BARRIER BARRIER. quick installation. high quality collective side protection. ideal for escape routes. pleasing, unobtrusively design

Transcription

1 BARRIER Guardrail systems EN The BARRIER fall protection system from provides many varied application options in collective side protection, because it has been designed in such a way that it can be optimally adapted to individual construction conditions. The uncomplicated, quick installation and the option of mounting without roof penetration make the product into a flexible all-rounder, which fits in to the aesthetics of buildings in an extremely pleasing way. The high quality railings are manufactured from weather-resistant aluminium and meet the most demanding architectural requirements due to an adjustable inclination. high quality collective side protection ideal for escape routes non roof-penetrating, fold away version height- and inclination adjustable less applied load due to the higher post distance of 2.2 m universally extendable with door element, toe board or corner tie (325 adjustable) quick installation pleasing, unobtrusively design plastic coated deadweight with integrated carrying handles to the latest state of the art certification: EN 13374:2013 EN ISO :2014 DIN :2007 NF E :2008 Version

2 SYSTEM-VARIO for a detailed view, see right The VARIO self-supporting side protection system from, held in place by deadweight loads, can be installed quickly, and is characterised in particular by a height adjustability of 125 mm. The system can be inclined up to 75, whereby the system fits outstandingly into the constructional circumstances. BARRIER-F22 TOE BOARD BRACKET for fastening the toe board to the vario BARRIER-V12 foot unit, stainless steel (AISI 304) for fastening the BARRIER-F20 toe board to the VARIO BARRIER-V12 foot unit SYSTEM VARIANTS BARRIER-VARIO SIDE PROTECTION SYSTEM held by deadweight load, stainless steel (AISI 304) Mountable on: flat roofs (max. 10 pitch) System pitch (preassembled): 90, 75 Without roof perforation parapet of at least 50 mm required! Preassembled bracket with post, plastic-encased concrete counterweight (c. 25 kg) with carrying handles! BARRIER-F23 TOE BOARD CONNECTION SET, stainless steel (AISI 304) for connecting two BARRIER-F20 toe boards BARRIER-R11 ALUMINIUM PIPE, straight Diameter x wall thickness x length: 36 x 2.5 x 3000 mm COMPONENTS BARRIER-Z11 RATING PLATE for BARRIER (EN / EN ISO / DIN / NF E ) BARRIER-R21 LINEAR TIE, stainless steel (AISI 304) for connecting two rail pipes BARRIER-R11 BARRIER-R30 CORNER TIE, plastic BARRIER-F20 TOE BOARD Height x width x length: 170 x 20 x 3000 mm suitable for BARRIER-S11/S12 post and VARIO BARRIER-V12 foot unit For use when no parapet higher than 150mm is available! for creating a corner of 2 rail pipes BARRIER-R11 BARRIER-R40 WALL TIE, plastic Version

3 DIMENSIONS for product description, see BARRIER-R50 END SEAL, plastic end seal of two rail pipes BARRIER-R11 Projection of the rail pipe max. 500 mm! BARRIER-R91 END CAP for BARRIER-R11 Diameter x thickness: 36 x 2 mm Packaging unit: 2 pieces Material: plastic end cap for rail pipe BARRIER-R11 Projection of the rail pipe max. 350 mm! BARRIER-V10 VARIO-WEIGHT Height x width x length: 122 x 395 x 395 mm Weight: 25 kg Material: plastic, concrete plastic coated concrete weight for foot unit BARRIER-V12 BARRIER-V12 VARIO-FOOT UNIT, stainless steel (AISI 304) VARIO foot unit without boom/post, for creation of a load-bearing collective side protection BARRIER-S POST, system VARIO, straight, fastened Length: 1080 mm BARRIER-V91 VARIO-CORNER TIE Material: stainless steel (AISI 304) BARRIER-S BOOM Length: 1150 mm for rectangular connection of two brackets of BARRIER-S12 standard length for VARIO system, escape route as per plans BARRIER-T20 DOOR SET opening selectable up to 800 mm max. For load-bearing implementation, 2 x BARRIER-V10 weights required for each door side! Version

