The perfect connection of waterproofing and concrete protection. Cementitious slurries from Ceresit

Transcription

1 The perfect connection of waterproofing and concrete protection Cementitious slurries from Ceresit

2 One range many possibilities: CR 65, CR 100 and CR 166. Our range of cementious slurries offers you Due to their excellent resistance against water and long term weathering resistance, a good load carrying capacity the right solution no matter what kind of and a much higher water vapour permeability to most of the other systems you can not only waterproof the typical water intrusion you would like to protect application areas (i.e. basement walls, water tanks, swimming pools and wet areas) with CR65, CR100 and CR166 but your building from. also use it as protective surface coating-system for structural concrete or as a protective layer for building constructions.

3 Wether waterproofing or concrete protection: with our cementitious slurries your re on the safe side. CR 65 rigid 1K cementitious waterproofing slurry For waterproofing buildings, structural components and containers Characteristics waterproof vapour permeable increases surface protection frost resistant economical application can be applied by brush, trowel or sprayed resistant to negative water pressure protects standard concrete structures for drinking water tanks CR 100 Semi-flex 2K protective coating and waterproofing slurry For waterpoofing and concrete protection of buildings, structural components and containers Characteristics waterproof vapour permeable semi-flexible crack bridging ability resistant to negative water pressure for drinking water tanks can be applied by brush, trowel or sprayed protects standard concrete structures to smoothen, uniform and protect surface after concrete repair frost resistant Arch. Pierangelo Brandolisio / Graphistudio S.p.a. CR 166 flexible 2K waterproofing slurry For crack-bridging waterproofing of buildings and structural components Characteristics waterproof flexible increases surface protection frost resistant covers surface cracks compatible with sealing tape can be applied by brush, trowel or sprayed protects reinforced & standard concrete structures

4 Waterproofing everything is possible with the cementitious slurries from Ceresit With our cementitious slurries from Ceresit you are able to cover all waterproofing application fields such as basement walls, water tanks, swimming pools, walls and floors in wet rooms (i.e. toilets, bathrooms), balconies and terraces (as a waterproofing layer to be tiled over). Foundation/Basement Walls Wet areas around pools Balconies, Terraces, Facades Swimming pools Drinking water tanks Application areas cementious slurries Adequate surface protection and correct product application are the prerequisites that ensure long-lasting and well-functioning waterproofing results. Rigid Slurries Semi-flexible Slurries Flexible Slurries one-component two-component two-component Ground Moisture no crack bridging crack bridging ability high crack bridging ability Positive side Negative side On wet substrates Foundation / basement Ground moisture Drinking water tanks Wet areas around pools Balconies / Terraces / Facades Swimming pools / Use water tanks (fire fighter etc.) Positive side Negative side

5 Concrete protection the new scope of use for the cementitious slurries from Ceresit Concrete buildings and structural concrete components are not only exposed to continuous water attacks (rain, snow etc.) but also to high temperatures changes, vibration, movements and sometimes aggressive chemi-cals. CR65 and CR100 can be used to improve concrete surface protection of different structures and elements like humid areas, basements, garages and also water tank reservoirs. CR166 can be used to improve concrete surface protection of different structures and elements like internal humid areas, garages, pillars and bridges. Basement Garages Bathrooms Bridges Industrial Buildings Concrete protection Fields of application and more Terraces + Balconies All humid rooms like: Basements Garages Bathrooms Application fields Details For inside and outside Final layer on substrates without mechanical impact Environmentaly friendly Protects standard concrete structures Pillars Bridges Terraces and balconies Pillars High crack bridging ability Final layer on substrates without mechanical impact For inside and outside Protects reinforced & standard concrete structures

6 Performance characteristics due to EN Easy handling Flexible application The surface protective method we recommend with our Ceresit slurries CR65/CR166 are covered in the area coating of the Principle 2 Moisture Control. Permeability to water vapour Capilliary absorption and permeability to water Adhesion strength by pull of test Substrate preparation Substrate preparation Preparation of edges Mechanically remove sintered layers, cement paste, release agent residues or similar deposits. Repair any defects, cavaties and cracks by filling them with mortar. In the case of uneven brickwork with numerous projections, defects etc., prepare a levelling render with cement mortar. Cove all corners with a hollow moulding of at least 4 cm radius. Coating Used as a coating Ceresit slurries produce a continuous protective layer on the surface of the concrete. Substrate preparation Prewetting Mixing No. of Institute Remove all loose particles with a steel brush and redust the surface. Make sure to thoroughly prewet the prepared substrate Mix slurries with clean water (CR65) or Comp. B (CR166) using a low speed stirring device until the mixture is complete free of lumps. Henkel AG & Co. KGaA, Henkelstr. 67, D Düsseldorf 15 DOP-No. EN Surface protection systems Brush application Trowel application Spray applicaton for concrete moisture control Capillary absortion and permeability to water: The first layer should be applied by a brush. Apply the second layer only when the first layer is already hardened, but still damp with a trowel or with a brush. In case of spray application the slurry should be applied in a single layer until desired thickness is obtained. Permability to water vapour: Adhesion strength by pull-off test: Reaction to fire:

7 For waterproofing and concrete protection CR 65 rigid 1K cementitious waterproofing slurry For waterproofing buildings, structural components and containers CR 100 semi-flexible 2K protective coating and waterproofing slurry For waterpoofing and concrete protection of buildings, structural components and containers CR 166 flexible 2K waterproofing slurry For crack-bridging waterproofing of buildings and structural components Your Ceresit partner Got your interest? For more information please contact our Ceresit partners in the trade or the technical advisory service of Ceresit Bautechnik. Phone: Fax: Henkel AG & Co. KGaA Bautechnik Deutschland Henkelstraße 67 D Düsseldorf Phone: Fax: Internet: