Date Sent 4/27/2017 Job # Project Name West 33rd Street Transmittal # LOT S2784. From:

Transcription

1 SUBMITTAL TRANSMITTAL Date Sent 4/27/2017 Job # Project Name West 33rd Street Transmittal # LOT S2784 To: Stephen B Jacobs Group PC From: Jeremy Behrhorst Cauldwell Wingate Company 380 Lexington Avenue, New York, NY Phone: Fax: Park Ave South, New York NY CC: The Torkian Group PLEASE REVIEW AND RETURN BY: 04/30/17 return priority Standard nmlkji Critical nmlkji Spec Section: Submittal Type: Product Data Scope/Area: Distribution: w/links (Merged Copy) Package Company Contact Comments Stephen B Jacobs Group PC Submittal listing: Submittal # Doc. # Doc. Date Item Subject Action RIDGE inch Semi Rigid Insulation For Approval REMARKS: Reviewed for Compliance with Contract Documents and Specifications SUBMISSION LINK/RETURN DOCUMENT: RIDGE _3 inch Semi Rigid Insulation_For Approval_ pdf PDF File 2.32 MB

2

3 Thermafiber 90 & 40 Mineral Wool Insulation PRODUCT DATA SHEET Description Thermafiber products are designed to provide enhanced fire protection in curtain wall and perimeter fire containment systems. These products are non-combustible, moisture-resistant, non-corrosive, non-deteriorating, mildewresistant and vermin-resistant. Its natural dark color provides shadowing in glass spandrels. 40 & 90 insulations provide thermal insulation, fire containment, enhanced acoustical performance, and vapor control in many different UL and Intertek (formerly OPL) listed fire containment assemblies of 1, 2, and 3-hr ratings. Standards, Codes Compliance ASTM C 665 Type I, III (Class A, Category 1) ASTM C 612 ASTM C Type IA, IB, II, III, IVA 90 Type IA, IB, II, III, IVA ASTM E 136 Non-combustible as defined per NFPA Standard 220 CAN/ULC S114 ASTM E 96 ASTM E 96 ASTM C 1104 Complies Unfaced, 50 Perms as tested Foil Faced, 0.02 Perms as tested Sorption less than 1% by volume ASTM C 356 Linear Shrinkage 1200º F (650º C) ASTM C 356 Flame Spread 0, Smoke Developed 0 Curtain wall products are approved by: New York City Board of Standards & Appeals (under BSA SM & accepted by MEA , Vol. II). Also, MEA M and MEA M. Product Options 40, 2" or greater thickness, is available with a vapor retarding foil facing. 90, 1" or greater thickness, is available with a vapor retarding foil facing. Recycled Content Options 1,2 : EPA Choice Fiber (US Government Buildings)...Minimum 75% Standard Fiber...70% 1. Recycled content options other than standard must be specified at time of order. Technical Data Nominal Density Tested to ASTM E 84 Tested to ASTM C 518 Unfaced Foil Faced 75 [24 C] BTU.in/hr.sq. ft. F R value per inch of thickness*** Flame Spread Smoke Developed Flame Spread Smoke Developed pcf pcf ***R = thickness divided by k Perimeter Fire Containment Tests Per ASTM E 2307 insulation is the insulation for perimeter fire containment. Thermafiber, Inc. has performed decades of testing in all of the containment systems listed below. Aluminum Spandrel Curtain Wall Fire Containment Steel Stud-Framed/Gypsum Sheathing Curtain Wall Fire Containment Glass Spandrel Curtain Wall Fire Containment Granite Spandrel Curtain Wall Fire Containment Precast Concrete Spandrel For more complete test information, see UL and Intertek (formerly OPL) Directories. For a full listing of containment systems visit and click on Fire Rated Assemblies. For additional job specific details and accessory materials necessary to complete the Perimeter Fire Containment System, please refer to UL design listing. 3 3 Underwriters Laboratories (UL) Designs, Fire Resistance Directory, UL. 333 Pfingsten Road, Northbrook, IL See Owens Corning publication Enclosure Solutions Perimeter Fire Containment System E2307 Curtain Wall Technical Bulletin (Pub. No ) for more information. Installation products should be mechanically attached to horizontal and vertical mullions with architect approved insulation fasteners. Reinforce insulation on the outer insulation surface at the safing line. Typical reinforcement members include hat channels, L angles, and T bars. Thermafiber Inc. s patented Impasse system is designed to quickly and easily mechanically attach insulation to curtain wall systems. Availability Thickness* Widths** Lengths** 40 2" - 7" 24", 36", 72" 48", 60", 72" 90 1" - 7" 24", 36", 72" 48", 60", 72" Tolerances +¼", - ⅛" ± ⅛" +¾", - ¼" ** Thicknesses are available in 1/2 increments. ** Custom sizes are available upon request. Thermafiber Insolutions Thermafiber Insolutions offers industry leading technical and engineering assistance to architects, specifiers, and contractors. These services include CAD drawings, engineering judgments, LEED Credit Information, and product recommendations. Contact our technical services department at or ThermafiberInsolutions@owenscorning.com.

