List of products of harmonised standards Code 21: INTERNAL & EXTERNAL WALL AND CEILING FINISHES. INTERNAL PARTITION KITS

Transcription

1 List of products of harmonised standards Code 21: INTERNAL & EXTERNAL WALL AND CEILING FINISHES. INTERNAL PARTITION KITS As internal or external finishes, as complete elements, d for fire Protection of walls or ceilings EN 8-7 EN 90 High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes Concrete roofing tiles and fittings for roof covering and wall cladding Product specifications The Health, safety and energy saving requirements for compact laminate panels/sidings or HPL composite panels/sidings for interior or external wall and ceiling finishes (including suspended ceilings) Concrete roofing tiles and fittings for pitched roof coverings and wall cladding and lining Compact laminate and HPL composite panels for internal and external wall and ceiling finishes ceilings for all s other than those described above For s subject to reaction to fire 1,, 1,, For s subject to external fire Concrete roofing tiles and fittings, and M/122 performance For s subject to on performance 1,,, EN 92 Fibre-cement slates and fittings Fibre-cement slates and fittings (with a height dimension not exceeding 850 mm) for in roofing, internal wall finishes, external wall and ceiling finishes As roof coverings subject to on As roof coverings for all other s Fibre-cement slates and fittings and M/122 1,, ceilings for all other s mentioned in the For s subject to reaction to fire 1,, Flat and profiled sheets (as roof coverings) For s subject to external fire performance For s subject to on, EN 9 Fibre-cement profiled sheets and fittings Fibre-cement profiled sheets and their fibrecement fittings for in roofing, internal wall finishes, external wall and ceiling finishes For s other than those specified above 1,, and M/122

2 Suspended ceilings, tiles, panels ceilings for all other s mentioned in the For s subject to reaction to fire 1,, EN 5 EN 5 Corrugated bitumen sheets Bitumen shingles with mineral and/or synthetic reinforcements For s subject to external fire Corrugated bitumen sheets Corrugated bitumen sheets performance and M/122 Bitumen shingles with mineral and/or synthetic reinforcements prior to them being laid on the roof For s subject to on For s other than those specified above For s subject to reaction to fire For s subject to external fire, Bitumen shingles performance and M/122 For s subject to in regulated substances For s other than those specified above, 1,, Flat and profile sheets performance, EN 101 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings. These are single skin sheets which are d as a single layer or assembled to form a multiple layer construction. Panels As roof coverings subject to on For s other than those specified above 1,, and M/122 ceilings for all other s mentioned in the 1,, performance, Clay roofing tiles and fittings Clay roofing tiles and fittings for pitched roof As roof coverings subject to on For s other than those specified above

3 EN 10 Clay roofing tiles and fittings Product definitions and specifications coverings and internal and external wall cladding and lining Clay roofing tiles and fittings and M/122 1,, ceilings for all other s mentioned in the As internal or external ceilings subject to safety in requirements against accidental fall of objects onto transit areas EN 169 Natural stone products Slabs for cladding Requirements Slabs of natural stone that are made for as cladding for internal and external finishes 1,, Slabs for cladding ceilings for all other s mentioned in the Rigid flooring products for internal s 1,, Rigid flooring products for external s 1,, EN Natural stone products Modular tiles Requirements Flat modular tiles of natural stone which are made for internal and/or external s as floorings, stairs ans wall and ceiling finishes Tiles of natural stone ceilings subject to on dangerous M/119 and substances In internal or external suspended ceilings subject to safety in requirements ceilings for other s mentioned in the For s subject to reaction to fire 1,, Roofing slates For s subject to resistance to fire For s subject to external fire performance, EN Slate and stone for discontinuous roofing and external cladding Part 1: Specifications for slate and carbonate slate Slate and carbonate slate for discontinuous roofing and external cladding As roof coverings subject to on As roof coverings for all other s 1,, and M/122

4 Tiles ceilings for all other s mentioned in the 1,, EN 1267 Fibre-cement flat sheets Fibre-cement flat sheets, siding shingles and planks Suspended ceilings, tiles, panels ceilings for all other s mentioned in the EN Plastics Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes The Health and safety requirements for unplasticized poly(vinyl chloride) (PVC-U) profiles for interior and exterior wall and ceiling finishes for buildings 1,, Sidings ceilings subject to on dangerous substances ceilings for all other s mentioned in the As internal finishes in ceilings d for fire protection of ceilings As internal finish in ceilings subject to safety in requirements Suspended ceilings (kits) reaction to fire 1,, As internal finishes in ceilings for all other s mentioned in the EN 196 Suspended ceilings Suspended ceilings sold as a complete kit, substructures placed on the market as kits, individual components of such substructures, and membrane components Suspending frames To support internal suspended ceilings subject to safety in requirements To support internal suspended ceilings subject to reaction to fire To support internal suspended ceilings for all other s mentioned in the 1,, To support internal suspended ceilings subject to safety in requirements requirements against aciidental injuries from cutting objects

