Mondéco. System Data CHEMICAL RESISTANT UV RESISTANT RESINS SEAMLESS APPLICATIONS VERSATILE APPLICATIONS. STANDS UP TO truck and fork-lift traffic

Transcription

1 Withstands Extreme Temperatures SUPERIOR STRENGTH & DURABILITY DEMARCATION & COLOUR ZONING TECHNICAL INFORMATION Mondéco System Data VERSATILE APPLICATIONS EXTREMELY HARD WEARING CHEMICAL RESISTANT BRight FinishES SEAMLESS APPLICATIONS STANDS UP TO truck and fork-lift traffic UV RESISTANT RESINS

2 14 EN13813 Mondéco Arctic (6-7 mm nominal) Description Mondéco Arctic is a seamless epoxy resin terrazzo floor finish that utilises a white binder with a blend of light coloured aggregates, mirror glass & metallic particles. Uses Mondéco Arctic seamless terrazzo is suitable for bespoke environments where design aesthetics and durability are of paramount concern. Benefits Aesthetically pleasing - enhances the working environment Seamless finish (except for underlying slab joints and edging detail trim) Easy to clean and maintain Abrasion resistant Standard colour chart System Design Mondéco Arctic Alaska Polar Primer Substrate Glacier The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

3 Model Specification Product: Mondéco Arctic Finish: Satin Thickness: 6-7 mm nominal (8 mm ground down to 6-7 mm) Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25 N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Arctic system. Products Included in this System Primer: Peran 0.25 kg/m 2 Topping: Mondéco 18.0 kg/m 2 (Applied at 8 mm, ground down to 6-7 mm) Grout Stage 1: TZ 0.06 kg/m 2 approx. Grout Stage 2: up to 0.2 kg/m 2 Applied in 1 or 2 layers Sealers: Flowseal PU Gloss 0.03 kg/m² approx. Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity litres/m 2 in total (applied in 3 layers) Additional layers may be applied to achieve the desired finish. Detailed application instructions are available upon request. Installation Service The installation must be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site. Note Mondéco Arctic has been developed to provide superior UV light resistance and minimise yellowing. However, no products are 100% totally colour fast and may change colour over time. Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s flexibility or chemical resistance characteristics. Separate each adjacent application bay (a day s lay) by a trim and ensure that single batch components are used within each bay. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Environmental considerations Recycled materials are used wherever possible. The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Bond Strength > 2.0 N/mm 2 EN Impact Resistance 4 Nm EN ISO 6272 Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 10 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 60 C Water Permeability Chemical Resistance Slip Resistance Method described in BS (typical values for 4-S rubber slider) Nil Karsten test (impermeable) Consult Technical Dept. Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 8. Speed of Cure 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a neutral detergent /floor maintainer and dry burnish. Maintain the surface appearance with a suitable high solids metalized floor polish as required (dependant on levels of traffic). Please contact our Technical Advisors for further details and cleaning documents. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise , 01 UK Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details.

4 14 EN13813 Mondéco Mirrazzo (6-7 mm nominal) Description Mirrazzo is a seamless epoxy resin terrazzo floor finish that utilises a blend of recycled crushed clear, coloured and mirror glass & metallic particles. Uses Mirrazzo seamless terrazzo is suitable for airport and railway terminals, shopping centres, restaurants, hotels and environments where design aesthetics and durability are of paramount concern. Changing the colour of the resin matrix with the same aggregate blend can create a totally different effect. Benefits Aesthetically pleasing - enhances the working environment Seamless finish (except for underlying slab joints) Easy to clean and maintain Abrasion resistant More than 50% recycled material Standard colour chart Botticino Sapphire Project References Basement Bar & Restaurant, Belfast; Grand Canal Hotel, Dublin; Garda Headquarters, Dublin; Altnagelvin Hospital, Derry, Co. Londonderry. System Design Mondéco Mirrazzo Nephrite Sodalite Pearl Grey Bardiglio Primer Haematite Black Diamond Substrate The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

