Transcription

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15 PART 1 GENERAL 1.1 SECTION INCLUDES SECTION ALUMINUM-CLAD WOOD WINDOWS AND PATIO DOORS JELD-WEN W-2500 Series A. Aluminum Clad Wood Windows and Patio Doors: [Awning windows] [Casement windows] [Double-hung windows] [Fixed windows] [Sliding patio doors] [Swinging patio doors]. 1.2 REFERENCES A. Window and Door Manufacturers Association (WDMA): 1. AAMA/WDMA/CSA 101/I.S.2/A440 North American Fenestration Standard/Specification for windows, doors, and skylights (NAFS) 2. WDMA I.S.4; Water Repellent Preservative Non-Pressure treatment for Millwork B. National Fenestration Rating Council (NFRC): 1. NFRC Procedure for Determining Fenestration Product U-Factors. 2. NFRC 200 Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence. A. ASTM International (ASTM): 1. ASTM E330 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference 1.3 SUBMITTALS A. Submit under provisions of Section Administrative Requirements. B. Product Data: Manufacturer's data sheets on each product to be used, including: 1. Preparation instructions and recommendations. 2. Storage and handling requirements and recommendations. 3. Installation methods. C. Shop Drawings: Submit shop drawings indicating details of construction, flashings and relationship with adjacent construction. D. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square,representing actual product, color, and patterns. E. Quality Assurance Submittals: 1. Design Data, Test Reports: Provide manufacturer test reports indicating product compliance with indicated requirements. F. Closeout Submittals: Refer to Section Execution and Closeout Requirements Closeout Submittals. 1.4 QUALITY ASSURANCE A. Installer Qualifications: Minimum 2 years installing similar assemblies. B. Mock-Up: Provide a mock-up for evaluation of installation techniques and workmanship. 1. Mock-ups shall incorporate surrounding construction, including wall assembly fasteners, flashing, and other related accessories installed in accordance with manufacturer's approved installation methods. 2. Do not proceed with remaining work until workmanship is approved by Architect. 3. Rework mock-up as required to produce acceptable work. 4. At Substantial Completion, approved mockups may become part of completed work. 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

16 5. Demolish mockups and remove from site. C. Pre-installation Meeting: Conduct pre-installation meeting on-site two weeks prior to commencement of installation. 1.5 DELIVERY, STORAGE, AND HANDLING A. Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards. B. Deliver and store assembly materials and components in manufacturer's original, unopened, undamaged containers with identification labels intact. Protect from damage. 1.6 PROJECT CONDITIONS A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits. 1.7 WARRANTY A. Manufacturer's Standard Warranty: Assemblies will be free from defects in materials and workmanship from the date of manufacture for the time periods indicated below: 1. Window Unit: 20 years. 2. Patio Door Unit: 20 years. 3. Cladding Finish: 10 years against peeling, checking, cracking caulk or color change. 4. Insulated Glass: 20 years against seal breakage. 5. AuraLast Protection for wood products: [Owner-Occupied Single-Family Residence: as long as you own and occupy your residence] [Commercial: 20 years]. a. Coverage is for wood decay and/or termite damage in pine wood components. PART 2 PRODUCTS 2.1 MANUFACTURERS A. Acceptable Manufacturer: JELD-WEN, Inc.; 2645 Silver Crescent Drive, Charlotte, NC 28273; Toll Free Tel: ; Tel: ; Fax: ; mailto:architectural_inquiries@jeld-wen.com; Web: B. Substitutions: Not permitted. C. Requests for substitutions will be considered in accordance with provisions of Section Product Requirements. 2.2 ALUMINUM CLAD WOOD WINDOWS AND PATIO DOOR GENERAL A. Design Requirements: 1. Compliance: Provide assemblies capable of complying with requirements indicated, based on testing manufacturer's units that are representative of those specified. 2. Test Size: In compliance with requirements of AAMA/WDMA/CSA 101/I.S2/A Structural Requirements: Provide assemblies complying with requirements indicated: a. Performance Class: As indicated on drawings. b. Performance Class:. c. Performance Grade: As indicated on drawings. d. Performance Grade:. 4. NFRC Requirements: Provide assemblies complying with the following total window ratings: a. U-Factor: in accordance with NFRC 100. b. Solar Heat Gain Coefficient (SHGC): in accordance with NFRC 200. c. Visible Transmittance (VT): in accordance with NFRC 200. B. Installation Accessories: 1. Flashing: Refer to Section Flashing and Sheet Metal. 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

