END PANELS, TOPS & BOTTOMS

Transcription

1

2

3 SPECIFICATIONS END PANELS, TOPS & BOTTOMS are 3/4" marine grade polymer in a matte finish and are environmentally stabilized to withstand the harshest marine conditions. This marine grade polymer is made to maintain color and finish for the lifetime of the cabeints. Tops and bottoms are fastened to the end panels by plastic dowels. BACKS are 1/4" marine grade polymer in a matte finish and are environmentally stabilized to withstand the harshest marine conditions. Backs are dadoed into tops, bottoms, and end panels. CABINET LEVELERS are adjustable leg levelers, allowing easy leveling of the cabinet on uneven surfaces. The screw mounted clip for attaching toe kick strip to the Cabinet Leveler will be sent loose for field installaion. TOE KICK STRIPS are 3/4" marine grade polymer in a matte finish and are environmentally stabilized to withstand the harshest marine conditions. SHELVES are 3/4" marine grade polymer in a matte finish and are environmentally stabilized to withstand the harshest marine conditions. Shelves are adjustable with steel pin shelf supports on 32mm centers. DRAWERS are constructed of 3/4" marine grade polymer sides, backs, and fronts with dovetail corners; and are slotted to receive 1/4" marine grade polymer bottoms. Drawer slides are full extension side mount with a 92 pound static load rating, a positive stop (to keep the drawer from being accidentally pulled out of the cabinet), and a lever release for easy drawer removal. The drawer slides include stainless steel ball bearings and ball bearing holders for a weatherproof, smooth action. Drawer fronts are attached using a threaded brass insert, drilled to exact specifications, in the drawer front and attached to the drawer box with a machine screw. This innovative method has much more holding power than standard methods of attaching drawer fronts and also allows the drawer front to be easily adjusted (before hardware installation). HARDWARE hinges are of rust proof stainless steel construction, fully concealed; spring loaded and self-closing with a maximum opening of 100 degrees. The hinges are mounted on a base plate attached to the cabinet side and have fully integrated independent screw adjustment for vertical, horizontal, and depth adjustments. Three hinges per door are used. DOORS are constructed of the following materials: Wood panel doors are 3/4" solid wood frames with 1/2" solid wood flat insert or 3/4" solid wood raised insert. Polymer doors are 3/4" solid polymer. Maximum suggested door size is 24" x 60", doors over 24" x 60" will not be warranted against warpage. WOODS are available in Teak, Cypress, Bamboo, Thermal Oak, and Thermal Hickory. These are weather resistant outdoor woods and do require an initial, and periodic, application of Teak Oil, to maintain their natural color. Doors and drawer heads are not oiled when shipped from the factory and will need to have the initial application of teak oil prior to installation. Wood doors and drawer heads should be removed from the Polymer cabinet BEFORE oiling. CRESTWOOD reserves the right to change the design, construction, or materials listed herein. These changes will always be made to improve the product, or they will be made if certain specified materials become unavailable for reasons beyond our control.

4 MATERIALS CYPRESS contains a natural oil, cypressene, contributing to the overall stability, including splitting and warping resistant qualities. Cypress is valuable in the following applications: boat planking, river pilings, docks, building construction, doors, shingles, flooring, garden boxes, exterior trim and fence posts. TEAK is esteemed across the country for its usage in boat building, fine furniture making, flooring, and marine applications. The present natural oils in Teak wood make for an extremely strong and durable material, withstanding high humidity; therefore resisting moisture and the drying effects of weather. BAMBOO is not only naturally beautiful, it is durable, and a rapidly renewable resource. Characteristics are straight grained with nodules randomly interspersed throughout. Hard, dense, heavy, strong, fine texture. Bamboo used is 3-ply material. THERMAL OAK is a thermally-enhanced hardwood that resembles a high-priced exotic hardwood. Moisture content on thermally treated wood is from 4-6% resulting in a moisture resistant material for outdoor use. THERMAL HICKORY is a thermally-enhanced hardwood that resembles a high-priced exotic hardwood. Moisture content on thermally treated wood is from 4-6% resulting in a moisture resistant material for outdoor use. POLYMER, from King StarBoard, is the original marine-grade polymer and the industry standard. It is the product of a proprietary process called K-Stran, the most advanced manufacturing process available for producing consistently flat continuous sheets. King StarBoard is environmentally stabilized to withstand the harshest marine conditions. It will not rot, swell, splinter, discolor or delaminate when exposed to humidity or water. COLORS Teak Bamboo Cypress Thermal Hickory Thermal Oak Dolphin Gray Sanshade White Evergreen Everglade Seafoam Black Mocha Brown

