SELF-ADHESIVE MEMBRANES

Transcription

1 SELF-ADHESIVE MEMBRANES VAPORSTOP CA 500 ULTRAFLEX SA NBS ULTRAFLEX SA ULTRAFLEX SA NB ULTRAFLEX SA 1.5 mm STRONG P ULTRAFLEX SA 1.5 mm STRONG G KNOWLEDGE. EXPERIENCE. CRAFTSMANSHIP.

2 SELF-ADHESIVE MEMBRANES Long operational lifetime, reliability and convenience of installation that s the ideal waterproofing. Any defect, especially when it comes to foundations, will certainly lead to destruction of the entire system and huge financial losses to the customer. Application of self-adhesive materials make possible to install reliable waterproofing where the standard torch-on application is forbidden, and high flexibility and elasticity allow the materials to be used on surfaces of any complexity and in limited space. APPLICATION AREA: ADVANTAGES: Application on surfaces, where torch-on application is prohibited Simple installation Application on surfaces of any complexity Does not require extra equipment Waterproofing of underground (below-grade) parts of premises and engineering structures Indoor waterproofing of premises and buildings Waterproofing of confined area, where standard technologies cannot be applied (bathroom floor). Can be used in parquetry and floor installation As an underlay on pitched roofs and as a vapor barrier on the corrugated steel sheets and precast concrete slabs Corrosion protection of steel pipes and junctions Quick installation Cold application prevents smoke, odors and noise Self-adhesive waterproofing is a type of materials, that combines all the advantages of torch-on applied materials and non-torch-on installation, which helps to avoid issues associated with the use of flame. 2

3 VAPORSTOP CA 500 VAPORSTOP CA 500 Vapor barrier with aluminum foil intended to use as a reliable vaporproofing layer in any roofing constructions. Self-adhesive bottom surface and high tensile strength ensure the ability of the material to withstand the weight of the person standing between the corrugations of the profiled metal deck without breaking or stretching. INTENDED USE: Material is used as a vapor barriers in construction of public and industrial buildings with normal temperature and humidity conditions (malls, warehouse complexes, sport centers etc.). ADVANTAGES: High workforce productivity few installation steps Easy to install an ideal vapor barrier Vapor permeability Sd = 1000 Mechanically stable withstand the weight of the person PROPERTIES VAPORSTOP CA 500 Mass per unit area, kg/m 2 0.5±0.10 Peel resistance of joints, N/50mm Flexibility / Flow resistance, С / 90 Tensile strength L / T, N/50 mm 600±120 / 600±120 Reinforcement type Protective covering type: top / bottom glass net aluminum foil / anti-adhesion film Length х width, m

4 VAPORSTOP CA 500 SOLUTION EXAMPLES: 4

5 VAPORSTOP CA 500 METHOD OF APPLICATION: Convenience, simplicity and safety of installation of the membrane are due to the special adhesive polymer-bitumen layer, which allows installation of the material without additional equipment Cut the siliconized anti-adhesion film at the distance of cm from the beginning of the roll by means of roofing knife. Remove the protective film from the edge of the roll and attach the membrane to the surface. Press the place of the first adhesion by roller for the whole width of the membrane. Continue attaching membrane to the base. One worker pulls the film off, while the other smooths the membrane by brush. 5

6 ULTRAFLEX SA NBS ULTRAFLEX SA NBS Used for indoor waterproofing with the direct installation of ceramic tiles onto the material without the need of protective sand cement screed (spunbond has to be treated with the contact primer before application of tile adhesive). Can be used on bases, where the standard torch-on application is forbidden (wood, XPS, etc.). MATERIAL STRUCTURE: 1. Polypropylene (Spunbond) Protects waterproofing layer from mechanical damage. Provides strong sticking of the tile adhesive when treated with the contact primer 2. Self-adhesive polymer-bitumen compound High elasticity index of this layer allows installation of the membrane on surfaces of any complicated shape 3. Easy-removable protective film Used for underside surface protection from sticking in the roll ADVANTAGES: Material is installed in one layer unlike cement based waterproofing, which requires several layers No need to wait for the screed to dry Tiles are installed directly on the material PROPERTIES ULTRAFLEX SA NBS Mass per unit area, kg/m 2 1.5±0.25 Thickness, mm 1.5±0.10 Flexibility / Flow resistance, С Tensile strength, N/50 mm -15 / 85 NPD Reinforcement type Protective covering type: top / bottom no base spunbond / anti-adhesion film Length x width, m

7 ULTRAFLEX SA NBS SOLUTION EXAMPLES: 7

8 ULTRAFLEX SA ULTRAFLEX SA Self-adhesive polyester reinforced SBS-modified bitumen membrane ULTRAFLEX SA is designed to complete secure application. It is used as an underlay on pitched roofs and as a vapor barrier. Could also be used for waterproofing of foundations and engineering structures. Non-skid upper layer from fine-grained sand provide safe movement on the roof during installation. ADVANTAGES: Self-adhesive Simple and quick installation High speed of application Dimensional stability Safety of work MATERIAL STRUCTURE: 1. PE film or sand Protects waterproofing layer from mechanical damage and prevents adhesion of the material in the roll 2. Polymer-bitumen compound Provides reliable waterproofing 3. Polyester Provides excellent elongation and grants optimal strength to the material 4. Self-adhesive polymer-bitumen compound Self-adhesive layer allows to install the material on combustible surfaces 5. Easy-removable protective film Used for underside surface protection from sticking in the roll PROPERTIES ULTRAFLEX SA Mass per unit area, kg/m 2 1.8±0.20 Thickness, mm 1.5±0.20 Flexibility / Flow resistance, С -20 / 90 Tensile strength L / T, N/50 mm 400±100 / 300±100 Reinforcement type polyester Protective covering type: top / bottom polymer film or sand / anti-adhesion film Length x width, m