17 2. Sealants: OSI Sealants by Henkel Corporation 3. Sealants: Refer to Section Joint Sealants. 4. Sealants: Manufacturer recommended sealants to maintain watertight conditions. C. Materials 1. Exterior Cladding: Roll formed sash with extruded frame. 2. Interior Wood: AuraLast Pine. D. Finishes 1. Interior Finish for Windows: a. Finish: [Natural, Standard] [Painted White Frame/Vinyl Wrap Sash] [Natural Frame/Vinyl Wrap Sash] [Primed] [Clear Lacquer]. b. Finish: Optional pre-finished paint. 1) Color: [As Selected by Architect] [Brilliant White] [Desert Sand] [Ivory] [Black] [Dove] [Gunmetal]. c. Finish: Optional pre-finished stain finish. 1) Color: [As Selected by Architect] [Cordovan] [Walnut] [Americano] [Charcoal] [Kodiak]. 2. Exterior Finishes for Windows: a. Standard Sash: 1) Color: [As selected by Architect] [Brilliant White] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Black] [Desert Sand]. b. Traditional Sash: 1) Color: [As selected by Architect] [Brilliant White] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Mesa Red] [Black] [Hartford Green] [Arctic Silver] [Dark Chocolate]. 3. Interior Finish for Sliding Patio Doors: a. Finish: [Natural (Standard)] [Primed] [Clear Lacquer]. b. Finish: Optional pre-finished paint. 1) Color: [As Selected by Architect] [Brilliant White] [Desert Sand] [Ivory] [Black] [Dove] [Gunmetal]. c. Finish: Optional pre-finished stain finish. 1) Color: [As Selected by Architect] [Cordovan] [Walnut] [Americano] [Charcoal] [Kodiak]. 4. Interior Finish for Swinging Patio Doors: a. Finish: [Natural (Standard)] [Primed] [Clear Lacquer]. b. Finish: Optional pre-finished paint. 1) Color: [As selected by Architect] [Brilliant White] [Ivory] [Desert Sand] [Painted White]. c. Finish: Optional pre-finished stain finish. 1) Color: [As selected by Architect] [Cider] [Fruitwood] [Cordovan] [Walnut] [Wheat]. 5. Exterior Finishes for Sliding Patio Doors: a. Color: [As selected by Architect] [Brilliant White] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Mesa Red] [Black] [Hartford Green] [Arctic Silver] [Dark Chocolate]. 6. Exterior Finishes for Swinging Patio Doors: a. Color: [As selected by Architect] [Brilliant White] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Mesa Red] [Black] [Hartford Green]. 2.3 ALUMINUM-CLAD WOOD WINDOW ASSEMBLIES A. Basis of Design: Aluminum-clad wood window assemblies as manufactured by JELD-WEN, Inc. 1. Window Type: [Awning windows] [Casement windows] [Double-hung windows] [Fixed windows] [Radius and Geometric Windows]. B. Window Fabrication 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

18 1. Window Type: Awning windows. a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock. b. Sash: Corner joints mortise-and-tenon, and mechanically fastened. c. Glass: Mounted using silicone glazing compound. 2. Window Type: Casement windows. a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock. b. Sash: Corner joints mortise-and-tenon, and mechanically fastened. c. Glass: Mounted using silicone glazing compound. 3. Double-Hung Windows: a. Frame: Reinforced nylon corner locks in head frame, and all corners injected with sealant. b. Sash: Corner joints mortise-and-tenon, and mechanically fastened. c. Glass: Mounted using silicone glazing compound. 4. Fixed Windows: a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock. b. Sash: Corner joints mortise-and-tenon, and mechanically fastened. c. Glass: Mounted using silicone glazing compound. 5. Radius and Geometric Windows: a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock. b. Sash: Corner joints mortise-and-tenon, and mechanically fastened. c. Glass: Mounted using silicone glazing compound. C. Frames: 1. Select kiln-dried pine AuraLast treated wood. 2. Casement, Awning, and Radius and Geometric Windows Base Frame: 3-3/16 inch (81 mm). 3. Double-Hung Windows Base Frame: 4-9/16 inch (116 mm). 4. Jamb Width: 4-9/16 inch (116mm). 5. Cladding: to.060 inch (1.27 to 1.52 mm) extruded aluminum. D. Sashes: 1. Select kiln-dried pine AuraLast treated wood. 2. Cladding: inch (0.61mm) roll-formed aluminum. 3. Sash Thickness: [Awning Windows: 1-11/32 inches (34 mm)] [Casement Windows: 1-11/32 inches (34 mm)] [Double-Hung Traditional 1-9/32 inches (33 mm)] [Double-Hung Standard 1-11/32 inches (34 mm)]. E. Exterior Trim: 1. Nailing Fin: [Integral extruded aluminum on all four sides of frame] [No Drip Cap/No Nail Fin]. 2. Casing: [Extruded Aluminum Brickmould Casing] [Extruded Aluminum Adams Casing] [Extruded Aluminum 3-1/2 inches (88.5 mm) Flat Casing]. F. Factory Applied Extension Jambs: Provide on four sides of frame interior. 1. Awning Windows: [From 4 9/16 inches up to 7-15/16 inches (116 mm to 202 mm) as scheduled or indicated]. 2. Casement Windows: [From 4 9/16 inches up to 7-15/16 inches (116 mm to 202 mm) as scheduled or indicated]. 3. Double-Hung Windows: [From 5-3/4 inches up to 10-9/16 inches (146 mm to 268 mm) as scheduled or indicated]. 4. Fixed Windows: [From 4 9/16 inches up to 7-15/16 inches (116 mm to 202 mm) as scheduled or indicated]. 5. Radius and Geometric Windows: [From 4-9/16 inches up to 7-15/16 inches (81 mm to 202 mm) as scheduled or indicated]. G. Weatherstripping: 1. Awning: Rigid vinyl leaf at top and sides of sash. TPE bulb at frame. 2. Casement: Rigid vinyl leaf at top and sides of sash. TPE bulb at frame. 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

