PRODUCT CATALOG

Transcription

1 PRODUCT CATALOG

2 we produce

3 styrofoam

4 ABOUT US The company Plastform Ltd. was founded in 1992, and its core activity is the production of styrofoam for thermal insulation in construction and production of styrofoam packaging used in industry and agriculture. In addition to these products, we also manufacture various decorative elements according to our customers preferences, as well as grossly and finely ground styrofoam and styrofoam granules for production of thermal mortar and light concrete. All products for thermal and acoustic insulation have been attested in Croatia and the European Union, as well as in our laboratory for factory quality control. In 2005, we also introduced the ISO 9001 quality management system. In 2006, we introduced the CE product labeling. Our company s secondary activity is sales of merchandise such as XPS, sandwich panels, waterproofing materials and basic materials for the production of facades. 85% of our products are sold in the domestic and 15% in the EU market. Owing to the new production facility and a 20-year experience of our management and technical staff in the field of EPS, which are supervised by the BVQI, an approved quality management system compliant with the ISO 9001:2008 and environmental protection system ISO 14001:2004, we can guarantee the highest quality of our products and services.

5 SAVINGS AND ECOLOGY The share of fossil fuel spent on heating and cooling of residential and working areas in the total quantity is not negligible. All until recently, no attention was paid to thermal insulation of residential and business premises due to low prices of fossil fuels and to the widespread opinion that their use does not have negative environmental impacts. Unfortunately, we are very well aware of climate change and greenhouse effect which is a result of excessive CO2 emissions into the atmosphere, which occurs due to the combustion of fossil fuels. The simplest way to reduce CO2 emissions is to reduce the amount of energy necessary for heating and cooling. This can also be achieved through thermal insulation of residential and business spaces. In such a way not only is it possible to reduce the amount of CO2 emissions, but also to save a small amount of energy consumed. EPS AND ECOLOGY Plastform Ltd. is the first company in Croatia to have received approval for mechanical recycling of EPS packaging. EPS is an elegant solution for thermal insulation. Why? First of all, because it is cheaper compared to other thermal insulation materials with improved thermal insulationproperties. EPS is not toxic because it does not contain hydrocarbons substituted by halogen elements (such as fluorine and chlorine). Its use saves much more energy than is necessary for its production. The use of EEPS as thermal insulation has a direct impact on the amount of energy necessary for heating and cooling of various spaces. In other words, better insulation reduces the consumption of fuel required for their heating and cooling. We can say that by using EPS as thermal insulation, we indirectly reduce CO2 emissions in the environment, and thus save money and PROTECT THE NATURE. EPS is a 100% recyclable material. EPS does not rot, create mould, promote the growth of microorganisms nor crumble. Plastform Ltd. is the first company in Croatia to have received approval for mechanical recycling of EPS packaging. Therefore, if in your place of living there are EPS collection and recycling centers, please do not throw EPS in places not provided for that purpose, but help us achieve our common goal - preserving THE ENVIRONMENT WE HAVE IN COMMON. It is therefore legitimate to say that EPS (styrofoam ) does not have negative impacts on the environment. On the contrary, due to its primary purpose in construction, which is to save energy, and the possibility of its easy recycling, it is one of the most important factors of environmental protection.

6 FLAT ROOF inclined towards roof tlets Specially tailored PLASTOPOR EPS panels inclined in water drainage direction solve the problem the problem of ponding water on the roof. XPS Extruded polystyrene Extruded polystyrene panels have high thermal insulation properties, low or practically negligible water absorption (insulation of basements), dimensional stability and great compressive strength ( kpa and more). Due to a high compressive strength, they are also suitable to be installed in floors of industrial, commercial and warehouse halls. EXTERNAL WALLS PLASTOPOR EPS F with and without flaps, expanded polystyrene The most economical thermal insulation of external walls for use in external thermal insulation composite systems (ETICS). PLASTOPOR EPS and PLASTOPOR F 100 panels have a high dimensional stability and are completely stable and hardly flammable according to HRN DIN 4102, class B1 or HRN EN , EUROCLASS E. After 40 years of use and introduction of new materials at all levels of the system and practical check-ups of the manner and details of installation, its long-term durability and efficiency can be guaranteed.

