POWERFUL PERFORMANCE. High performance Nichia 80+ CRI LEDs provide an optimal light source for tailored lighting design GYPSUM BOARD 8.

Transcription

1 ABSENT

2

3 ABSENT ANATOMY SIMPLIFIED INSTALLATION AND MAINTENANCE Installation methodology designed specifically for small proximity conditions: stress-free installation of the outer housing from in front or below. Tool-less snap-in internal LED trays streamline installation and maintenance. POWERFUL PERFORMANCE High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design DEEP DISTRIBUTION Wide indirect distribution and a high transmissive textured opal lay-in lens delivers understated high performance illumination deep into the room GYPSUM BOARD CORE CAPACITY Integral 0-10V dimming driver down to 1%. Additional options include Lutron, DMX, and DALI control protocols. Integral IOTA slim 12W emergency battery pack provides an easy solution for egress compliance BLIND SCREW MOUNTING EDGELESS PRECISION A 60% recycled aluminum extruded chiseled edge housing forms a precise architectural cove. INTEGRATIONS Integrations is a comprehensive product line comprised of nominal and exact length fixtures, continuous rows, and patterns comprised of 90 illuminated corners. CUSTOM A completely custom ordering process allowing unique modifications and non-90 transitions is available through collaboration with Design Assist. ANATOMY ALIGHTS.COM 3

4 ABSENT PHOTOMETRY LIGHT OUTPUT DISTRIBUTION Indirect Asymmetric OUTPUT LH: High output -10 W/ft LS: Standard output - 5 W/ft C: Custom tuned output - Specify Wattage LIGHT LOSS FACTORS LH: Baseline LS: 50% 4000K: Baseline 3500K: 97% 3000K: 93% 80+CRI: Baseline 90+CRI: 80% PHOTOMETRIC DATA INDIRECT ASYMMETRIC LH K - HTD LENS Lumens: 973 lm/ft Input watts: 9.5 W/ft Efficacy: 102 lm/w LH LS SAMPLE INSTALLATION - CORRIDOR ASYMMETRIC - LH / 4000K Corridor height: 12 ft Reflectance: 80% / 50% / 20% Mounting height: 9 ft A.F.F. (on wall) Fixture length: 12 ft Calculation grid: 2 ft x 2 ft Calculation plane (horizontal): On floor Average Illuminance: 13 fc Uniformity: 1.3:1 (avg/min) TOP VIEW 15 fc 14 fc 13 fc 4 PHOTOMETRY ALIGHTS.COM

5 ABSENT MOUNTING MOUNTING OPTIONS STANDARD PATTERNS (PL) (PU) (R) Direct wall mount (PR) EASE OF INSTALLATION Remove Lens via tooless snap Locate powerfeed and drill hole through the back of the housing, or use knockout on endcap. drilling drywall screws (by others) through the channel located in the safe zone 2 3/8 from edge Attach drywall via 1.5 self drilling drywall screws (by others) 2 3/8 from edge (safe zone) Drilling outside of the safe zone, or use of a longer screw, will result in penetration of the visible Apply drywall mud MOUNTING ALIGHTS.COM 5

6 ABSENT TECHNICAL DATA LINEAR DIMENSIONS Integrations - Nominal or exact lengths to the nearest 1/8th of an inch available as individual fixtures or joined to create continuous row lengths, minimum fixture lengths is 12 inches. Patterns comprised of 90 degree precisely welded fully illuminated corners provide a multitude of geometric options and architectural transitions. Custom - Contact Design Assist for modifications to product not detailed within Elements or Integrations specification sheets. OPTICS HTD lens is a high performance polycarbonate opal lens. An optimized surface texture plus advanced diffusing additives produce an impressive 93% transmission while eliminating LED hotspots. LED LIGHT SOURCE Custom manufactured linear board array uses high performance Nichia LED in combination with a performance driven heat sink technology. Tested in accordance with LM79 and LM-80; L70>60,0000hr; operated at reduced output for high efficacy and lumen maintenance. 3000K, 3500K, and 4000K with 80+ CRI standard; other color temperatures and 90+ CRI available upon request, contact factory. LED color variation maintained at a 3-step MacAdam ellipse (SDCM 3x). LEDs are available in Low, Standard, and High outputs. Refer to photometry for delivered lumens. Custom output available in the range 25% to 125% of high output, contact factory. MOUNTING Fixture housing attaches to wall via drywall screws (by others) through pre-drilled channel in back of fixture. Drywall attaches to bottom of fixture housing via drywall screws (by others) and is mudded over and painted by installing contractor to provide edgeless cove system appearance. Lens and internal gear trays to be removed via tool-less snaps prior to mounting the fixture housing. STRUCTURE Robust, high quality 60% recycled aluminum extruded housing thick aluminum internal gear trays. Flat or flanged aluminum end caps. Aluminum joiner brackets. 4 lbs/ft approximate fixture weight. FINISH Electrostatically applied powder coat finish. Standard finish options include aanium, satin white, and satin black. Other colors and custom finish options available, specify RAL# or contact factory regarding custom finish requirement. WARRANTY Limited defect-free manufactured equipment warranty provided under normal use and proper storage for a period of one (1) year. LED products (LED boards and drivers) will be covered for a period of five (5) years. Please refer to full terms and conditions on our website. LED DIMMING DRIVER Factory tuned constant current electronic 0-10V control dimming driver is standard. Specification grade dimming down to 1%. Driver life of 50,000 hrs with ambient operating temperature range of -30 C to 50 C, maximum case temperature of 75 C. Electrical specifications at maximum driver load: PF >0.9, THD <20%, >85% Efficiency. Other available drivers include Lutron Hi-lume 1% EcoSystem LED Driver (LDE1) with Soft On, Fade to Black dimming technology; and DMX and DALI protocol drivers. Other Lutron and specialty drivers available, contact factory. EMERGENCY This luminaire is provided with a factory installed LED emergency ing battery pack for both normal and emergency operation, v only. This fixture integrated unit contains long-life Ni- Cad recyclable battery, 24 hour charger, and converter circuit. Test switch and charge indicator provided. Test button to be remote located within 3 feet of the luminaire, by others in accordance with local code. Emergency mode provides constant power to a nominal 12W LED load for a period of 90 minutes, delivering 1200 lumens of unwavering illumination throughout the full 90 minute emergency duration. Unless otherwise specified, the emergency battery pack will illuminate one 2 foot end in the direct portion of the fixture. Emergency circuiting provided as a separate circuit from normal power circuit according to NEC requirements, specify circuit length and location. 7 TECHNICAL DATA ALIGHTS.COM