4 SYSTEM-SKYLIGHT for a detailed view, see right The skylight guard from is the ideal protection for skylights and complete strip lights. Installation takes place without roof penetration and provides optimum protection without any negative effect on the entry of sunlight. BARRIER-R11 ALUMINIUM PIPE, straight Diameter x wall thickness x length: 36 x 2.5 x 3000 mm SYSTEM VARIANTS BARRIER-VARIO SIDE PROTECTION SYSTEM held by deadweight load Mountable on: flat roofs (max. 10 pitch), stainless steel (AISI 304) System pitch (preassembled): 90, 75 BARRIER-R21 LINEAR TIE, stainless steel (AISI 304) for connecting two rail pipes BARRIER-R11 BARRIER-R30 CORNER TIE, plastic for creating a corner of 2 rail pipes BARRIER-R11 COMPONENTS BARRIER-Z11 RATING PLATE for BARRIER (EN / EN ISO / DIN / NF E ) BARRIER-S POST, system VARIO, straight, fastened Length: 1080 mm Version

5 DIMENSIONS 2350 = = = = = = for product description, see BARRIER-S BOOM Length: 1150 mm standard length for VARIO system, escape route as per plans BARRIER-V10 VARIO-WEIGHT Height x width x length: 122 x 395 x 395 mm Weight: 25 kg Material: plastic, concrete plastic coated concrete weight for foot unit BARRIER-V12 BARRIER-T20 DOOR SET opening selectable up to 800 mm max. For load-bearing implementation, 2 x BARRIER-V10 weights required for each door side! BARRIER-V12 VARIO-FOOT UNIT, stainless steel (AISI 304) VARIO foot unit without boom/post, for creation of a load-bearing collective side protection BARRIER-T23 SIDE BAR Length x width x height:565 x 45 x 25 mm side bar for BARRIER-R11 pipe Projection of pipe max. 500 mm! BARRIER-V81 VARIO-ADAPTER FOOT Application: creation of a skylight fencing of max x 2000 mm, stainless steel (AISI 304) for fastening the post BARRIER-S13 to a VARIO-weight BARRIER-V10 Version

6 ESCAPE ROUTE SYSTEM-VARIO for a detailed view, see right The SYSTEM-VARIO escape route from is installed without roof penetration, and can be held in place by deadweight load or by concrete slabs. The width of this flexible system can be variably adjusted this makes it possible for people to move on the escape route completely freely and without any further protection. A larger distance between the posts fulfils the prerequisite for a much more economical use of material! COMPONENTS BARRIER-Z11 RATING PLATE for BARRIER (EN / EN ISO / DIN / NF E ) BARRIER-F23 TOE BOARD CONNECTION SET, stainless steel (AISI 304) for connecting two BARRIER-F20 toe boards BARRIER-R11 ALUMINIUM PIPE, straight Diameter x wall thickness x length: 36 x 2.5 x 3000 mm BARRIER-F20 TOE BOARD Height x width x length: 170 x 20 x 3000 mm suitable for BARRIER-S11/S12 post and VARIO BARRIER-V12 foot unit For use when no parapet higher than 150mm is available! BARRIER-R21 LINEAR TIE, stainless steel (AISI 304) for connecting two rail pipes BARRIER-R11 BARRIER-R30 CORNER TIE, plastic for creating a corner of 2 rail pipes BARRIER-R11 BARRIER-F22 TOE BOARD BRACKET for fastening the toe board to the vario BARRIER-V12 foot unit, stainless steel (AISI 304) for fastening the BARRIER-F20 toe board to the VARIO BARRIER-V12 foot unit BARRIER-R40 WALL TIE, plastic Version