19 3. Double-hung: Foam filled bulb at top and bottom, Flexible TPE bulb at check rail. a. Jamb Liner Color: [White (Standard)] [Tan]. 4. Fixed: Rigid vinyl leaf at top and sides of sash. TPE bulb at frame. H. Hardware: 1. Awning Windows: a. Hinges: Concealed. b. Operator: Stainless Steel Dual Arm. 1) Awning: Stainless steel scissor type. c. Lock: Concealed. d. Handle Profile: Manual Folding Crank (Standard). e. Finish: [White (Standard)] [Desert Sand] [Chestnut Bronze] [Polished Brass] [Antique Brass] [Brushed Chrome] [Oil-Rubbed Bronze]. 2. Casement Windows: a. Hinges: Concealed. b. Operator: Stainless Steel Dual Arm. 1) Casement: Stainless steel dual arm or split arm. c. Lock: Concealed. d. Handle Profile: Manual Folding Crank (Standard). e. Finish: [White (Standard)] [Desert Sand] [Chestnut Bronze] [Polished Brass] [Antique Brass] [Brushed Chrome] [Oil-Rubbed Bronze]. f. Sash Limiter: [No Sash Limiter (Standard)] [Window Opening Control Device ASTM F2090 Compliant] [Permenant 4 inch (101.6mm) Limiter]. 3. Double-Hung: a. Balance: Dual helical steel spring. b. Lock: Cam Action. c. Finish: [White (Standard)] [Desert Sand] [Chestnut Bronze] [Polished Brass] [Antique Brass] [Brushed Chrome] [Oil-Rubbed Bronze]. d. Sash Limiter: [No Sash Limiter (Standard)]] [Window Opening Control Device ASTM F2090 Compliant]. 4. Fixed Windows: None. 5. Radius and Geometric Windows: None. I. Glazing for Windows: 1. Strength: [Annealed] (Standard)] [Annealed [Tempered (meets CA Urban Fire Code)] [Tempered In/Annealed Out (meets CA Urban Fire Code)]. 2. Insulated Glass: a. Two panes of glass utilizing a continuous roll formed stainless steel spacer and dual seal sealant. b. Overall Nominal Thickness: 5/8 inch (15 mm). 1) Sashed Picture Units: 5/8 inch (15 mm). 2) Direct Set Picture And Transoms: 3/4 inch (19 mm). c. Glass Coating: [As selected by Architect] [Low-E 366 (Standard)] [Low-E] [Low-E EC] [Low-E EC 366 (i89 In/366 Out)]. d. Glass Protection: [No Preserve (Standard)] [Preserve]. e. Air Space: [Argon filled (Standard)] [Air with capillary tubes]. J. Combination Storm/Screens: 1. Material: Extruded aluminum with twin storm panels and charcoal fiberglass screen cloth (18 by 16 mesh) set in painted extruded aluminum frame. 2. Frame Color: [Brilliant White (standard)] [Chestnut Bronze] [Hartford Green] [Dark Chocolate]. K. Interior Insect Screen: 1. Material: [Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in a painted roll formed aluminum frame (Standard)] [Charcoal fiberglass screen cloth (18 by16 mesh) set in painted roll formed aluminum frame] [Black UltraVue 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

20 fiberglass screen cloth (19 x 19 mesh) set in a painted roll formed aluminum frame]. 2. Frame Color: a. Color: [As selected by Architect] [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze [Black]. L. Grilles: 1. Type: Simulated Divided Lites (SDL) with Perm. Wood: Standard Sash Options a. Exterior Muntins: 1) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit. 2) Profiles: Bead stop profiles: (a) Profile Width: 7/8 inch (22 mm). 3) Finish: Match exterior cladding. b. Interior Shadow Bars: [Silver (Standard)] [Light Brown] [No] shadow bar. c. Interior Muntins: 1) Material: Clear pine permanently bonded to the interior of the insulating glass unit. 2) Profile: Beaded profile. 3) Width: Match exterior muntin. 4) Finish: Match interior finish. 2. Type: Simulated Divided Lites (SDL) with Perm. Wood: Traditional Sash Options. a. Exterior Muntins: 1) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit. 2) Profiles: Bead stop profiles: (a) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [1-3/8 inch (34.9 mm)] [2-5/16 inch (59 mm)]. 3) Profiles: Putty profiles: (a) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [5/8 inch (15.9 mm)]. 4) Finish: [As selected by Architect] [Brilliant White (Standard] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate]. b. Interior Shadow Bars: [Silver (Standard)] [Light Brown] [No] shadow bar. c. Interior Muntins: 1) Material: Clear pine permanently bonded to the interior of the insulating glass unit. 2) Profile: [Traditional Bead (Standard)] [Putty] profile. 3) Width: Match exterior muntin. 4) Finish: Match interior finish. 3. Type: Simulated Divided Lites (SDL) with Full Surround Wood Grilles: Traditional Sash Options. a. Exterior Muntins: 1) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit. 2) Profiles: Bead stop profiles: (a) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [1-3/8 inch (34.9 mm)]. 3) Finish: [As selected by Architect] [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate]. b. Interior Muntins: 1) Material: Removable clear pine frame with grilles that is positioned on the interior of the insulating glass unit. 2) Profile: Modified OGEE. 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

21 3) Width: Match exterior muntin. 4) Finish: Match interior finish. 4. Type: Full Surround Grilles: Standard Sash Options. a. Material: Unfinished clear pine. b. Profile: Modified OGEE. c. Width: 7/8 inch (22 mm). 5. Type: Full Surround Grilles: Traditional Sash Options. a. Material: Unfinished clear pine. b. Pattern: Modified OGEE. c. Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [1-3/8 inch (34.9 mm)]. 6. Type: KD Wood Grilles: a. Material: Unfinished clear pine. b. Pattern: Modified OGEE. c. Width: 7/8 inch (22 mm). 7. Type: Grilles Between the Glass (GBG): Standard Sash Options. a. Material: Made of roll formed aluminum suspended within the air cavity. b. Profile: Flat 5/8 inch (16mm). 1) Finish: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Black] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int]. c. Profile: Contour 23/32 inch (18mm). 1) Finish: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Black] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int] [White Ext/Chestnut Bronze Int] [Chestnut Bronze Ext/White Int] [White Ext/Black Int] [Black Ext/White Int] [White Ext/French Vanilla Int] [French Vanilla Ext/White Int] [White Ext/Mesa Red Int] [Mesa Red Ext/White Int] [White Ext/Arctic Silver Int] [Arctic Silver Ext/White Int] [White Ext/Dark Chocolate Int] [Dark Chocolate Ext/White Int]. 8. Type: Grilles Between the Glass (GBG): Traditional Sash Options. a. Material: Made of roll formed aluminum suspended within the air cavity. b. Profile: Flat 5/8 inch (16mm). 1) Finish: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Arctic Silver] [Dark Chocolate] [Black] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int]. c. Profile: Contour 23/32 inch (18mm). 1) Finish: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Arctic Silver] [Dark Chocolate] [Black] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int] [White Ext./Chestnut Bronze Int] [Chestnut Bronze Ext/White Int] [White Ext/Black Int] [Black Ext/White Int] [White Ext/French Vanilla Int] [French Vanilla Ext/White Int] [White Ext./Hartford Green Int] [Hartford Green Ext./White Int] [White Ext./Mesa Red Int] [Mesa Red Ext./White Int] [White Ext./Arctic Silver Int] [Arctic Silver Ext./White Int] [White Ext./Dark Chocolate Int] [Dark Chocolate Ext./White Int]. d. Profile: Contour 1 inch (25.4mm). 1) Finish: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Arctic Silver] [Dark Chocolate] [Black] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int]. 9. Type: Combination SDL: Traditional Sash Options. a. As specified by Architect. 2.4 ALUMINUM-CLAD WOOD PATIO DOOR ASSEMBLIES 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