5 DOOR STYLES DOOR AND DRAWER FRONT OPTIONAL EDGE PROFILES: E2 E4 E5 E6 E13 E16 E24 E25 E29 E33 BELMONT 1 Available in Polymer BELMONT Availble in Cypress, Teak, Bamboo, Thermal Oak and Thermal Hickory HEARTLAND Availble in Cypress, Teak, Thermal Oak and Thermal Hickory BERKLEY Availble in Cypress, Teak, Thermal Oak and Thermal Hickory PRESCOTT Availble in Cypress, Teak, Thermal Oak and Thermal Hickory

6 CABINETS WALL Width: 12 thru 36 (24 thru 36 double door) Depth: 12 Height: 21 WALL Width: 12 thru 36 (24 thru 36 double door) Depth: 12 Height: 30 WALL Width: 12 thru 36 (24 thru 36 double door) Depth: 12 Height: 36 WALL Width: 12 thru 36 (24 thru 36 double door) Depth: 12 Height: 42 WALL BLIND CORNER Width: 24 thru 36 Depth: 12 Height: 30 15" Specify Hinge Direction Specify Blind Corner Left or Right (left shown) WALL MICROWAVE OPEN SHELF Width: 24 thru 33 Depth: 18 Height: 33 Open Area will be Polymer Material

7 CABINETS BASE (Door & Drawer) Width: 12 thru 36 (27 thru 36 double door) BASE FULL HEIGHT DOOR Width: 12 thru 36 (27 thru 36 double door) BASE DRAWER THREE (Drawers 6, 12, 12) Width: 12 thru 36 Depth: 12, 15, 18, 21, & 24 BASE DRAWER FOUR (Drawers 6, 6, 6, 12) Width: 12 thru 36 Depth: 12, 15, 18, 21, & 24 BASE BLIND CORNER (Door & Drawer) BASE BLIND CORNER(Full Height Door) Width: 39 Specify Blind Corner Left or Right (left shown) BASE SINK Width: 18 thru 48 (27 thru 48 double door) 27" 27" BASE WASTE CONTAINER (Door & Drawer) BASE WASTE CONTAINER (Full Height Door) Width: 15 Depth: 24, 27 Specify Hinge Direction

8 CABINETS BASE GRILL (Full Height Door) Width: 33 thru 63 (33 thru 48 double door, over 48 four doors) Depth: 27 Specify Grill Cut-Out BASE SIDE BURNER (Full Height Door) Width: 15 thru 33 (15 thru 24 single door, over 24 double door) Depth: 27 Specify Side Burner Cut-Out BASE PROPANE TANK (Door & Drawer) BASE PROPANE TANK (Full Height Door) Width: 18 Depth: 24 & 27 Specify Hinge Direction BASE APPLIANCE, ONE DRAWER Width: 24 thru 36 Depth: 24 Specify Appliance Cut-Out BASE APPLIANCE, TWO DRAWER Width: 24 thru 36 Depth: 24 Specify Appliance Cut-Out TALL UTILITY Width: 12 thru 36 (12 thru 24 single door, over 24 double door) Height: 84 TALL LINEN Width: 12 thru 36 (12 thru 24 single door, over 24 double door) Height: 84

9 CABINETS PULL TRAY Width: Cabinets 15 thru 36 Depth: 12, 15, 18, & 21 Height: 4 Polymer, Dovetail BASE FILLER Width: 3 & 6 Same Material as Doors BASE CORNER FILLER Width: 3 & 6 Specify 90 or 45 and Inside Angle or Outside Angle Same Material as Doors, Butt Joint Corner WALL FILLER Width: 3 & 6 Height: 21, 30, 36, & 42 Same Material as Doors 90 Corner Filler 90 Inside Angle (IA) 45 Corner Filler 45 Outside Angle (OA) WALL CORNER FILLER Width: 3 & 6 Height: 21, 30, 36, & 42 Specify 90 or 45 and Inside Angle or Outside Angle Same Material as Doors, Butt Joint Corner BASE END PANEL Width: 3 & 6 Height: 30 Specify Left or Right Return (right return shown) Polymer Return with Front Filler Same Material as Doors, Butt Joint Corner TOE KICK STRIP 4 1/2 x 96 Polymer 90 Corner Filler 90 Inside Angle (IA) 45 Corner Filler 45 Outside Angle (OA)

