Made In The USA. Home. Greve. Pienza. Volterra. Technical. Packaging. Merchandising. Contact. (san savino ) the fine art of porcelain stoneware

Transcription

1 Made In The USA glazed porcelain stoneware printing technique

2 greve Click Here for More Information 18"x36" - 20"x20" - greve - 2"x2" Square Mosaic

3 san savino greve glazed porcelain stoneware d printing technique ULPF 18"x36" ULPC 20"x20" ULP9 Decorative Options ULPJ Trims Available ULPM Bullnose 3"x12" ULPQ Cove Base 6"x12" ULPT Cove Base Out Angle 1"x6"

4 pienza Click Here for More Information 18"x36" - 20"x20" - pienza 20"x20"

5 san savino pienza glazed porcelain stoneware d printing technique ULPG 18"x36" ULPD 20"x20" ULPA Decorative Options ULPK Trims Available ULPN Bullnose 3"x12" ULPR Cove Base 6"x12" ULPU Cove Base Out Angle 1"x6"

6 volterra Click Here for More Information 18"x36" - 20"x20" - volterra 18"x36"

7 san savino volterra glazed porcelain stoneware d printing technique ULPH 18"x36" ULPE 20"x20" ULPB Decorative Options ULPL Trims Available ULPP Bullnose 3"x12" ULPS Cove Base 6"x12" ULPV Cove Base Out Angle 1"x6"

8 san savino testing/packaging glazed porcelain stoneware d printing technique packaging Sizes Pcs Sq. Ft. Weight (lbs.) Thickness Sizes Ctn Sq. Ft. Weight (lbs.) Floor Tile 12" x 24" Floor Tile 20" x 20" Floor Tile 18" x 36" " x 12" Compatible Cove Base 6" x 12" Compatible Cove Base Out Angle 1" x 6" 6 1 Compatible Bullnose 3" x 12" Compatible technical ASTM Test Results Floor Tile Floor Tile 20"x20" Floor Tile 18"x36" Characteristics ASTM Standards ASTM Test Results ASTM Test Methods Water Absorption 0.50% 0.50% C373 Frost Resistance As Reported Resistant C1026 Scratch Resistance MOHS MOHS Scale Breaking Strength 250 lbf. >_ 722 lbf. C648 Facial Dimension +/- 3.0% From Nominal Within Standard C499 Thickness 0.04 in (1.02 mm max) Within Standard C499 Wedging (squareness) +/- 0.50% or +/- 2.0 mm** Within Standard C502 Warpage (flatness) +/- 0.75% or +/- 2.3 mm** Within Standard C485 Abrasion Resistance Class 0 - Class V Class IV C1027 DCOF-Dynamic Coefficient of Friction (Wet Areas Only) As Reported Minimum 0.42 DCOF AcuTest SM * Chemical Resistance Class A - Class E Class A C650 Stain Resistance Class A - Class E Class A C1378 Dynamic Coefficient of Friction (DCOF) - Water, oil, grease or other fluids create slippery conditions. When installing floors in areas with exposure to these conditions, a minimum D.C.O.F. value of 0.42 is required. Additionally, extra caution is required with regards to product selection and proper maintenance. Visit for complete information regarding the DCOF Acutest test method and values. *DCOF AcuTest is the industry designation for the test procedure contained in ANSI A137.1 Section 9.6, which has been extensively researched, allows for in-situ field measurements, and is in use at tile manufacturing facilities. It was so named to distinguish it from other DCOF measurements using different instruments and/or protocols. ** Whichever is less Floor Tile Wall Tile d 3d Printing Technique Decorative Tile Trim Available Suitable for Outdoors V4 Substantial Variation Frost Resistant IV Abrasion Resistance DCOF D.C.O.F (Wet Areas) (Minimum 0.42) 21% 21% Minimum Pre-Consumer Recycled Content VOC No VOC Contributes to LEED Credits