7 FLAT ROOF/BALCONY On a flat roof, we recommend to install thermal insulation material PLASTOPOR EPS 150 and EPS 200 PLASTOPOR due to its high resistance to pressure, long-lasting resistance to high temperature, low thermal conductivity and lower water absorption. The choice of PLASTOPOR EPS depends on the purpose of the roof (walkable, non walkable or green roofs). Expanded polystyrene (EPS styrofoam) is the insulation material that has been mostly installed into flat and pitched roofs FLOOR ON THE GROUND Depending on the load/purpose of the foundation, we recommend the installation of thermal insulation material PLASTOPOR EPS 100 (housing), PLASTOPOR EPS 150 and PLASTOPOR EPS 200 (public institutions buildings, manufacturing, etc.). FLOOR BETWEEN FLOORS In order to prevent the spreading of sound between floors (sounds of footsteps, children playing etc.), we recommend installation of PLASTOPOR EPS T specially pressed to achieve lower values of dynamic stiffness or increased elasticity. In addition to acoustic insulation PLATOPOR EPS T, it is also necessary to install PLASTOPOR EPS 100 in order to provide thermal insulation and compressive strength (pressure at the surface).

8 INSULATION Plastopor styrofoam is produced using the newest vacuum technology, therefore their quality entirely meets both the Croatian (HRN EN 13163) and European standards (EN 13163). MARKING LEGEND ACCORDING TO STANDARD HR EN EPS - abbreviation for EXPANDED POLYSTYRENE EN number of European standard for thermal insulation products made of expanded polystyrene Ti - declared class for tolerance Li - declared class for length tolerance Wi - declared class for width tolerance Si - declared class for angularity tolerance Pi - declared class for flatness tolerance DS(N)i - declared class for dimensional stability tolerance BS - declared degree of flexural strength CS (10\Y) - declared compressive strength at 10% deformation SD - declared class for dynamic stiffness CP - declared class for compressibility TR - declared degree of tensile strength perpendicular to surface MARKING LEGEND ACCORDING TO HR EN STANDARD XPS - abbreviation for EXTRUDED POLYSTYRENE EN European standard for thermal insulation product of extruded polystyrene Ti - declared class for tolerance CS (10\Y) - declared compressive strength at 10% deformation TR - declared degree of tensile strength perpendicular to surface DS(TH) - declared dimensional stability at prescribed temperature and relative air humidity WL(T)i - declared level of long-term water absorption at immersion WD(V)i - declared long-term water absorption degree at diffusion MUi - declared diffusion resistance factor in the transition of water vapor MARKING LEGEND ACCORDING TO HRN EN WW-C/3 EPS - three-layer wood wool panels with expanded polystyrene core HRN EN European standard for thermal insulation product made of wood wool Ti - declared class for tolerance Li - declared class for length tolerance Wi - declared class for width tolerance Si - declared class for angularity tolerance Pi - declared class for surface flatness tolerance BS - declared degree of flexural strength TR - declared degree of tensile strength perpendicular to surface Cli - amount of chloride CS(10/Y) - declared compressive strength at 10% deformation FACADE STYROFOAM PROPERTIES: excellent thermal insulator, low factor of resistance to water vapor, specially made without recycled expanded polystyrene, mellow, with ample dimensional stability, a fold prevents the entry of construction adhesive in joints between panels, hardly flammable (higher requirement than self-extinguishing ), Euroclass E, good mechanical properties, no impact on man s health or environment. APPLIED ONLY TO FACADE HEATING SYSTEMS: For use in external thermal insulation composite systems (ETICS), which consist of: PLASTOPOR EPS F thermal insulation panels glued and/or mechanically fixed to a wall, construction adhesive with alkaline coated fiberglass mesh and finishing, decorative plaster facade (facade)

