Page 1 of 5 STATE BANK OF INDIA COMMERCIAL BRANCH - ERNAKULAM (NEW PREMISES) Name of Work

Transcription

1 Page 1 of 5 STATE BANK OF INDIA COMMERCIAL BRANCH - ERNAKULAM (NEW PREMISES) Name of Work Sealed bid format for the interior furnishing work of SBI, Commercial Branch, Ernakulam(2ND FLOOR) Name and Address of the Contractor ESTIMATE FOR INTERIOR FURNISHING WORKS OF COMMERCIAL BRANCH, ERNAKULAM Sl No. Description of work Quantity Unit Rate Amount 1 DGM TABLE The size of the table is 220 x 90 X75 cm which is made of 25 mm thick postform finish at top and 19mm thick plywood (IS 303) finished with 1.0mm thick laminate on outer sides. The table top is provided with 12mm thick edge polished glass. The 3 nos. Of Drawers using fascia in postform, outer box with 19 mm plywood and rest with 12mm thick plywood (IS 303). PVC Keyboard tray, CPU stand and provisions of wire manager are to be given. Footrest with countrywood 7.5cm X 2.5cm should be provided. The edges should be provided with necessary lippings. Necessary fittings such as multi purpose locks for drawers, PVC Keyboard & drawer slides, handles, wire manager etc. are to be provided. The inner portion of the table to be painted with enamel paint of 2 coats over one coat of wood primer. 1a Table of similar specifications but with size 180 x 80 x 75 cms 5 No. 2 Officers Table 14 No. The size of the table is 150x75 X75 cm which is made of 25 mm thick postform finish at top and 19mm thick plywood (IS 303) finished with 1.0mm thick laminate on outer sides. The table top is provided with 12mm thick edge polished glass. The 3 nos. Of Drawers using fascia in postform, outer box with 19 mm plywood and rest with 12mm thick plywood (IS 303). PVC Keyboard tray, CPU stand and provisions of wire manager are to be given. Footrest with countrywood 7.5cm X 2.5cm should be provided. The edges should be provided with necessary lippings. Necessary fittings such as multi purpose locks for drawers, PVC Keyboard & drawer slides, handles, wire manager etc. are to be provided. The inner portion of the table to be painted with enamel paint of 2 coats over one coat of wood primer.

2 3 Side Table Page 2 of 5 The table is made of 19mm thick plywood (IS 303) finished with 1mm thick laminate on the other exposed faces as shown. 25 mm thick postformed / edgebanded top is to be provided. File racks should be provided with 19mm thick plywood door shutters and necessary lippings. CPU stand is provided in the side table. The inner sides are painted with 2 coats of enamel paint over a coat of wood primer. The table top is to be provided with 12mm thick glass. a) Size 120 X No. b) Size 150 X No. 4 Low level Storage 32 Sq.M Free standing storage with shutters in 19mm thick marine ply in postformed laminate finish. 19Mm thick marine ply for verticals and base & back 9mm thick Marine ply. Back to be flush with external surface of the storage unit, with beech wood lipping on all exposed edges, 25mm thk top postformed laminate adjustable shelves at approximately 40C/C with 19mm Marine ply and all necessary fittings like brush finished adjustable handles, aluminium channels, rollers Godrej/Hafle/ebco make locks, melamine coated beech wood skirting 10cm X 1cm etc. Rate to be inclusive of cost of materials, labour, wastage, transportation, necessary scaffolding, etc complete. Cabinets inside to have 2 coats of enamel paint over 1 coat of primer base. 5 Fully glazed Door 6.00 Sq.M Providing and fixing frameless fully glazed 12mm thk toughened float glass fixed with necessary patch fittings (Dorma make) including cutting, making holes, cutouts in the glass of required shape and size to accommodate fittings and fixing the fittings in floors, soffits, jams including necessary fixtures, screws, sealant wherever required and SS cover over patch fittings. Rate shall include necessary etching film / LOGO, approved patch fitting locking systems, 1 pair of 600mm long S. S. (H Shape) Handles of approved make, floor springs (2 nos), and any necessary hardware items.( DORMA MAKE Top Pivot - PT 24, Top Patch Fittings - PT 20, Bottom Patch fittings - PT 10, Floor Spring - BTS 75 V, Corner lock with strike plate and Euro Profile Cylinder - US 10, Handle - TG DIH600-32mm dia X 600mm length) / enox fittings

