SELF-150. Technical data sheet

Transcription

1 Drainage with system SELF-150 SERVICE ANRIN provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation with our technical office staff and good contact with the field staff. ANRIN is certified according to DIN EN ISO ANRIN DIRECT CONTACT: +49 (0)

2 Product specifications Product specifications Material Nominal width Slope type Joint type Fastening Load capacity Cover gratings SELF-150 Resin concrete 50 and and kg 150 mm Constant invert UNILINK joint Screw fastening Galvanised grating cl. A15, mesh grating suitable for car access, cast iron grating cl. C250 Freely selectable Material properties Channel / component body Polymer concrete: Compressive strength: Bending tensile strength: Modulus of elasticity: Density: Heat resistance: Frost resistance: Water penetration depth: polyester resin-based with mineral aggregates, additives > 90 N/mm² > 22 N/mm² ca. 25 kn/mm² g/dm³ 100 C (permanent loading) -50 C 0 mm Water absorption: 0.05 % Channel cover Cover gratings: Galvanised grating cl. A15, mesh grating suitable for car access, cast iron grating cl. C250 ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Version Page 2 / 5

3 Channel dimensions Cover gratings Slotted steel grating, galvanised Load capacity: A15, : 50, 100 Mesh grating Load capacity: suitable for car access, : 50, 100 Slotted cast iron grating, OvalGrip Load capacity: C250, : 50 ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Version Page 3 / 5

4 Channel types Article no. EAN Designation kg SELF-150 Channel, with galvanised grating, locked* SELF-150 Channel with galvanised grating, locked* SELF-150P Channel with galvanised grating, locked* SELF-150 Channel with galvanised mesh grating, locked* SELF-150 Channel with galvanised mesh grating, locked* SELF-150P Channel with galvanised mesh grating, locked* SELF-150 Channel with slotted cast iron, locked* SELF-150 Channel with slotted cast iron, locked* SELF-150P Channel with slotted cast iron, locked* * Perforation DA/OD 110 for vertical outlet Accessories Article no. EAN Designation kg SELF-150 Sump unit with galvanised grating, locked SELF-150 Sump unit with galvanised mesh grating, locked SELF-150 Sump unit with slotted cast iron, locked End cap SELF-150 for start/for start of channel End cap SELF-150 with pipe socket DA/OD 160, for end of channel Foul air trap DA/OD Pipe socket DA/OD ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Version Page 4 / 5

5 ANRIN SELF drainage channels Installation instructions The following installation guidelines are schematic representations. These are provided as examples and are nonbinding. The information provided here is based on our long-term experience in excavation and road construction as well as the state-of-the-art technology. Despite this, designers and planners are always obligated to check the products and the installation instructions for their appropriateness. The example details are simplified recommendations for execution. Constructions are to be re-created on a project-specific basis. Important: Insert gratings for the installation. Installation instructions Dig out the trench. Fill in and pre-condense the base course. Connect pipe connections to the pipeline and align the components evenly. Fill concrete bed. Fill concrete, 3 parts sand + 1 part water + 1 part cement, into the base of the trench. Place cover gratings on the channels. Position channel string, sump unit and end cap on the concrete bed. Install paving. The layer should end 2 to 5 mm higher than the cover grating. ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Version Page 5 / 5