1. Provide a revised bid form (attached to this addendum 11)

Transcription

1 Philadelphia Regional Port Authority 3460 North Delaware Ave. 2 nd Floor Philadelphia, PA July 6, 2018 To: All Bidders From: Kate Bailey Director of Procurement Re: ADDENDUM NO. 11 Project PAMT This Addendum No. 11 is issued to: 1. Provide a revised bid form (attached to this addendum 11) 2. To clarify the following require matching unit pricing for these items: RP1-b, RP1- c; RP2-b, RP2-c; B2A.3-b, B2A.3-c; B2A.4-b, B2A.4-c; W1.23-b, W1.23-c; and W2.23- b, W2.23-c 3. To clarify the following do not require matching unit pricing for items: RP1-a, RP1- d; RP2-a, RP2-d; B2A.3-a, B2A.3-d; B2A.4-a, B2A.4-d; W1.23-a, W1.23-d; and W2.23- a, W2.23-d All other terms and conditions remain unchanged. Bidders shall acknowledge receipt of this addendum by immediately faxing a copy of the completed acknowledgment to Kate Bailey at or procurement@philaport.com ACKNOWLEDGMENT OF RECEIPT OF ADDENDUM NO. 11 Project PAMT Date By Company Telephone Fax

2 Revised Bid Form

3 NOTES: 1. Per the Contract General Conditions, Contractors should understand that by providing a bid price for Unit Price Items, the contractor agrees, acknowledges and accepts the bid quantities estimated in the Bid Form accurately depict quantities in the drawings and other contract documents. 2. PhilaPort will compensate Contractor for pavement related pay items and bollards/fenders each from a separate funding sources, Consequently, the Contractor should invoice labor and material separately for these items. Pavement items include pavement demo, grading, subgrade prep, milling and new pavement. Bollard/fender items include removal of existing bollards and fenders, procurement of new bollards, fenders, chains, pad eyes and other hardware including anchor bolts and all other related activities. The crane beam at fender locations (fender blocks) should not be invoiced with the separate invoicing for fenders& bollards. GEN General Items ITEM DESCRIPTION QTY UNIT UNIT $ TOTAL Milestone GEN.1-a Mobilization includes Project Setup - Field Office for Resident Engineer, Project Manager, contractor temporary offices, utilities, etc. 1 LS $ $ N/A GEN.1-b Demobilization: Includes Project Breakdown including removal of all equipment of site, restoration, and resolution of debts and liens. 1 LS $ $ N/A GEN.2 Insurance: Insurance premium for Contractor provided insurance coverage for the contract duration. 1 LS $ $ N/A GEN.3 Performance and Payment Bonds: Cost for Contractor provided bonds. 1 LS $ $ N/A GEN.4 Soil Erosion & Sediment Control: including all work associated with installation, maintenance, and removal of soil erosion and sediment control measures shown 1 LS $ $ N/A on the drawings and as may be required by the PADEP. GEN.5 Survey: including new topographic survey, and all work necessary to layout and install new construction to the proposed lines and grades within the specified 1 LS $ $ N/A tolerances. GEN.6 Quality Control: Contractor independent quality control program as per Specifications. 1 LS $ $ N/A GEN.7 As-Built Drawings: Furnish one set of as-built drawings of the completed work. 1 LS $ $ N/A GEN.8 Pile Dynamic Analysis Tests; includes all setup and reporting 22 EA $ $ N/A GEN.9 Pile Static Load Test - Compressive - 24" Piles; includes test set-up, and reporting 1 EA $ $ N/A GEN.10 Pile Static Load Test - Compressive - 20" Piles; includes test set-up, and reporting 1 EA $ $ N/A GEN.11 Pile Static Load Test - Compressive - 14" Piles; includes test set-up, and reporting 1 EA $ $ N/A GEN.12 All Remaining Work: Not otherwise identified on the bid form. 1 LS $ $ N/A