3 Page 3 of 5 6 Fully Glazed - Fixed Glass Partition - Patch Fittings - Providing and fixing of fixed glass partitions with 12mm thick toughened glass using PT Standard fittings like PT 90/PT 92 of Dorma make at the top and bottom including cutting, making holes in glass and fixing the fittings in floors, ceilings etc and making the same good with necessary screws, 3M Vinyl sticker as per approved, colour, design Sq.M and pattern, sealants etc.complete. Item includes fixing frameless 12 mm thick toughened glass door with necessary patch fittings / handles etc. complete 7 False Ceiling Supplying and fixing suspended false ceiling with 12.5mm thick gypsum board over standard 18g GI 60cm Sq.M c/c, including perimeter channels strictly as per the specifications of 'India Gypsum' to correct lines and levels finished with two coats of plastic emulsion paint of approved make and shade with roller application including providing necessary openings for electrical fittings, security device etc. 8 Plaster of Paris Cornices RM Supplying and fixing Plaster of Paris cornices of width 4 below false ceiling and filling up the joints including all materials and labour for fixing including painting 2 coats with plastic emulsion paint over a priming coat. 8 Column Panelling Sq.M 9 The frame work of column panelling should be of country wood (Thambakam, Chadachi) 5cm X 5cm both horizontally and vertically at 600mm c/c. 9mm thick plywood with 1mm thick laminate is then screwed to the 6mm thick plywood and design work to be done.teak / Beech wood polished beadings are to be provided. Skirting for a height of 10cm with 12mm thick teak wood planks with melamine matt finish should be provided. Painting Applying two coats of good quality plastic emulsion paint over one coat of putty for the walls 10 Applying two coats of good quality plastic emulsion paint for the walls Sq.M Sq.M

4 11 Laminated Partition Page 4 of 5 Providing and fixing partition made of 2" X 2" good quality wood frame at 2'-0" c/c both ways. Alternate vertical member above the false ceiling shall continue upto the RCC ceiling. Bottom member shall be 4" X 2" for skirting. The skirting shall be 3" high and provided with 10mm commercial board / ply, finished with 1mm thick laminate of approved shade on both sides. The Teak wood frame shall be fixed rigidly at floor level as well as RCC ceiling bottom. The frame shall be provided with 6mm thick commercial ply with 1.0mm thick approved shade laminate on both sides of the frame. All wood shall be coated with fire resistant paint. The item includes 1 1/4 " thick door shutter in partition made of 3" X 1" good quality wood frame at 1'-0" c/c both ways, 6mm thick commercial ply with laminate shall be fixed on both sides of frame with teak wood edging out of 1 1/4" X 3/4" all around the shutter. The rate includes necessary hardwares such as hinges, tower bolt, 6 lever locks (Godrej) etc. All exposed Teak wood shall be stained to approved colour and finished with melamine ( 2 or more coats of APCOLITE). The rate includes making provision for electric conduits and switch boxes Sq.M 12 Laminated / Glazed Partition Sq.M Same as item no. 11, but 6mm thick clear glass at 3'0" height to 7'height in place of plywood and laminate to be fixed with teak wood beading 30 X 20 mm complete with melamine polish on teak wood surface. Item inlcludes cost of etching etc. complete. 13 Semi Partitions Sq.M The partitions are made of 8 mm thick glass to be fixed firmly to the beech / teak wood frame of size 5X5 cm polished with melamine matt finish for a height of 75cm above the solid partition The bottom portion of the counter partition is of double skin type for a height of 75cm (as per Bank's instruction) from the finished floor level. In the frame work, verticals and horizontals are made of country wood 5cm X 5cm to a maximum distance of 60cm and two verticals at edges with 5cm X 5cm teak wood. Frame work is covered with 6mm thick plywood (IS 303) on both sides and finished with 1mm thick laminate of approved make. The partition is firmly fixed to the floor. The edges of the glass to be polished.

5 Page 5 of 5 14 Provide and fix 'Everite' make floor spring 6.00 No. 15 Brick work in CM 1: 6 with country burnt brick of size 22.9x11.2x7 cm for superstructure 16 Plastering with cement mortar 1:5 (1cement 5 sand) 12mm thick, one coat floated hard and travelled smooth for the wall surfaces including all staging works, watering,curing etc. complete. 17 Providing and fixing good quality hard wood door shutter of clear size 80 X 200 cm with all necessary hardwares such as hinges, godrej lock etc complete. 18 Providing and fixing good quality hard wood door frame of size 5 x 7.5 cm 19 Supplying and laying 1st quality glazed wall tiles of size 1'x 1'approved clour and brand for the toilet upto 1.6 mtr height, make johnson/ bell or equivalent size Height of toilet cladding 2.10 m 20 Supplying and laying 1st quality antiskid tiles of size 1'x 1' of approved colour and brand for the toilets. Make Johnson/ bell or equivalent size 21 Providing and fixing at site floor mounting type Euoropean water closet and its all fittings with necessary bend, check nut etc and ceramic standard flushing cistern CP brass screws, a pair of CI chair brackets with nuts, bolts and washers complete (parryware make C0237 or equivalent) 22 Providing and fixing at site health faucet parryware make T9940A1 or equivalent 23 Providing and fixing towel rod make parryware or equivalent 24 Providing and fixing floor trap with SS gratings. Rate includes material cost and labour charges 25 Cum 200 Sq.M 3 No. 3 No. 13 Sq.M 3 Sq.M 25 Provide/ fix the following with all required fixtures and ancilliary works a) 25 mm PVC pipe (4Kg/ Cm2 grade, pasting type) for water 10 RM lines b) 20 mm PVC pipe for water lines 15 RM c) 100 mm 4 Kg/ cm2 grade PVC waste pipes 10 RM 26 55x40 cm wash hand basin ivory colour with all fittings including 15 mm cp pillar tap, brackets, PVC connection, 15 mm cp stop cock etc mm cp longbody tap 28 Providing and fixing sintex brand PVC door with frame of size about 90 x 210 cms with all fittings TOTAL GST 18% GRAND TOTAL