5 Model Specification Product: Mirrazzo Finish: Satin Thickness: 6-7 mm nominal (8 mm ground down to 6-7 mm) Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25 N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Mirrazzo system. Products Included in this System Primer: Peran 0.25 kg/m 2 Topping: 18.0 kg/m 2 (Applied at 8 mm, ground down to 6-7 mm) Grout Stage 1: TZ 0.06 kg/m 2 approx. Grout Stage 2: Mondéco/Mirrazzo up to 0.2 kg/m 2 Applied in 1 or 2 layers Sealers: Flowseal PU Gloss 0.03 kg/m² approx. Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity litres/m 2 in total (applied in 3 layers) Additional layers may be applied to achieve the desired finish. Detailed application instructions are available upon request. Installation Service The installation must be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site. Note Mondéco/Mirrazzo is not totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s flexibility or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Separate each adjacent application bay (a day s lay) by a trim and ensure that single batch components are used within each bay. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Environmental considerations Recycled materials are used wherever possible. The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Bond Strength > 2.0 N/mm 2 EN Impact Resistance 4 Nm EN ISO 6272 Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 10 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 60 C Water Permeability Chemical Resistance Slip Resistance Method described in BS (typical values for 4-S rubber slider) Nil Karsten test (impermeable) Consult Technical Dept. Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 8. Speed of Cure 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a neutral detergent /floor maintainer and dry burnish. Maintain the surface appearance with a suitable high solids metalized floor polish as required (dependant on levels of traffic). Please contact our Technical Advisors for further details and cleaning documents. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise , 08 UK Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details.

6 14 EN13813 Mondéco Classic (9 mm) Description Mondéco Classic is a seamless epoxy resin terrazzo floor finish that utilises a blend of marble chippings. Uses Mondéco seamless terrazzo is suitable for airport and railway terminals, shopping centres, restaurants, hotels and environments where design aesthetics and durability are of paramount concern. Changing the colour of the resin matrix with the same aggregate blend can create a totally different effect. Benefits Aesthetically pleasing - enhances the working environment Seamless finish (except for underlying slab joints) Easy to clean and maintain Abrasion resistant Bespoke colours and/or aggregate designs can be produced to special order at additional cost Standard resin colour and aggregate blends Project References Wembley Park Station, London UK; Birmingham International Airport, UK; Shires Shopping Centre, Leicester, UK; RAF Lakenheath, UK; Merck, Sharp & Dohme, Clonmel, Ireland. Mondéco Classic Dawn Oyster White Mondéco Classic Dusk Oyster White System design Mondéco Classic Mondéco Classic Dawn Dusty Grey Mondéco Classic Dusk Dusty Grey Mondéco Classic Dawn Agate Grey Mondéco Classic Dusk Agate Grey Primer Mondéco Classic Dawn Provence Blue Mondéco Classic Dusk Provence Blue Substrate The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

7 Model Specification Product: Mondéco Classic Finish: Gloss Thickness: 9mm (11 mm ground down to 9 mm) Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone : Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25 N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Mondéco system. Products Included in this System Primer: 0.25 kg/m 2 Topping: Mondéco Classic (average density kg/m 2 (Applied at 11 mm, ground down to 9 mm). Grout: Mondéco/Mirrazzo up to 0.2 kg/m 2 Applied in 1 or 2 layers Sealers: Flowseal PU Gloss 0.03 kg/m² approx. Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity litres/m 2 in total (applied in 3 layers) Additional layers may be applied to achieve the desired finish. Detailed application instructions are available upon request. Installation Service The installation must be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Note Mondéco/Mirrazzo is not totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s flexibility or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Separate each adjacent application bay (a day s lay) by a trim and ensure that single batch components are used within each bay. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Bond Strength > 2.0 N/mm 2 EN Impact Resistance 16 Nm EN ISO 6272 Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 10 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 60 C Water Permeability Nil Karsten test (impermeable) Chemical Resistance Contact Technical Department Slip Resistance Dry >40 low slip potential Method described in BS (typical values for 4-S rubber slider) (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 8. Speed of Cure 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a neutral detergent /floor maintainer and dry burnish. Maintain the surface appearance with a suitable high solids metalized floor polish as required (dependant on levels of traffic). Please contact our Technical Advisors for further details and cleaning documents. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 17 UK

