Affix Technology Sdn. Bhd.

Size: px
Start display at page:

Download "Affix Technology Sdn. Bhd."

Transcription

1 Affix Technology Sdn. Bhd. Double Sided Foam Tapes Double Sided Foam Tape is made out of foam of PE, PU, PVC and EVA coated with various types of adhesive for various applications. This tape is available in different thicknesses. For general purpose polyethylene foam with a high tack rubber adhesive suitable for applications where UV light may effect the performance of the adhesive. Black double sided foam tape offering a high tack permanent adhesive with excellent ageing properties and weather resistant properties for automotive emblems, decals, mouldings and mirror fixings. Good resistance to solvents, chemicals, UV and heat. : Double Sided Foam Tape is used in refrigeration, stationery, die-cut, impact preventing material or adheres with advertising sign board, automotive number plates and various other applications. Double Sided Polyester Tapes Double Sided Polyester Tape is made from polyester film and is coated with various adhesive depending on the application. This tape has excellent dielectric insulation, solvent resistance and break strength. Double Sided Polyester Tape comes with an aggressive permanent acrylic adhesive system. It offers a wide temperature range and excellent shelf life. Therefore, it can be used for bonding a variety of films, including flexible substrates. This double coated polyester tape is used for splicing, mounting, bonding and application of decorative parts. This tape is also excellent in elongation, high temperature resistance, and insulating. 1 of 5

2 Double Sided Tissue Tapes Double Sided Tissues Tape is made of tissue paper both side coated with acrylic water or solvent based adhesives and laminated with double side release paper. Double Sided Tissues Tape can tears easily by hand, has a fast grabbing acrylic adhesive with excellent holding power and heat resistance. Tissue carrier adds dimensional stability, is flexible and conformable. Double Sided Tissues Tape is laminates well to a variety of substrates, and performs well over a wide temperature range. This tape is used in shoe and leather industry, foam industry, postal service, label high speed splicing of papers, film, and foils; decorative parts; general bonding and lot of other uses. Paper Masking Tapes Masking tape is a type of adhesive tape made with an easy-to-tear backing (usually paper) and a removable pressure sensitive adhesive. It is used mainly in painting, to mask off areas that should not be painted. The adhesive is the key element to its usefulness, as it allows the tape to be easily removed without leaving residue or damaging the surface to which it is applied. The adhesive provides excellent adhesions to a variety of surfaces in a wide range of application fields. And it also comes with the high temperature masking tape with temperature resistance to 120 C, or 140 C for up to 20 minutes. Used in the Auto Refinishing & stowing trades, this tape is suitable for 120 C oven drying and leaves no residue after removal. * Light duty bundling * Packaging and closing * Light duty masking * High Temperature Masking Polyester Insulating Film Varieties of polyester film are approved for UL registered electrical systems that are rated as high as Class F (155 C). It can be used as an electrical insulation and as a laminate with other substrates. Certain laminates are approved for use in systems rated as high as Class R (220 C). Polyester film can be supplied in various thicknesses ranging from 1 mil to 5 mils. In addition to its thermal, chemical, and dimensional stability, polyester film offers a variety of performance characteristics that make it an exceptional value for industrial and specialty markets. : With its flexibility and performance characteristics, it can accommodate a variety of uses. * Transformer insulation films 2 of 5

3 * Membrane touch switches (computer and calculator keyboards) * Flexible printed circuit films * Solvent resistance * Strength and flex resistance * Optically clear to opaque light transmission * Pretreated surfaces * Tear resistance * Excellent adhesion * Superior printability * Hot stamping foil * Photo-resist films * Metallic yarns * Adhesive tapes * Plastic cards (including "smart" cards) * Labels * Lamination films * Brightness enhancement films (computer screens) * Solar and safety window films * Medical test strips * Vacuum insulation panels * Miscellaneous uses In motor applications, selected types of polyester film can be used for ground insulation as slot liners and wedges, as well as phase insulation. In wire and cable applications, it is ideal for mechanical barriers. In addition, specialized polyester film can be used in transformer and highvoltage distribution equipment to wrap the conductors. They are effective for use in hermetic applications with refrigerator and air conditioner motor / compressor assemblies. PVC Tapes PVC Tape -- Polyvinylchloride (PVC) tape is a thermo-plastic polymer material. It is a low cost and easy to process with high dielectric strength and with a good chemicals and moisture resistance. For the automotive industries, harness makers also have their own set of specific demands. The tape needs to be flexible and tear easily for quick and simple application in the vehicle with good unwind to minimize the incidence of repetitive strain injury among the manufacturers' workforce. Tape must continue to perform throughout the lifetime of the vehicle where it will be exposed to heat, cold, vehicle fluids and abrasion. It should not contribute to fogging in the passenger compartment. * Indication purposes Highly recommended in detecting inferior products and as an inspection tool with its variety of color. * Insulating * Wire harness application * Repairing work 3 of 5

4 Bright Silver Polyester Tapes Bright Silver Polyester Tapes (Metalized Polyester Decoration Tape) is made of colored metalized polyester film. It shows a brilliant gloss and metallic finishes with many shining colors. It is coated with pressure - sensitive adhesive. It is very suitable to be used on various kinds of packaging, wrapping and decoration uses, such as on the lamps, cars, album, graphic arts and stationery uses etc. Kapton Polyimide Insulating Film Kapton polyimide film possesses a unique combination of properties. The ability of Kapton to maintain its excellent physical, electrical and mechanical properties over a wide temperature range has opened new design and application areas for plastic filmskapton is extensively used for aerospace, printed circuit and traction motor applications, operating up to 400 C. It has proved to be an indispensable material for advanced applications. : * Excellent performance of insulation and mechanism. * Excellent resistance to high temperature and wide range of working temperature of-60 C to +250 C for long time working and up to +400 C for short time working without any modification in electrical and mechanical properties. * Excellent chemical stability. * Resistance to most organic solution, no corrosion made of PI film by any inorganic acid and alkali except for caustic alkali. * Excellent resistance to flame. * Excellent resistance to radiation. 4 of 5

5 Surface Protection Tapes Surface Protection tape is primarily used to protect the surface of the glass, plastic, aluminium parts, nameplates, etc to prevent scratch during transportation & fabrication. Surface Protection Tape has excellent protection against damages and scratches. This tape has adjustable peeling force, no adhesive residue and weather resistant. Beside that, Surface Protection Tape can be used for the protection of pre-coated sheet metal, which has an exceptional resistance to ultraviolet rays & the specific adhesion allows the protection of surfaces having a greatly corrugated finish. : * Applies directly to surface of glass, peels clean, leaves no residue * Prevents surface damage caused by abrasions and scratching * Used for crate or A-frame packaging * Effective protection for long overland and overseas shipments in bad conditions * Low Tack peels easily at Fabrication plant. Affix Technology Sdn. Bhd , Bayan Point, Medan Kampung Relau, 11900, Bayan Lepas, Penang, Malaysia Tel Fax Mobile Phone sales@affix-technology.com Website Established Year 2001 Languages English 5 of 5