Mars. Pendant & Surface

Transcription

1 Mars Pendant & Surface IK C W 50W W 3300lm 4125lm 5363lm 1123 x x x 94 * Accessories to be ordered separately. Weather proof metallic body linear ED fixture. Extruded aluminium smooth profile rigid body with matching injection moulded endcaps with built in heat sink to create perfect thermal system for heat dissipation. Smooth anti glare reeded PMMA diffuser throws maximum light downwards and some upward reflector light to avoid tunnel effect. High temperature silicone gasket pressed with diffuser lining throughout its entire length to give ingress of protection. factory installed single compression male/female cable gland for ease of installation. Stainless steel clip on ceiling mounted clips directly latches on its body no drilling or punching holes in the body of the fitting keeping the rating. Stainless steel suspension wire kit with S.S Cable 1.8m supplied with each fitting. Supplied with suspension or direct soffit mounting accessories for ease of installation. Continuous modules of EDs across the whole diffuser, U stabilised. Provides wide even light distribution. isually enhanced illumination in comparison with T8/T5 Fluorescent lamps, allowing the designers to use less number of fixtures in wider spaces. colour temperature as Available colours 3000K, 4000K, and Car Parks, Service Rooms and Exterior Applications. Extruded aluminium body, weather proof ED fixture with integrated silicone seal and stainless steel fasteners, opal polycarbonate U stabilised diffuser. Surface mounted ED fixture 40W,50W and W, body made of extruded aluminium with integrated screws, opal polycarbonate U stabilised diffuser. suitable to operate in -25 C~+45 C DSI & DAI dimming. 1~10 dimming. Integrated reputed high quality driver

2 Jupiter Pendant & Surface IK C W 50W W 3300lm 4125lm 5363lm 1116 x x x 86 * Accessories to be ordered separately. Unique design weather proof linear ED fixture. ery slim profile and no visible screws. Extruded aluminium smooth profile rigid body with matching injection moulded endcaps with built in heat sink to create perfect thermal system for heat dissipation. Smooth anti glare reeded PMMA diffuser throws maximum light downwards and some upward reflector light to avoid tunnel effect. High temperature silicone gasket pressed with diffuser lining throughout its entire length to give ingress of protection. factory installed single compression male/female cable gland for ease of installation. Integrated reputed high quality driver. Stainless steel clip on ceiling mounted clips directly latches on its body no drilling or punching holes in the body of the fitting keeping the rating. Stainless steel suspension wire kit with S.S Cable 1.8m supplied with each fitting. Supplied with suspension or direct soffit mounting accessories for ease of installation. Continuous modules of EDs across the whole diffuser, U stabilised. Provides wide even light distribution. isually enhanced illumination in comparison with T8/T5 Fluorescent lamps, allowing the designers to use less number of fixtures in wider spaces. colour temperature as Available colours 3000K, 4000K, and Car Parks, Service Rooms and Exterior Applications. Extruded aluminium body, weather proof ED fixture with integrated silicone seal and stainless steel fasteners, opal polycarbonate U stabilised diffuser. Surface mounted ED fixture 40W,50W and W, body made of extruded aluminium with integrated screws, opal polycarbonate U stabilised diffuser. suitable to operate in -25 C~+45 C DSI & DAI dimming. 1~10 dimming

3 Apolo Pendant & Surface IK W 45W 70W 4000K 4000K 4000K 2592lm 3lm 5040lm 11 x x x 145 * Accessories to be ordered separately. Revolutionary unique design weather proof linear ED fixture. Extruded aluminium body and die cast aluminium end caps with built in heat sink to create perfect thermal system for heat dissipation. Supplied with suspension or direct soffit mounting accessories for ease of installation. rated. Continuous band of EDs across the whole diffuser, U stabilised. Provides wide even light distribution. comparison with T8/T5 Fluorescent lamps, allowing the designers to use less number of fixtures in wider spaces. 4000K colour temperature as Available colours 3000K, 4000K, and Car Parks, Service Rooms, Meeting Rooms, Interior Halls and Exterior Applications. Extruded aluminium body, weather proof ED fixture with integrated silicone seal and stainless steel fasteners, opal polycarbonate U stabilised diffuser. Surface mounted ED fixture 35W,45W and 70W, body made of extruded aluminium and die cast aluminium end caps with integrated screws, opal polycarbonate U stabilised diffuser. suitable to operate in -25 C~+ DSI & DAI dimming. 1~10 dimming C120(Max): C0/C1: C90/C270:

