ANTI-PERSONNEL SECURITY FENCE RIGID WELDED MESH (RWM)

Transcription

1 ANTI-PERSONNEL SECURITY FENCE RIGID WELDED MESH (RWM) Al Kuhaimi Metal Industries ltd. (KMI) is pleased to announce the newly product launched the Rigid Welded Mesh (RWM) system on rolls and panels. Both systems are conforming to ASTM F2453. The RWM system is green plastic coated on a galvanized steel core with mesh in different sizes as per the project requirement. The system is rigid, secure, fast and simple to install. The deep welding points provide a fence unequalled in its stability and the green coat outside ensure the greatest protection against corrosion. RWM is made from electro-welded zinc and plastic-coated wire with square shaped mesh. The vertical and horizontal wires of the electro-welded mesh are both linear and made in zinc coated steel. Fence available on rolls and Panel System forms and consider as excellent substitute for other conventional type of fences. Design to deter and delay intruder from entering the facility which no conventional anti-personnel fences does! Plastic coating is obtained through the sintering process which uses non-toxic and non-pollution PVC powders which acts to protect wire and the welding spots from corrosion, thus making the product better than any other security fence on the market. The RWM is integrated with posts, stays, barbed wire, concertina razor tape and complete gates and wickets. Its performance is guaranteed for over 10 years if used in normal condition.

2 ROLL FORM, LOW SECURITY APPLICATIONS RWM Our Standard RWM Welded Mesh Rolls 20 or 25 lm can be cut to any size and supplied specifically for your project. Benefits include: Savings on material cost as you ll buy only what you need Easy to install No rolls to flatten curves prior to cutting Better rigidity Maintenance free Specifications compliance For key projects, Standard Mesh Rolls can provide the ideal solution and since custom-made are available, the most complex jobs are made much easier. VEE FENCE SYSTEM PANEL SYSTEM FORM, MEDIUM SECURITY APPLICATIONS Vee mesh panels with wire welded at every intersection and horizontal V profiled reinforced to increase rigidity and to soften the fence visual impact. Double width stretcher-bar fixing to posts to maintain integrity of protection V shaped reinforcing folds for increased rigidity and strength Unique vandal and tamper-proof mesh to post fixing Produced from wires with a finished wire diameter of 4.00mm Mesh is zinc or zinc aluminium alloy coated to BS EN Posts are galvanized to BS EN 1461 as standard Matching gates available 1.8m 2.1m 2.4m 3.0m *Exact panel heights are dependent upon the number of pressed V profile beams specified and their dimensions.

3 FLAT 358 FENCE SYSTEM PANEL SYSTEM FORM, MEDIUM SECURITY APPLICATIONS Unique vandal and tamper-proof mesh to post fixing Double width stretcher-bar fixing to posts to maintain integrity of protection Can be fixed to walls with cranked posts Post options for higher wind loading Mesh is zinc or zinc aluminium alloy coated to BS EN Posts are galvanised to BS EN 1461 as standard Panels may be stacked for fence heights over 3.0m Matching gates available 1.27m 2.134m 2.44m 3.00m 4.20m 5.20m 120mm square 150mm square SIX 358 FENCE SYSTEM An enhanced security version of 358 style mesh system featuring 6mm vertical wires for added rigidity and increased resistance to cutting. Overlapped by a minimum of 75mm at posts to maintain integrity of protection Double width stretcher-bar fixing to posts to maintain integrity of protection Unique vandal and tamper-proof mesh to post fixing Mesh is zinc or zinc - Aluminium alloy coated to BS EN Mesh produced from wires with a finished wire diameter of 4.00mm (horizontal wires) & 6.00mm (vertical wires) Posts are galvanized to BS EN 1461 as standard Matching gates available 1.27m 2.134m 2.44m 2.70m 3.00m 3.30m 4.20m 120mm square 5.20m 150mm square

4 DUAL FENCE SYSTEM Heavy duty, high density and rigidity welded 358 style security fencing system with enhanced resistance to cutting. 5.65mm vertical wires and additional 3.75mm double horizontal wires at 152.4mm centres at rear of panel Unique vandal and tamper-proof mesh to post fixing Mesh is zinc or zinc - Aluminium alloy coated to BS EN Posts are galvanized to BS EN 1461 as standard Matching gates available 3.05m 3.35m 3.66m 3.96m 4.27m 4.58m 120mm square 5.03m 150mm square ULTIMATE FENCE SYSTEM An enhanced security version of the mesh panel system featuring heavy duty 5.75mm horizontal and vertical wires. Heavy-duty 5.75mm wire Double wide stretcher-bar fixing to posts to maintain integrity of protection Unique vandal and tamper-proof mesh to post fixing Mesh is zinc or zinc aluminium alloy coated to BS EN May be powder coated to any other BS or RAL colour to special order May be Marine coated to BS EN to special order Suitable for a variety of Perimeter Intrusion Detection Systems (PIDS), Security Lighting and CCTV Matching swing and sliding gates available Mesh c/c 1.80m 120 x 15.0mm 2.01m 134 x 15mm 2.40m 160 x 15mm 3.00m 200 x 15mm 3.30m 220 x 15mm Panel Width Mesh c/c Finished Wire Diameter

5 PLUS TWIN FENCE SYSTEM High security cut and climb resistant double layer 358 mesh fencing system with small apertures and welds at each intersection eliminate foot and finger holds, prevent objects being passed through and is particularly effective against the use of conventional hand and portable power tools. It features a double mesh layer up to high above ground. Staggered double skin mesh panels with wire welded at every intersection Overlapped by a minimum of 75mm at posts to maintain integrity of protection Unique vandal and tamper-proof mesh to post fixing Bolted and welded double mesh options available Bolted option: features a double layer of zinc aluminium coated mesh as standard Welded option: features a double layer of uncoated wire, hot dip galvanized after manufacture of the mesh panel Posts are galvanized to BS EN 1461 as standard Matching gates available Panel width Mesh Mesh wire Mesh fixing Posts Post centres Post settings Specifications to 5.2m as standard 2515mm Staggered double skin of 76.2mm x 12.7mm resistance mesh welded at each intersection Hard drawn 4mm steel wire Slotted clamp bars and tamper resistant bolts Box section RHS, dimensions to suit fence height 2.4m 800mm mm subject to application Available as Securi-Mesh Plus SR2 version Certified to LPS1175 SR2 Approved for UK Government Use Al Kuhaimi Engineering Metal Industries (KEMI) 58 th Street, Second industrial city P.O. Box 545, Dammam 31421, Saudi Arabia Tel.: / 7449 / 1074 Fax: spd-division@alkuhaimi.com Al Kuhaimi Metal Industries Ltd. 11th Street, First industrial city P.O. Box 545, Dammam 31421, Saudi Arabia Tel.: Fax: info@alkuhaimi.com Copyright 2017 by Al Kuhaimi Metal Industries Ltd (KMI), All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, without the prior written permission of KMI, except in the case of noncommercial uses permitted by copyright law. Ver. 1.0 July 2017