FREE-STANDING ALTILISSE

Transcription

1 FREE-STANDING ALTILISSE PRODUCT ADVANTAGES Made of aluminium Effective protection of te waterproofing membrane wit te ergonomic, rounded sape of te counterweigt and te front bumper. Te plastic covering of te counterweigt prevents any cracking of te concrete block Ease of installation: pre-assembled unit Stability of te system: te counterweigt, tat can be andled by one single person, includes an ergonomic andle, and assures te stability of te system Optimised storage: four locating pins ensure stacking and facilitate storage of te counterweigts Free circulation of te rainwater under te crossbar Tel : +33(0) Fax : +33(0) support@vertic.fr

2 EN NF E FREE-STANDING ALTILISSE Slope of roof <10 H=1.10m D=1.50m TWO POSITIONS FOR ONE SINGLE PRODUCT EASY STORAGE AND TRANSPORT => STRAIGHT: 5 to avoid parapet covers => BENT AT 20 : to adapt to arcitectural constraints, and make safety equipment less visible from te bottom of te building Delivered folded, te assembly is terefore optimized to facilitate transport and storage. Te bolted uprigt post will be installed in te desired position. Standard pallet 120x80cm To complete and armonize your existing installations, tis uprigt post can be supplied wit adjustable clamps. Top and middle rail In 36mm extruded aluminium. Supplied in 3m lengt, reduced at one end. Bent corner Can be fitted into te rails to ensure an aestetic continuity. Easy installation. AL-LISSE AL-ANG90 AL-EAA AL-ERF COMPONENTS ALTILISSE Articulated corner coupling Allows making corners from 70 to 180. Easily adjustable on site. Diametre and material are identical to te rail for an aestetic continuity. Fixed straigt coupling For assembling longitudinal sections of nonreduced rails and middle rails. Fits directly inside te top and middle rails. Assembly unit wit counterweigt Rail and uprigt made of aluminium. Concrete counter-weigt wit plastic covering. Folded to optimize storage. AL-A.EL AL-BOUCH End plug Discret ribbed plug for a perfect safety of te ends of top and middle rails. Aluminium plint Te railing must be fixed wit a plint if te parapet measures less tan 100mm (roofs) or 150mm (macines) in relation to te circulation area. End plugs and corners available. AL-PAL AL-EXTM Wall-mouting part Enables te mounting of rails on any wall. Fixed directly on te wall wit 2 fixings diameter 10mm maxi (not included). 7

3 ALTILISSE ON PARAPET Different coice of uprigt according to te type of mounting plate and te eigt of te parapet Parapet collar H * *NCZ Can be used in te case were a building as a periperal parapet wit a eigt of up to * = 1000 < H < 1100 mm (NF E85-015) H > 1100 mm (EN ISO ) *NCZ : Normal circulation zone (if tere is some gravel, take te measurements above te gravel) 50cm for roofs 60cm for macines Tel : +33(0) Fax : +33(0) support@vertic.fr

4 EN NF E ALTILISSE ON PARAPET ADJUSTABLE FIXING SYSTEM OF THE RAILS Te top and middle rails are maintained by a patented clamping mecanism. Possible adjustment of te middle rail on te uprigt to standardize te intervals depending te eigt of te parapet. INTERFACE FOR ISOLATED PARAPET Te RT2012 Termal Regulation usually requires isolating te parapets. According to tese requirements, a specific plate allows fixing te guardrail up to an insulating inner layer of 130mm. Complying wit te Professional recommandations of te CFSE (Frenc Waterproofing Committee). COMPONENTS ALTILISSE Extruded aluminium uprigt AL-A.M / AL-A.MC AL-LISSE Top and middle rail Delivered wit te fixing kit for top and middle rail pre-assembled. Allows te adjustment of te eigt of te middle rail on site. In 36mm extruded aluminium. Supplied in 3m lengt, reduced at one end. Interface for isolated parapet AL-A.IAI AL-EAA Articulated corner coupling Reinforced bracket, made of galvanized steel, to be used wit te side fixing plate. Allows making corners from 70 to 180. Easily adjustable on site. Diametre and material are identical to te rail for an aestetic continuity. Side mounting plate AL-A.SL AL-ANG90 Bent corner Used wen installing a guardrail against te parapet. Has a significant 70mm offset to make it compatible wit te existing parapet cover. Vertical mounting plate AL-A.SV AL-PAL Can be fitted into te rails to ensure an aestetic continuity. Easy installation. Aluminium plint Used wen installing a andrail on te parapet. Can be mounted on a metallic or concrete support. Possible adjustment of te verticality. Offset mounting plate AL-A.SD AL-EXTM Te railing must be fixed wit a plint if te parapet measures less tan 100mm (roofs) or 150mm (macines) in relation to te circulation area. End plugs and corners available. Wall-mouting part Installation on a concrete or metallic parapet, wit 2 fixings M10 or 1 fixing M12 (not supplied). Possible adjustment of te verticality. Enables te mounting of rails on any wall. Fixed directly on te wall wit 2 fixings diameter 10mm maxi (not included). 9

