Underscreed Range. High performance acoustic screed isolation. Regupol 7210C. Regupol E-FC-15 TM. Regupol 6010BA. Regupol 6010SH

Transcription

1 Uniclass EPC L5161+L542:N373 E122Y45 CI/SfB (42)+45) R (P3) Regupol Underscreed Range Regupol 7210C Regupol E48 E-FC-6 TM Regupol 6010BA Regupol 6010SH Regupol Quietlay E-FC-15 TM High performance acoustic screed isolation

2 Regupol Underscreed Range Flexible & Sustainable Acoustic Isolation The Regupol range of acoustic isolation materials offers the broadest choice of underscreed materials in the UK. Delivering various levels of impact sound insulation and load bearing capacities, Regupol underscreed products are guaranteed to deliver the most cost effective yet high performing system for any development. Offered exclusively in the UK by CMS Danskin Acoustics, the underscreed range includes Regupol 7210C, Regupol Quietlay, Regupol E48, Regupol 6010BA and Regupol 6010SH. Manufactured from fully recyclable materials and without blowing agents, these systems contribute to the Code for Sustainable Homes. Compatible with all types of subfloors and screeds, Regupol underscreed systems are a flexible specification and have been independently proven to achieve superior impact sound control, even in the most demanding of applications. CMS Danskin Acoustics holds Regupol products as stock in regional warehouses, enabling the efficient delivery and consistent supply of all systems in the underscreed range. Simple to Install Regupol underscreed systems are quick and easy to install, with comprehensive installation guidelines available on request. It is important that prior to installing Regupol materials, base floors are clean, flat and dry. The materials should be cut to size with a sharp craft knife and straight edge. Joints should be taped with Regupol tape. Regupol E48 and Regupol 6010BA should be installed dimple side down. For all Regupol underscreed materials, CMS Danskin Acoustics provides free technical guidance and on-site support during the installation process. CMS Danskin Acoustics can also provide a full and professional installation service throughout the UK, for details and prices on this service, please contact a member of the technical services team. Accreditation: ISO 9001 ISO ISO Regupol 7210C Cost effective screed isolation Regupol 7210C is a cost effective rubber-bound product, manufactured from recycled materials. Compatible with all types of floor screed, this high performing isolation solution delivers superior impact and airborne performance. Regupol 7210C is quick and easy to install, and because separate perimeter strips are not required, using this system helps ensure an efficient and reliable installation. Regupol 7210C is designed for applications where superior and cost effective impact sound control is required. It is particularly suited to the following developments: Apartments Retail Hotels Education Excellent impact and airborne performance Offers long term performance without collapse or bottoming out under high point loads Quick and easy to install with no need for separate perimeter strips Minimises construction heights Supplied in easy to handle sheets (rolls available upon request) Zero global warming potential (GWP) and zero ozone depletion potential (ODP) Design flexibility When used with a sand/cement screed, there is no requirement to use a dpm (please see diagrams) Regupol 7210C Physical Information Sheet length 2250mm 1150mm Material thickness 5mm Regupol 7210C Technical Information Density 720kg/m 3 Tensile strength (DIN 53571) approx 0.5N/mm 2 Thermal conductivity approx 0.14W/mK Elongation at break approx. 75% Temperature resistance -40 C to +115 C Airborne sound insulation (D nt,w + C tr ) 49dB (mean average) Impact sound insulation (L nt,w (Ci)) 46dB (mean average)

3 Regupol 7210C DPM For use with Proprietary Free Flowing Screeds only Regupol 7210C without DPM For use with Sand/Cement Screeds only