4 Features Exceptional performance in Perimeter Fire Containment Systems Provides fire containment in rated assemblies Fire resistant to temperatures above 2,000 F (1,093 C) Helps conserve energy, reduce greenhouse gas emissions Mold-resistant Enhances acoustical performance Natural dark color provides shadowing in glass spandrels Minimum 70% recycled content 2 Contributes to credits in several green building programs such as LEED and Green Globes Environmental and Sustainability Owens Corning is a worldwide leader in building material systems, insulation and composite solutions, delivering a broad range of high quality products and services. Owens Corning is committed to driving sustainability by delivering solutions, transforming markets and enhancing lives. More information can be found at Notes For additional information refer to the Safe Use Instruction Sheet (SUIS) found in the SDS Database via Submittal Approvals Job Name Contractor Date Thermafiber mineral wool insulation provides the critical components of the perimeter fire containment system in the Trump International Hotel and Tower in Chicago, IL. Certifications and Sustainable Features 2 Verified by ICC-ES to contain a minimum of 70% recycled content. See ICC-ES Evaluation Report VAR-1025 at icc-es.org. Environmental Product Declaration (EPD) has been certified by UL Environment. For more information visit ul.com/epd. Material Health Certificate from Cradle to Cradle Products Innovation Institute. For more information visit c2ccertified.org. Disclaimer of Liability Thermafiber, Inc. shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than the intended use. Thermafiber, Inc. liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing within thirty (30) days from date it was or reasonably should have been discovered. LEED is a registered trademark of the U.S. Green Building Council. Green Globes is a registered trademark of Green Building Initiative, Inc. UL and the UL logo are trademarks of UL LLC. INTERTEK and the Intertek logo are registered trademarks of Intertek Group plc. THERMAFIBER, INC. ONE OWENS CORNING PARKWAY TOLEDO, OHIO, USA TFIBER1 [ ] Pub. No B formerly TF686. Printed in U.S.A. November THE PINK PANTHER & Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered trademark of Owens Corning Owens Corning. All Rights Reserved Thermafiber, Inc. All Rights Reserved.