4 RP1 Restricted Grading & Paving Area 1 (East) (Milestone 1 Item) RP1-a Restricted Paving Area 2 - New Pavement Area - Grading, Subgrade Prep: All work needed to demo paving, grade site, prepare subbase. Includes T&D of 359 SY $ $ 1 excess fill RP1-b Restricted Paving Area 1 - New Pavement Area - Install DGA: All work needed to place, compact, and testing of DGA course 359 SY $ $ 1 RP1-c Restricted Paving Area 1 - New Pavement Section: All work needed to place and roll 4" HMA pavement binder course section atop DGA base course 359 SY $ $ 1 RP1-d Restricted Paving Area 1 - Pavement Overlay: All work needed to place and roll 2" HMA pavement wearing course section. Includes milling. Includes binder course to level for wearing course. Includes tack coat. 3,569 SY $ $ 1 B2A Stage 1 - Shed 2A Demolition & Yard Grading and Paving (Milestone 2 Items) B2A.1 B2A.2-a B2A.2-b B2A.3-a B2A.3-b B2A.3-c B2A.3-d B2A.4-a B2A.4-b B2A.4-c B2A.4-d Demolition of Shed 2A: All work needed to remove Shed 2A and associated loading docs, including utility terminations, removal of foundations, and offsite disposal of soils and demolition debris. Stormwater Catch Basins in Shed 2A Area: All work needed to provide catch basins in area of former Bldg 2 footprint, including excavation, structures, castings and backfill. Storm drains in Shed 2A Area: All work needed to provide storm drains in area of former Bldg 2 footprint, including excavation, bedding, piping, tie ins to Catch basins/manholes and backfill. Shed 2A Footprint - New Pavement Area - Grading, Subgrade Prep: All work needed to demo paving, grade site, prepare subbase. Includes T&D of excess fill. Does not include Restricted Paving areas Shed 2A Footprint - New Pavement Area - Install DGA: All work needed to place, compact, and testing of DGA course. Does not include Restricted Paving areas. Shed 2A Footprint - New Pavement Section - Binder Course: All work needed to place and roll 4" HMA pavement binder course section atop DGA base course. Does not include Restricted Paving areas. Shed 2A Footprint - Pavement Overlay: All work needed to place and roll 2" HMA pavement wearing course section. Includes milling. Includes binder course to level for wearing course. Includes tack coat. Does not include Restricted Paving areas. Shed 2A Surrounding Yard Area - New Pavement Area - Grading, Subgrade Prep: All work needed to demo paving, grade site, prepare subbase. Includes T&D of excess fill. Does not include Restricted Paving areas. Shed 2A Surrounding Yard Area New Pavement Area - Install DGA: All work needed to place, compact, and testing of DGA course. Does not include Restricted Paving areas. Does not include Restricted Paving areas. Shed 2A Surrounding Yard Area New Pavement Section - Binder Course: All work needed to place and roll 4" HMA pavement binder course section atop DGA base course. Does not include Restricted Paving areas. Shed 2A Surrounding Yard Area - Pavement Overlay: All work needed to place and roll 2" HMA pavement wearing course section. Includes milling. Includes binder course to level for wearing course. Includes tack coat. Does not include Restricted Paving areas. 100,000 SF $ $ 2 2 EA $ $ LF $ $ 2 11,904 SY $ $ 2 11,904 SY $ $ 2 11,904 SY $ $ 2 11,904 SY $ $ 2 7,252 SY $ $ 2 7,252 SY $ $ 2 7,252 SY $ $ 2 7,252 SY $ $ 2