8 14 EN13813 Mondéco Crystal Ice (9 mm) Description Mondéco Crystal Ice is a seamless epoxy resin terrazzo floor finish that utilises a blend of mirrored and clear glass chippings. Uses Mondéco seamless terrazzo is suitable for airport and railway terminals, shopping centres, restaurants, hotels and environments where design aesthetics and durability are of paramount concern. Changing the colour of the resin matrix with the same aggregate blend can create a totally different effect. Benefits Aesthetically pleasing - enhances the working environment Seamless finish (except for underlying slab joints) Easy to clean and maintain Abrasion resistant Bespoke colours and/or aggregate designs can be produced to special order at additional cost Standard resin colour and aggregate blends Project References Iluma (Urban Entertainment Centre), Bugis, Singapore; Impiana Hotel, Kuala Lumpur, Malaysia; Victoria & Albert Museum, London UK; Manchester Airport, UK; Zafco, Dubai, UAE; Kensington City Academy, Liverpool, UK. System Design Mondéco Crystal Ice Mondéco Crystal Ice Oyster White Mondéco Crystal Ice Dusty Grey Primer Mondéco Crystal Ice Agate Grey Mondéco Crystal Ice Provence Blue Substrate The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

9 Model Specification Product: Mondéco Crystal Finish: Gloss Thickness: 9mm (11 mm ground down to 9 mm) Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25 N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Mondéco system. Products Included in this System Primer: 0.25 kg/m 2 Topping: Mondéco 25.0 kg/m 2 (Applied at 11 mm, ground down to 9 mm) Grout: Mondéco/Mirrazzo up to 0.2 kg/m 2 Applied in 1 or 2 layers Sealers: Flowseal PU Gloss 0.03 kg/m² approx. Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity litres/m 2 in total (applied in 3 layers) Additional layers may be applied to achieve the desired finish. Detailed application instructions are available upon request. Installation Service The installation must be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Note Mondéco/Mirrazzo is not totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s flexibility or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Separate each adjacent application bay (a day s lay) by a trim and ensure that single batch components are used within each bay. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Focus on the Floorzone Flowcrete are market leaders in specialist industrial and commercial flooring. Systems available include: underfloor heating systems, floor screeds, surface damp proof membranes, decorative floor finishes, seamless terrazzo, car park deck waterproofing, corrosion resistant systems to name just a few. Our objective is to satisfy your Floorzone needs. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Bond Strength > 2.0 N/mm 2 EN Impact Resistance 4 Nm EN ISO 6272 Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 10 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 60 C Water Permeability Nil Karsten test (impermeable) Chemical Resistance Contact Technical Department Slip Resistance Method described in BS (typical values for 4-S rubber slider) Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 8. Speed of Cure 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a neutral detergent /floor maintainer and dry burnish. Maintain the surface appearance with a suitable high solids metalized floor polish as required (dependant on levels of traffic). Please contact our Technical Advisors for further details and cleaning documents. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 17 UK

10 14 EN13813 Mondéco Exotic (9 mm) Description Mondéco Exotic is a seamless epoxy resin terrazzo floor finish that utilises a blend of marble chippings with mirrored glass or mother of pearl. Uses Mondéco seamless terrazzo is suitable for airport and railway terminals, shopping centres, restaurants, hotels and environments where design aesthetics and durability are of paramount concern. Changing the colour of the resin matrix with the same aggregate blend can create a totally different effect. Benefits Aesthetically pleasing - enhances the working environment Seamless finish (except for underlying slab joints) Easy to clean and maintain Abrasion resistant Bespoke colours and/or aggregate designs can be produced to special order at additional cost Standard resin colour and aggregate blends Mondéco Exotic Ice Oyster White Mondéco Exotic Pearl (09) Oyster White Project References Westfield London, UK; Ascot Racecourse, UK; Manchester Airport, UK; Royal Geographical Society, London, UK; Times Square Centre, Dubai, UAE; Al Ghurair City, Dubai, UAE; Sharjah Mega Mall, Dubai, UAE. System Design Mondéco Exotic Mondéco Exotic Ice Dusty Grey Mondéco Exotic Pearl (09) Dusty Grey Mondéco Exotic Ice Agate Grey Mondéco Exotic Pearl (09) Agate Grey Primer Mondéco Exotic Ice Provence Blue Mondéco Exotic Pearl (09) Provence Blue Substrate The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

