Bracket Top Sheet set out typically for straight sheets * System Depth Excluding deck. U Value at 1.5M Centres. 245mm.

Transcription

1 Bracket Top Sheet set out typically for straight sheets * Varies - See Table Varies - See Table Varies See Deck Selection 30 Bracket Height Halter Size Cavity Depth Insulation Thickness Elite System 5 Insulation Value System Depth Excluding deck U Value at 1.5M Centres Nominal Weight/M² Kn RW 100mm 19mm 200mm 245mm Kg/m² 11Kg/m² 120mm 189mm 220mm 25mm Kg/m² 11.Kg/m² 1mm 209mm 2mm 285mm Kg/m² 12.14Kg/m² 10mm 229mm 250 / 20mm 305mm Kg/m² 12.43Kg/m² 180mm 249mm 280mm 325mm Kg/m² 13.2Kg/m² 200mm 29mm 300mm 345mm Kg/m² 13.82Kg/m² 220mm 289mm 320mm 35mm Kg/m² 14.38Kg/m² *Some adjustment of the halter setout for sheets may be required Weight not including deck

2 ELITE SYSTEM 5 SIDE LAP DETAIL ELITE SYSTEM 5 END DETAIL Euroclad Euroseam 0.9mm Stainless Steel Halter (see drawing blocks for detailed drawings) Quattro bar & bracket depending on U Value requirements 1.2m centres 1.mm galvanised tophat Euroclad structural deck Euroclad Euroseam 0.9mm Stainless Steel Halter (see drawing blocks for detailed drawings) Quattro bar & bracket 1.mm galvanised tophat, Rivets can be replaced with screw fixings if appropriate Euroclad structural deck Tophat fixings Rivets are recommended for gauges =/>.7mm mm Self drilling screws recommended for gauges =/>1.25mm Screw fixings specified for tophats can be replaced with rivets if required for aesthetics. Rivets for illustration only. COLOUR SIDE (IF APPLICABLE )

3 Bracket Top Sheet set out typically for straight sheets * Varies - See Table Varies - See Table Varies See Deck Selection 30 Bracket Height Halter Size Cavity Depth Insulation Thickness Elite System 5A1 Insulation Value System Depth Excluding deck U Value at 1.5M Centres Nominal Weight/M² Kn RW 100mm 19mm 150/ mm 245mm Kg/m² 11.4Kg/m² 120mm 189mm mm 25mm Kg/m² 12.30Kg/m² 1mm 209mm mm 285mm Kg/m² 12.8Kg/m² 10mm 229mm mm 305mm Kg/m² 13.42Kg/m² 180mm 249mm mm 325mm Kg/m² 13.98Kg/m² 200mm 29mm 20/ mm 345mm Kg/m² 14.81Kg/m² 220mm 289mm mm 35mm Kg/m² 15.10Kg/m² *Some adjustment of the halter setout for sheets may be required Weight not including deck

4 ELITE SYSTEM 5 SIDE LAP DETAIL ELITE SYSTEM 5 END DETAIL Euroclad Euroseam 0.9mm Stainless Steel Halter (see drawing blocks for detailed drawings) Quattro bar & bracket depending on U Value requirements 1.2m centres Acoustic Insulation 1.mm galvanised tophat Euroclad Euroseam 0.9mm Stainless Steel Halter (see drawing blocks for detailed drawings) Quattro bar & bracket Acoustic Insulation 1.mm galvanised tophat Euroclad perforated structural deck Tophat fixings Rivets are recommended for gauges =/>.7mm mm Self drilling screws recommended for gauges =/>1.25mm Screw fixings specified for tophats can be replaced with rivets if required for aesthetics. Rivets for illustration only. COLOUR SIDE (IF APPLICABLE ) Euroclad perforated structural dec

5 The distributed load from the external sheet is transferred through the spacer system and tophats to the deck. The tophats as illustrated allow the load to be distributed to each and every deck sheet, avoiding any 1 sheet taking all of the load. It also allows spacer rails to be fitted to the deck in straight rows (rather than diagonal). The use of tophats c0mm long allows for ease of installation on curved roofs. In most cases the maximum spacing achieved will not cause any issues for the external sheet load/span capacity. However, some deck sheets with larger widths will result in centres which may become problematic for the external sheet span ie 1120 wide deck giving centres of 2.2M. In such cases other deck profiles should be considered or the use of longer tophats to allow closer centres for the spacer rails to be achieved. In all cases the external sheet load should be distributed to all deck sheets Quattro bar & bracket Tophats fitted over deck sidelaps in main roof zone. Density increased at perimeters if required. 1.mm galvanised tophat, Rivets can be replaced with screw fixings if appropriate DECK SIDE-LAP VARIES DEPENDING ON DECK VERGE DECK SIDE-LAP DECK RUNNING ACROSS SLOPE Euroclad structural deck 1200 EAVES Tophat and Rail centres Upslope determined by loadings and deck cover-width. Typically fixed on each deck sheet for approx 2M from eaves & ridge line and then straddling the deck sidelap in main roof zones at 2 x deck coverwidth. Tophat/Bracket centres along rail determined by loading but typically at 1.2M

6 Quattro bar & bracket 1.mm galvanised tophat, Rivets can be replaced with screw fixings if appropriate Euroclad structural deck VARIES DEPENDING ON LOAD 1200 EAVES

7 1 2 7,2 R2 R2 7, EUROCLAD EUROSEAM 0.9mm EXTERNAL SHEET R, 0, ,3 100 R4, , ,7 51,5 31, ,1 8,5 17 8, ,7 18,5 14 3, 8, ,7 8,9 18,5 19,2 10,4 EUROCLAD STAINLESS STEEL HALTER 24, ,3 18,5 18,5 3

8 VARIES DEPENDING ON BRACKET HEIGHT VARIES DEPENDING ON BRACKET HEIGHT Brackets less than 20mm require 2 fixings diagonally opposite. Brackets 20mm or more require 4 fixings. < 20mm 20mm

9 R R R M100/ M135.1/ ,5, R , R M150/280 M10/ M20/