9 ULP9 ULPJ * Mosaic - 2"x2" Square *Tile shown not actual size glazed porcelain stoneware printing technique Made In The USA Thickness DCOF 21% V4 IV VOC Floor Wall 3d Printing Decorative Trim Suitable for Substantial Frost Abrasion D.C.O.F (Wet Areas) 21% Minimum No Tile Tile Technique Tile Available Outdoors Variation Resistant Resistance (Minimum 0.42) Pre-Consumer VOC Recycled Content ASTM Test Results (Blank Board) FLOOR TILE DECOS TRIMS (30x60 cm) 3 /8"(10mm) 18"x36" (45x90 cm) 3 /8"(10mm) 20"x20" (50x50 cm) 3 /8"(10mm) (30x30 cm) 3"x12" (8x30 cm) Characteristics ASTM Standards ASTM Test Results ASTM Test Methods Water Absorption 0.50% 0.50% C373 Frost Resistance As Reported Resistant C1026 Scratch Resistance MOHS MOHS Scale Breaking Strength 250 lbf. >_ 722 lbf. C648 Facial Dimension +/-3.0% From Nominal Within Standard C499 Nominal Thickness 0.04 in (1.02 mm max) Within Standard C499 Wedging (squareness) +/- 0.50% or +/- 2.0 mm** Within Standard C502 Warpage (flatness) +/- 0.75% or +/- 2.3 mm** Within Standard C485 Abrasion Resistance Class 0 - Class V Class IV C1027 DCOF-Dynamic Coefficient of Friction (Wet Areas Only) As Reported Minimum 0.42 DCOF AcuTestSM * Chemical Resistance Class A - Class E Class A C650 Stain Resistance Class A - Class E Class A C1378 Dynamic Coefficient of Friction (DCOF) - Water, oil, grease or other fluids create slippery conditions. When installing floors in areas with exposure to these conditions, a minimum D.C.O.F. value of 0.42 is required. Additionally, extra caution is required with regards to product selection and proper maintenance. Visit for complete information regarding the DCOF Acutest test method and values. *DCOF AcuTest is the industry designation for the test procedure contained in ANSI A137.1 Section 9.6, which has been extensively researched, allows for in-situ field measurements, and is in use at tile manufacturing facilities. It was so named to distinguish it from other DCOF measurements using different instruments and/or protocols. ** Whichever is less Bullnose 6"x12" (15x30 cm) Names (colors) (Grey) ULP9 ULPF ULPC ULPJ ULPM ULPQ ULPT (Beige) ULPA ULPG ULPD ULPK ULPN ULPR ULPU (Charcoal) ULPB ULPH ULPE ULPL ULPP ULPS ULPV Cove Base 1"x6" (2.5x30 cm) Cove Base Out Angle glazed porcelain stoneware printing technique Contributes to LEED Credits glazed porcelain stoneware printing technique Sizes Decos 20"x 20" 18"x 36" 12"x 24" 12"x 12" Trims Bullnose Cove Base Cove Base Out Angle 3"x 12" 6"x 12" 1"x 6" Floor Tile V4 Uniform Appearance Wall Tile Frost Resistant d 3d Printing Technique IV Abrasion Resistance Decorative Tile DCOF D.C.O.F. (Wet Areas) (Minimum 0.42) 21% Minimum Pre-Consumer Trim Available 21% Recycled Content Contributes to Suitable for Outdoors VOC No VOC LEED Credits Z561 Made In The USA ULPA ULPK * Mosaic - 2"x2" Square *Tile shown not actual size glazed porcelain stoneware (Blank Board) Made In The USA printing technique glazed porcelain stoneware printing technique Sizes Decos 20"x 20" 18"x 36" 12"x 24" 12"x 12" Trims Bullnose Cove Base Cove Base Out Angle 3"x 12" 6"x 12" 1"x 6" Floor Tile V4 Uniform Appearance Wall Tile Frost Resistant d 3d Printing Technique IV Abrasion Resistance Decorative Tile DCOF D.C.O.F. (Wet Areas) (Minimum 0.42) 21% Minimum Pre-Consumer Trim Available 21% Recycled Content Contributes to Suitable for Outdoors VOC No VOC LEED Credits Z562 ULPB ULPL * Mosaic - 2"x2" Square *Tile shown not actual size (Blank Board) glazed porcelain stoneware printing technique Sizes Decos 20"x 20" 18"x 36" 12"x 24" 12"x 12" Trims Bullnose Cove Base Cove Base Out Angle 3"x 12" 6"x 12" 1"x 6" Floor Tile V4 Uniform Appearance Wall Tile Frost Resistant d 3d Printing Technique IV Abrasion Resistance Decorative Tile DCOF D.C.O.F. (Wet Areas) (Minimum 0.42) 21% Minimum Pre-Consumer Trim Available 21% Recycled Content Contributes to Suitable for Outdoors VOC No VOC LEED Credits Z563 san savino merchandising glazed porcelain stoneware d printing technique Product Overview Brochure Grouted Panel Display Z188 Waterfall Display Z674 San Savino Z675 San Savino Z676 San Savino Description: San Savino Product Overview Size: 8½" x 11" Illustrated Sample Boards Description: Z986 San Savino Brochure Size: 8½"x 11" MADE IN THE USA MADE IN THE USA MADE IN THE USA GREVE ULP9 12 X 24 CUT PIECE Y561 PIENZA ULPA 12 X 24 CUT PIECE Y562 VOLTERRA ULPB 12 X 24 FULL PIECE Y563 GREVE ULPJ 4 X 12 CUT PIECE PIENZA ULPK 4 X 12 CUT PIECE VOLTERRA ULPL 4 X 12 CUT PIECE Description: Z561 San Savino Illustrated Sample Board Size: 25"x 25" Description: Z562 San Savino Illustrated Sample Board Size: 25"x 25" Description: Z563 San Savino Illustrated Sample Board Size: 25"x 25"

10 American Marazzi Tile, Inc. Telephone Headquarters & Manufacturing Plant Fax Clay Road East Sunnyvale, Texas Color and other aesthetic features shown are as close as the limitation of the printing process will allow. We have tried to make this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time, without notice, in colors, materials, packaging, specifications and availability. Since some information may have been updated since time of printing, please check with American Marazzi Tile Customer Service for details American Marazzi Tile, Inc. San Savino Mobile Brochure