22 A. Basis of Design: Aluminum-clad wood patio door assemblies as manufactured by JELD- WEN, Inc. 1. Patio Door Type: [Sliding patio doors] [Swinging patio doors]. B. Patio Door Fabrication: 1. Sliding Patio Doors: a. Frame: [Finger jointed wood construction. Corner joints reinforced with injection molded nylon corner key mechanically fastened and sealed with silicone] [Clear wood construction. Corner joints reinforced with injection molded nylon corner keys and mechanically fastened and sealed with silicone]. b. Panels: Corners machine clamped, joined with finger-joint-pur corners. c. Glass: Mounted using silicone glazing compound on exterior and retainer held bead on interior. d. Cladding: inch (0.8 mm) roll form, aluminum corners are jointed and sealed. 2. Swinging Patio Doors: a. Frame: [Finger jointed wood construction (Standard)] [Clear wood construction]. b. Panels: Corners machine clamped. c. Glass: Mounted using silicone glazing compound on exterior and retainer held bead on interior. d. Cladding: Aluminum corners are jointed and sealed. C. Frames: 1. Sliding Patio Doors: a. Material: Select kiln-dried pine AuraLast treated wood. b. Jamb Width: 4-9/16 inches (116 mm). c. Cladding inch (1.27 mm) extruded aluminum. 2. Swinging Patio Doors: a. Material: Select kiln-dried pine AuraLast treated wood. b. Jamb Width: 4-9/16 inches (116 mm). c. Cladding inch (1.27 mm) extruded aluminum. D. Sliding Door Panels: 1. Materials: Select kiln-dried pine AuraLast treated wood and engineered wood substrate. Select members have a LVL core. 2. Cladding: inch to inch (1.4 mm to 2.5 mm) extruded aluminum, finish to match exterior finish. 3. Thickness: 1-3/4 inches (44.5 mm). 4. Layout: 3-11/32 inches (85 mm) stiles and rails face width. E. Swinging Door Panels: 1. Materials: Select kiln-dried pine AuraLast treated wood and engineered wood substrate. Select members have a fingerjointed core. 2. Cladding: inch to inch (1.39 mm to 1.6 mm) extruded aluminum, finish to match exterior finish. 3. Thickness: 1-3/4 inches (44.5 mm). 4. Layout: [French Door, Entry and Sidelite 4 3/4 inch (120.7 mm) stiles and rails] [2-Panel Center Hinged 4 3/4 inch (120.7 mm) stiles at jambs, 2 1/4 inch (57.2 mm) stiles at mull post, 4 3/4 top and bottom rails]. F. Exterior Trim: 1. Sliding Patio Door a. Nail Fin: [Nail Fin (Standard)] [No Drip Cap/No Nail Fin]. b. Casing: [1-5/8 inches (41 mm) brickmould (Standard)] [3-1/2 inches (88.9 mm) Flat Casing] [Adams Casing]. c. Frame Expanders: [1-7/8 inches (48 mm)] [3-1/4 inches (83mm)]. 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

23 d. Mull Expanders: 2-1/8 inches (54 mm). 2. Swinging Patio Door a. Nail Fin: [Nail Fin (Standard)] [No Drip Cap/Nail Fin] [Vinyl Drip Cap & Nail Fin Loose]. b. Casing: None. G. Extension Jambs: 1. Sliding Patio Doors a. Applied at head and sides of frame interior in wall depths up to 12 inches. 2. Swinging Patio Doors a. Applied at head and sides of frame interior in wall depths up to 12 inches. H. Weatherstripping: 1. Sliding Patio Doors: a. Head: Ivory colored rigid vinyl parting stop with pile weatherstripping and aluminum track at operating head. b. Meeting Stiles: Ivory colored fiberglass interlock sealed with dense pile weatherstripping. c. Side Jambs: Ivory colored rigid vinyl parting stop with pile weatherstripping. d. Sill: Pile weatherstripping. 2. Swinging Patio Doors: a. Head: Foam filled leaf weatherstrip in jamb. b. Mull Jamb: Double leaf weatherstrip. c. Stationary Panel Jambs: Foam filled leaf. d. Active Panel: High Performance leaf/bulb weatherstrip. e. Sill: Sweep with flexible wand weatherstrip at bottom of panels. I. Hardware: 1. Sliding Patio Doors a. Sliding System: Two sets of adjustable steel single steel ball bearing rollers. b. Locks: Dual point. c. Handle Set: Olympus Handle (Standard). 1) Handle Set Finish: [As selected by Architect] [Powdered White (Standard)] [Polished Brass] [Brushed Chrome] [Oil-Rubbed Bronze] [Black Powder Coat Black] [PVD Satin Nickel]. 2) Key Option: [No Key (Standard)] [Keyed] [Keyed Alike]. 3) Strike Plate Finish: Anodized Aluminum. d. Handle Set: Legacy Handle 1) Handle Set Finish: [As selected by Architect] [Oil-Rubbed Bronze (Standard)] [Satin Nickel]. 2) Key Option: [No Key (Standard)] [Keyed] [Keyed Alike]. 3) Strike Plate Finish: Anodized Aluminum. e. Handle Set: None. f. Sill Finish: Black. 2. Swinging Patio Doors a. Locks: Standard, single point mortise with lever handle with lever handle and thumb turn dead bolt. b. Hinges: Non-Adjustable (Standard). 1) Hinge Finish: [As selected by Architect] [Polished Brass (Standard)] [Antique Brass]. c. Hinges: Adjustable 1) Hinge Finish: [As selected by Architect] [Polished Brass (Standard)] [Antique Brass] [Satin Nickel] [Bronze] [Painted Silver]. d. Handle Set: Lido 1) Handle Set Finish: [Brass (Standard] [Antique Brass]. e. Sill: [Grey Anodized Aluminum Sill (standard)] [Bronze Sill]. J. Glazing for Patio Doors: 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

