Copings Independently Wind-tested to 232kph (144mph)

Transcription

1 Ci/SfB (47) Column Casings (29) December 2008 Copings Independently Wind-tested to 232kph (144mph) Innovative Solutions for the Supply & Installation of Wind-tested Copings Fascias Soffits Bullnoses Column Casings

2 Contents Introduction Inside Front Cover Our Services 1 Contour Coping System - Technical Information 2 Standard Copings 4 Bespoke/Curved Copings 5 Fascias & Soffits 6 Column Casings 8 Other Products Other Technical Literature Go to to download a copy, or call us on to get a hardcopy. Back Cover Contour Casings Limited Stafford Park 12, Telford TF3 3BJ Tel: +44 (0) Fax: +44 (0) sales@contourcasings.co.uk Introduction To provide unrivalled choice for building designers, Contour Casings exterior finishing range consists of eaves products in high quality aluminium and column casings in standard and bespoke shapes. We offer the highest quality products on short lead times, at competitive prices - supported by site surveys, bespoke technical design and installation services where required. Contour Copings is the high quality aluminium capping system designed for fixing on walls and parapets on all types of building. Its concealed fixing design gives the installation a professional, clean appearance and the weather-sealing feature prevents rainwater entering the structure of the wall or building. All Contour Copings components are powder-coated to ensure long-term durability. Contour s fascia, soffit and special finishes give a co-ordinated look for any building design - be it traditional or contemporary. Our column casing ranges complete the Contour Casings product line-up, making us a one-stop shop for all your requirements in exterior finishes. At Contour Casings, we pride ourselves on our innovative approach and we thrive on the challenge of developing solutions for design problems - no matter how complex. Our strength is our can do attitude and we will do everything to ensure that our products and services meet your every design and construction demand. Contour Casings Providing Innovative Solutions Contour Casings Limited

3 T: F: Our Services At Contour, we don't just believe in supplying high quality, innovative products, we also aim to offer a comprehensive range of services. Site Surveys We undertake all site surveys free of charge as an integral part of our comprehensive service. This enables us to provide you with a full turnkey solution - from conducting site surveys and collaborating with you to develop bespoke designs, to installation. We can tailor our service offer to suit your needs, exactly - without compromise. Technical Design Service If you need something out of the ordinary or require advice about the use of our products, please contact our Technical Department. Our design team is more than happy to help you to adapt our products to develop them in order to suit your application. Our expert surveyors, all having considerable installation experience, will identify the correct size and quantities of products required. Installation Service Our skilled and experienced fitting teams will carry out installations quickly and professionally - at very competitive rates. We offer a full supply-and-fit service for most of our products. Our experienced project management teams will look after the entire installation process for you, keeping disruption to all building occupants to an absolute minimum. All of our fitters are highly skilled, with considerable experience and product knowledge and having had thorough training on installing our products. We can help - whether it is a refurbishment or new-build project, one radiator cover or a whole hospital, wherever in the country you are. Our supply-and-fit service is available on the following products: Wall Copings Fascias and Soffits Column Casings Radiator Guards Pipe Boxing CHAS Accredited Customers can be assured that our systems have been independently assessed and recognised as meeting the relevant national standards. 1

4 2 Technical Information Description The Contour Coping system is an innovative solution, designed to provide a high quality and professional finish to all types of walls and parapets. The system incorporates a number of outstanding and original features to provide a superior look and finish. Tested to wind-speed of 144mph Capable of handling the most extreme weather conditions. Corrosion-free All-aluminium components eliminate the risk of bi-metal interaction and corrosion. Clip-Fix System Snap-on design increases installation speed, keeping costs and disruption down. Optional 30 year guarantee on product finish Syntha Pulvin finish is available for all profiles in order to provide a guarantee of up to 30 years. (Limitations and conditions apply.) Standard and Bespoke Ranges Clients can either select standard sizes for ease of specification or discuss bespoke requirements with us for that unique design. Lightweight All-aluminium components reduce the weight-load on the structure without compromising strength. Concealed-Fixing Design Sleek finish with no obtrusive external fixings. Rattle-free Integral sealing pads eliminate wind-rattle, giving residents within the building a quieter life. Weatherproof Unique, weather-sealing gaskets prevent the ingress of rainwater into the building structure. Contour Coping System an Innovative Solution Contour Casings Limited