4 Regupol Quietlay Cost effective screed isolation Manufactured from recycled materials, Regupol Quietlay is a cost effective, rubberbound resilient layer product and forms part of the globally renowned range of Regupol. Regupol Quietlay is the core proprietary product as part of Robust Detail E-FC-15. Regupol Quietlay is quick and easy to install with no requirement for separate perimeter strips, thus saving time and labour costs. Regupol Quietlay is specifically designed for the residential and student accommodation markets as a superior cost-effective acoustic underscreed material. It is particularly suited to the following developments: Apartments Student Accomodation ROBUST DETAIL APPROVED PRECAST CONCRETE PLANK (E-FC-15 ) Installation Regupol Quietlay without DPM for use with sand/cement screeds only 1. Screed - 65mm (min) cement, sand screed or 40mm (min) proprietary screed of nominal 80kg/m² mass per unit area 2. Taped joint 3. Regupol Quietlay 4. Structural Floor - 150mm (min) precast concrete floor plank kg/m² (min) mass per unit area 5. Isolate skirting and wall lining from screed 6. Ceiling Regupol Quietlay with DPM free flowing screeds Robust Detail approved E-FC-15 No need for separate perimeter strips Supplied in easy-to-handle sheets (rolls available upon request) Offers long-term performance without collapse or bottoming out under high point loads Minimises construction heights Zero Global Warming Potential (GWP) and Zero Ozone Depletion Potential (ODP) When used with a sand/cement screed, there is no requirement to use a DPM (please see diagrams, right) Regupol Quietlay Physical Information Sheet length 2250mm 1150mm Sheet thickness 5mm Regupol Quietlay Technical Information Density 755kg/m 3 Tensile strength (DIN 53571) approx. 0.55N/mm 2 Thermal conductivity approx. 0.14W/mK Elongation at break approx. 78% Temperature resistance -40 C to C Screed Type 65mm (min) cement: sand screed 1. Regupol Quietlay joints to be overlapped by 50mm (min) 2. Regupol Quietlay edge joints to be sealed by tape Screed Type 40mm (min) proprietary screed 1. Regupol Quietlay joints to be butt jointed 2. Regupol Quietlay joints to be sealed by tape guage (min) polythene layer to be laid over whole floor overlapping joints Please refer to E-FC-15 for full construction details.

5 Regupol E48 Enhanced isolation performance Regupol E48 is a recycled tyre crumb product designed to isolate screeds from the main structure of the building, reducing impact energy generated by general footfall. With a dimpled surface on one side, which increases air movement and dissipates energy in channels, Regupol E48 offers enhanced isolation performance and delivers impact sound insulation of L nt,w 47dB, even under heavy loads. Regupol E48 has been developed to offer enhanced isolation and impact sound performance in the following areas: Apartments Hotels Schools Hospitals Retail ROBUST DETAIL APPROVED BEAM & BLOCK FLOORS (E-FC-6) Regupol E48 Technical Information Density approx 600kg/m 3 Tensile strength (DIN 53571) (DIN 53571) approx 0.5N/mm 2 Thermal conductivity approx 0.14W/mK Elongation at break approx 47% Mean Value of Dynamic Stiffness 47MN/m 3 Maximum load bearing capacity 3000kg/m 2 (30kN/m 2 ) Temperature resistance -40 C to +110 C Airborne sound insulation (D nt,w + Ctr) 49dB (mean average) Impact sound insulation (L nt,w (C i )) 47dB (mean average) Installation The UK s only Robust Detail approved system (E-FC-6) for Beam and Block Floors Excellent impact and airborne performance Offers long term performance without collapse or bottoming out under high point loads Resistant to ageing and deformation Quick and easy to install with no need for separate perimeter strips Minimises construction heights Zero global warming potential (GWP) and zero ozone depletion potential (ODP) European Technical Approved 10/0056 Regupol E48 Physical Information Sheet length 1.15m 13m Material thickness 8mm nominal (dimpled one side) Important Note: Regupol E48 must be installed dimple side down.