5 B1 Shed 1 Demo, Pavement Removal, Interim Wall Construction (Milestone 4 Items) B1.1 Partial Demolition of Shed 1: All work needed to remove Shed 1 to the limits shown, including utility terminations, removal of foundations, and offsite disposal of demolition debris. B1.2 Salvage and Protection: All work needed to remove, store and protect appliances as shown during demo of Shed 1 (Heating Units, Vents, Security lighting, Security Cameras, Antenna, Doors, Metal Stair Units, Forklift Charging Stations etc.). B1.3 Shed 1 Closure: All work needed to install wall to enclose remaining Shed 1 including reinforcement of existing columns, new foundation wall, new structural elements, Shed skin, roof closure, and new wall and roof at utility room. Includes utility capping and relocation. 1 LS $ $ 4 1 LS $ $ 4 1 LS $ $ 4 B1.4 Shed 1 Overhead Doors: All work needed to frame openings and install overhead doors. 1 EA $ $ 4 B1.5 Shed 1 Personnel Doors: All work needed to frame openings and install personnel egress doors. 3 EA $ $ 4 B1.6 Shed 1 Ventilation: All work needed to provide roof ventilators including equipment, framing as shown. 1 LS $ $ 4 B1.7 Shed 1 Electrical - All work needed to provide conduit, wiring, circuit panels, forklift charging stations, and fixtures as shown. Includes all forklift charging station work. B1.8 Shed 1 Plumbing and Fire Protection - All work needed to provide piping, fixtures as shown, Including Hydrants, Hydrant Corrals, Bollards and Bollard Foundations for all Yard Areas. 1 LS $ $ 4 1 LS $ $ 4 B1.9 Pavement Removal and Excavation: Removal and disposal of paving in former Shed 1 footprint 6,670 SY $ $ 4 B1.10 New Communication/Security Pole(s): All work needed to install and energize high mast light pole provided by Owner. Contractor responsible to obtain shop drawings for installation up to but not limited to bolt pattern, wiring plans, mounting brackets. 1 EA $ $ 4

6 W1 Packer Avenue Marine Terminal Stage 1 Wharf & Yard Improvements: Demo, Construction of Wharf, Grading and Paving in Stage 1 Wharf and Yard Areas (Milestone 4 Items) W1.1 Stage 1 Removal of Existing Fenders and Bollards: Removal and staging of existing fenders and bollards from Stage 1 Area 1 LS $ $ 4 W1.2 Stage 1 Demolition and Removal of Waterside Crane Beam and Frontal Beam: Removal and disposal of waterside crane beam (Berth 2) and frontal beam 1,133 LF $ $ 4 (Berths 1 and 2) to limits shown. W1.3 Stage 1 Demolition and Removal of Train Rail and Ties: Removal and disposal of train rail and ties to limits shown. 1,624 LF $ $ 4 W1.4 Stage 1 Removal of 83'-8" Gage Landside Crane Rail: Removal and disposal of landside crane rail in Stage 1 area. 453 LF $ $ 4 W1.5 Stage 1 Removal of Existing Crane Stops: Removal and disposal of crane stops at north end of existing crane rails. 