5 T: F: Composition, Manufacture Manufactured from aluminium alloy sheet (Grade 1050A-H14/4015-H12 to BS EN 485/515/573), with a minimum thickness of 2mm. For wider and curved copings, the thickness may be increased. Fixing straps and clips are extruded alloy type 6082 T6 to BS 1474:1987, with an extruded neoprene, channel-seal bonded to the top. Shape, Size Standard coping sections are as illustrated. Special profiles can be made (e.g. vertical or with raked legs). Supplied in standard lengths of 3 metres. When specifying or ordering, the total wall width including any finishes, rendering, asphalt or flashings, should be given. Weight, Thickness Typical approximate weights are 1.8kg/m for a 112mm wall and 3.6kg/m for a 338mm wall. Minimum metal thickness 2mm. Appearance, Colour PPC (Polyester Powder Coated) is standard with all welds dressed (where possible). Polyester powder paint finishes are also available (applied after fabrication), in an extensive range of colours. (Chart available on request). For most colours there is a choice of gloss, satin or matt finish. Mill finish is available too. Syntha Pulvin coatings are offered with a 30-year guarantee for standard applications. For marine, swimming pool and industrial applications, this guarantee is for 15 years. For more information, visit the Syntha Pulvin website at For a current colour chart, please contact our Technical Department, tel: or sales@contourcasings.co.uk Chemical Resistance Unaffected by normal industrial atmospheres. Please consult Contour Casings Technical Department when considering installation in conditions of extreme atmospheric pollution or in coastal areas. Thermal Movement Coefficient of linear thermal expansion is 23x10-6/ C. A gap of 2mm to 3mm between coping sections will accommodate normal thermal movement. Lightning Protection Aluminium is a suitable material for use as a lightning conductor. Accessories Purpose-made fittings are supplied for each installation and may include 90 and irregular corners, stop-ends, upstands, T-junctions and column caps. All are mitred and welded to suit. Wind Loading Independent wind-load tests at CERAM have confirmed the Contour Coping system is able to withstand wind-loadings of 232kpm (144mph). A copy of this report is available to download from the technical section of the Contour website at Fixings We supply all necessary fixings with our coping, fascia and soffit products. Example specification: Manufacturer: Contour Casings Ltd, Unit 14, Stafford Park 12, Telford, Shropshire TF3 3BJ. Tel: Fax: sales@contourcasings.co.uk Product and Reference: Contour Coping Wall Capping System. Material Specification: Coping fabricated from pressed aluminium alloy sheet to BS EN 485/515/573, grade 1050A-H14/4015-H12, minimum thickness 2mm. Items to be purpose-made such as corners, junctions and other fittings of the same specification, mitred and welded, to be supplied as necessary. Finish: Mill or polyester powder paint applied after fabrication. Colour reference BS or RAL gloss/satin/matt. Optional Syntha Pulvin finish available with 30 year guarantee. Performance: Independently tested to withstand wind speeds of up to 144mph. Method of Jointing: Extruded aluminium alloy concealed fixing straps with protected double nib extruded neoprene weather seals at all joints and maximum 1500mm centres. Method of Fixing: Copings securely snapped on to fixing strap with allowance for thermal movement. No fixings to pass through the coping or be visible. Fix in accordance with manufacturer s instructions and plan drawings supplied. 3

6 Standard Wall Coping Ranges Description Contour Copings are available in three standard ranges: Square Weathered Ridged Widths: Up to 750mm Height: Up to 300mm Standard Lengths: 1250 / 1500 / 2000 /2500 / 3000mm (Special lengths up to 3000mm can be manufactured to order, to suit your exact requirements). Each profile is available with a complete range of accessories to ensure quick installation and a professional finish, including: Corners: 90º and irregular angles are available Tee Sections: 90º and irregular angles are available Stop-ends Intersection/upstand Corner Section Tee Section Stop-end Standard & Bespoke Contour Coping RangeContour Casings Limited 4

7 T: F: Intersection/upstand Bespoke Wall-coping Ranges In addition to our standard ranges of Unequal legs we can adapt coping, Contour has the design leg lengths and brackets to suit expertise and experience to produce situations where equal legs bespoke coping products, including: are not suitable. Curved sections manufactured to any radius to give a contemporary appearance to curved parapet walls. Integration with other finishes we can develop our products to interface with other building finishes. Square Coping Section Special profiles rather than just the three standard profiles, please feel free to discuss your design ideas. Please contact our Technical Department for more information and we will be happy to discuss your requirements in detail. Weathered Coping Section Ridged Coping Section 5