7 DIMENSIONS 400 B= B= for product description, see BARRIER-R50 END SEAL, plastic end seal of two rail pipes BARRIER-R11 Projection of the rail pipe max. 500 mm! BARRIER-R91 END CAP for BARRIER-R11 Diameter x thickness: 36 x 2 mm Packaging unit: 2 pieces Material: plastic end cap for rail pipe BARRIER-R11 Projection of the rail pipe max. 350 mm! BARRIER-S POST, System VARIO, straight, fastened Length: 1080 mm BARRIER-T20 DOOR SET opening selectable up to 800 mm max. For load-bearing implementation, 2 x BARRIER-V10 weights required for each door side! BARRIER-V10 VARIO-WEIGHT Height x width x length: 122 x 395 x 395 mm Weight: 25 kg Material: plastic, concrete plastic coated concrete weight for foot unit BARRIER-V12 BARRIER-V12 VARIO-FOOT UNIT, stainless steel (AISI 304) VARIO foot unit without boom/post, for creation of a load-bearing collective side protection BARRIER-S BOOM Length: 1150 mm standard length for VARIO system, escape route as per plans BARRIER-V91 VARIO-CORNER TIE Material: stainless steel (AISI 304) for rectangular connection of two brackets of BARRIER-S12 Version

8 ESCAPE ROUTE SYSTEM USING CONCRETE SLABS for a detailed view, see right The escape route system from, using concrete slabs, is held in place by its own weight, and installed without roof penetration. The width of this flexible system can be variably adjusted this makes it possible for people to move on the escape route completely freely and without any further protection. A larger distance between the posts fulfils the prerequisite for a much more economical use of material! BARRIER-F23 TOE BOARD CONNECTION SET, stainless steel (AISI 304) for connecting two BARRIER-F20 toe boards COMPONENTS BARRIER-Z11 RATING PLATE for BARRIER (EN / EN ISO / DIN / NF E ) BARRIER-R11 ALUMINIUM PIPE, straight Diameter x wall thickness x length: 36 x 2.5 x 3000 mm BARRIER-F20 TOE BOARD Height x width x length: 170 x 20 x 3000 mm suitable for BARRIER-S11/S12 post and VARIO BARRIER-V12 foot unit For use when no parapet higher than 150mm is available! BARRIER-R21 LINEAR TIE, stainless steel (AISI 304) for connecting two rail pipes BARRIER-R11 BARRIER-R30 CORNER TIE, plastic for creating a corner of 2 rail pipes BARRIER-R11 BARRIER-F22 TOE BOARD BRACKET for fastening the toe board to the vario BARRIER-V12 foot unit, stainless steel (AISI 304) for fastening the BARRIER-F20 toe board to the VARIO BARRIER-V12 foot unit BARRIER-R40 WALL TIE, plastic Version

9 18 A DIMENSIONS 1000 / 1200 / A A - A A 1000 / 1200 / A A - A ~ ~ / 1650 / / 1650 / 1950 for product description, see BARRIER-R50 END SEAL, plastic end seal of two rail pipes BARRIER-R11 Projection of the rail pipe max. 500 mm! BARRIER-R91 END CAP for BARRIER-R11 Diameter x thickness: 36 x 2 mm Packaging unit: 2 pieces Material: plastic end cap for rail pipe BARRIER-R11 Projection of the rail pipe max. 350 mm! BARRIER-S POST, System VARIO, straight, fastened Length: 1080 mm BARRIER-T20 DOOR SET opening selectable up to 800 mm max. For load-bearing implementation, 2 x BARRIER-V10 weights required for each door side! BARRIER-V12 VARIO-FOOT UNIT, stainless steel (AISI 304) VARIO foot unit without boom/post, for creation of a load-bearing collective side protection BARRIER-S BOOM Length: 1150 mm standard length for VARIO system, escape route as per plans BARRIER-Z FOOTWAY RAIL for emergency escape routes Height x width x length: 50 x 80 x 3000 mm Application: emergency escape routes for the creation of emergency escape routes using concrete slabs Version