5 Tiles, panels reaction to fire 1,, As internal finishes in ceilings for all other s mentioned in the EN 1986 Wood-based panels for in construction Characteristics, evaluation of conformity and marking Wood-based panels, unfaced, overlaid, veneered or coated Wood-based panels, unfaced, overlaid, veneered or coated Structural elements in internal or external applications Non-structural elements in internal or external applications M/11 EN 126 Gypsum elements for suspended ceilings Definitions, requirements and test methods Characteristics and performance of factory made cast gypsum elements for suspended ceilings For suspended ceilings for fire protection of Gypsum ceilings elements substructures and acoustic performance and M/106 For intended s not mentioned above Floor tiles For external s, to cover external pedestrian and vehicular circulation areas For internal s including enclosed public transport premises 1,, EN 111 Ceramic tiles Definitions, classification, characteristics, evaluation of conformity and marking Ceramic tiles produced by extrusion and drypressing techniques, d for internal and/or external floorings, including stairs Wall tiles As internal or external finishes in walls subject to reaction to fire As internal or external finishes in walls, as relevant, subject to on 1,, M/119 and As internal or external finishes in walls for other s mentioned in the For s subject to resistance to fire (e.g. fire compartmentation) performance 1,,, EN 1509 Self-supporting double skin metal faced insulating panels Factory made products Specification Self-supporting double skin metal faced insulating sandwich panels, which are intended for discontinuous laying in the following applications: - roofs and roof cladding - external walls and wall cladding - walls (including partitions) and ceilings within the building envelope As roof coverings subject to on As roof coverings for all other s Factory made sandwich panels As internal or external finishes, as complete elements, d for fire Protection of walls or and M/122 ceilings 1,,

6 ceilings for all other s mentioned in the EN 1716 Stretched ceilings Characteristics, specifications and test methods for stretched ceilings made up of single or multilayer sheets, coated fabrics or fabrics made up of coated or monofilament yarn with a fastening system Ceiling coatings Internal finishes of ceilings subject to reaction to fire Internal finishes of ceilings for the other characteristics 1,, Internal and external walls, ceilings and roofs subject to reaction to fire, EN 1782 Self-supporting metal sheet for roofing, external cladding and internal lining Product specification and requirements Self-supporting metal sheets and tiles (for nonstructural applications) prefabricated for roofing and wall cladding and lining Self-supporting metal sheets and tiles External roofs subject to external fire performance End s subject to regulatory requirements on regulated, and M/122 End s other than those above 1,, performance, As roof coverings subject to on EN 178 Fully supported metal sheet and strip for roofing, external cladding and internal lining Product specification and requirements Metal coil, strip, and flat sheets and factory made pieces for fully supported applications in roofing and wall cladding or lining As roof coverings for all other s Flat and profiled sheets and M/122 1,, ceilings for all other s mentioned in the EN 1915 Solid wood panelling and cladding Characteristics, evaluation of conformity and marking Characteristics and test methods for products d in solid wood panelling and cladding for internal or external Solid wood panelling and cladding For s subject to reaction to fire For s subject to on 1,, For s other than those mentioned above EN Decorative wall coverings Roll and panel form Wallcovering products in roll and panel form supplied for hanging onto internal walls, partitions or ceilings, by means of an adhesive, whose primary purpose is decorative Wallcovering products in roll and panel form As internal finishes subject to reaction to fire As internal finishes for other end s mentioned in the 1,, Requirements and test methods for cladding slabs As internal or external finishes in walls subject to reaction to fire 1,,

7 EN Agglomerated stone Slabs and tiles for wall finishes (internal and external) q g and tiles of agglomerated stone of length or width up to 500 mm which are made for as internal and external wall finishes and are either fixed mechanically or glued by adhesive or mortar As internal or external finishes in walls, as Tiles and cladding slabs relevant, subject to on As internal or external finishes for other s mentioned in the 1,, Flat and profile sheets performance, EN 1615 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external in roofs, walls and ceilings Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external in roofs, walls and ceilings Panels As roof coverings subject to on As roof coverings for all other s As external finishes in ceilings subject to reaction to fire 1,, and M/122 1,, Flat and profile sheets performance, EN 1620 Light transmitting flat solid polycarbonate (PC) sheets for internal and external in roofs, walls and ceilings Requirements for light transmitting flat solid polycarbonate (PC) sheets for internal and external in roofs, walls and ceilings As roof coverings subject to on As roof coverings for all other s Panels As external finishes in ceilings subject to reaction to fire 1,,