2 EA $ $ 4 W1.6 Removal of K-2 Crane: All work needed to disassemble, demo, removal and offsite disposal of crane. 1 LS $ $ 4 W1.7-a Stage 1 Waterside Crane Beam, Frontal Beam and Fender Blocks: All work needed to construct frontal beam and waterside crane beam, including excavation, 3,433 CY $ $ 4 formwork, reinforcement, cable tray and cover. Excludes new piles. W1.7-b Stage 1 Waterside Crane Beam Hoyt Street Sewer Crossing: All work needed to construct the composite girder over the Hoyt Street Sewer at the Waterside N/A Crane Beam. Excludes new piles. W1.7-c Stage 1 Waterside Crane Beam Transco Gas Line Crossing: All work needed to construct the composite girder over the Transco pipeline at the 100' LS Crane N/A Beam. Excludes new piles. W1.8 Stage 1 Cable Tray and Cover: All work needed to construct cable tray and cover. 1,123 LF $ $ 4 W1.9-a Stage 1 100' Landside Crane Beam: All work needed to construct 100' landside crane beam, including excavation, formwork, reinforcement. Includes extension of tie-beams to the 90' beam. Excludes new piles. W1.9-b Stage 1 90' Landside Crane Beam: All work needed to construct 90' landside crane beam, including excavation, connection to existing beam, formwork, reinforcement. Excludes new piles. W1.9-c Stage 1 Landside Crane Beam Hoyt Street Sewer Crossing: All work needed to construct the composite girder over the Hoyt Street Sewer at the Waterside Crane Beam. Excludes new piles. W1.9-d Stage 1 Landside Crane Beam Transco Gas Line Crossing: All work needed to construct the composite girder over the Transco pipeline at the 100' LS Crane Beam. Excludes new piles. W1.10-a Stage 1 Wharf - Waterside 24" Diameter Pipe Piles (Closed Ended): Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program, preaugering, coating, reinforcement, and concrete fill. W1.10-a1 Stage 1 Wharf - Pile (Field) Splice Waterside 24" Dia Pipe Piles (Closed Ended) - Pile Splices as directed by Owner's Representative. Does not include splices W1.10-b Stage 1 Wharf - Landside 24" Diameter Pipe Piles (Closed Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program, preaugering, coating, reinforcement, and concrete fill. W1.10-b1 Stage 1 Wharf - Pile (Field) Splice Landside 24" Dia Pipe Piles (Closed Ended) - Pile Splices as directed by Owner's Representative. Does not include splices W1.10-c Stage 1 Wharf - Waterside 20" Diameter Pipe Piles (Open Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program, preaugering, coating, reinforcement, and concrete fill. 1,375 CY $ $ CY $ $ 4 N/A N/A 15,338 LF $ $ 4 1 EA $ $ LF $ $ 4 1 EA $ $ 4 8,409 LF $ $ 4