4 Neptune Surface Traditional weatherproof luminaire using ED technology. Modular gear tray with ED driver allows for quick and easy installation. Body injection moulded GRP in grey with integrated silicone seal and stainless steel diffuser retaining clips. Supplied with weatherproof cable gland. Anti corrosive and waterproof antiimpact diffuser. Matt opal diffuser material provides wide even light distribution. Car Parks, Substations, Transformer Rooms, All Industrial Applications including Production Areas, oading Bays and Workshop Areas. Body injection moulded GRP in grey with integrated silicone seal and stainless steel diffuser retaining clips. Supplied with weatherproof cable gland. Traditional ED 25W, 40W and 50W fixture, body injection moulded GRP in grey with integrated silicone seal and stainless steel diffuser retaining clips. Supplied with weatherproof cable gland. suitable to operate in -25 C~ W 2550lm 1270 x W 4820lm 1270 x W 5100lm 1270 x 160 DAI & DSI dimming. 1~10 dimming. comparison with T8 & T5 lamps. colour temperature as Available colours 4000K, and /

5 Harbour Surface Traditional weatherproof luminaire using ED technology. Modular gear tray with ED driver allows for quick and easy installation. diffuser retaining clips. Supplied with weatherproof cable glands and Anti corrosive and waterproof antiimpact diffuser. Car Parks, Substations, Transformer Rooms, All Industrial Applications including Production Areas, oading Bays and Workshop Areas. diffuser retaining clips. Supplied with weatherproof cable glands and Traditional ED 23W, 46W and 55W fixture, body moulded in grey diffuser retaining clips. Supplied with weatherproof cable glands and suitable to operate in -25 C~ W 2500lm 660 x W 55W 4300lm 5300lm 1260 x x 130 DAI & DSI dimming. 1~10 dimming. Matt opal diffuser material provides wide even light distribution. comparison with T8 & T5 lamps. colour temperature as Available colours 4000K, and cd/klm C0-C1 C90-C270 n=90% 90

6 Dock Surface Tool less weatherproof luminaire using ED technology. Integrated ED driver and modules allows quick and easy installation. silicone seal and diffuser. Supplied with weatherproof cable glands and Anti corrosive and waterproof antiimpact diffuser. Car Parks, Substations, Transformer Rooms, All Industrial Applications including Production Areas, oading Bays and Workshop Areas. silicone seal and diffuser. Supplied with weatherproof cable glands and Traditional ED 25W, 48W and 60W fixture, body moulded in grey silicone seal and diffuser. Supplied with weatherproof cable glands and suitable to operate in -25 C~ W lm 600 x W lm 1200 x W lm 1530 x 90 Matt opal diffuser material provides wide even light distribution. comparison with T8 & T5 lamps. colour temperature as Available colours 4000K, and

7 Atlas Surface 44 Traditional 44 surface luminaire using ED technology. Modular gear tray with ED driver allows for quick and easy installation. Housing made of sheet steel metal and epoxy powder coat finish. End caps are in polycarbonate material. Polycarbonate matt diffuser provides wide even light distribution. comparison with T8 & T5. colour temperature as Store Rooms, Schools, Service Rooms, Interior Applications, Stairs. Housing made of sheet steel metal and epoxy powder coat finish. End caps are in ploycarbonate material. Polycarbonate matt diffuser provides wide even light distribution. Surface luminaire 44 ED 54W and 66W fixture, housing made of sheet steel metal and epoxy powder coat finish. End caps are in polycarbonate. Polycarbonate matt diffuser provides wide even light distribution. suitable to operate in -25 C~ W lm 1161 x W lm 1500 x 200 DAI & DSI dimming. 1~10 dimming. Available colours 4000K, and cd/klm C0-C1 C90-C270 n=90% 70