10 SYSTEM-TOP OF PARAPET for a detailed view, see right A further solution using the BARRIER side protection system from INNOTECH consists of installation on the parapet. No weights are required for the implementation of this system. It allows people to move on the roof even better and more freely. BARRIER-A21 ADAPTER on the top of the parapet Effective height: 135 mm, stainless steel (AISI 304) for fastening the post BARRIER-S13 to the top of the parapet SYSTEM VARIANTS BARRIER-ATTIKA-OBEN SIDE PROTECTION SYSTEM top of parapet Mountable on: parapet (top), stainless steel (AISI 304) System pitch: 90 BARRIER-F20 TOE BOARD Height x width x length: 170 x 20 x 3000 mm suitable for BARRIER-S11/S12 post and VARIO BARRIER-V12 foot unit For use when no parapet higher than 150mm is available! COMPONENTS BARRIER-Z11 RATING PLATE for BARRIER (EN / EN ISO / DIN / NF E ) BARRIER-F21 TOE BOARD BRACKET for fastening the toe board to the BARRIER-S13 post Height x width: 25 x 48 mm Packing unit: 2 items, stainless steel (AISI 304) for attachment of the BARRIER-F20 toe board to the BARRIER-S13 post Version

11 DIMENSIONS O O 15 for product description, see BARRIER-F23 TOE BOARD CONNECTION SET, stainless steel (AISI 304) for connecting two BARRIER-F20 toe boards BARRIER-R50 END SEAL, plastic end seal of two rail pipes BARRIER-R11 Projection of the rail pipe max. 500 mm! BARRIER-R11 ALUMINIUM PIPE, straight Diameter x wall thickness x length: 36 x 2.5 x 3000 mm BARRIER-R21 LINEAR TIE, stainless steel (AISI 304) for connecting two rail pipes BARRIER-R11 BARRIER-R91 END CAP for BARRIER-R11 Diameter x thickness: 36 x 2 mm Packaging unit: 2 pieces Material: plastic end cap for rail pipe BARRIER-R11 Projection of the rail pipe max. 350 mm! BARRIER-S POST, straight, fastened Length: 1050 mm BARRIER-R30 CORNER TIE, plastic for creating a corner of 2 rail pipes BARRIER-R11 BARRIER-R40 WALL TIE, plastic BARRIER-T20 DOOR SET opening selectable up to 800 mm max. For load-bearing implementation, 2 x BARRIER-V10 weights required for each door side! Version

12 SYSTEM-AT THE SIDE OF PARAPET for a detailed view, see right The BARRIER side protection system from can also be mounted on the outside of the parapet. The system can be conveniently adjusted in its inclination angle, allowing for exceptional adaptability to individual aesthetic demands of particular constructions. A variably adjustable spacing bracket [JC1] also enables completely correct installation of the side protection system, even in the presence of additional insulation. BARRIER-A10 ADAPTER on the side of the parapet System pitch: 90, 75, 60, stainless steel (AISI 304) for fastening the post BARRIER-S13 to the inside of the parapet SYSTEM VARIANTS BARRIER-ATTIKA-SEITLICH SIDE PROTECTION SYSTEM inside or outside of parapet, stainless steel (AISI 304) Mountable on: parapet (inside or outside) System pitch: 90, 75, 60 BARRIER-A31 SPACER BRACKET for parapet, stainless steel (AISI 304) 2 different adjustment ranges (65 mm 105 mm or 100 mm 145 mm) for BARRIER-A10 and BARRIER-A11 COMPONENTS BARRIER-Z11 RATING PLATE for BARRIER (EN / EN ISO / DIN / NF E ) BARRIER-R11 ALUMINIUM PIPE, straight Diameter x wall thickness x length: 36 x 2.5 x 3000 mm Version

