Table of Contents. Version 1.0. Specifications 2 Technical Specifications 2 Colors and Lumen Count 2. Packaging 6

Transcription

1 Version 1.0 Table of Contents Specifications 2 Technical Specifications 2 Colors and Lumen Count 2 Physical Specifications 3 Part Number Naming Convention 3 Packaging 6 Mounting Hardware 7-8 Standard 7 Plastic 7 Spring Clip 8 Flexible 8 Connectors 4-6 Seamless 4 Snap 5-6 Male & Female 6 Anti-Wicking Ferrule 6 Testing 9-10 Certifications 9 Fixture Testing 9 Charts 10 E For More Information Toll Free: 1 (888) Or Visit /contact-us/

2 Technical Specifications Light Dimension 0.45 x 1.14in (11.5x29mm) Output W / WW LED Light SMD LED Chip Continuous Length Single Feed 49.2ft (15m) Double Feed 98.4ft (30m) Light Surface Round profile 270 Lumen Maintenance 70,000 Hours 25 C : 90, C 50,000 Hours 50 C : 70,000 Hours 50 C Electrical Input Voltage 24V DC Power Consumption 3.66W/ft (12W/m) Physical LED Count 43 LEDs / ft (144 LEDs/m) LED Spacing 0.55in (13.89mm) Cutting Unit Length 3.28in (83.3mm) (12 LEDs) Thermal Management Free air convection Fixture Connections End, side & bottom lead wires Minimum Bend Diameter 4.72in (120mm) (Side Bending) Temperature Ranges Installation -40 F to 122 F (-40 C to 50 C) Operating -40 F to 131 F (-40 C to 55 C) Humidity 0-95% non condensing Dependability Warranty 5 Year Limited Warranty Safety Certification IP Rating Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP67 with appropriately rated accessories Available Colors Color CCT Wavelength 2200K 2238 ± 102K 5700K 5669 ± 245K WW + W 3465 ± 245K Lumen Count Color Per Foot Per Meter Power/m 2200K >51.83lm >170lm / 5700K >42.68lm >210lm / WW + W >115.85lm >380lm 12W *Color Jackets: For standard or custom color jacket options, contact your Account Manager. Min. order quantity of 656ft (200m). 2

3 Physical Specifications 5 Year 270 D:120mm IP 67 5 Year Light Profile Bending Direction 29 mm 1.14 inch 270 Round 11.5 mm 0.45 inch Side Bending Minimum Bending Diameter Light Emitting Surface 120 mm 4.72 inch Light Emitting Surface Part Number Naming Convention Fixtures SF-11D W-E-XXX-24DC LED Color (3 digits) Lead Connector FA-11D W-XX-X-XX-XXX-P Length (3 digits) Exit Type (2 Digits) For Fixture End (1 Digit) Connector Type (2 Digits) For full part number naming rules, please refer to the document on 3

4 Connectors IP67: Rated for wet locations, not submersion. Factory Assembly only. Seamless Connectors Seamless End Exit NA-11D W-SE-0-EN-XXX-P 16mm 11mm 5mm 12mm 16mm 11.5mm 2mm 29mm 29mm 11.5mm Seamless Side Exit NA-11D W-SE-1-SR-XXX-P NA-11D W-SE-2-SL-XXX-P 16mm 11.5mm 12mm 2mm 29mm 13.5mm 11mm 14mm Seamless Bottom Exit NA-11D W-SE-0-BO-XXX-P 16mm 11.5mm 2mm 14mm 42mm 31mm 2mm 12mm Seamless End Cap NA-11D W-SE-0-EC Seamless Jumper NA-11D W-SE-0-EJ-XXX-P 4

5 Connectors IP67: Rated for outdoor use. Factory Assembly or DIY. Snap Connectors Snap End Exit 21.5mm FA-11D W-SC-1-EN-XXX-P FA-11D W-SC-2-EN-XXX-P 36mm 19.5m m 50.5mm 19.5m m 46.5m m Snap Side Exit FA-11D W-SC-1-SL-XXX-P FA-11D W-SC-2-SL-XXX-P FA-11D W-SC-1-SR-XXX-P FA-11D W-SC-2-SR-XXX-P 21.5mm RL 36mm 30mm 57mm Snap Bottom Exit 21.5mm FA-11D W-SC-1-BO-XXX-P FA-11D W-SC-2-BO-XXX-P 30mm 57mm 36mm Snap End Cap FA-11D W-SC-1-EC FA-11D W-SC-2-EC 36m m 21.5m m 19.5mm 19.5m m 46.5mm Snap Jumper FA-11D W-SC-0-EJ-XXX-P L 5

6 Connectors IP67: Rated for outdoor use. Factory Assembly or DIY. Snap Connectors Snap Power T Feed FA-11D W-SC-0-TF-XXX-P L2 L1 50mm Male & Female NA-XX-BC-DC-CXX-F NA-XX-BC-DC-CXX-M NA-XX-BN-XXA-CXX-F NA-XX-BN-XXA-CXX-M NA-XX-PL-XXA-CXX-F NA-XX-PL-XXA-CXX-M Anti-Wicking Ferrule The anti-wicking ferrule on the cable is located 115mm (±5mm tolerance) from the connector. It prevents water ingress from inside the cable (and hence protects the circuit board against corrosion. 30m m 12m m Packaging White Box Packing Box Fixture Length White Box Dimensions Packing Box Dimensions # Of White Boxes Package Weight in (5m) 15.35x2.05x19.67in (39x5.2x50cm) 20.47x16.14x11.02in (52x41x28cm) lbs (14kg) 393.7in (10m) 20.08x2.05x24.41in (51x5.2x62cm) 25.2x20.87x11.02in (64x53x28cm) lbs (26kg) 393.7in (10m) 20.08x2.05x24.41in (51x5.2x62cm) 25.2x20.87x6.9in (64x53x17.5cm) lbs (16kg) 787.4in (20m) 26.77x2.05x31.1in (68x5.2x79cm) 31.9x27.56x4.92in (81x70x12.5cm) lbs (22kg) 6

7 Mounting Hardware Standard Anodized Aluminum Channel 22mm 13.8mm W x H Standard Length Part Number L1 L2 Screw Hole Φ Hole # 0.54 x 0.87in 1.38in (35mm) CL-11-R-AL-3C5-SD 0.69in (17.5mm) / Φ0.14in (3.5mm) 1 (13.8 x 22mm) 19.69in (500mm) CH-11-R-AL-0M5-SD 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) in (1000mm) CH-11-R-AL-01M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) in (2000mm) CH-11-R-AL-02M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10 Plastic Channel L1 L2 W x H Standard Length Part Number L1 L2 Screw Hole Φ Hole # 0.55 x 0.94in 19.69in (500mm) CH-11-R-PL-0M5-SD 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) 3 (14 x 24mm) 39.37in (1000mm) CH-11-R-PL-01M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) in (2000mm) CH-11-R-PL-02M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10 7

8 Mounting Hardware Spring Clip Anodized Aluminum Channel 25.6mm 16.2mm L1 L L L3 L4 W x H Standard Length Part Number L1 L2 L3 L4 Screw Hole Φ Hole # Clip # 0.64 x 1.01in 1.38in (35mm) CL-11-R-AL-3C5-SP 0.69in (17.5mm) / 0.2in (5mm) 0.98in (25mm) Φ0.14in (3.5mm) 2 1 (16.2 x 25.6mm) 19.69in (500mm) CH-11-R-AL-0M5-SP 0.98in (25mm) 8.86in (225mm) 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) in (1000mm) CH-11-R-AL-01M-SP 0.98in (25mm) 9.35in (237.5mm) 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) in (2000mm) CH-11-R-AL-02M-SP 0.98in (25mm) 9.6in (243.8mm) 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10 9 Stainless Steel Flexible Channel 0.4mm 10.7mm 24.5mm 13.2mm 4.76mm 4.76mm W x H Standard Length Part Number 0.52 x 0.97in 3.94in (100mm) CH-11-F-SS-0M1-SD (13.2 x 24.5mm) 11.81in (300mm) CH-11-F-SS-0M3-SD 19.69in (500mm) CH-11-F-SS-0M5-SD 35.43in (900mm) CH-11-F-SS-0M9-SD This profile can be mounted using screws in any gaps where the channel bends. 8

9 Testing Certifications Testing Organization Certificate Serial N Report Reference UL 2108 UL E E CE-EMC SGS SZEM LMV SZEM Fixture Testing Optical Testing Spectrum Analysis Photometric Distribution Lumen Maintenance & Lifetime IES LM 79 (Lumen, CCT, CRI, XY, SDCM, wavelength) IES LM 73 (Lumen intensity distribution & Lux diagram) IES LM 84 & IES TM28 Temperature Testing Normal Temperature Test Abnormal Operation Test UL1598 & UL2388 & IEC & IEC UL1598 & UL2388 & IEC & IEC Durability Testing Bending Test Swing Test Tensile Test Twist Test Ball Impact IK07 IK08 Manufacturer-defined, 500 cycles UL2388, >750 cycles Manufacturer-defined, > the weight of light in max. connection length double feed Max connection length double feed Manufacturer-defined, >200 cycles UL1598 & UL2388 & IEC & IEC IEC62262 Environmental Testing Chlorinated Water Immersion BG9667, PH , free chlorine mg/L Salt Water Immersion IEC , Sailinity 4% Salt Spray Test IEC Outdoor Exposure Manufacturer-defined Flame Resistance UV Exposure IPX5, IPX6, IPX7, IPX8 Temperature Shock Constant Temperature UL94 ASTMG 154, ISO , 340nm IEC60529 Manufacturer-defined, -40 C - 60 C (typical temperature range) Manufacturer-defined, 70 C (typical temperature range) 9

10 Testing Remark: Δ Δ Power (W) Charts (346 5± ) (250 0± ) (5028± ) Power vs. CCT Color Temperature (K) Current (ma) Working Temperature vs. Current (Color temperature in 3500K) Temperature ( C) 10