Residential and public use. Permanently damp environments and direct contact with water. Outdoors, use pro-part inox. Do not use in pools.

Transcription

1 Data seet pro-telo Metal decorative profile for ceramic wall tiles. Flangeless metallic line for tiles of any tickness. Available in a wide variety of materials, finises and dimensions, tey represent an excellent solution for te design of contemporary style ceramic settings. Recommended use: Decorative line in ceramic wall tiles. Separation of wall tiles wit different designs or formats. Transition at same level between different floor tile types. Floor decoration. Residential and public use. Permanently damp environments and direct contact wit water. Outdoors, use pro-part inox. Do not use in pools. Materials Anodized aluminium. V2A-type stainless steel. Cromed brass. Substrates All substrates suitable for ceramic tiles laying. A suitable substrate for laying ceramics wit te tin-bed metod must be clean, dry, compact, wit a roug texture and flat (deviations inferior to 3 mm every 2 m of surface). Features pro-telo stainless U-saped, folded metallic profile. 8 mm ig side. Smoot edge in 10, 25 or 40 mm. pro-telo aluminium U-saped, folded metallic profile. 10 mm ig side. 10 mm rounded front side. pro-telo recto U-saped, folded metallic profile. 10 mm ig side. 10 mm smoot, rounded front.

2 pro-telo pro-telo mosaic U-saped, folded metallic profile. 4 mm ig side. It features two side flanges wic create a 1 mm tiling joint. 25 mm smoot, rounded front. Profile types pro-telo anodized aluminium Aluminium profile manufactured by extrusion and anodized cemical treatment. Its cost-effectiveness makes tis profile te best solution for all kinds of projects. Features: Silver / Gold Matt and gloss Wall tile Indoor / Outdoor. Te anodization treatment protects aluminium from rust and limits scratces. Protect from any abrasive element wic could scratc te exposed profile surface. Anodized aluminium profiles are sensible to te combination of dampness and alkaline products like cement mortars. It is recommended to be extremely careful wen installing tem. Avoid contact wit cement mortars as far as possible an clean any mortar stain wic affects te exposed edge of te profile as soon as possible. pro-telo stainless Stainless steel profiles are produced by folding, so teir sape is sligtly different to tat of aluminium or brass profiles. Angles and sapes will always ave a rounded finis. Profiles made of V2A stainless steel are igly resistant bot to mecanical stress and cemical attack. Specially recommended outdoors. Features: Matt/Gloss/Brused Floor / Wall Indoor / Outdoor. Te profile is supplied wit a plastic film protecting it during installation. Once te profile installed, peel off te film wit a cutter. - - Not recommended for use in pools or any oter use in direct contact wit concentrated cemicals. In any case, we recommend you perform a previous test to ceck its suitability.

3 pro-telo pro-telo cromed Brass profile manufactured by extrusion, crome plated and gloss polised. Hig finis and gloss profile. Specially recommended for decorating indoor wall tiles. Features: Gloss Wall tile Indoors. Protect from any abrasive element wic could scratc te exposed profile surface. Instructions for use Coose te profile according to te tile tickness. Do not coose profiles wit a widt bigger tat tat of te tile or mosaic. Lay te tile wit te tin-bed metod, wit adesive and a notced trowel. Apply a layer of adesive on te back of te profile and ceck tat fills all te oles. Apply a tin layer of adesive on te substrate and place te profile. Apply a tin layer of adesive on te substrate and press te profile against te adesive. Ceck tat te contact between te adesive and te profile is total. Level te profile wit te tile. Do not leave te profile above te tile level. As a general rule, we recommend to leave 1 mm joint between te profile and te tile. In stable substrates wit no movement risk, a minimum joint can be used. Before laying te following ceramic line, ceck tat te bonding material as ardened enoug as for te weigt of te ceramics not to move te profile. Before sealing te tiling joints, ceck tat te grouting material cosen does not scratc nor cemically alters te profile surface. If it does, cover te profile wit protective tape. Fill completely te joint between tile and profile wit grouting material. Never let te grouting material arden on te profile. Peel te protective film covering te profile. Never use metallic tools or abrasive elements wic can scratc te profile surface. Cut te profile wit a and saw or wit a circular saw wit a suitable disc. Be extremely cautious wen cutting stainless steel profiles. Cleaning and maintenance Tese profiles do not need cleaning and maintenance different from te tiles in wic tey are installed. Use neutral cleaning products. Do not use products containing ydrocloric or ydrofluoric acid. In any case, we recommend you perform a previous test before use. Do not use abrasive or metallic elements wic can scratc te profile surface.

4 pro-telo Data Seet Conditions Tis is not a finised product tecnical seet. It belongs to a product wic, togeter wit oters, is te base of a ceramic tile laying system wit wic professionals perform teir job. Instructions in tis tecnical seet ave been written based on our experience and tecnical expertise, but tey ave to be considered as general recommendations, wic togeter wit tose for te rest of te products in te system, elp te professionals in teir job. As it is not possible to know all te features and conditions of a building job, professionals must consider it and, if deemed appropriate, perform a previous test to confirm weter te product is suitable for te job. Specially recommended in applications wic imply mecanical stresses or cemical reactions not described in tis tecnical seet. Te tecnical seet cannot reflect all te applications and conditions entailed in te use of a material, so, in situations not described in tis seet, we recommend to perform a previous test and refer to our tecnical department. Tis seet as been updated in January, 2013.