6 Regupol 6010BA High load bearing isolation Manufactured from recycled tyre crumb, Regupol 6010BA is a high load bearing screed isolation solution. Delivering effective isolation and impact sound insulation, even under heavy loads, Regupol 6010BA is often the preferred choice for premium developments and those where superior acoustic performance is critical. Regupol 6010BA delivers a high end isolation solution for prestigious developments and areas where heavy loads are apparent. These include: Luxury apartments Penthouses Hotels Cinemas/Theatres Schools Hospitals Libraries Retail Gymnasiums Regupol 6010BA Technical Information Mean value of dynamic stiffness 15MN/m 3 Density 590kg/m 3 Tensile strength (DIN 53571) approx 0.3N/mm 2 Thermal conductivity approx 0.14W/mK Elongation at break approx 60% Maximum load bearing capacity 5000kg/m 2 (50kN/m 2 ) Temperature resistance -40 C to +110 C Airborne sound insulation (D nt,w + Ctr) 62dB* Impact sound insulation (L nt,w (C i )) 40dB* * These results were based on a tiled floor finish Excellent impact and airborne performance Minimal creep, even under high loads Resistant to ageing and deformation Quick and easy to install Zero global warming potential (GWP) and zero ozone depletion potential (ODP) European Technical Approved 10/0057 Regupol 6010BA Physical Information Sheet length 1.25m 10m Material thickness 17mm nominal (dimpled one side) Important Note: Regupol 6010BA must be installed dimple side down.

7 Regupol 6010SH High performance screed isolation A recycled tyre crumb product, Regupol 6010SH has been specifically developed for heavy load bearing areas where acoustic performance is critical. A sustainable and high performing screed isolation solution, Regupol 6010SH delivers the greatest load bearing capacity in the CMS Danskin underscreed range. Designed for a wide range of high performance isolation applications, Regupol 6010SH is particularly suited to heavily loaded areas in: Luxury apartments Penthouses Hotels Schools Hospitals Libraries Retail Music studios Regupol 6010SH Technical Information Mean value of dynamic 28.8MN/m 3 (DIN EN ) stiffness Density 595kg/m 3 Tensile strength (DIN 53571) approx 0.40N/mm 2 Thermal conductivity approx 0.14W/mK Elongation at break approx 70% Maximum load bearing capacity 10000kg/m 2 (100kN/m 2 ) Temperature resistance -40 C to +110 C ΔL W (impact improvement) 30dB (BS EN ISO 140-8:1998) Installation Excellent impact and airborne performance Offers long term performance without collapse or bottoming out under high point loads Resistant to ageing and deformation Quick and easy to install High quality and exact material thickness guaranteed Zero global warming potential (GWP) and zero ozone depletion potential (ODP) Regupol 6010SH Physical Information Sheet length 1.25m 10m Material thickness 10mm & 15mm nominal

8 The Regupol underscreed range is just one of a number of acoustic solutions available exclusively in the UK from CMS Danskin Acoustics As advocates of the Pre-Completion Testing route to Part E compliance, the technical expertise provided by CMS Danskin in support of their Regupol 7210C was invaluable. Mark Duffield, Telford Homes. When looking for an underscreed for a Robust Detail development, Regupol E48, supported by a business of CMS Danskin s reputation and experience, was an immediate frontrunner. James Reynolds, Managing Director, Commercial Connections. As acoustic consultants, we were not only impressed with the quality and performance of Regupol 6010BA as a material but also with the quality and integrity of the supporting data and the knowledge of the CMS Danskin team. Kyriakos Papanagiotou, Director, Practical Acoustics. CMS Danskin Scotland Office 1 Netherton Road, Wishaw, North Lanarkshire ML2 0EQ Tel: Fax: CMS Danskin Central/Southern Office Unit 2 Lyncastle Road, Appleton, Warrington WA4 4SN Tel: Fax: For further details please ring Scotland Office: Central/Southern Office: or info@cmsdanskin.co.uk CMS Danskin Acoustics Scotland Office CMS Danskin Acoustics Central/Southern Office IMPORTANT: Directions for use are given for guidance only and are not intended to form part of any contract. They should be varied or adapted to suit your particular materials or conditions of use. Goods supplied by the company are made to approved standards from the highest quality raw materials but no warranty or guarantee is given as to their suitability for any particular purpose or application, and no liability is accepted for any loss or damage arising directly or indirectly from the use of the Company s products irrespective of any information given to us as to intended use of such products. It is therefore recommended that prospective users should test a sample of this product under their own conditions to satisfy themselves that the product is suitable for the purpose intended. CMSD/03-15/MH - Issue 3