7 W1.10-c1 Stage 1 Wharf - Pile (Field) Splice Waterside 20" Dia Pipe Piles (Open Ended) - Pile Splices as directed by Owner's Representative. Does not include splices W1.10-d Stage 1 Wharf - Landside 20" Diameter Pipe Piles (Open Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program, preaugering, coating, reinforcement, and concrete fill. W1.10-d1 Stage 1 Wharf - Pile (Field) Splice Landside 20" Dia Pipe Piles (Open Ended) - Pile Splices as directed by Owner's Representative. Does not include splices W1.10-e Stage 1 Wharf - Landside 14" Diameter Pipe Piles (Closed Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program, preaugering, coating, reinforcement, and concrete fill. W1.10-e1 Stage 1 Wharf - Pile (Field) Splice Landside 14" Dia Pipe Piles (Closed Ended) - Pile Splices as directed by Owner's Representative. Does not include splices 1 EA $ $ LF $ $ 4 1 EA $ $ 4 22,649 LF $ $ 4 1 EA $ $ 4

8 W1 (Continued) Packer Avenue Marine Terminal Stage 1 Wharf & Yard Improvements: Demo, Construction of Wharf, Grading and Paving in Stage 1 Wharf and Yard Areas (Milestone 4 Items) W1.10-f Stage 1 Pile Jacketing of Pipe Piles - Includes all activities to install pile jackets on existing piles where indicated. Jacket length on each pile extends from EL EA $ $ (NAVD 88) to bottom of crane beam. W1.10-f1 Stage 1 Pile Jacketing of H-piles - Includes all activities to install pile jackets on existing H-piles where indicated. Jacket length on each pile extends from EL EA $ $ to bottom of crane beam. W1.10-g Stage 1 Pile Wrapping of Pipe Piles- Includes all activities to install pile wraps on existing pipe piles where indicated. Length of wrap on each pile extends from 20 EA $ $ 4 EL to bottom of crane beam. W1.11 New Crane Stops: All work needed to construct crane stops at Waterside and 90' Crane Rail. No Crane stop at the 100' 2 EA $ $ 4 W1.12-a Stage 1 Waterside and Landside Crane Rails: All work needed to construct crane rails including anchor bolts, rail plates, and connecting hardware. Includes 2,614 LF $ $ 4 installation of transition rail to connect with existing Stage 2 rail alignment until construction of Stage 2 rail. W1.12-b Stage 1 Rail Realignment: All work needed for realignment of the transition rail between Stage 2 and Stage 1. Includes all labor and materials needed for 100 LF $ $ 4 realignment of the crane rail and associated anchor bolts, rail plates, and connecting hardware. W1.13-a Stage 1 Select Repair to Existing Concrete Crane Beams and Tie Beams; Includes select demolition, exposure of adjacent rebar, splices, forming, and concrete 30 CY $ $ 4 restoration for areas not otherwise identified and as directed by the Engineer. W1.13-b Stage 1 Additional Reinforced Concrete as needed for New Crane Rail Beams, and other structures, including formwork, splices, finishing. 200 CY $ $ 4 W1.14-a Crane Tie-Down Locations: All work needed to construct two waterside and landside tie-down pits at locations as shown. Line item price includes hardware, additional concrete, reinforcing steel, and anchor bolts. 28 EA $ $ 4 W1.14-b Crane Stow Sockets: All work needed to construct each stow pin socket, at locations shown. Line item price includes hardware, additional concrete, reinforcing steel, and anchor bolts. 25 PAIR $ $ 4 W1.15-a Stage 1 Crane Power 13.2 kv Manhole: All work needed to crane power pit including cable anchor, turnout box, and cover. 1 EA $ $ 4 W1.15-b Stage 1 Crane Power Interface Pit: All work needed to crane power pit including cable anchor, turnout box, and cover. 1 EA $ $ 4 W1.15-c Stage 1 Shore Power Receptacles: All work needed to provide 480-V shore Power receptacles at stow locations as shown including housing fabrications and 5 EA $ $ 4 installation, receptacles, and equipment. W1.15-d Stage 1 Shore Power: All work needed to energize shore power receptacles including cabling, switch gear, and connections 3-pole breakers, and NEMA 4X Pull 1 LS $ $ 4 W1.16 Bo es Stage 1 Cold Ironing Stations: All work needed to construct cold ironing stations identified in Stage 1 Area including manholes, and conduit 3 EA $ $ 4 W 1.17 Stage 1 Electrical Manholes: All work needed to install electrical manholes, including grounding, excavation, structure, casting, and backfill. 3 EA $ $ 4 W 1.18 Stage 1 Electrical Handholes: All work needed to install electrical handholes, including grounding, excavation, structure, casting, and backfill. 8 EA $ $ 4 W 1.19 Stage 1 Fiber Optic Manholes: All work needed to install electrical handholes, including grounding, excavation, structure, casting, and backfill. 1 EA $ $ 4 W1.20-a Stage 1 2x4" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 150 LF $ $ 4 W1.20-b Stage 1 10x6" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 10 LF $ $ 4 W1.20-c Stage 1 6x4" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 750 LF $ $ 4 W1.20-d Stage 1 10x2" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 80 LF $ $ 4

9 W1.20-e Stage 1 5x2" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 175 LF $ $ 4 W1.20-f Stage 1 4x2" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 700 LF $ $ 4 W1.21-a Stage 1 (1,2,3)x2" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 750 LF $ $ 4 W1.21-c Stage 1 3x4" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 350 LF $ $ 4 W1.21-d Stage 1 6x6" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 100 LF $ $ 4 W1.22-a Stage 1 LV Cable Installation: All work needed to install LV Cable and Power Cable as shown into Duct Banks. Duct Banks included as a separate line item 5,200 LF $ $ 4 W1.22-b Stage 1 MV Cable Installation: All work needed to install MV Cable and Power Cable as shown into Duct Banks. Duct Banks included as a separate line item 300 LF $ $ 4

