NEVI Light modular formwork

Transcription

1 NEVI Light modular formwork // Heavy duty, versatile and easily handled without a crane // Table of content Features Advantages Solutions Basic components

2 // Features Innovative range of panels and accessories for all types of formwork geometries for walls and columns in building construction. Construction of different vertical structures using NEVI Lightweight, quality materials: manual or crane assembly. Guaranteed performance. Easily handled and heavy duty. High-quality materials for optimum balance between weight and strength. Galvanised or painted panel finish and 15mm-plywood or composite board shuttering face. Galvanised steel panels and plywood Wide range of panels: Height of panels: 2.7 m / 2.4 m / 1.2 m. Three fully compatible height-ranges, in vertical or horizontal position. Range of widths: 0.9 m / 0.6 m / 0.45 m / 0.3 m. Possibility of building sets every 15 cm by combining different panels. 2

3 Supports large concrete pressures: Maximum permissible pressure: For heights above 2.7 m: 60 kn/m 2. With 2.7 m panel: For walls under 2.7 m in height, hydrostatic pressure of 67.5 kn/m 2 (does not require concrete poring rate control). Maximum deflection: For 60 kn/m 2 : line 6, according to DIN Wide range of panels that reach all heights Quick-action clamp for joining panels and assembling formwork gangs. Rapid panel coupling with clamps Adjustable clamp for fastening panel profiles Clamp adjustment: allows compensation of up to 12 cm between panels The universal panel resolves different dimensions of columns: From 10 x 10 cm to 65 x 65 cm; it admits adjustment every 5 cm. And on larger section columns by means of two universal panels Panel heights: 2.7 m / 2.4 m / 1.2 m. Up to 60 kn/m 2 permissible concrete pressure. Panel joints with stopend hook and plate washer nut 15. Lateral holes and sliding elements every 5 cm in panels. Wooden filler between panels Construction of columns by means of universal panel Efficient wall construction 3

4 // Advantages Lightweight panels: Manual assembly and dismantling possible. Very versatile: panels with side holes for quick typical formwork solutions (bulkheads, corners, columns), together with universal panel. Robust panel with steel frame reinforced at the corners. High quality finishes, thanks to high-quality boards used. NEVI easily solves all kinds of geometries Rapid panel coupling with clamps. Safety elements easily incorporated into panels. Guaranteed safety. Accessories common to other ULMA wall and column formwork. Extensive possibilities with the universal panel Lifting of large assemblies Incorporated safety items 4

5 // Solutions 1 Climbing systems 2 Single-sided formwork supports 3 Columns 4 Pilaster º corners 6 Corners other than 90º 7 Bulkheads 8 T-wall intersection Fillers 10 Working brackets 8 11 Frontal handrail Straight wall formwork 9 7 Column formwork Column formwork with overlapping panels Rectangular compound column Column dimensions: min. 10 x 10 cm max. 65 x 65 cm 5

6 Climbing formwork Single-sided formwork Lateral formwork of beams and slab stop-ends Foundations and footings Polygonal walls Inclined walls Elevator shafts 6

7 Basic components kg kg kg PANELS Panel NEVI 2.7x0.9 (2.43 m 2 ) Panel NEVI 2.7x0.6 (1.62 m 2 ) Panel NEVI 2.7x0.45 (1.215 m 2 ) Panel NEVI 2.7x0.3( 0.81 m 2 ) Panel NEVI 2.4x0.9 (2.16 m 2 ) Panel NEVI 2.4x0.6 (1.44 m 2 ) Panel NEVI 2.4x0.45 (1.08 m 2 ) Panel NEVI 2.4x0.3 (0.72 m 2 ) Panel NEVI 1.2x0.9 (1.08 m 2 ) Panel NEVI 1.2x0.6 (0.72 m 2 ) Panel NEVI 1.2x0.45 (0.54 m 2 ) Panel NEVI 1.2x0.3 (0.36 m 2 ) NEVI inside corner 2.7 (1.62 m 2 ) NEVI inside corner 2.4 (1.44 m 2 ) NEVI inside corner 1.2 (0.72 m 2 ) Coating: galvanised or painted Shuttering face: phenolic or composite board NEVI outside corner NEVI outside corner NEVI outside corner NEVI hinged corner NEVI hinged corner NEVI hinged corner Push-pull prop light Push-pull prop light WORKING PLATFORMS NEVI post bracket Safety handrail post Safety handrail S-V NEVI clamp ORMA walkway bracket Coating: galvanised or painted Shuttering face: phenolic or composite board MEGALITE clamp Panel universal NEVI 2.7x Panel universal NEVI 2.4x Panel universal NEVI 1.2x NEVI lifting hook TYING ELEMENTS NEVI bulkhead hook PUSH-PULL PROPS Push-pull prop Push-pull prop Push-pull prop Push-pull prop Plate washer nut Coating: galvanised or painted Shuttering face: phenolic or composite board 7

8 ULMA C y E, S. Coop. Ps. Otadui, 3 - P.O Oñati, Spain T F FAL39 IMPORTANT: Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the purpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained in this document, and the data on stress and loads should be respected. ULMA s Technical Department must be consulted anytime that field changes alter our equipment installation drawings. The loads featured in this document, related to the basic elements of the product, are approximate. Our equipment is designed to work with accessories and elements made by our company only. Combining such equipment with other systems is not only dangerous but also voids any or all our warrantees. The company reserves the right to introduce any modifications deemed necessary for the technical development of the product. All rights reserved. Neither all nor part of this document may be reproduced or transmitted in any way by any electronic or mechanical procedure, including photocopy, magnetic recording or any other form of information storage or retrieval system without the written permission. Copyright by ULMA C y E, S. Coop