24 1. Sliding Patio Doors a. Strength: Tempered glass. b. Glazing Type: Insulated glass. 1) Description: Two panes of glass utilizing continuous roll formed stainless steel spacer and dual seal sealants. 2) Overall Nominal Thickness: 3/4 inch (19 mm). 3) Glass Coating: [As selected by Architect] [Low-E 366 (Standard)] [Low-E] [Low-E 180] [Low-E EC] [Low-E EC 366 (i89 In/366 Out)]. 4) Glass Protection: [No Preserve (Standard)] [Preserve]. 5) Air Space: [Argon-filled airspace (Standard)] [Air-filled airspace with capillary tubes]. c. Glazing Type: Blinds Between the Glass. 1) Description: White Internal Blinds (Tilt and Raise). 2) Glass Coating: None. 3) Glass Protection: None. 4) Air Space: [None (Standard)] [Air-filled airspace with capillary tubes]. 2. Swinging Patio Doors a. Strength: Tempered glass. b. Glazing Type: Insulated glass. 1) Description: Two panes of glass utilizing continuous roll formed stainless steel spacer and dual seal sealants. 2) Overall Nominal Thickness: 3/4 inch (19 mm). 3) Glass Coating: [As selected by Architect] [Low-E 366 Tempered (Standard)] [Low-E Tempered] [Low-E EC Tempered] [Low-E 366 EC Tempered]. 4) Glass Protection: Plastic preserve film on interior and exterior of glass. c. Air Space: [Argon-filled airspace (Standard)] [Air-filled airspace with capillary tubes]. K. Exterior Sliding Insect Screens: 1. Screen Type: Bottom Rolling Extruded Screen a. Material: Charcoal fiberglass mesh screen cloth (18 by 16 mesh) set in extruded aluminum frame with adjustable steel rollers. b. Frame Color: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate]. 2. Screen Type: Heavy Duty Top Hanging Screen a. Material: Charcoal fiberglass mesh screen cloth (18 by 16 mesh) set in. extruded aluminum frame with adjustable steel rollers. b. Frame Color: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate]. 3. Heavy Duty Bottom Rolling Extruded a. Material: Charcoal fiberglass mesh screen cloth (18 by 16 mesh) set in extruded aluminum frame with adjustable steel rollers. b. Frame Color: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate]. L. Swinging Screens: 1. Material: Fiberglass, screen cloth (18 by 16 mesh) set in extruded aluminum frame. a. Frame Color: [As selected by Architect] [White (Standard] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red]. 2. Material: Aluminum Silver screen cloth (18 by 16 mesh) set in extruded aluminum frame. 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

25 a. Frame Color: [As selected by Architect] [White] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red]. 3. Material: Aluminum Charcoal screen cloth (18 by 16 mesh) set in extruded aluminum frame. a. Frame Color: [As selected by Architect] [White] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red]. M. Grilles: 1. Sliding Patio Doors a. Simulated Divided Lites (SDL) with Perm. Wood: 1) Exterior Muntins: (a) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit. (b) Profiles: Bead stop profiles: (1) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [1-3/8 inch (34.9 mm)] [2-5/16 inch (59 mm)]. (c) Profiles: Putty profiles: (1) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] (d) [5/8 inch (15.9 mm)]. Finish: [As selected by Architect] [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate]. 2) Interior Shadow Bars: [Silver (Standard)] [Light Brown] [No] shadow bar. 3) Interior Muntins: (a) Material: Clear pine permanently bonded to the interior of the insulating glass unit. (b) Profile: [Traditional Bead] [Putty] profile. (c) Profile Width: Match exterior muntin. (d) Finish: Match interior finish. b. Full Surround Grilles: 1) Material: Unfinished clear pine. 2) Pattern: Modified OGEE. 3) Width: 7/8 inch (22 mm). c. Grilles Between the Glass (GBG): 1) Material: Made of roll formed aluminum suspended within the air cavity. 2) Profile: Flat 5/8 inch (16mm). (a) Finish: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Arctic Silver] [Dark Chocolate] [Black] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int]. 3) Profile: Contour 23/32 inch (18mm). (a) Finish: [Brilliant White (Standard)] [Desert Sand] [Chestnut Bronze] [French Vanilla] [Hartford Green] [Mesa Red] [Arctic Silver] [Dark Chocolate] [Black] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int] [White Ext/Chestnut Bronze Int] [Chestnut Bronze Ext/White Int] [White Ext/Black Int] [Black Ext/White Int] [White Ext/French Vanilla Int] [French Vanilla Ext/White Int] [White Ext/Hartford Green Int] [Hartford Green Ext/White Int] [White Ext./Mesa Red Int] [Mesa Red Ext/White Int] [White Ext/Arctic Silver Int] [Arctic Silver Ext/White Int] [White Ext/Dark Chocolate Int] [Dark Chocolate Ext/White Int]. 2. Swinging Patio Doors a. Simulated Divided Lites (SDL) with Perm. Wood: 1) Exterior Muntins: 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