5 pro-telo

6 pro-telo pro-telo stainless 8x40 pro-telo 8x40 Stainless Steel 8x40 B Gloss 8 B Brused 8 pro-telo stainless 8x25 pro-telo 8x25 Stainless Steel 8x25 B Gloss 8 B Brused 8 B Berlin 8 B Squared crome 8 pro-telo stainless 8x10 pro-telo 8x10 Stainless Steel 8x10 B Matt Ceranco 8 B Gloss Ceranco 8 pro-telo aluminium pro-telo Aluminium Aluminium 8x10 gloss B Gold 10 B Silver 10 Aluminium 8x10 anodized B Gold 10 B Silver 10 pro-telo recto pro-telo Recto Aluminium 8x10 B Hig gloss 8 B Silver anodized 8 B Titanium 8 B Cosmos 8 pro-telo mosaic Cromed brass B Mosaic 25 4 B Mosaic Porcelanosa 4 25 pro-telo mosaic Profile lengt: 2500 mm pro-telo titanium profile lengt: 2400 mm Minimum packaging: 10 profiles

7 Data seet pro-telo wood Wood and cromed brass decorative profile for ceramic wall tiles. Available in 15 and 25 cm planks, it can be used for decorating walls and floors. Excellent solution for designing classic style settings. Recommended use: Decorative line in ceramic wall tiles. Separation of wall tiles wit different designs or formats. Framing of wall tiles. Transition at same level between different floor tile types. Floor decoration. Residential use. Permanently damp environments and direct contact wit water. We do not recommend te use of tese profiles in: Outdoor floor and wall tiles. Permanently damp environments and direct contact wit water. Pools Materials Natural wood and cromed brass. Substrates All substrates suitable for ceramic tiles laying. A suitable substrate for laying ceramics wit te tin-bed metod must be clean, dry, compact, wit a roug texture and flat (deviations inferior to 3 mm every 2 m of surface). Features Natural wood plank mm ig side. Smoot edge in 15 or 25 mm. Te wood is supplied treated and protected by a protective film. Two side flanges ease installation.

8 pro-telo wood Profile types Wood plank Varnised natural wood plank. Specially recommended for classic style settings. Features Walnut/Maogany/Wenge wood. Floor / Wall. Indoors. Protect during installation from contact wit mortar or water. Protect from any abrasive element wic could scratc te exposed profile surface. Te planks are supplied varnised and protected by a protective film. Prior to installation, ceck tat te sade of te wooden planks is te same among all te pieces available. Te sade can cange sligtly between different production batces. Cromed side flanges Brass profile manufactured by extrusion, crome plated and gloss polised. Hig finis and gloss profile. Features: Gloss Wall tile Indoors. Protect from any abrasive element wic could scratc te exposed profile surface. Instructions for use Coose te profile according to te tile tickness. We recommend to coose a profile at least 1 mm ticker tan te tile. Lay te tile wit te tin-bed metod, wit adesive and a notced trowel. Press te profile flanges on te adesive and ceck tat it is covered by te bonding material. Level te profile wit te tile. Do not leave te profile above te tile level. As a general rule, we recommend to leave 1 mm joint between te profile and te tile. In stable substrates wit no movement risk, a minimum joint can be used. Before sealing te tiling joints, ceck tat te grouting material cosen does not scratc nor cemically alters te profile surface. Fill completely te joint between tile and profile wit grouting material. Never let te grouting material arden on te profile. Peel te protective film covering te profile. Never use metallic tools or abrasive elements wic can scratc te profile surface. Cut te profile wit a and saw or wit a circular saw wit a suitable disc. Be extremely cautious wen cutting stainless steel profiles.

9 pro-telo wood Cleaning and maintenance Tese profiles do not need cleaning and maintenance different from te tiles in wic tey are installed. Use neutral cleaning products. Do not use products containing ydrocloric or ydrofluoric acid. In any case, we recommend you perform a previous test before use. Do not use abrasive or metallic elements wic can scratc te profile surface. Data Seet Conditions Tis is not a finised product tecnical seet. It belongs to a product wic, togeter wit oters, is te base of a ceramic tile laying system wit wic professionals perform teir job. Instructions in tis tecnical seet ave been written based on our experience and tecnical expertise, but tey ave to be considered as general recommendations, wic togeter wit tose for te rest of te products in te system, elp te professionals in teir job. As it is not possible to know all te features and conditions of a building job, professionals must consider it and, if deemed appropriate, perform a previous test to confirm weter te product is suitable for te job. Specially recommended in applications wic imply mecanical stresses or cemical reactions not described in tis tecnical seet. Te tecnical seet cannot reflect all te applications and conditions entailed in te use of a material, so, in situations not described in tis seet, we recommend to perform a previous test and refer to our tecnical department. Tis seet as been updated in January, 2013.

10 pro-telo wood

11 pro-telo wood pro-telo W pro-telo W pro-telo W 15 cromed brass B Caoba B Wenge B Nogal pro-telo W 25 cromed brass B Caoba B Wenge B Nogal Profile lengt: 2500 mm Minimum packaging: 10 profiles