10 W1 (Continued) W1.23-a Stage 1 Wharf & Yard Improvements: Demo, Construction of Wharf, Grading and Paving in Stage 1 Wharf and Yard Areas Stage 1 Wharf and Yard New Pavement Area - Grading, Subgrade Prep: All work needed to demo paving, grade site, prepare subbase. Includes T&D of excess fill. (Milestone 4 Items) 13,758 SY $ $ 4 W1.23-b Stage 1 Wharf and Yard New Pavement Area - Install DGA: All work needed to place, compact, and testing of DGA course. 13,758 SY $ $ 4 W1.23-c Stage 1 Wharf and Yard New Pavement Section - Binder Course: All work needed to place and roll 4" HMA pavement binder course section atop DGA base 13,758 SY $ $ 4 course. W1.23-d Stage 1 Wharf and Yard Pavement Overlay: All work needed to place and roll 2" HMA pavement wearing course section. Includes milling. Includes binder 23,517 SY $ $ 4 course to level for wearing course. Includes tack coat. W1.24-a SMP Manholes: All work needed to provide and install manholes at SMP Filter locations as shown. Includes excavation, bedding, piping, tie ins to Catch 6 EA $ $ 4 basins/manholes, backfill and paving W1.24-b SMP Filters: All work needed to install Aquafilter AF EA $ $ 4 W1.24-c SMP Filters: All work needed to install Aquafilter Aqua-Filter AF EA $ $ 4 W1.24-d SMP Storm drains: All work needed to provide storm drains at SMP Filter locations including excavation, bedding, piping, tie ins to Catch basins/manholes, 76 LF $ $ 4 backfill and Paving W1.25-a Stage 1 Bollards: All work needed to install new 100 ton bollards, including anchor bolts, concrete fill and grout. 32 EA $ $ 4 W1.25-b Stage 1 Fenders: All work needed to install new fenders, including anchor bolts, Fenders, chains, and associated hardware. 16 EA $ $ 4 RP2 Restricted Grading & Paving Area 2 (West) (Milestone 5 Item) RP1.2-b Restricted Paving Area 2 - New Pavement Area - Grading, Subgrade Prep: All work needed to demo paving, grade site, prepare subbase. Includes T&D of 2,835 SY $ $ 5 excess fill RP1.2-b Restricted Paving Area 2 - New Pavement Area - Install DGA: All work needed to place, compact, and testing of DGA course 2,835 SY $ $ 5 RP1.2-c Restricted Paving Area 2 New Pavement Section: All work needed to place and roll 4" HMA pavement binder course section atop DGA base course 2,835 SY $ $ 5 RP1.2-d Restricted Paving Area 2 - Pavement Overlay: All work needed to place and roll 2" HMA pavement wearing course section. Includes milling. Includes binder course to level for wearing course. Includes tack coat. 4,112 SY $ $ 5