5 UL.COM/EPD RIDGE Building Insulation with ECOSE Technology Submittal Date Product Provided Unfaced Batts and Blankets Glass mineral wool insulation is designed to friction fit between framing members. Specifier permitted choice of warm side vapor retarders, including foil backed gypsum board or polyethylene film. Unfaced glass mineral wool insulation is also an excellent sound control insulation, designed for installation in floor systems and in partition walls between rooms or dwellings. High density glass mineral wool insulation is specifically designed for sidewall, cathedral ceiing and floor applications where optimal thermal performance is required, and space for insulation is limited. Knauf Insulation High Density (HD) Ecobatt products offer a superior thermal value per inch as compared to standard building insulation products. R-15-3½ High Density EcoBatt batts are designed for use in 2 x 4 framed wall sections. R-21-5½ and R-23-5½ High Density batts are designed for use in 2 x 6 framed sidewalls and floor assemblies, where air spaces are neither required nor desired. R-30-8¼ High Density Cathedral Ceiling batts are designed for use in 2 x 10 framed cathedral ceiling or floor assemblies where a 1 air space is required. R-38-10¼ High Density Cathedral Ceiling batts are designed for use in 2 x 12 framed cathedral ceiling or floor assemblies where a 1 air space is required. When tested in accordance with ASTM E 84, material has a Fire Hazard Classification of 25/50 or less. and cancelled federal specifications: (ASTM C 665, Type I, Class A) (HH-I-521F, Type I, Class A) (ASTM E 136) 2½" R-8 5½ R-23 HD 3½ R-11 8 R-25 3½" R-13 8¼ R-30 HD 3½ R-15 HD 10 R-30 6¼" R-19 10¼" R-38 HD 5½ R R-38 5½ R-21 HD 13¾ R-49 6½ R-22 Kraft Faced Batts and Blankets Glass mineral wool insulation with asphalted kraft paper with or without stapling flanges. Kraft vapor retarder has vapor transmission (permeance) rating of 1.0 or less. Kraft Faced glass mineral wool insulation has excellent sound control properties, designed for installation in floor systems and in partition walls between rooms or dwellings. Kraft facing will burn and should not be left exposed. Install kraft facing in contact with approved finish material. and cancelled federal specifications: (ASTM C 665, Type II, Class C) (HH-I-521F, Type II, Class C) 3½" R-11 5½ R-23 HD 3½" R-13 8 R-25 3½ R-15 HD 8¼ R-30 HD 6¼" R R-30 5½ R-20 10¼ R-38 HD 5½ R-21 HD 12 R-38 6½" R-22 13¾ R-49 Foil Faced Batts Glass mineral wool foil insulation with asphaltedcoated kraft/foil facing with flanges. Foil vapor retarder has vapor transmission (permeance) rating of.05 or less. Insulation should not be left exposed. Cover with fire rated finishing surface. and cancelled federal specifications: (ASTM C 665, Type III, Class B) (HH-I-521F, Type III, Class B) 3½" R-11 5½" R-21 HD 3½" R-13 10" R-30 6¼" R-19 12" R-38 FSK-25 Foil Faced Batts Glass mineral wool foil insulation with flanged reinforced foil/scrim/kraft facing with an average vapor transmission (permeance) rating of.04. When tested in accordance with ASTM E 84, material has a Fire Hazard Classification of 25/50 or less. and cancelled federal specifications: (ASTM C 665, Type III, Class A) (HH-I-521F, Type III, Class A) 3½" R-11 8 R-25 3½" R-13 10" R-30 6¼" R-19 12" R-38 5½ R-21 HD Specialty Insulation Sill Sealer with ECOSE Technology A flexible unfaced glass mineral wool insulation designed for use between the sill plate and the foundation wall to provide an air infiltration barrier. When tested in accordance with ASTM E 84, material has a Fire Hazard Classification of 25/50 or less. and cancelled federal specifications: (ASTM C 665, Type I, Class A) (HH-I-521F, Type I, Class A) 1¼" x 6" ECOSE Technology Description ECOSE Technology is a revolutionary binder chemistry that makes Knauf Insulation products even more sustainable than ever. It is based on rapidly renewable bio-based materials rather than non-renewable petroleum-based chemicals traditionally used in glass mineral wool insulation products. ECOSE Technology reduces binder embodied energy and does not contain phenol, formaldehyde, acrylics or artificial colors. Sustainability Knauf Insulation products used for thermal insulating purposes recover the energy that it took to make them in just hours or a few days, depending on the application. Once installed, the product continues to save energy and reduce carbon generation as long as it is in place (carbon negative). Glass mineral wool insulation with ECOSE Technology contains three primary ingredients: Sand, one of the world s most abundant resources. Recycled bottle glass. ECOSE Technology, which reduces binder embodied energy by up to 70% and total product embodied energy by approximately 4%. Thermal Performance Thermal resistance (R-value) of the blanket insulation only is certified to be as represented above when measured at a mean temperature of 75 F (24 C) and subject to manufacturing and testing tolerances. Glass Mineral Wool and Mold Glass mineral wool insulation will not sustain mold growth. However, mold can grow on almost any material when it becomes wet and contaminated. Carefully inspect any insulation that has been exposed to water. If it shows any sign of mold it must be discarded. If the material is wet but shows no evidence of mold, it should be dried rapidly and thoroughly. If it shows signs of facing degradation from wetting, it should be replaced. Quality Assurance On-line production is periodically tested to ensure that Knauf Insulation products delivers the stated thermal performance or better when properly installed at the label thickness. See Knauf Insulation Commercial Building Insulation Submittal for additional products. CERTIFIED ENVIRONMENTAL PRODUCT DECLARATION UL Environment GREENGUARD Gold Knauf Insulation achieved UL Environment GREENGUARD Gold Certification and is validated to be formaldehyde free. UL Environment GREENGUARD Certification Program Products are certified to UL Environment GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg. This product is covered by one or more U.S. and/or other patents. See patent BI-BT-SS Knauf Insulation LLC One Knauf Drive, Shelbyville, IN Tel: (800) ext FAX: (317) ENVIRONMENTAL PRODUCT DECLARATION UL.COM/EPDCERTIFIED 2015 Knauf Insulation LLC