13 DIMENSIONS , for product description, see BARRIER-R21 LINEAR TIE, stainless steel (AISI 304) for connecting two rail pipes BARRIER-R11 BARRIER-R30 CORNER TIE, plastic for creating a corner of 2 rail pipes BARRIER-R11 BARRIER-R91 END CAP for BARRIER-R11 Diameter x thickness: 36 x 2 mm Packaging unit: 2 pieces Material: plastic end cap for rail pipe BARRIER-R11 Projection of the rail pipe max. 350 mm! BARRIER-S POST, straight, fastened Length: 1050 mm BARRIER-R40 WALL TIE, plastic BARRIER-R50 END SEAL, plastic end seal of two rail pipes BARRIER-R11 Projection of the rail pipe max. 500 mm! BARRIER-T20 DOOR SET opening selectable up to 800 mm max. For load-bearing implementation, 2 x BARRIER-V10 weights required for each door side! Version

14 SYSTEM-AT THE SIDE-FOLD AWAY OF PARAPET for a detailed view, see right The BARRIER side protection system from has a special characteristic: the system installed on the parapet is almost invisible, because it can be folded down. Therefore this system, which can be folded up, is perfectly suited to fit in with the building aesthetics. BARRIER-A11 ADAPTER on the side of the parapet, foldable System pitch: 90, foldable, stainless steel (AISI 304) for fastening the post BARRIER-S13 to the inside of the parapet SYSTEM VARIANTS BARRIER-ATTIKA-SEITLICH (KLAPPBAR) SIDE PROTECTION SYSTEM inside of parapet (fold-away) Mountable on: parapet (inside), stainless steel (AISI 304) System pitch: 0, 90 BARRIER-A31 SPACER BRACKET for parapet, stainless steel (AISI 304) 2 different adjustment ranges (65 mm 105 mm or 100 mm 145 mm) for BARRIER-A10 and BARRIER-A11 COMPONENTS BARRIER-Z11 RATING PLATE for BARRIER (EN / EN ISO / DIN / NF E ) BARRIER-F20 TOE BOARD Height x width x length: 170 x 20 x 3000 mm suitable for BARRIER-S11/S12 post and VARIO BARRIER-V12 foot unit For use when no parapet higher than 150mm is available! Version

15 DIMENSIONS for product description, see BARRIER-F21 TOE BOARD BRACKET for fastening the toe board to the BARRIER-S13 post Height x width: 25 x 48 mm Packing unit: 2 items, stainless steel (AISI 304) for attachment of the BARRIER-F20 toe board to the BARRIER-S13 post BARRIER-R11 ALUMINIUM PIPE, straight Diameter x wall thickness x length: 36 x 2.5 x 3000 mm BARRIER-R91 END CAP for BARRIER-R11 Diameter x thickness: 36 x 2 mm Packaging unit: 2 pieces Material: plastic end cap for rail pipe BARRIER-R11 Projection of the rail pipe max. 350 mm! BARRIER-S POST, straight, fastened Length: 1050 mm BARRIER-R21 LINEAR TIE, stainless steel (AISI 304) for connecting two rail pipes BARRIER-R11 BARRIER-R50 END SEAL, plastic end seal of two rail pipes BARRIER-R11 Projection of the rail pipe max. 500 mm! BARRIER-T20 DOOR SET opening selectable up to 800 mm max. For load-bearing implementation, 2 x BARRIER-V10 weights required for each door side! Version

16 SYSTEM VARIO SYSTEM SKYLIGHT page 2-3 Page 4-5 ESCAPE ROUTE SYSTEM-VARIO ESCAPE ROUTE SYSTEM USING CONCRETE SLABS page 6-7 page 8-9 SYSTEM-TOP OF PARAPET SYSTEM-AT THE SIDE OF PARAPET page page SYSTEM-AT THE SIDE-FOLD AWAY OF PARAPET page Version