This document is a preview generated by EVS

Transcription

1 EESTI STANDARD EVS-EN :2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the buildning structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for soil and waste discharge (low and high temperature) within the buildning structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system EESTI STANDARDIKESKUS

2 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN :2001 sisaldab Euroopa standardi EN :1998 ingliskeelset teksti. Käesolev dokument on jõustatud ja selle kohta on avaldatud teade Eesti standardiorganisatsiooni ametlikus väljaandes. Standard on kättesaadav Eesti standardiorganisatsioonist. This Estonian standard EVS-EN :2001 consists of the English text of the European standard EN :1998. This document is endorsed on with the notification being published in the official publication of the Estonian national standardisation organisation. The standard is available from Estonian standardisation organisation. Käsitlusala: This European Standard specifies the requirements for pipes, fittings and the system of styrene copolymer blends (SAN + PVC) solid-wall piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with "B") and for soil and waste discharge systems for both inside buildings and buried in ground within the building structure (marked with "BD"). Scope: This European Standard specifies the requirements for pipes, fittings and the system of styrene copolymer blends (SAN + PVC) solid-wall piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with "B") and for soil and waste discharge systems for both inside buildings and buried in ground within the building structure (marked with "BD"). ICS , Võtmesõnad: copolymers, definitions, generalities, mixtures, plastic tubes, sewage, styrene, water pipelines, water removal Standardite reprodutseerimis- ja levitamisõigus kuulub Eesti Standardikeskusele

3 EN ICS ; December 1998 English version Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Styrene copolymer blends (SAN+PVC) Part 1: Specifications for pipes, fittings and the system Systèmes de canalisations en plastique pour l évacuation des eauxvannes et des eaux usées (à basse et à haute température) à l intérieur de la structure des bâtiments Mélanges de copolymères de styrène (SAN+PVC) Partie 1: Spécifications pour tubes, raccords ainsi que pour le système Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur Styrol-Copolymer- Blends (SAN+PVC) Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem This European Standard was approved by CEN on CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E

4 Page 2

5 Page 3

6 Page 4

7 Page 5

8 Page 6