9 ULTRAFLEX SA SOLUTION EXAMPLES: 9

10 ULTRAFLEX SA NB ULTRAFLEX SA NB Self-adhesive carrier less SBS-modified bitumen membrane ULTRAFLEX SA NB is designed for waterproofing of foundations and engineering structures, indoor waterproofing. Thanks to the special adhesive bitumen compound, the material can be used on surfaces, where the standard torch-on application is forbidden (expanded / extruded polystyrene or wooden base). The absence of a carrier is a key feature of this material that makes it very elastic and flexible. ADVANTAGES: Self-adhesive Simple and quick installation High speed of application High elasticity MATERIAL STRUCTURE: 1. PE film for mechanical protection Protects waterproofing layer from mechanical damage and impacts of chemically aggressive media 2. Self-adhesive polymer-bitumen compound High elasticity of this layer preserves waterproofing undamaged when cracks and splits occur in the foundation 3. Easy-removable protective film Used for underside surface protection from sticking in the roll PROPERTIES ULTRAFLEX SA NB Mass per unit area, kg/m 2 1.5±0.25 Thickness, mm 1.5±0.10 Flexibility / Flow resistance, С -15 / 85 Tensile strength L / T, N/50 mm NPD Reinforcement type no base Protective covering type: top / bottom thick polymer film / anti-adhesion film Length x width, m

11 ULTRAFLEX SA NB SOLUTION EXAMPLES: 11

12 ULTRAFLEX SA 1.5 mm STRONG ULTRAFLEX SA 1.5 mm STRONG Self-adhesive polyester / glass fiber reinforced SBS-modified bitumen membrane ULTRAFLEX SA 1.5 mm STRONG is designed for waterproofing of foundations and engineering structures. On the top side, the material is covered with a special thick PE film that grants additional tensile properties and elongation. The other side of the material is covered with a removable protective film. ADVANTAGES: Self-adhesive Simple and quick installation High speed of application Dimensional stability Additional protection from mechanical impacts MATERIAL STRUCTURE: 1. Thick PE film for additional mechanical protection Protects waterproofing layer from mechanical damage and impacts of chemically aggressive media 2. Polymer-bitumen compound Provides reliable waterproofing 3. Polyester (P) / Glass fiber (G) Reinforced carrier makes the material stable to tension and deformation 4. Self-adhesive polymer-bitumen compound High elasticity of this layer preserves waterproofing undamaged when cracks and splits occur in the foundation 5. Easy-removable protective film Used for underside surface protection from sticking in the roll PROPERTIES P G Mass per unit area, kg/m 2 1.7±0.20 Thickness, mm 1.5±0.20 Flexibility / Flow resistance, С -20 / 85 Tensile strength L / T, N/50 mm 400 / 300 (±100) 350 / 200 (±100) Reinforcement type polyester glass fiber Protective covering type: top / bottom thick film / protective film Length x width, m

13 ULTRAFLEX SA 1.5 mm STRONG SOLUTION EXAMPLES: 13

14 METHOD OF APPLICATION FLAT ROOF OR INDOOR WATERPROOFING Clean and treat the surface with bitumen primer. Fit and straighten the membrane to the area of application. Re-roll the membrane to the center, pre-cut the protective film. Remove the protective film and smooth the membrane. 14

15 METHOD OF APPLICATION FLAT ROOF OR INDOOR WATERPROOFING 5 6! Self-adhesive materials to be installed at the temperatures above +10 С.! Surface must be smooth, dry, clean and with no oil stains. Longitudinal overlaps: mm. End overlaps: 150 mm. Overlaps to be glued with bitumen mastic of 1 mm thickness. On a vertical surface the material to be placed on a height, sufficient according to the thickness of the floor and decoration. 15

16 METHOD OF APPLICATION FOUNDATION WATERPROOFING Surface must be smooth, dry, clean and with no oil stains. For better adhesion, treat the surface with primer. Measure the depth of the foundation and cut the material to the required length. Apply the material from top downward by gradual removing the protective film, unrolling the membrane and smoothing it to the surface. The material to be installed to the height of cm above the ground level. Longitudinal overlaps should be 100 mm, sheet end overlaps mm. 16

17 METHOD OF APPLICATION FOUNDATION WATERPROOFING 5!! The top end of the waterproofing membrane to be fixed at basement level by profiled metal edge strip and sealed. Protect the membrane from mechanical damage by means of thermal insulation or protective slabs. As a protection from mechanical impacts, one can also use PLANTER HDPE membrane. 17

18 THANK YOU FOR ATTENTION! TECHNONICOL India Private Limited