WALL PROTECTIONS. WALL PROTECTIONS Wallgard p. 270 ProtectWALL p. 272

Transcription

1 WALL PROTECTIONS WALL PROTECTIONS Wallgard p. 70 ProtectWALL p

2 our selection of accessories for WALL PROTECTIONS 1 Set-in corner Protects the external corner of walls vs impacts and provides neat finish. Installed under the wall covering. See p. 491 for detailed info 5 ProtectWALL Protects the wall from impacts. Cap Provides a perfect finish and protects the edge of the wall covering. See p. 490 for detailed info 3 4 Welding rod Secures the junction between rolls of floor coverings or wall and floor coverings. Set-on corner Protects the external corner of walls vs impacts and provides neat finish. Installed over the wall covering. See p. 491 for detailed info Cove former PA0 Improves hygiene inside wall corner and makes maintenance easier. See p. 488 for detailed info 66 67

3 WALL PROTECTIONS Technical data Standards Wallgard ProtectWALL 1.5mm ProtectWALL mm ProtectWALL CR (Clean Room) EN 1510 Compact, flexible, calandered, multilayer protection Wallcovering EN , GMP class A Total thickness ISO 4346 (EN 48) 1.3mm 1.50mm.00mm.00mm Total weight ISO 3997 (EN 430) 10g/m 400g/m 3 000g/m 3 000g/m Transparent wear layer ISO 4340 (EN 49) 1.3mm 0.35mm 0.55mm 0.55mm PU-Shield TopClean XP Dimensional stability ISO 3999 (EN 434) 0.40% 0.80% Lengthwise Curl resultant to heat EN 44 mm Wetroom test GBR Class VT Approved Reaction to fire EN ISO BS 476: Part 7 AS/NZS 3837 UNI 8457 ASTM E84 s d0 Abrasion EN 660- Group T: mm 3 Thermal resistance EN m K/W Bs3d0 Electrostatic properties EN 1815 kv Wallcoverings designed to suit all wall conditions and offer protection for healthcare and education environments Light fastness EN ISO 105-B0 6 6 Resistance to impacts EN 59- / ASTM D 46 Resistant to impacts No visible bursts nor cracks Scratch resistance Sclerometer test: Excellent No visible scratch with naked eye Scuff resistance Excellent - No visible mark after cleaning of Flexibility ISO 4344 (EN 435) No damage, no crack of seam strength EN 684 > 400 N/50 mm > 400 N/50mm > 400 N/50mm ISO 6987 (EN 43) Good resistance Excellent Spongeability washability Lyability brushability EN 1956 No change in appearance Contamination control En ISO / GMP Class A Ease of decontamination Clean room test ISO 8690 Good ASTM F4/65 ASTM F51/00 Satisfactory Class A Hygiene Does not favour growth Does not contribute to infection spreading SENSORIAL Benefits Attractive and functional designs Colour coordination with other Tarkett ranges Wide range of accessories FUNCTIONAL Benefits High performance protection from staining and mechanical damage ProtectWALL CR option for clean rooms Easy to install Easy to clean and maintain ENVIRONMENTAL Benefits Unrivalled indoor air quality Improved carbon footprint Form of delivery ISO 4341 (EN 46) Sheet (rolls) Rolls: approx. 30lm x m Colours 6 The above information is subject to modifications for the benefit of further improvement (01/014). Tisse: 10 - Vital: 6 Graphic Lines: - Uni: 1 0 r m x m Abstract: 1 Uni: 6 1 TopClean XP Pur reinforced surface: Excellent resistance to scuffing, soiling and staining and easy maintenance. 1 Transparent wear layer 1 TopClean XP Pur reinforced surface: 1 Excellent resistance to scuffing, soiling 1 and staining and easy maintenance Transparent wear layer Homogeneous vinyl flooring with PU-Shield surface treatment for hygienic and watertight system Printed film 3 Intermediate layer 4 Backing layer 4 Printed film 4 3 Intermediate layer 4 Backing layer 5 5 Download the product offer Wallguard ProtectWALL 1.5mm ProtectWALL mm and CR 68 69

4 WALLGARD Technical data Standards Wallgard Total thickness ISO 4346 (EN 48) 1.3mm Total weight ISO 3997 (EN 430) 10g/m Transparent wear layer ISO 4340 (EN 49) 1.3mm PU-Shield Dimensional stability ISO 3999 (EN 434) 0.40% Wetroom test GBR Class VT Approved Reaction to fire EN ISO BS 476: Part 7 AS/NZS 3837 UNI 8457 ASTM E84 s d0 WALLGARD Main Product Features Impervious surface with PU-Shield Hygienic and watertight Easy to install - vertically or horizontally Attractive and functional design Light fastness EN ISO 105-B0 6 Clean room test ISO 6987 (EN 43) ASTM F4/65 ASTM F51/00 Good resistance Satisfactory Class A Hygiene Does not favour growth The above information is subject to modifications for the benefit of further improvement (01/014). Sustainability Tag 100% 6% Recyclable Recycled content * < 100 µg/m 3 Better Indoor Air Quality * except recycled content *TVOC AT 8 DAYS Logistics Information Available in rolls Rolls length: approx. 30lm General Information Wallgard DoP Manufactured by: Tarkett AB SE Ronneby, Sweden EN 1510:007 +A1:011 Wallgard Play with the Room Designer see page 486 for coordinated accessories offer 71

