contact us on 0800 FIRESHIELD ( ) and we will put you in touch with the right person. Use Masterspec, CMS or Eboss to specify this product for your next project. AVAILABLE SIZES: 12.5kg 25kg

8 TIMBER CLEAR 1FR TIMBER WHITE 2FR ARCHITECTURAL WHITE 4FR 8 FIRESHIELD ArchitecturalWhite 4FR is water-borne, fire-rated intumescent coating, primarily for structural steel, to achieve a 30, 60 and 90 min fire rating. Being water-based, it is easy to apply and gives an excellent architectural, paint-like finish. It is environmentally friendly, with Declare Status (Red List free), and is very competitively priced. FIRESHIELD ArchitecturalWhite 4FR can be used with over 30 approved steel primers and can be top-coated to achieve any colour finish from the approved top coats list, providing a tested and approved protection system. Thin film coat application due to its advanced technology also means lower labour costs through less coats needing to be applied.

9 BENEFITS n 30, 60 or 90-minute fire rating to structural steel members n Lower film thicknesses means fewer coats, and lower labour costs n Can be top-coated with any colour using Fireshield-approved top coats n No harmful halogens and low VOC. n Environmentally friendly, with Declare status and Red List free n High-quality, water-borne finish n Manufactured in Sweden, using advanced European technology n Greater flexibility: combine with over 30 approved primers and top coats for a compliant system. AIRLESS SPRAY ROLLER/BRUSH HALOGEN FREE Application Fireshield ArchitecturalWhite 4FR is used to protect new or existing structural steel members from fire by insulating the steel surface from fire. It achieves a fire resistance rating of 30 to 90 minutes. Traditional solvent-based intumescent coatings can irritate construction workers and occupants, representing a health hazard. ArchitecturalWhite 4FR is water-based, so such issues do not arise. Please contact us so we can calculate the amount of coating each steel member requires for your project to achieve compliance. For best results, FIRESHIELD ArchitecturalWhite 4FR should be applied with a commercial paint sprayer, however it can be brushed or rolled on. Our Applicator Instructions detail the finishes achievable with the various application methods. OTHER USES Structural TIMBER reduces char rates PLASTERBOARD WALLS achieve 30/30/30min fire rating. Please contact us for further information. SPECIFICATION To specify Fireshield ArchitecturalWhite 4FR simply please call us directly on 0800 FIRESHIELD ( ) or us at info@fireshieldcoatings.com and we will process your order. Use Masterspec, CMS or Eboss to specify this product for your next project. AVAILABLE SIZES: 12.5kg 25kg

10 10

11 PRODUCT SELECTOR Water-based Finish Clear Pigmented Pigmented Halogen-free/low VOC Application to Timber wall and ceiling linings Timber wall and ceiling linings Structural steel members and internal plasterboard linings Top coat required? 4 Fireshield TimberClear 1FR Top Coat is required to protect the base coat 7 (Can be top-coated with colour required or if in a humid area such as a bathroom) 7 (Can be top-coated with colour required or if in a humid area such as a bathroom) Compliance information FIRESHIELD TimberClear 1FR will achieve Group 1-S rating complying with NZBC Specification C Table 3 in respect of wall and ceiling linings. FIRESHIELD TimberWhite 2FR will achieve Group 1-S rating complying with NZBC Specification C Table 3 in respect of wall and ceiling linings. Architectural White 4FR is fully tested to EN :2013, certified and assessed in accordance with AS and AS

12 How to order FIRESHIELD products can only be sold to Registered Approved Applicators. Please contact your local Resene Architectural or Trade Rep, or contact us and we will put you in touch with the right person. CALL: 0800 FIRESHIELD ( ) NZ 7170 DESIGN BY KOPARACREATIVE.CO.NZ 12 fireshieldcoatings.com