5 ALTILISSE ON STEEL DECK D ADAPTATION TO PITCH OF CORRUGATIONS Te distance «D» between te uprigts depends on te spacing «e» of te corrugations: => For e = 250mm : D = 1.5m => For e = 333mm : D = 1.332m Note: for buildings wit a periperal, orizontal parapet, te rail may not follow te orizontal line, since te system is mounted directly on te roof itself wic may ave a slope. e In tis case, coose te cranked uprigt option, wic is less visible. Tel : +33(0) Fax : +33(0) support@vertic.fr

6 EN NF E ALTILISSE ON STEEL DECK COMPATIBILITY Can be installed on all steel roofing, dry or sandwic panels, installed in accordance wit DTU SPECIAL EXTENSION ARM EASY OF INSTALLATION Te top and middle rail use an ingenious, patented clamping mecanism. Possible adjustment of te middle rail on te uprigt to standardize te intervals depending te eigt of te parapet. Te arm, fitted wit modular mounting plates, can be installed in eiter direction of te roof corrugations. In te standard version, tey can be fitted wit a distance between corrugations of 250 or 333 mm. MODULAR INSTALLATION Can be mounted on te support perpendicular or parallel to te corrugations. WATER TIGHTNESS OF THE ROOF Te watertigtness of te roof is guaranteed owing to EPDM seals and te use of 6 waterproof rivets. STANDARD HEIGHT Since tey are fitted directly on te pedestrian area. COMPONENTS ALTILISSE Top and middle rail AL-LISSE AL-EAA Articulated corner coupling In 36mm extruded aluminium. Supplied in 3m lengt, reduced at one end. Allows making corners from 70 to 180. Easily adjustable on site. Diametre and material are identical to te rail for an aestetic continuity. Bent corner Can be fitted into te rails to ensure an aestetic continuity. Easy installation. Straigt Assembly unit Pre-drilled bottom plates at 250 and 333mm intervals. Quickly installed, and strong assembly (6 rivets per uprigt). Delivered wit assembly kit of top and middle rail pre-assembled. Bent assembly unit Pre-drilled bottom plates at 250 and 333mm intervals. Quickly installed, and strong assembly (6 rivets per uprigt). Delivered wit assembly kit of top and middle rail pre-assembled. AL-ANG90 AL-A.EBD AL-A.EBC AL-PAL AL-ERF AL-BOUCH AL-EXTM Aluminium plint Te railing must be fixed wit a plint if te parapet measures less tan 100mm (roofs) or 150mm (macines) in relation to te circulation area. Fixed straigt coupling For assembling longitudinal sections of nonreduced rails and middle rails. Fits directly inside te top and middle rails. End plug Discret ribbed plug for te ends of top and middle rails. Wall-mouting part Enables te mounting of rails on any wall. Fixed directly on te wall wit 2 fixings diameter 10mm maxi (not included). 11

7 FOLDING ALTILISSE CAN BE FOLDED BY ONE SINGLE PERSON Tel : +33(0) Fax : +33(0) support@vertic.fr

8 EN NF E FOLDING ALTILISSE FOLDING STRAIGHT OR BENT GUARDRAIL AGAINST PARAPET FREE STANDING STRAIGHT OR CURVED GUARDRAIL mm mm COMPONENTS ALTILISSE Top and middle rail AL-LISSE AL-EAR Articulated corner coupling In 36mm extruded aluminium. Supplied in 3m lengt, reduced at one end. Allows making corners from 70 to 180. Easily adjustable on site. Includes a captive winged screw. Folding unit: Straigt, wit counterweigt Concrete counter-weigt. Front bumper made of galvanised steel wit EPDM protection. A single tool (n 10) is used for tigtening te counterweigt and te clamps. AL-A.ELDR AL-A.SLDR Straigt folding assembly unit Te plate as a significant 70mm offset to make it compatible wit te existing parapet cover. Te plate is fixed wit M10 fixings (not included). Folding unit: Bent, wit counterweigt Concrete counter-weigt. Front bumper made of galvanised steel wit EPDM protection. A single tool (n 10) is used for tigtening te counterweigt and te clamps. AL-A.ELCR AL-A.SLCR Bent folding assembly unit Te plate as a significant 70mm offset to make it compatible wit te existing parapet cover. Te plate is fixed wit M10 fixings (not included). 13

9 PARAPET COVERS PRODUCT ADVANTAGES ADJUSTABLE DRAINING SPLICE BAR System made of aluminium or lacquered steel Protection of te parapet against te infiltrations Invisible fixing Te splice bar, clipped on its support, can be adjusted to line up te parapet cover. Sliding and draining splice bar system Tel : +33(0) Fax : +33(0) support@vertic.fr