26 (a) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit. (b) Profiles: Bead stop profiles: (1) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [1-3/8 inch (34.9 mm)]. (c) Profiles: Putty profiles: (1) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)]. (d) Finish: [As selected by Architect] [Brilliant White (Standard)] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Hartford Green] [Mesa Red]. (e) Interior Shadow Bars: [Silver (Standard)] [Light Brown] shadow bar. (f) Interior Muntins: (1) Material: Clear pine permanently bonded to the interior of the insulating glass unit. (2) Profile: Match exterior profile. (3) Width: Match exterior muntin. (4) Finish: Match interior finish. b. Simulated Divided Lites (SDL) with Full Surround Wood: 1) Exterior Muntins: (a) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit. (b) Profiles: Bead stop profiles: (1) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [1-3/8 inch (34.9 mm)]. (c) Finish: [As selected by Architect] [Brilliant White (Standard)] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Hartford Green] [Mesa Red]. (d) Interior Muntins: (1) Material: Clear pine permanently bonded to the interior of the insulating glass unit. (2) Profile: Modified OGEE. (3) Width: Match exterior muntin. (4) Finish: Match interior finish. c. Full Surround Grilles: 1) Material: Unfinished clear pine. 2) Pattern: Modified OGEE. 3) Profile Width: [7/8 inch (22 mm)] [1-1/8 inch (28.5 mm)] [1-3/8 inch (34.9 mm)]. d. Grilles Between the Glass (GBG): 1) Material: Made of roll formed aluminum suspended within the air cavity. 2) Profile: Flat 5/8 inch (16 mm). (a) Finish: [As selected by Architect] [Brilliant White (Standard)] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int]. 3) Profile: Contour 23/32 inch (18mm). (a) Finish: [As selected by Architect] [Brilliant White (Standard)] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int] [White Ext/Chestnut Bronze Int] [Chestnut Bronze Ext/White Int] [French Vanilla Ext/White Int] [White Ext/Hartford Green Int] [Hartford Green Ext/White Int] [White Ext/Mesa Red Int] [Mesa Red Ext/White Int] [White Ext/Arctic Silver Int] [White Ext/Dark Chocolate Int]. 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

27 PART 3 EXECUTION 3.1 EXAMINATION AND PREPARATION 4) Profile: Contour 1 inch (25.4 mm). (a) Finish: [As selected by Architect] [Brilliant White (Standard)] [Chestnut Bronze] [Desert Sand] [French Vanilla] [Hartford Green] [Mesa Red] [Black] [Arctic Silver] [Dark Chocolate] [White Ext/Desert Sand Int] [Desert Sand Ext/White Int]. A. Inspect and prepare openings and substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions. 1. Inspect assembly components prior to installation. 2. Verify rough opening conditions are within recommended tolerances. 3. Form sheet metal sill pan in accordance with manufacturer's recommendations. 4. Prepare assembly components for installation in accordance with manufacturer's recommendations. B. Do not proceed with installation until openings and substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions. C. If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions. 3.2 INSTALLATION A. Install assemblies in accordance with manufacturer's installation guidelines and recommendations including the following. B. Installation of Windows With Nailing Fins: Insert windows into rough opening. 1. Shim side jambs straight. 2. Inspect window for square, level and plumb. 3. Fasten window through nailing fins around entire window. 4. Test and adjust for smooth operation of window. 5. Set all nails below wood surface. C. Installation of Patio Doors With Nailing Fins: Insert patio doors into rough opening. 1. Shim side jambs straight. 2. Inspect patio door for square, level and plumb. 3. Fasten patio door through nailing fins around entire patio door. 4. Test and adjust for smooth operation of patio door. 3.3 FIELD QUALITY CONTROL A. Manufacturers' Field Services: Perform field inspections as recommended by manufacturer. 3.4 CLEANING AND PROTECTION A. Clean the exterior surface and glass with mild soap and water. B. Protect installed windows from damage. C. Remove and dispose of protective film from glass; touch-up, repair or replace damaged components and assemblies before Substantial Completion. END OF SECTION 4/8/2018 JELD-WEN W-2500 Aluminum-Clad Wood Windows and Patio Doors

28 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG TABLE OF CONTENTS Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. 1

29 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG GENERAL INFORMATION W-2500 with Traditional Sash Clad Double-Hung windows feature fully operating upper and lower sash. Counterbalancing is achieved with helical spring extension systems hidden in weatherable PVC jambliners. Operating units are supplied with cam-type sash locks installed. There are several hardware finish options. Refer to the Specifications for available finish options. Multiple Assemblies W-2500 with Traditional Sash Clad Double-Hung windows may be mulled beside other clad double-hung or clad picture windows, or below clad transom windows, to fulfill a wide variety of needs. Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 2

30 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG LITE CUT INFORMATION W-2500 WITH TRADITIONAL SASH Clad Double-Hung windows are available with removable grilles in 7/8" Full surround or beaded SDL only, 5/8" flat or 23/32" contour grilles between the glass (GBG) and Simulated Divided Lites. Standard lite cuts are rectangular. Lite Cut Options Special lite cut patterns can include a wide variety of straight line and radius patterns. The illustrations shown here represent just a few of the possibilities. Rectangular, horizontal, vertical and Prairie lite patterns are available in all standard size clad double-hung windows. Uneven, diamond, radius and Gothic lite cuts are available, subject to approval. Approvals are based on the ability to fulfill the design requirement while maintaining the construction integrity of the finished product. Rectangular Vertical Prairie Uneven Diamond Bar Alignment Alignment of divided lite muntin bars from one window to the next is often required by fine architectural design. Wood grilles, GBG's, and Simulated Divided Lites may be specified with muntin bars aligned. Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 3

31 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG General Notes: Unit size is always the maximum size of the window with or without trim and does not include the nail fin. Masonry Opening: Masonry opening is always 1/2" over the outside of the trim of the window. UNIT SIZING Rough Opening: Rough opening is always 3/4" over frame size of the window. A B C Horizontal exterior trim offerings below are the same with or without sill nose. D F E Vertical exterior trim offerings with standard sill nose. Trim on 3 sides. Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 4

32 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG OPENING FORMULAS Clear Opening Formulas Vertical (Frame Height / 2) /16" Horizontal Frame Width - 3 9/16" Daylight Opening Formulas Vertical (Frame Height / 2) - 3 5/16" Horizontal Daylight Opening = (Frame Width /32") Daylight Opening Clear Opening Clear Opening Architectural Design Manual November 2017 Standard Sash Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 5

33 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG OPERATION & SASH TILTING Double-Hung Operation: When the sash are locked at the check rails the sash are closed and sealed in the sash opening of the frame. When the sash are unlocked the lower sash travels vertically to any position desired. The upper sash can also be positioned as desired. Sash Tilting for Washing The W-2500 WITH TRADITIONAL SASH Clad Double-Hung window will allow the sash to be tilted or removed for easy cleaning. Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 6

34 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG DIVIDED LITE OPTIONS Operating Grilles 1/8" 1/4" 1/8" 1/8" 5/8" 11/16" 5/8" 1/4" 5/8" Grille 23/32" Grille 7/8" SDL Picture Grilles 3/16" 3/16" 1/4" 3/16" 5/8" 11/16" 5/8" 1/4" 5/8" Grille 23/32" Grille 7/8" SDL Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 7

35 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG GLAZING OPTIONS 1/8" 5/8" 1/8" 5/8" 1/8" 5/8" 1/8" Double-Hung SS//SS Double-Hung DS//DS Double-Hung CA Urban Fire Code Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 8

36 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG JAMB EXTENDER & PREP FOR STOOL OPTIONS 9/16" 5/8" 4 3/4" 1 3/16" 9 5/16" 5 3/4" 4 9/16" 4 9/16" 5 3/4" Wall 4/4 (21/32") Jamb Thickness (Option) 9 5/16" Wall Max 1-PC Jamb Extender 9/16" 1 1/4" 4 3/4" Stool 10 9/16" 4 9/16" Prep for Stool Apron Sill Support 10 9/16" Wall Max Wall Depth Note: Stool, apron, and sill support are applied by trim carpenter after window is installed and are not provided by JELD-WEN. Unit is shipped without sill jamb extenders. Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 9

37 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG TRIM & SILL NOSE OPTIONS 1 1/2" 1 1/4" 1 1/2" Standard 1 5/16" Brickmould 1 3/4" 3" 3" 3 1/2" Flat Casing Adams Casing Sill Nose Options 1/2" 1" 1 1/16" 2 1/8" 1 3/4" 2 1/4" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 3" = 1' - 0" 10

38 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG MULLION OPTIONS 6 3/8" 2 1/2" 7/8" 3 3/8" 7 9/16" Operating Double-Hung With In-Sash Picture/Transom 1 3/8" Twin Operating Double-Hung 6 1/8" 2 1/2" 6 1/4" 2 1/2" 1 3/8" In-Sash Picture/Transom Beside In-Sash Picture/Transom 1 3/8" Operating Double-Hung Beside In-Sash Picture/Transom Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 3" = 1' - 0" 11

39 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG MIN-MAX SIZING 76" 36" 21 3/8" 41 3/8" Minimum Configuration Maximum Configuration Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 12

40 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG OPERATOR - VERTICAL SECTION 5 13/16" 1 1/4" 4 9/16" 3/8" 15/16" 2 9/16" Screen Size 1 1/4" Daylight Opening Sash Size Sash Size Daylight Opening 1 1/4" Frame Size Rough Opening 2 9/16" 1 5/8" 5/8" 3/8" 5 13/16" 4 9/16" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 13

41 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG OPERATOR - HORIZONTAL SECTION Rough Opening 3/8" Frame Size 3/8" 1 7/16" Sash Size 1 7/16" 1 3/4" Daylight Opening 1 3/4" 4 9/16" 5 13/16" 4 9/16" 5 13/16" 1 1/4" 1 3/4" Daylight Opening 1 3/4" 1 1/4" 1/2" Sash Size 1/2" 15/16" Screen Size 15/16" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 14

42 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG PICTURE - VERTICAL SECTION 5 13/16" 1 1/4" 4 9/16" 3/4" 3/4" 2 9/16" Unit Size Daylight Opening Sash Size Frame Size Rough Opening 2 9/16" 1 9/16" 1 1/4" 4 9/16" 5 13/16" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 15

43 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG PICTURE - HORIZONTAL SECTION Rough Opening 3/8" Frame Size 3/8" 7/8" Sash Size 7/8" 2 5/16" Daylight Opening 2 5/16" 4 9/16" 4 9/16" 5 13/16" 5 13/16" 1 1/4" 1 1/4" Unit Size Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 16

44 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG POCKET OPERATOR - VERTICAL SECTION 4 9/16" 3 1/4" 1 5/16" 2 5/8" 1/4" 3/8" 7/16" 2 1/8" Screen Size Daylight Opening Sash Size Sash Size Daylight Opening 1 1/4" 1 1/4" Frame Size Pocket Opening 2 9/16" 3/8" 1/2" 2 15/16" 1 5/8" 4 9/16" 13/16" 13/16" 1/4" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 17

45 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG POCKET OPERATOR - HORIZONTAL SECTION Pocket Opening 1/4" Frame Size 1/4" 3/8" 3/8" 3 1/4" 2 7/8" 4 9/16" 3 1/4" 2 7/8" 4 9/16" 1 5/16" 1 5/16" 1 11/16" Daylight Opening 1 11/16" 1/4" 13/16" Sash Size Screen Size 1/4" 13/16" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 18

46 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG POCKET PICTURE - VERTICAL SECTION 4 9/16" 1 5/16" 3 1/4" 2 5/8" 1/4" 3/4" 2 5/8" Daylight Opening Sash Size Frame Size Pocket Opening 2 9/16" 13/16" 1/2" 13/16" 1/4" 2 15/16" 1 5/8" 4 9/16" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 19