9 PLASTOPOR EPS F AND EPS F WITH FLAPS Bar code (mm) conductivity R D λ d (W/mK) resistence R D m2 in the , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * * Plastopor EPS F preklopni Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,039 W/mK EPS HRN EN T2-L2-W2-S2-P4-DS(70,-)1-DS(N)2-BS100-TR150 PLASTOPOR EPS F GRAPHITE & EPS F GRAPHITE WITH FLAPS Bar code (mm) conductivity R D λ d (W/mK) resistence R D m 2 in the , , EPS HRN EN T2-L2-W2-S2-P4-DS(70,-)1-DS(N)2-BS100-TR150 Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,032 W/mK

10 PLASTOPOR EPS T Bar code (mm) conductivity λ d (W/ mk) resistence R D Dinamička krutost SD (MN/m 3 ) m 2 in the EPS HRN EN T3-L1-W1-S3-CP4-SD30/SD15 PROPERTIES: hardly flammable (higher requirement than self-extinguishing ), Euroclass E, easy installation, good thermal insulation, light-weight, no impact on human health or the environment, not resistant to organic solvents. Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,041 W/mK in floating floors in buildings of all purposes to lower levels of impact sound and rumble in floors between floors and floors on the ground, as well as to prevent the expansion of sound horizontally and vertically. PLASTOPOR EPS 50 (12) Bar code (mm) conductivity R D λ d (W/mK) resistence R D m 2 in the Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,041 W/mK EPS HRN EN T1-L1-W1-S1-P3-DS(N)5-BS75-CS(10)50 PROPERTIES: hardly flammable (higher requirement than self-extinguishing ), Euroclass E, easy installation, sound thermal insulation, light-weight, no impact on human health or the environment, not resistant to organic solvents thermal insulation when load-carrying capacity of panels is not necessary, as for example in: light pitched ventilated roofs and fillers

11 PLASTOPOR EPS 70 (15) Bar code (mm) conductivity R D λ d (W/mK) resistence R D m 2 in the , EPS HRN EN T1-L1-W1-S1-P3-DS(N)5-BS115-CS(10)70 Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,038 W/mK PROPERTIES: excellent thermal insulator, light weight, hardly flammable (higher requirement than self-extinguishing ), Euroclass E, good mechanical properties, insulation, light weight, no impact on human health or the environment, not resistant to organic solvents in interior walls, exterior walls with brick plating, pitched roofs and mansards, massive pitched roofs, ceilings, floors with smaller load, for instance under rather non walkable screed of unused attics and in multilayer construction elements where expected loads do not exceed 70 kpa. It should not be applied in external thermal insulation composite systems - ETICS. Plastopor EPS is applied for that purpose. PLASTOPOR EPS 100 (20) Bar code (mm) conductivity R D λ d (W/mK) resistence R D m 2 in the EPS HRN EN T1-L1-W1-S1-P3-DS(N)5-BS150-CS(10)100 PROPERTIES:: light weight, good thermal insulation, easy installation, hardly flammable (higher demand than selfextinguishable ), Euroclass E, no impact on human health or the environment, not resistant to organic solvents as thermal insulation in flat roofs and floors with medium loads up to 100 kpa (0.1 N/mm2) such as family houses, urban villas, offices etc., and in pitched roofs Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,036 W/mK

12 PLASTOPOR EPS 150 (25) Bar code (mm) conductivity λ d (W/mK) resistence R D m 2 in the Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,035 W/mK EPS HRN EN T1-L1-W1-S1-P3-DS(N)5-BS200-CS(10)150 PROPERTIES: good thermal insulation, light weight, easy installation, hardly flammable (higher demand than selfextinguishing ), Euroclass E, no impact human health or the environment, no resistance to organic solvents as thermal insulation in flat roofs and floors with larger loads up to 150 kpa (0.15 N/mm2), manufacturers of synthetic waterproofing membranes recommend it for flat roofs under these membranes as thermal insulation in refrigerators, terraces, etc. PLASTOPOR EPS 200 (30) Bar code (mm) conductivity R D λ d (W/mK) resistence R D m 2 in the Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,035 W/mK EPS HRN EN T1-L1-W1-S1-P3-DS(N)5-BS250-CS(10)200 PROPERTIES: good thermal insulation, light weight, easy installation, hardly flammable (higher demand than selfextinguishable ), Euroclass E, no impact on human health or the environment, not resistant to organic solvents thermal insulation of building structures whose load does not exceed > 200 kpa (0.20 N/mm2), such as: as flat walkable roofs - parking areas, industrial flooring, floors in refrigerators, sports halls, etc.