11 Model Specification Product: Mondéco Exotic Finish: Gloss Thickness: 9 mm (11 mm ground down to 9 mm) Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25 N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Mondéco system. Products Included in this System Primer: 0.25 kg/m 2 Topping: Mondéco Exotic (average density kg/m 2 (Applied at 11 mm, ground down to 9 mm) Grout: Mondéco/Mirrazzo up to 0.2 kg/m 2 Applied in 1 or 2 layers Sealers: Flowseal PU Gloss 0.03 kg/m² approx. Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity litres/m 2 in total (applied in 3 layers) Additional layers may be applied to achieve the desired finish. Detailed application instructions are available upon request. Installation Service The installation must be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site Note Mondéco/Mirrazzo is not totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s flexibility or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Separate each adjacent application bay (a day s lay) by a trim and ensure that single batch components are used within each bay. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Bond Strength > 2.0 N/mm 2 EN Impact Resistance 4 Nm EN ISO 6272 Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 10 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 60 C Water Permeability Chemical Resistance Slip Resistance Method described in BS (typical values for 4-S rubber slider) Nil Karsten test (impermeable) Contact Technical Department Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 8. Speed of Cure (from application of Mondéco screed) 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a neutral detergent /floor maintainer and dry burnish. Maintain the surface appearance with a suitable high solids metalized floor polish as required (dependant on levels of traffic). Please contact our Technical Advisors for further details and cleaning documents. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 18 UK

12 13 EN13813 Mondéco Earth (7 mm) Description Hygienic epoxy terrazzo floor finish that can contain an antimicrobial agent. Aggregate: Granite and flint. Uses Environments where hygiene, chemical resistance and durability are of paramount concern - Mondéco Earth is suitable for heavy-duty food and pharmaceutical production and process areas, corridors and kitchens Also suitable for airport and railway terminals, shopping centres, hotels and restaurants. Standard colour chart Provence Coconut Benefits Aesthetically pleasing enhances the working environment Joint free surface (except for underlying slab joints) Easy to clean and maintain Can contain an anti-microbial agent Polygiene, which inhibits growth of bacteria, fungi, moulds, and mildew Highly chemical resistant Abrasion and impact resistant Anti-static grade available Project References Food:- Nestlé, McVities, Jacobs, Cadbury. Pharmaceutical:- Roche, Wyeth, Schering, Boots, Merc Sharpe Dome, Astra Zeneca. Henry Moore Art Gallery, Leeds, UK; Planet Hollywood, Cannes, France; Karen Millen, Sweden. Dusty Grey Agate Grey System Design Mondéco Earth Oyster White Chilli Pepper The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order. Primer Substrate

13 Model Specification Product: Mondéco Earth Finish: Satin/Matt Thickness: 9 mm (ground down to 7 mm) Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd. Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Flowcrete Hydraseal DPM can be incorporated directly beneath the Mondéco system. Products Included in this System Primer: 0.25 kg/m 2 Topping: Mondéco Earth (average density kg/m 2 (Applied at 9 mm, ground down to 7 mm) Grout: Mondéco/Mirrazzo up to 0.2 kg/m 2 Applied in 1 or 2 layers Sealers: Flowseal PU 0.06 kg/m 2 /coat 1st coat Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity. 2nd coat Dilute the pre-mixed product with 500ml (500g) clean water per 4.6kg unit of Flowseal PU Satin to ensure the correct application viscosity and consistent finish. Detailed application instructions are available upon request. Installation Service The installation should be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site. Note Mondéco/Mirrazzo is not totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s flexibility or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Separate each adjacent application bay (a day s lay) by a trim and ensure that single batch components are used within each bay. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Performance class - Special BS 8204 Bond Strength > 2.0 N/mm 2 EN Impact Resistance 16 Nm EN ISO 6272 Cat: A (<0.5mm) BS Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 10 N/mm 2 BS Temperature Resistance Tolerant of sustained temperatures up to 60 C Water Permeability Nil Karsten Test (impermeable) Chemical Resistance Contact Technical Department Toxicity (when cured) Taint Free to sensitive foodstuffs. Slip Resistance Dry >40 low slip potential Method described in BS (typical values for 4-S rubber slider) (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA type 8. Speed of Cure 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 17 UK