8 6 Fascias & Soffits Contour Casings design and manufacture fascia and soffit profiles to almost any size or shape, including curved, bullnose and elliptical designs. We are able to produce sections to match existing profiles. Square and rectangular profiles offer a traditional appearance to building eaves and are commonly used in refurbishment and replacement projects. Bullnose and quadrant fascias are very popular and provide a contemporary finish to a building. Elliptical and aerofoil fascias produce modern, sleek lines to an eaves design. They are especially useful when it is necessary to disguise a deep roof construction. All fascia profiles can be designed to integrate with our soffit ranges. Please advise our Technical Department when discussing your requirements. Where necessary, ventilation slots can be incorporated into the eaves system. Please contact our Technical Department to discuss your requirements. Contour Casings Fascias and Soffits Range Contour Casings Limited

9 T: F: Brackets and carcassing can be supplied where necessary to provide a purpose-made support system which can speed up installation. Contour soffit panels and planks are versatile, easy to install and attractive. The concealed fixing system is manufactured from aluminium. Plank width modulated to suit soffit width Plank System The Plank system produces the traditional shiplap appearance. Supplied in three metre lengths as standard, the widths are custom made to suit the soffit width. Plank systems also have concealed fixing. Secret Fix System The Secret-Fix panel system eliminates visible fixings to provide a seamless, uninterrupted soffit line. Panels are supplied in three metre lengths as standard, but other lengths can be supplied to facilitate matching windows, columns, mullions or other gridline influences. Panel width up to 1200mm Standard Panel System The standard panel system provides a practical and low-cost soffit solution. Colour-matched fasteners are supplied to reduce their impact. Panel width up to 1200mm 7

10 Column Casings Contour Casings offers a large range of column casings for use in a wide variety of applications. We have column covers for internal and external use, available in a wide range of shapes, sizes and finishes. The materials we offer for external applications include: Aluminium Stainless Steel GRP (Glass Reinforced Polymer) Column cladding is supplied prefinished and factory assembled to speed up fitting and they can be provided on a supply-only or supply-and-fit basis, with installation carried out by our own team of dedicated installers. We pride ourselves on our flexible approach to business and are committed to developing our existing product range to meet individual and bespoke project requirements. Aluminium & Stainless Steel Column Casings Contour Casings offers a comprehensive range of bespoke metal column casings from standard circular, square and rectangular to the more design-led shapes. Each system is complemented by a vast array of finishes and fixing solutions. Our complete range of casings is available in a wide variety of finishes including Brushed/Polished Aluminium, Polyester Powder Coated Aluminium, perforated sheet etc. polyester powder coated (PPC) aluminium casing can also be finished in BioCote to provide an antimicrobial finish, ideal for medical and food-processing applications. Each range also incorporates a variety of accessories including inner collars, decorative outer rings, male/female assembly joints, integrated lighting, signage capabilities etc. We offer a range of standard circular sizes, but are also able to develop non-standard shapes on a projectby-project basis. Standard Column Casing Range Internal Diameter (mm) Length (mm) Contour-Ply Column Encasement Solutions Contour Casings Limited 8

11 T: F: GRP - Glass Reinforced Polymer Column Casings GRP (Glass Reinforced Polymer) products from Contour Casings, offer designers an almost unlimited range of design options. Whether it is a column casing, canopy, wall or ceiling cladding, signage, cornices, ornamental elements or one-off design feature, we can offer a totally customised solution. Because of to the nature of the material, Contour GRP column casings are perfectly suited to external applications, as they are weather resistant. They are also ideal for wet areas such as swimming pools. Products can be supplied in any RAL or BS colour and we can also provide a wide range of textures, including: Smooth Woodgrain Concrete Stonecast Slate Granulite We offer a standard range of circular/semi-circular sizes, but are more than happy to develop one-off designs on a project-by-project basis. Please consult our Technical Department for further details. Standard Column Casing Range Internal Diameter (mm) Length (mm)

12 Contour Casings offers a wide range of interior and exterior building products, including: Contour-Ply Pipe Casing An unrivalled range of pre-formed plywood, polymer and metal service casings for covering exposed pipes and services in an attractive, quick and economical manner. Contour Radiator Guards Trionic LST Radiators Award-winning radiator guard designs and LST radiators, incorporating BioCote antimicrobial finish to inhibit the growth of bacteria. Interior Column Casings To complement the exterior ranges of column casings, we also supply preformed plywood and GRG column casings in a wide range of sizes, shapes and finishes. Floor Ducting Designed to carry pipework and cabling in screeded floors. Contour Casings Limited Stafford Park 12, Telford TF3 3BJ Tel: +44 (0) Fax: +44 (0) sales@contourcasings.co.uk