13 PLASTOPOR PANELS WITH FLAPS Plastopor panels with flaps easily solve the problem of water drainage in flat roofs by directing water towards outlets. Simply send us a roof plan with marked places for water drainage, and our experts will do all the rest for you. Upon delivery, you will receive laying schemes and marked panels, so laying will not pose any problems whatsoever. Plastopor panels with flaps allow you to solve the problem of ponding water on your roof with quality, speed and simplicity. PROPERTIES: - high compressive strength (100 kpa -200 kpa), - hardly flammable (higher requirement than self-extinguishable), - Euroclass E, no impact on human health and the environment, - not resistant to organic solvents As thermal insulation and slope directing water to water outlets in flat roofs. Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,036-0,035 W/mK PLASTOPOR PLINTH EPS 100 AND PLASTOPOR PLINTH EPS 100 FLAP Width Length (mm) conductivity R D λ d (W/mK) resistence R D m 2 in the Panel dimensions: 1000 x 500 mm conductivity coefficient λ d : 0,037 W/mK PROPERTIES: Plastopor plinth EPS 100 with and without a flap is a thermal insulation panel from expanded polystyrene For thermal insulation: of balconies, terraces and endings of reinforced concrete plates base of the wall - plinth OTHER PRODUCTS: In the product portfolio of Plastform Ltd.you can find all materials necessary for the manufacturing of the entire facade. Such as: Adhesive for bonding EPS (universal or for bonding only) Facade mesh Floor profiles (trims) Aluminum and PVC angle profile with mesh Drip profile Attachers/dowels for EPS and sandwich panels White and colored mortars Construction PE foil

14 WINDOW PROFILES PP 1 PP 2 PP 3 PP 4 PP 5 PP 6 UNDER-WINDOW PROFILES PPP 1 PPP 2 PPP 3 PPP 4 PPP 5 DRIP PROFILES PZO 1 PZO 2 PZO 3 PZO 4 PZO 5 PPP 6 PPP 7 PP

15 DECORATIVE ELEMENTS FOR FACADES Facade panels are available in 1000 x 500 mm and with desired. They can be additionally equipped with staggered flaps and cuts to reduce mechanical tension. 7 PP 8 PP 9 PP10 PP 11 PP 12 PP 13 STONE ABOVE THE WINDOW PPP 8 KIP 1 KIP 2 KIP 3 ANGLE STONE KIP 1 KIP 2 PP 14

16 XPS THERMAL INSULATION PLATES XPS panels are manufactured at and 500 kpa compressive strength and at 10% strain. They are intended to be used as thermal insulation of places with higher mechanical load and facades, for insulation of underground spaces with low water absorption demand. XPS PANELS Width Lenght m2 in the resistence RD [m2k/w] Declared compressive strenght CS(10\Y) [kpa] Declared thermal conductivity λd [W/mK] 20 15,00 0, , ,50 0, , ,50 1,10 0, ,00 1,40 0, ,25 1,70 0, ,75 2,10 0, ,00 2,60 0,038 XPS-HRN EN T1-CS(10\Y)*-DS(TH)-WL(T)0,7-WD(V)3-MU protection of basement floors Fire classification: Euroclass E If ordered, panels are also available in 2500x mm XPS FACADE PANELS Width Lenght m2 in the resistence RD [m2k/w] Declared compressive strenght CS(10\Y) [kpa] Declared thermal conductivity λd [W/mK] 20 15,00 0, , ,50 0, , ,50 1,10 0, ,00 1,40 0, ,25 1,70 0, ,75 2,10 0, ,00 2,60 0, ,25 3,15 0, ,25 3,65 0, ,50 4,20 0, ,50 4,70 0,040 Panel dimensions: x mm XPS-HRN EN T1-CS(10\Y)*-TR400-DS(TH)-WL(T)1,5-MU50 Protection of thermal bridges, thermal protection of facade trims, thermal protection of details, thermal insulation of edges of windows, doors, corners, etc. If ordered, panels are also available in 2500x