14 Mondéco ESD Earth (8 mm) Description Anti-static, hygienic epoxy terrazzo floor finish. Uses To provide a hard wearing, decorative, seamless, antistatic floor compliant with EN IEC Typical uses are electronic, food, pharmaceutical and chemical production and process areas in environments where hygiene, chemical resistance and durability are of paramount concern. Benefits Aesthetically pleasing enhances the working environment Seamless finish (except for underlying slab joints) Meets EN IEC anti-static requirements Easy to clean and maintain Highly chemical resistant Abrasion and impact resistant Project References Baxter Healthcare; Astra Zeneca Standard colour chart System Design Provence Coconut Copper Tape Mondéco ESD Earth Dusty Grey Agate Grey Oyster White Chilli Pepper Substrate Flowprime Flowprime with Conductive Scatter The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order.

15 Model Specification Product: Mondéco ESD Earth Finish: Semi-gloss Thickness: 10 mm (ground down to 8 mm) Colour: Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS 8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Mondéco system. Products Included in this System Primer: 0.25 kg/m 2 Conductive Grid of 10 mm wide copper tape. Primer: 0.25 kg/m 2 with Conductive ~ 2 kg/m 2 Topping: Mondéco ESD Earth (avge density kg/m 2 (Applied at 10 mm, ground down to 8 mm) Grout: Mondéco/Mirrazzo up to 0.2 kg/m 2 Applied in 1 or 2 layers Sealers: Flowseal PU 0.06 kg/m 2 /coat 1st coat 2nd coat Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity. Dilute the pre-mixed product with 500ml (500g) clean water per 4.6kg unit of Flowseal PU Satin to ensure the correct application viscosity and consistent finish. Detailed application instructions are available upon request. Installation Service The installation should be performed by an approved Flowcrete Contractor with a documented quality assurance scheme. Obtain details of our approved applicators by contacting our customer service team or enquiring via our web site Note Mondéco/Mirrazzo is not totally colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted. This is more noticeable in very light colours but does not compromise the product s flexibility or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Separate each adjacent application bay (a day s lay) by a trim and ensure that single batch components are used within each bay. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Electrical Resistance 5 x x 10 9 Ohms (EN IEC ) Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Bond Strength > 2.0 N/mm 2 EN Impact Resistance 16 Nm EN ISO 6272 Cat: A (<0.5mm) BS Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 8 N/mm 2 BS Temperature Resistance Softens over 70 C Water Permeability Nil Karsten Test (impermeable) Chemical Resistance Contact Technical Department Toxicity Taint Free to sensitive foodstuffs. Slip Resistance Dry >40 low slip potential Method described in BS (typical values for 4-S rubber slider) (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS type 8. Speed of Cure 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Microbial / Fungal Resistance At an additional cost, an antimicrobial additive can be incorporated into Mondéco ESD Earth to provide control of most bacteria and fungi which come into contact with the floor. Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 12 UK

16 13 EN13813 Mondéco TZ (7 mm) Description A high temperature resistant, steam cleanable polyurethane terrazzo finish. Uses Ideal for pharmaceutical, food and chemical process areas where the floor is subjected to hot fluid spillages, steam cleaning, heavy traffic, impact and chemical attack. Benefits Attractive terrazzo finish Excellent thermal shock resistance, steam cleanable Contains Polygiene, an antimicrobial additive based on silver ion technology Excellent all round chemical resistance Seamless and hygienic finish Easy to clean High abrasion resistance Low odour during installation Standard colour chart Project References Lever Brothers; Pfizers; Baxter Healthcare; Bayer; GlaxoSmithKline; Astra Zeneca; Nestlé; RHM; Fox s Biscuits; Mars; Bovril; Courage; Wrigley; Coca Cola; Fisher; Hazelwood Foods. System Design Cream Mustard Mondéco TZ Dark Green Ochre Mid Grey Tile Red The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special order. Substrate Primer

