Percentage BoQ. Validate Print Help. Tender Inviting Authority: S.K. Gupta, Manager (Civil)

Transcription

1 Validate Print Help Percentage BoQ Tender Inviting Authority: S.K. Gupta, Manager (Civil) Name of Work: Repair works at F & B outlets as K4, K6, K7, K8,K10 & Food Court-II and Hall -20 Contract No: Bidder Name : PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the rele are allowed to enter the Bidder Name and Values NUMBER # TEXT # NUMBER # TEXT # NUMBER Sl. No. Item Description Quantity Units Estimated Rate

2 1 2 3 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (a) All kinds of soil (i) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (a) Cement mortar 1:6 (1 cement : 6 coarse sand) metre cum cum Providing and fixing ball bearing for rolling shutters each Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (a) 25 mm thick kg sqm

3 mm cement plaster of mix : (a) 1:6 (1 cement: 6 coarse sand) Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead (a) With cement mortar 1:4 (1 cement : 4 fine sand) sqm sqm sqm Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge. (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (a) White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (a) 15 mm dia nominal bore 2.00 cum sqm each metre (b) 20 mm dia nominal bore metre

4 14 Providing and fixing uplasticised PVC connection pipe with brass unions : (a) 30 cm length (i) 15 mm nominal bore each (ii) 20 mm dia nominal bore each Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : (a) 200 mm diameter Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (a) 15 mm dia nominal bore metre each (b) 20 mm dia nominal bore 5.00 each Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : (a) 200 mm diameter S.W. pipe Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : (a) 150 mm diameter metre metre 35.90

5 19 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (a) With stainless steel cover plate minimum 1.25 mm thickness 5.00 each Providing aluminium tubular handle set of existing patern having 2.50 inch outer dia & 13inch long with SS screws etc.complete as per direction of E-I-C. P/F 19 mm thick commercial board of approved brand & quality ISI make in shelves with screws, nails, fevicol wherever required etc. complete and as per the direction of Engineer Incharge 8.00 each sqm Repairing, oiling & greasing of rolling shutter fixed at various places and of different sizes with wire springs, ball bearings damaged strips, mechanical devices etc. complete including removing the existing shutter and after repairing, re-fixing the same in proper alignment and per the direction of Engineer Incharge (The fitting required for replacement such as wire springs, ball bearings, damaged strips, mechanical devices etc. to be paid separately) Replacement of existing damaged steel wire spring with 0 No. high carbon steel spring & 0.50m long etc, complete and per the direction of Engineer Incharge: sqm each

6 24 25 Spray painting with automotive metallic paint of approved brand and manufactures (Duco or equivalent ) and of desired shades to the existing aluminium/steel frames i/c rubbing to make the surface smooth, applying metallic putty, priming coat with metallic primer of approved quality to given an even shade etc. complete as per the direction of Engineer-in-charge. Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (a) 15 mm dia nominal bore sqm each (b) 20 mm dia nominal bore 4.00 metre Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (a) Granite of any colour and shade. (i) Area of slab upto 0.50 sqm 5.00 sqm

7 27 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced/ plain cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). (a) All works upto plinth level 7.00 cum Note: Tax will be charge extra as applicable. Total in Figures Quoted Rate in Figures Select Quoted Rate in Words

8 event columns, else the bidder is liable to be rejected for this tender. Bidders s only ) NUMBER # TEXT # TOTAL AMOUNT TOTAL AMOUNT In Words 53 55

9 3125 INR Three Thousand One Hundred & Twenty Five Only INR Twenty Seven Thousand Three Hundred & Thirty Two Only INR Ten Thousand Eight Hundred & Fifty Two Only 2634 INR Two Thousand Six Hundred & Thirty Four Only 1849 INR One Thousand Eight Hundred & Forty Nine Only INR Thirty Four Thousand Two Hundred & Forty Two Only

10 22040 INR Twenty Two Thousand &Forty Only INR Fourteen Thousand Two Hundred & Fifty Six Only INR Twelve Thousand Three Hundred & Ninety Only 1785 INR One Thousand Seven Hundred & Eighty Five Only 2005 INR Two Thousand &Five Only 3324 INR Three Thousand Three Hundred & Twenty Four Only 7450 INR Seven Thousand Four Hundred & Fifty Only 8398 INR Eight Thousand Three Hundred & Ninety Eight Only

11 601 INR Six Hundred & One Only 659 INR Six Hundred & Fifty Nine Only 6932 INR Six Thousand Nine Hundred & Thirty Two Only 826 INR Eight Hundred & Twenty Six Only 943 INR Nine Hundred & Forty Three Only INR Twelve Thousand Six Hundred & Seventy Three Only 539 INR Five Hundred & Thirty Nine Only

12 10195 INR Ten Thousand One Hundred & Ninety Five Only 8280 INR Eight Thousand Two Hundred & Eighty Only INR Fourteen Thousand One Hundred & Fifty Seven Only INR Fifteen Thousand Six Hundred & Sixty Seven Only INR Fifteen Thousand Three Hundred & Thirty Two Only

13 11524 INR Eleven Thousand Five Hundred & Twenty Four Only 2129 INR Two Thousand One Hundred & Twenty Nine Only 2626 INR Two Thousand Six Hundred & Twenty Six Only INR Nineteen Thousand Three Hundred & Thirty Only

14 44073 INR Forty Four Thousand &Seventy Three Only INR Three Lakh Eighteen Thousand One Hundred & Sixty Eight Only 0.00 INR Zero Only INR Zero Only