10 appliances GOURMET SERIES GRILL Width: 30", 42", 56" Specifications: Liquid Propane or Natural Gas All Sizes Available with Rotisserie & Smoker Burner 42" & 56" Available with Infrared Sear Burner 56" Available with Sealed Side Burners LX2 SERIES GRILLS Width: 30" & 42" Specifications: Liquid Propane or Natural Gas All Units Standard with Smoker Burner, Integrated Hologen Lighting, Integrated Rotisserie, Warming Racks and Flip-Down Control Panels Infrared Sear Burner Available SIDE BURNER SEAR ZONE UNIT Specifications: Natural Gas or Liquid Propane VERSAPOWER COOKER Available Accessories: 22" Commercial Wok Teppanyaki Griddle 10" Pot Filler Tower with Faucet Pot Filler Faucet with Double Joint Spout REFRIGERATORS, WINE STORAGE & ICE MAKERS 15" Ice Cube Machine (Gravity Drain or Drain Pump) 15" Wine Storage with Glass Door & Stainless Frame 42" Built-in Refrigerator with 1-Door and 2-Marinating Drawers 24" Built-in Countertop Refrigerator 28" Single Door Refrigerator (Convert to Kegerator with Optional Keg Kit) FOOD WARMER WARMING DRAWER Built-in Food Warmer (uses sterno) 30"Warming Drawer BARTENDING CENTER Width: 13", 24", & 30" Available Accessories: Prep/Hand Wash Sink with Towel Dispenser Serving Shelf Condiment Tray Plating and Garnish Center 14" or 19" Speed Rail Additional appliances available to meet your needs.

11 WARRANTY Limited Lifetime Warranty Crestwood, Inc. warrants to the original purchaser that Crestwood cabinets will be free from defects in workmanship and materials for as long as you own the cabinetry. This warranty does not cover defects or damage that are not directly or primarily the result of Crestwood s design or construction. The warrantee does not cover damage caused by others or beyond the control of Crestwood including but not limited to freight damage, accident, acts of God, misuse, negligence, alterations, abuse, improper storage, installation or removal. Additionally this warranty does not cover products that are subjected to extreme temperatures or extreme moisture levels. When a claim for warpage/ joint separation is submitted, Crestwood may, at its discretion, defer action for 12 months to allow the product to acclimate to the environment. This warrantee does not cover products that are not used per Crestwood s intent and design and does not apply to unfinished product. The protective top-coat applied to Crestwood products is designed to meet and/or exceed the requirements of the Kitchen Cabinet Manufacturer s Association. As with any quality finish, it will wear with age and use, depending upon the owner s maintenance of the product. Exposure to abrasive chemicals, solvents, excessive ultraviolet light, and moisture can cause the finish to fail. Painted finishes may show more noticeable wear and tear from normal residential use. Paints will exhibit hairline expansion/contraction lines at joints (finish fractures) and any nicks, dents and rub-throughs from normal use will be more noticeable. The color of the wood and finish may change during the lifetime of the product especially with certain wood species and with exposure to direct or indirect sunlight and other factors. The color change (mellowing) occurs in both the finish and the wood and is part of the natural ageing process and is not to be considered defect or damage. Accessories, components, parts and finish coatings that are not manufactured by Crestwood are not covered under the Crestwood warranty but may be covered under their individual manufacturer s warrantee. After Crestwood has had an opportunity to inspect the product, Crestwood, at its sole discretion, will determine whether a defect exists. In the event Crestwood determines a defect exists, the sole remedy to the original purchaser is either repair or replacement of the product, which shall be determined by Crestwood. Replacement products provided under this Warranty may not exactly match original products due to the passage of time, natural aging process, and evolution of Crestwood s product offering. Crestwood s liability under this warranty is expressly limited to replacement or repair of the product, and in no event shall Crestwood be liable in any way for consequential or incidental damages of any kind. This Warranty does not cover delivery costs or labor charges to remove or reinstall products or any related components (including countertops, plumbing and appliances). Crestwood shall not be liable for any damage or errors resulting from or related to the installation or use of its products. This warranty is offered only to the original purchaser of the cabinets at the original site of installation and is not transferable. This warranty applies only to cabinets or related products purchased through an authorized Crestwood dealer. Crestwood, Inc. shall not be responsible for any products returned, repaired or replaced without prior written consent from Crestwood, Inc. Crestwood reserves the right to make changes in materials and specifications without prior notification but are under no obligation to incorporate such changes in products previously manufactured. This warranty is in lieu of all other warranties, express or implied, including warranties of merchantability and of fitness for a particular purpose. Crestwood does not authorize any other person or company to assume on our behalf, any other liability in connection with the sale of our products. No representative of Crestwood has the authority to alter the terms of this warranty without the advanced written approval from the President of Crestwood. The Buyer/Homeowner Purchaser hereby waives all other remedies, warranties, guarantees or liabilities (expressed or implied) arising by law or otherwise, including without limitation, actions for consequential, incidental or punitive damages of any kind. This warranty gives the consumer specific legal rights, and you may have other rights which may vary from state to state. To file a warranty claim request, the original purchaser should contact the authorized Crestwood dealer where the product was purchased. Proof of original purchase is required. The authorized dealer will obtain the necessary information to complete a warranty request and forward the request in writing to Crestwood, Inc.

12