17 Model Specification Product: Mondéco TZ Finish: Satin/Matt Thickness: 9 mm (ground down to 7 mm) Colour: Preparatory work and application in accordance with manufacturer s instructions. Manufacturer: Flowcrete UK Ltd Telephone: Customer Service (0) Substrate Requirements Concrete or screed substrate should be a minimum of 25N/mm 2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS 8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Mondéco system. Products Included in this System Primer: 0.25 kg/m 2 Topping: Mondéco TZ (average density kg/m 2 (Applied at 9 mm, ground down to 7 mm) Grout: Flowfresh 0.1 kg/m 2 Sealers: Flowseal PU 0.06 kg/m 2 /coat 1st coat Dilute the pre-mixed product 1:1 by weight with clean water to ensure the correct application viscosity. 2nd coat Dilute the pre-mixed product with 500ml (500g) clean water per 4.6kg unit of Flowseal PU Satin to ensure the correct application viscosity and consistent finish. Detailed application instructions are available upon request. Installation Service The installation should be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site. Note Mondéco TZ is not colour fast and may change colour slightly over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present. This is more noticeable in light colours and blues but does not compromise the product s flexibility or chemical resistance characteristics. We have endeavoured to adopt colours within our standard range which minimise this change. Intensively coloured products (e.g. hair colorants, medical disinfectants etc.) and plasticizer migration (e.g. from rubber tyres) can lead to irreversible discoloration in the surface. Please contact our Technical Services Department for further advice. Environmental considerations The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors. Flowcrete UK Ltd The Flooring Technology Centre Booth Lane Sandbach Cheshire CW11 3QF UK. Tel: +44 (0) Fax: +44 (0) uk@flowcrete.com Flowcrete UK Ltd is an RPM company Technical Information The figures that follow are typical properties achieved in laboratory tests at 20 C and at 50% Relative Humidity. Reaction to fire B FL - s1 EN Wear Resistance Max. wear depth < 50 μm EN Bond Strength > 2.0 N/mm 2 EN Impact Resistance 20 Nm EN ISO 6272 Compressive Strength > 55 N/mm 2 EN Flexural Strength > 20 N/mm 2 EN Tensile Strength > 8 N/mm 2 BS Temperature Resistance Tolerant to intermittent spillages up to 120 C or sustained dry heat from -40 C to 105 C (at 9 mm thickness) Coefficient of thermal expansion 1.7 x 10-5 C (ASTM C531) Thermal conductivity 1.20 W/m C (BS 874) Water Permeability Nil Karsten Test (impermeable) Vapour Permeability 2 g / m 2 / 8 mm / 24 hours Surface Hardness 300 seconds. Koenig Hardness Test Chemical Resistance Contact Technical Department Slip Resistance Dry >40 low slip potential Method described in BS (typical values for 4-S rubber slider) (in accordance with HSE and UKSRG guidelines) The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/ or surface contaminants (wet or dry). Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ or surface contaminants (wet or dry) - please contact our Technical Advisors for further details and specifications. Complies with BS /FeRFA category 8. Speed of Cure 10 C 20 C 30 C Light traffic 24 hrs 16 hrs 10 hrs Full traffic 72 hrs 48 hrs 36 hrs Full chemical cure 12 days 7 days 7 days Aftercare - Cleaning and Maintenance Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent. Microbial / Fungal Resistance The Polygiene antimicrobial additive incorporated into Mondéco TZ provides control of most bacteria and fungi which come into contact with the floor. Antimicrobial Active substance: Silver biocide Tested: ISO 22196/JIS Z2801. Important Notes Flowcrete s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise. Model Specification written for Flowcrete UK Ltd. Please consult Technical Team in own country region for specific details , 14 UK