11 W2 Packer Avenue Marine Terminal Stage 2 Wharf & Yard Improvements: Demo, Construction of Wharf, Grading and Paving in Stage 2 Wharf and Yard Areas (Milestone 6 Items) W2.1 Stage 2 Removal of Existing Fenders and Bollards: Removal and staging of existing fenders and bollards from Stage 2 Area. 1 LS $ $ 6 W2.2 Stage 2 Demolition and Removal of Waterside Crane Beam and Frontal Beam: Removal and disposal of waterside crane beam and frontal beam to limits 616 LF $ $ 6 shown. W2.3 Stage 2 Demolition and Removal of Train Rail and Ties: Removal and disposal of train rail and ties to limits shown. 617 LF $ $ 6 W2.4 Stage 2 Removal of 83'-8" Gage Landside Crane Rail: Removal and disposal of landside crane rail in Stage 2 area and grouting of existing rail pocket. 616 LF $ $ 6 W2.5 Stage 2 Waterside Crane Beam, Frontal Beam and Fender Blocks: All work needed to construct frontal beam and waterside crane beam, including excavation, 1,700 CY $ $ 6 formwork, reinforcement, cable tray and cover. Excludes new piles. W2.6 Waterside Crane Beam Hoyt Street Sewer Crossing: All work needed to construct the composite girder over the Hoyt Street Sewer at the Waterside Crane 1 LS $ $ 6 Beam. Excludes new piles. W2.7 Waterside Crane Beam Transco Gas Line Crossing: All work needed to construct the composite girder over the Transco pipeline at the 100' LS Crane Beam. 1 LS $ $ 6 Excludes new piles. W2.8 Stage 2 Cable Tray and Cover: All work needed to construct cable tray and cover. 616 LF $ $ 6 W2.9-a Stage 2 100' Landside Crane Beam: All work needed to construct 100' landside crane beam, including excavation, formwork, reinforcement. Excludes new piles. Excludes Hoyt Sewer Crossing and Transco Crossing W2.9-b Landside Crane Beam Hoyt Street Sewer Crossing: All work needed to construct the composite girder over the Hoyt Street Sewer at the 100' LS Crane Beam. Excludes new piles. W2.9-c Landside Crane Beam Transco Gas Line Crossing: All work needed to construct the composite girder over the Transco pipeline at the 100' LS Crane Beam. Excludes new piles. W2.10-a Stage 2 Wharf - Waterside 24" Diameter Pipe Piles (Closed Ended): Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program. Includes all splices, preaugering, coating, reinforcement, and concrete fill. W2.10-a1 Stage 2 Wharf - Pile (Field) Splice Waterside 24" Dia Pipe Piles (Closed Ended) - Pile Splices as directed by Owner's Representative. Does not include splices W2.10-b Stage 2 Wharf - Landside 24" Diameter Pipe Piles (Closed Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing. Includes all splices, preaugering, coating, reinforcement, and concrete fill. W2.10-b1 Stage 2 Wharf - Pile (Field) Splice Landside 24" Dia Pipe Piles (Closed Ended) - Pile Splices as directed by Owner's Representative. Does not include splices W2.10-c Stage 2 Wharf - Waterside 20" Diameter Pipe Piles (Open Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program. Includes all splices, preaugering, coating, reinforcement, and concrete fill. W2.10-c1 Stage 2 Wharf - Pile (Field) Splice Waterside 20" Dia Pipe Piles (Open Ended) - Pile Splices as directed by Owner's Representative. Does not include splices W2.10-d Stage 2 Wharf - Landside 20" Diameter Pipe Piles (Open Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program. Includes all splices, preaugering, coating, reinforcement, and concrete fill. W2.10d1 Stage 2 Wharf - Pile (Field) Splice Landside 20" Dia Pipe Piles (Open Ended) - Pile Splices as directed by Owner's Representative. Does not include splices 576 CY $ $ 6 1 LS $ $ 6 1 LS $ $ 6 8,017 LF $ $ 6 1 EA $ $ 6 1,094 LF $ $ 6 1 EA $ $ 6 4,437 LF $ $ 6 1 EA $ $ 6 N/A N/A

12 W2.10-e Stage 2 Wharf - Landside 14" Diameter Pipe Piles (Closed Ended); Driven to ultimate capacity. Includes all shop and field splices to fabricate pile to approved length as determined during testing program. Includes all splices, preaugering, coating, reinforcement, and concrete fill. 5,033 LF $ $ 6 W2.10-e1 Stage 2 Wharf - Pile (Field) Splice Landside 14" Dia Pipe Piles (Closed Ended) - Pile Splices as directed by Owner's Representative. Does not include splices 1 EA $ $ 6 W2.10-f Stage 2 Pile Jacketing of Pipe Piles - Includes all activities to install pile jackets on existing piles where indicated. Jacket length on each pile extends from EL EA $ $ to bottom of crane beam. W2.10-g Stage 2 Pile Wrapping: Includes all activities to install pile wraps on existing pipe piles where indicated. N/A