17 XPS (extruded polystyrene) is a thermal insulating material the use of which guarantees significant energy savings. It absorbs virtually no water and is resistant to high pressure. The material s closed-cell structure provides high thermal insulation performance and resistance to water absorption. XPS PANEL WITH FLAP K P A Width Lenght m2 in the resistence RD [m2k/w] Declared compressive strenght CS(10\Y) [kpa] Declared thermal conductivity λd [W/mK] 40 7,50 1,10 0, ,00 1,40 0, ,25 1,70 0, ,75 2,10 0, ,00 2,60 0, ,25 3,15 0, ,25 3,65 0, ,50 4,20 0, ,50 4,70 0,040 XPS- HRN EN T1-CS(10\Y)-DS(TH)-WL(T)0,7-WD(V)3-MU protection of upgrades of existing flat roofs, thermal protection in inverted flat and green roofs, thermal protection in the system under the main panel, thermal insulation and protection of gravity basement walls, thermal insulation of pools, thermal protection of trade, warehouse and industrial flooring* If ordered, panels are also available in 2500x Fire classification: Euroclass E XPS PANEL WITH FLAP 500 K P A Width Lenght m2 in the resistence RD [m2k/w] Declared compressive strenght CS(10\Y) [kpa] Declared thermal conductivity λd [W/mK] 80 45,0 2, , ,0 2, , ,5 3, , ,0 3, , ,0 4, , ,0 4, ,038 XPS-HRN EN T1-CS(10\Y)500-DS(TH)-WL(T)0,7-WD(V)3-MU50 protection of flat driving surfaces and parking plateaus, thermal protection of highly loaded large-size industrial flooring, thermal protection of roads and railways, in soils sensible to freezing, thermal protection of flooring of cooling devices, thermal protection of extraordinarily loaded inverted flat roofs, thermal protection extraordinary load-bearing inverted flat green roofs Fire classification: Euroclass E If ordered, panels are also available in 2500x

18 SANDWICH PANELS Sandwich Drvopor panels - for insulation (plating) of concrete columns, beams, walls and concrete ceilings, insulation of exterior and interior constructions SANDWICH PANELS WITH EPS (mm) conductivity R D λ d (W/mK) resistence R D m 2 on Palette WW-C/3 EPS HRN EN L1-W1-T1(T3)-S1-P1-CS(10)75-BS(N)500-CL3-TR15 Panel dimensions: 2000x500 mm conductivity coefficient λ d : 0,039 W/mK Three-layer insulation panel consists of expanded polystyrene (EPS) of flammability class B1, according to HRN DIN 4102 (hardly flammable - larger requirement than self-extinguishable ), and according to HR EN Euroclass E, coated on both sides with a 5 mm layer of wood wool bound with cement. thermal insulation of ceilings above unheated areas or open passages with plating: tie beams, columns, lintels, cornices SANDWICH PANELS WITH ROCK WOOL (mm) conductivity R D λ d (W/mK) resistence R D m 2 on Palette WW-C/3 HRN EN L1-W1-T1(T3)-S1-P1-CS(Y)50-BS(N)500-CL3-TR15 Three-layer insulation consists of rock wool with vertical fibers pertaining to flammability class A1, according to HRN DIN 4102 (non-combustible), and according to HRN EN Euroclass A, coated on both sides with 7.5 mm thick layer of cement-bound wood wool. Panel dimensions: 2000x500 mm conductivity coefficient λ d : 0,040 W/mK thermal insulation of ceilings above unheated areas or open passages; system of construction with plating on both sides: tie beams, columns, lintels, cornices

19 STYROFOAM GRANULES GRANULES Use: production of light-weight concrete and mortar for thermal insulation fillers for furniture fillers GROSSLY GROUND Use: production of light-weight concrete and mortar FINELY GROUND Use: as supplement to mortars OTHER PRODUCTS PLASTOPOR CONTAINERS FOR SEEDLINGS EXPANDED POLYSTYRENE (STYROFOAM) PACKAGING CUTTING OF LABELS AND GRAPHIC ELEMENTS

20 PLASTFORM D.O.O. ŠAŠINOVEC, I.GRANĐE 25, SESVETE TELEFON: FAX: