The Australian Catalog Content is compiled by Cadsoft Australia, for any further information contact:

Transcription

1 The Australian Catalog Content is compiled by Cadsoft Australia, for any further information contact: Phone

2 Walls Internal Walls Catering for Pre Fab and Stick built construction. Also catering for internal lining, such as plasterboard and wet area board. Labour and supply are quantified in the estimating side of Envisioneer. Drawing templates can be used for pre fab or stick built to completely quantify the framing members. 90mm Cornice and skirting boards are on all walls. (NOTE: No engineering is supplied and all care but no responsibility is applied to this catalog. It is compiled to assist you the end user to move forward with Envisioneer as quickly as possible.)

3 Veneer Walls We have catered for face brick and rendered brick veneer walls. These also quantify internal linings, and framing. (NOTE: You can if necessary change the 70mm or 90mm to 75mm or 100mm depending on the framing specification you use in your area.) We have also added materials such as Boral and Austral bricks to the materials library.

4 Brickwork We have catered for cavity work for walls, and also for single skin brickwork that can be used in subfloor areas. Linea 150 We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client.

5 Linea 180 We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client. Chamfer We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client.

6 Heritage We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client. Newport We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client.

7 Summit We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client. Stria 325 We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client.

8 Stria 405 We have added all James Hardies horizontal weatherboards. The boards have been added as trim and look real and you can quantify the boards as well as colour them any colour you wish to impress your client. Hardiflex We have added all flat sheeting as well. We have catered for express joints by using members and columns to get any pattern you wish for your clients Matrix We have added all flat sheeting as well. We have catered for express joints by using members and columns to get any pattern you wish for your clients Axon 133

9 Axon 400 HardiTex There any many more walls but above are the bulk that are commonly used.

10 Doors External Doors Entrance Doors have been created to cover 70mm and 90mm walls. We have also catered for both 2040 and 2340 high doors. All doors will quantify door, jambs, furniture, hinges, stops etc. (NOTE: Remember you can change the 70mm and 90mm at your own desire.) Pivot Doors have been created to cover 70mm and 90mm walls. We have also catered for both 2040 and 2340 high doors. All doors will quantify door, jambs, furniture, hinges, stops etc. (NOTE: Remember you can change the 70mm and 90mm at your own desire.) French Doors have been created to cover 70mm and 90mm walls. We have also catered for both 2040 and 2340 high doors.

11 Laundry Doors have been created to cover 70mm and 90mm walls. Garage Doors have been created to cover 70mm and 90mm walls.

12 Patio Doors Sliding Glass Doors have been created to cover 70mm and 90mm walls. We have also catered for both 2100 and 2400 high doors. Bi Fold Doors have been created to cover 70mm and 90mm walls. We have also catered for both 2100 and 2400 high doors.

13 Garage Doors Roller Doors have been created to cover 70mm and 90mm walls. Panel Lift Doors have been created to cover 70mm and 90mm walls and also for 2440, 2590 and 2740 ceiling heights to reduce the head size over the door.

14 Internal Hinged Doors Prehung Passage Doors have been created to cover 70mm and 90mm walls and 2340 high doors. To cater for right hand, left hand and double. To cater for door furniture such as passage sets, privacy sets and dummy trims. Prehung Privacy Doors have been created to cover 70mm and 90mm walls and 2340 high doors. To cater for right hand, left hand and double. To cater for door furniture such as passage sets, privacy sets and dummy trims.

15 Prehung Dummy Trim Doors have been created to cover 70mm and 90mm walls and 2340 high doors. To cater for right hand, left hand and double. To cater for door furniture such as passage sets, privacy sets and dummy trims. Hinged Passage Set Doors have been created to cover 70mm and 90mm walls and 2340 high doors. To cater for door furniture such as passage sets, privacy sets and dummy trims.

16 Hinged Privacy Set Doors have been created to cover 70mm and 90mm walls and 2340 high doors. To cater for door furniture such as passage sets, privacy sets and dummy trims. Hinged Dummy Trim Doors have been created to cover 70mm and 90mm walls and 2340 high doors. To cater for door furniture such as passage sets, privacy sets and dummy trims.

17 Internal Sliding Doors Cavity Sliders Doors have been created to cover 70mm and 90mm walls and 2340 high doors.

18 Face Of Wall Sliders Doors have been created to cover 70mm and 90mm walls and 2340 high doors.

19 Vinyl Robe Sliders Doors have been created to cover 70mm and 90mm walls. In increments of 100mm Mirror Robe Sliders Doors have been created to cover 70mm and 90mm walls. In increments of 100mm

20 Bi Fold Doors have been created to cover 70mm and 90mm walls.

21 Windows Windows Windows have been created in two groups of each type. Revealed, for revels and architrave, the architrave will quantify. Square Set, for either block work or where you want to square set rather than have architrave, Window Groups Each window group expands out to window heights, and then each height expands out to all the widths of these windows we have allowed for in each group. You are able to modify or add additional sizes to cover specifications which may not be allowed in this catalog.

22 Sliding Fixed Double Hung Louvre Awning Casement

23 Colourbond Panels Glass Blocks Feature Louvres

24 Square Set Openings These opening also cater for quantities to set each corner. Openings

25 Floors The floors cover: Areas: This allows for labour costs. Concrete Slabs: In each class. Timber: Catering for the standard Yellow, red and Blue tongue sheets. Carpet and Vinyl Floor Tiles Timber Siteworks Floors

26 Roofs Roofs The roofs cover: Concrete Tiles Terra Cotta Tiles Colourbond Each group consists with settings for 450mm and 600mm soffits. All roofs are setup to quantify roof area and hip, ridge capping and valley gutters and fascia and gutter.

27 Railings Balustrade Privacy Battening Shelving We use rails to give us shelfs, we find it easier. Robes Pantry Linen Storage Broom Frieze Feature used under front portico.

28 Columns We use and cater columns for: Timber Posts SHS Posts Tie Down Rods Square Sets Brick Piers Etc. Columns

29 Members We use and cater members for: Framing Mouldings Roof members Plumbing Drainage Etc. Members

30 Footings We cater for: Strip Edge beam Internal beam (Note: We only have three, as there are many types depending on your engineer s details. So we find it easier to have the one item and once in place change the properties to match your engineers details to gain correct quantities.) Footings

31 Cabinets We cater for: Corner Cupboards Base units Drawer units Appliance cupboards Wall oven unit Pantry units Top cupboards Vanities Laundry units Cabinets

32 Appliances Appliances We cater for: Gas and Electric These items are quantified and where necessary have labour fitting content.

33 Plumbing Fixtures We have tried to cover fixtures that are Australian, refer to the image to see some examples. Plumbing Fixtures

34 Exterior Accessories Under eave tank Large water tank Cloths hoist Gas Bottle