13 W2 (Continued) Packer Avenue Marine Terminal Stage 2 Wharf & Yard Improvements: Demo, Construction of Wharf, Grading and Paving in Stage 2 Wharf and Yard Areas (Milestone 6 Items) W2.11 Stage 2 Waterside and Landside Crane Rails: All work needed to construct crane rails including anchor bolts, rail plates, and connecting hardware. 1,082 LF $ 6 W2.12 Stage 2 Rail Realignment: All work needed for realignment of the transition rail between Phase 2 Stage 2 and Phase 1 upon completion of Phase 2 Stage LF $ $ 6 Includes Crane Rail anchor bolts, rail plates, and connecting hardware. W2.13-a Stage 2 Select Repair to Existing Concrete Crane Beams and Tie Beams; Includes select demolition, exposure of adjacent rebar, splices, forming, and concrete 20 CY $ $ 6 restoration for areas not otherwise identified and as directed by the Engineer. W2.13-b Stage 2 Additional Reinforced Concrete as needed for New Crane Rail Beams, and other structures, including formwork, splices, finishing. 100 CY $ $ 6 W2.14 Crane Stow Sockets: All work needed to construct each stow pin socket, at locations shown. Line item price includes hardware, additional concrete, reinforcing steel, and anchor bolts. 14 PAIR $ $ 6 W2.15-a Stage 2 Shore Power Receptacles: All work needed to provide 480-V shore Power receptacles at each stow location as shown including housing fabrications, 4 EA $ $ 6 receptacles, and equipment. W2.15-b Stage 2 Shore Power: All work needed to energize shore power receptacles including cabling, switch gear, and connections. 1 LS $ $ 6 W2.16 Stage 2 Cold Ironing Stations: All work needed to construct cold ironing stations identified in Stage 1 Area. 2 EA $ $ 6 W2.17 Stage 2 Electrical Manholes: All work needed to install electrical manholes, including grounding, excavation, structure, casting, and backfill. 3 EA $ $ 6 W2.18 Stage 2 Electrical Handholes: All work needed to install electrical handholes, including grounding, excavation, structure, casting, and backfill. 2 EA $ $ 6 W2.19 Stage 2 Fiber Optic Manholes: All work needed to install Fiber-Optic Manholes including grounding, excavation, structure, casting, and backfill. N/A W2.20-a Stage 2-2x4" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 500 LF $ $ 6 W2.20-b Stage 2 10x6" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 500 LF $ $ 6 W2.21-a Stage 2-6x4" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 500 LF $ 6 W2.21-b Stage 2 (1,2,3)x2" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 300 LF $ $ 6 W2.21-c Stage 2 3x4" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 250 LF $ $ 4 W2.21-d Stage 1 4x2" Duct Bank: All work needed to install duct bank including excavation, conduits, concrete, and grounding. 25 LF $ $ 4 W2.22-a W2.22-b Stage 2 LV Cable Installation (4x2, #4G LV): All work needed to install Low Voltage Cable and Power Cable as shown into Duct Banks. Duct Banks included as a separate line item Stage 2 MV Cable Installation (3#2/0. #4 Bare G, #6 Ins G MV Cable, MV Cable Sta to Substation ): All work needed to install Medium Voltage Cable and Power Cable as shown into Duct Banks. Duct Banks included as a separate line item 700 LF $ $ 6 3,200 LF $ $ 6 W2.23-a Stage 2 Wharf and Yard Area New Pavement Area - Grading, Subgrade Prep: All work needed to demo paving, grade site, prepare subbase. Includes T&D of 10,189 SY $ $ 6 excess fill W2.23-b Stage 2 Wharf and Yard Area New Pavement Area - Install DGA: All work needed to place, compact, and testing of DGA course 10,189 SY $ $ 6

14 W2.23-c Stage 2 Wharf and Yard Area New Pavement Section - Binder Course: All work needed to place and roll 4" HMA pavement binder course section atop DGA 10,189 SY $ $ 6 base course W2.23-d Stage 2 Wharf and Yard Area Pavement Overlay: All work needed to place and roll 2" HMA pavement wearing course section. Includes milling. Includes 21,192 SY $ $ 6 binder course to level for wearing course. Includes tack coat. W2.24-a Stormwater Catch Basins in Shed 2A Area: All work needed to provide catch basins in area of former Bldg 2 footprint, including excavation, structures, castings 2 EA $ $ 6 and backfill. W2.24-b Storm drains in Shed 2A Area: All work needed to provide storm drains in area of former Bldg 2 footprint, including excavation, bedding, piping, tie ins to Catch 351 LF $ $ 6 basins/manholes and backfill. W2.25-a Stage 2 Bollards: All work needed to install new 100 ton bollards, including anchor bolts, concrete fill and grout. Bollards provided by Owner. 16 EA $ $ 6 W2.25-b Stage 2 Fenders: All work needed to install new fenders, including anchor bolts. Fenders, chains, and associated hardware provided by Owner. 8 EA $ $ 6