47 W-2500 WITH TRADITIONAL SASH CLAD-WOOD WINDOW DOUBLE-HUNG POCKET PICTURE - HORIZONTAL SECTION Pocket Opening 1/4" Frame Size 1/4" 7/8" Sash Size 2 5/16" Daylight Opening 2 5/16" 7/8" 4 9/16" 2 5/8" 3 1/4" 5/8" 2 5/8" 3 1/4" 5/8" 4 9/16" 1 5/16" 1 5/16" Architectural Design Manual November 2017 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 20

48 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING TABLE OF CONTENTS Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. 1

49 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING MULLION OPTIONS 2 11/16" 1 1/16" 1/2" 1 1/16" 3 1/8" 15/16" 2 7/8" 2 7/8" 1 9/16" 2" Slider / Slider 1/2" Clip Slider / Slider 15/16" Clip 3 5/16" 3 11/16" 1 1/16" 1 9/16" 1 1/16" 1 9/16" 3 1/16" 3 1/16" 2 9/16" 2 9/16" 1 1/16" Slider / Tilt Single Hung 1 9/16" Clip 4 5/8" 2 7/16" Slider / Slider 1 9/16" Clip 2 7/8" 1 9/16" 7/16" 2 7/8" 15/16" 2 9/16" 4 7/8" 1 1/8" 1 1/16" 3 1/2" Slider / Slider 2 7/16" Clip 1 1/4" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Transom / Slider Scale: 6" = 1' - 0" 2

50 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING DIVIDED LITE OPTIONS 1/8" 1/8" 1/8" 7/8" 1" 1" 7/8" Low Profile Contour SDL 1" Raised Slim SDL 1" Raised Slim SDL w/ Shadowbar 3/16" 3/16" 3/16" 5/8" 7/8" 5/8" 5/8" Flat GBG 7/8" Flat GBG 5/8" Contour GBG Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 3

51 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING TRIM OPTIONS 3 1/4" 3/8" 3 1/4" 2 7/8" 3/8" 2 7/8" 2 1/8" 1 5/8" 2 3/4" 2 1/4" 7/8" 7/8" 1 5/8" Flush Fin 2 1/4" Flush Fin 2 7/8" 1 5/16" 1 5/8" 7/8" 1/2" 2 7/8" 2 7/8" 3 7/16" 7/8" 1 1/8" 1 1/16" Florida Flange Flat Casing Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 4

52 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING GRILLE PATTERNS Standard Prairie Frame Prairie Glass Colonial Top Down Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 5

53 Clear Opening Height BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING CLEAR OPENING LAYOUT Clear Opening Width Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 6

54 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING STANDARD UNIT - VERTICAL SECTION 2 7/8" 1 1/8" 1 5/16" 1 5/8" 1/4" 1 3/8" 1 5/16" 1 1/4" Daylight Opening Daylight Opening Frame Size Rough Opening 1 1/4" 1 3/8" 1 5/16" 1 1/8" 1 5/16" 1 5/8" 1/4" 2 7/8" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 7

55 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING STANDARD UNIT - HORIZONTAL SECTION Rough Opening 1/4" Frame Size 1 5/8" Daylight Opening 1 1/4" 1/4" 1 5/16" 2 7/8" 1 5/8" 1 5/8" 2 7/8" 1 5/16" 1 5/16" 1 3/8" Daylight Opening 1 11/16" 1 3/8" 1 1/8" 1 1/8" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 8

56 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING 3-WIDE UNIT (XOX) - HORIZONTAL SECTION Rough Opening 1/4" 2 1/2" Daylight Opening 1 5/8" Frame Size Daylight Opening 1 5/8" 2 1/2" 1/4" 2 7/8" 1 5/8" 1 5/8" 2 7/8" 1 5/16" 1 5/16" 1 1/8" 1 3/8" Daylight 1 11/16" Opening 1 11/16" 1 3/8" 1 1/8" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 9

57 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING FLUSH FIN FRAME - VERTICAL SECTION 3 1/4" 3/8" 2 7/8" 1 5/8" 1/4" 3" 1 5/16" 1 1/4" Daylight Opening Daylight Opening Frame Size Rough Opening 1 1/4" 1 5/16" 3" 1 5/8" 1/4" 3/8" 2 7/8" 3 1/4" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 10

58 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING FLUSH FIN FRAME - HORIZONTAL SECTION Rough Opening 1/4" Frame Size 1/4" 1 1/4" Daylight 1 5/16" 1 5/8" 1 5/16" Opening 2 7/8" 3 1/4" 2 7/8" 3 1/4" 3/8" 3" Daylight Opening 1 11/16" 3" 3/8" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 11

59 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING FLUSH FIN FRAME 3-WIDE (XOX) - HORIZONTAL SECTION Rough Opening 1 5/8" 1/4" 2 1/2" Daylight Opening 1 5/8" Frame Size Daylight Opening 1 5/8" 2 1/2" 1/4" 1 5/8" 3 1/4" 2 7/8" 2 7/8" 3 1/4" 3/8" 3" 1 11/16" Daylight Opening 1 11/16" 3" 3/8" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: NTS 12

60 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING POCKET FRAME - VERTICAL SECTION 2 7/8" 1/4" 1 3/8" 1 5/16" 1 1/4" Daylight Opening Daylight Opening Frame Size Rough Opening 1 1/4" 1 3/8" 1 5/16" 2 7/8" 1/4" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 13

61 BUILDERS VINYL VINYL WINDOWS HORIZONTAL SLIDING POCKET FRAME - HORIZONTAL SECTION Rough Opening 1/4" Frame Size 1/4" 1 5/16" Daylight 1 5/8" 1 1/4" Opening 1 5/16" 2 7/8" 2 7/8" 1 3/8" Daylight Opening 1 11/16" 1 3/8" Architectural Design Manual January 2018 Product specifications may change without notice. Questions? Consult JELD-WEN customer service. Scale: 6" = 1' - 0" 14