5 Technical data Standards ProtectWALL 1.5mm Compact, flexible, calandered, multilayer protection Wallcovering EN 1510 Total thickness ISO 4346 (EN 48) 1.50mm Total weight ISO 3997 (EN 430) 400g/m Transparent wear layer ISO 4340 (EN 49) 0.35mm TopClean XP Dimensional stability ISO 3999 (EN 434) Curl resultant to heat EN 44 mm Reaction to fire EN ISO BS 476: Part 7 AS/NZS 3837 UNI 8457 ASTM E84 Bs3d % Lengthwise EN 660- Group T: mm3 Thermal resistance EN m K/W Electrostatic properties EN 1815 kv Light fastness EN ISO 105-B0 Resistance to impacts EN 59- / ASTM D 46 of Flexibility ISO 4344 (EN 435) of seam strength EN 684 ISO 6987 (EN 43) ranges for one global design solution Reduced damage to walls = lower repair 6 Resistant to impacts No visible bursts or cracks Sclerometer test: Excellent No visible scratch with naked eye Scuff resistance Colour coordination with various Tarkett and maintenance costs Abrasion Scratch resistance Impact and scratch resistant Stain and chemical resistant PUR surface treatment Excellent - No visible mark after cleaning No damage, no crack Sustainability Tag EN 1956 Hygiene > 400 N/50 mm 100% 11% * < 10 µg/m 3 Optimal Indoor Air Quality Recyclable Recycled content *except recycled content Spongeability washability Lyability brushability Tisse 1.5mm Main Product Features for easy cleaning and maintenance ProtectWALL - Tissé mm *TVOC AT 8 DAYS Progressively for all our professional vinyl products during 014 Logistics Information Excellent No change in appearance Does not contribute to infection spreading Available in rolls Rolls length: approx. 0lm Laying direction: The above information is subject to modifications for the benefit of further improvement (01/014) Uni 1.5mm Graphic Lines 1.5mm Vital 1.5mm Vital 1.5mm Play with the Room Designer see page 490 for coordinated accessories offer 73

6 Technical data Standards ProtectWALL mm ProtectWALL CR (Clean Room) EN 1510 Compact, flexible, calandered, multilayer protection Wallcovering Compact, flexible, calandered, multilayer protection Wallcovering, GMP class A EN Total thickness ISO 4346 (EN 48).00mm Total weight ISO 3997 (EN 430) 3 000g/m Transparent wear layer ISO 4340 (EN 49) 0.55mm Dimensional stability ISO 3999 (EN 434) Curl resultant to heat EN 44 mm Reaction to fire EN ISO Bs3d0 Abrasion EN 660- Group T: mm3 Thermal resistance EN m K/W Electrostatic properties EN 1815 kv Light fastness EN ISO 105-B0 and maintenance costs 6 Resistant to impacts No visible bursts or cracks Excellent - No visible mark after cleaning EN 684 ISO 6987 (EN 43) Abstract mm Reduced damage to walls = lower repair Sclerometer test: Excellent No visible scratch with naked eye of seam strength for easy cleaning and maintenance ranges for one global design solution ISO 4344 (EN 435) PUR surface treatment Colour coordination with various Tarkett Scratch resistance Spongeability washability Lyability brushability ProtectWALL CR % Lengthwise EN 59- / ASTM D 46 Impact and scratch resistant Stain and chemical resistant Available in.00mm and mm CR (Clean Room) versions Resistance to impacts Scuff resistance Main Product Features TopClean XP of Flexibility mm and CR No damage, no crack Sustainability Tag > 400 N/50mm EN 1956 Excellent 100% 11% No change in appearance Recyclable Recycled content * *except recycled content Contamination control En ISO / GMP Class A Ease of decontamination ISO 8690 Good Hygiene Does not contribute to infection spreading The above information is subject to modifications for the benefit of further improvement (01/014). < 10 µg/m 3 Optimal Indoor Air Quality *TVOC AT 8 DAYS Progressively for all our professional vinyl products during 014 Logistics Information Available in rolls Rolls length: approx. 0lm Laying direction: Abstract mm Uni mm CR (Clean Room) Play with the Room Designer see page 490 for coordinated accessories offer 75